ASTM B 117 : 2019
Current
Current
The latest, up-to-date edition.
Standard Practice for Operating Salt Spray (Fog) Apparatus
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
10-12-2019
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
G 01
|
| DocumentType |
Standard Practice
|
| Pages |
11
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This practice covers the apparatus, procedure, and conditions required to create and maintain the salt spray (fog) test environment. Suitable apparatus which may be used is described in Appendix X1.
1.2This practice does not prescribe the type of test specimen or exposure periods to be used for a specific product, nor the interpretation to be given to the results.
1.3The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| SAE AMS2428A:2021 | Plating, Cobalt-Phosphorus, Nanocrystalline AMS2428A |
| ASME A112.36.2/CSA B79.2:2022 | Cleanouts |
| SAE AMS2469L:2024 | Hard Anodic Coating on Aluminum and Aluminum Alloys |
| SAE J530:2024 | Automotive Pipe Fittings |
| SAE AS7510B:2023 | Coupling Assembly, Threadless, Flexible, Self-Locking, Fixed Cavity, High Conductivity, Self-Bonding, Part Specification |
| ASTM F 1003 : 2019 | Standard Specification for Searchlights on Motor Lifeboats |
| ASTM B 696 : 2000 : R2023 | Standard Specification for Coatings of Cadmium Mechanically Deposited |
| ASTM F 1975 : 2015 : R2023 | Standard Specification for Nonpowered Bicycle Trailers Designed for Human Passengers |
| ASTM F 2453/F2453M : 2014 : R2019 | Standard Specification for Welded Wire Mesh Fence Fabric (Metallic-Coated or Polymer Coated) for Meshes of 6 in.<sup>2</sup> [3871 mm<sup>2</sup>] or Less, in Panels or Rolls, with Uniform Meshes |
| ASTM B 201 : 1980 : R2019 | Standard Practice for Testing Chromate Coatings on Zinc and Cadmium Surfaces |
| ASTM D 429 : 2014 : R2023 | Standard Test Methods for Rubber Property—Adhesion to Rigid Substrates |
| ASTM F 1774 : 2020 | Standard Specification for Climbing and Mountaineering Carabiners |
| ASTM D 2803 : 2009 : R2020 | Standard Guide for Testing Filiform Corrosion Resistance of Organic Coatings on Metal |
| ASTM F 2832 : 2011 : R2021 | Standard Guide for Accelerated Corrosion Testing for Mechanical Fasteners |
| ASTM F 1178 : 2011 : R2022 | Standard Specification for Performance of Enameling System, Baking, Metal Joiner Work and Furniture |
| ASTM F 3019/F3019M : 2019 | Standard Specification for Chromium Free Zinc-Flake Composite, with or without Integral Lubricant, Corrosion Protective Coatings for Fasteners |
| ASTM F 2589 : 2016 : R2021 | Standard Specification for Ornamental Fences Employing Steel Tubular Pickets |
| ASTM D 3794 : 2022 | Standard Guide for Testing Coil Coatings |
| ASTM A 975 : 2023 | Standard Specification for Double-Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating) |
| ASTM D 3322 : 2023 | Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal |
| ASTM A 755/A755M : 2018 | Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products |
| ASTM F 883 : 2013 : R2022 | Standard Performance Specification for Padlocks |
| ASTM F 2917 : 2012 : R2018 | Standard Specification for Bicycle Trailer Cycles Designed for Human Passengers |
| ASTM D 1735 : 2021 | Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus |
| ASTM F 2957 : 2013 : R2019 : EDT 1 | Standard Specification for Ornamental Aluminum Fence Systems |
| ASTM A 967/A967M : 2017 | Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts |
| ASTM F 2892 : 2018 | Standard Specification for Performance Requirements for Soft Toe Protective Footwear (Non-Safety / Non-Protective Toe) |
| ASTM B 537 : 2022 | Standard Practice for Rating of Electroplated Panels Subjected to<brk/> Atmospheric Exposure |
| ASTM D 8514/D8514M : 2023 | Standard Specification for Flexible, Retroreflective Sheeting for Use in High Visibility Vehicle Markings |
| ASTM F 1136/F1136M : 2011 : R2019 | Standard Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners |
| ASTM D 5367 : 2016 : R2021 | Standard Practice for Evaluating Coatings Applied Over Surfaces Treated With Inhibitors Used to Prevent Flash Rusting of Steel When Water or Water/Abrasive Blasted |
| ASTM A 947M : 2016 | Standard Specification for Textured Stainless Steel Sheet [Metric] |
| ASTM B 107/B107M : 2013 : R2021 | Standard Specification for Magnesium-Alloy Extruded Bars, Rods, Profiles, Tubes, and Wire |
| ASTM D 7270 : 2007 : R2021 | Standard Guide for Environmental and Performance Verification of Factory-Applied Liquid Coatings |
| ASTM D 8112 : 2022 | Standard Guide for Obtaining In-Service Samples of Turbine Operation Related Lubricating Fluid |
| ASTM B 695 : 2021 | Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel |
| ASTM C 1047 : 2019 | Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base |
| ASTM F 2413 : 2018 | Standard Specification for Performance Requirements for Protective (Safety) Toe Cap Footwear |
| ASTM B 699 : 1986 : R2021 : EDT 1 | Standard Specification for Coatings of Cadmium Vacuum-Deposited on Iron and Steel |
| ASTM F 381 : 2016 | Standard Safety Specification for Components, Assembly, Use, and Labeling of Consumer Trampolines |
| ASTM B 994/B994M : 2022 | Standard Specification for Nickel-Cobalt Alloy Coating |
| ASTM D 7893 : 2013 : R2018 | Standard Guide for Corrosion Test Panel Preparation, Testing, and Rating of Coil-Coated Building Products |
| ASTM B 853 : 2016 : R2021 : EDT 1 | Standard Specification for Powder Metallurgy (PM) Boron Stainless Steel Structural Components |
| ASTM B 816 : 2000 : R2021 | Standard Specification for Coatings of Cadmium-Zinc Mechanically Deposited |
| ASTM E 1529 : 2022 | Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies |
| ASTM B 580 : 1979 : R2019 | Standard Specification for Anodic Oxide Coatings on Aluminum |
| ASTM A 1055/A1055M : 2022 | Standard Specification for Zinc and Epoxy Dual-Coated Steel Reinforcing Bars |
| ASTM D 2059/D2059M : 2003 : R2022 | Standard Test Method for Resistance of Zippers to Salt Spray (Fog) |
| ASTM F 852/F852M : 2022 | Standard Specification for Portable Gasoline, Kerosene, and Diesel Containers for Consumer Use |
| ASTM G 85 : 2019 | Standard Practice for Modified Salt Spray (Fog) Testing |
| ASTM A 1124/A1124M : 2023 | Standard Specification for Textured Epoxy-Coated Steel Reinforcing Bars |
| ASTM D 3451 : 2006 : R2017 | Standard Guide for Testing Coating Powders and Powder Coatings |
| ASTM A 972/A972M : 2000 : R2021 | Standard Specification for Fusion Bonded Epoxy-Coated Pipe Piles |
| ASTM B 840 : 2022 | Standard Specification for Electrodeposited Coatings of Zinc Cobalt Alloy Deposits |
| ASTM F 1387 : 2023 | Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings |
| ASTM D 333 : 2001 : R2021 | Standard Guide for Clear and Pigmented Lacquers |
| ASTM F 2363/F2363M : 2017 : R2023 | Standard Specification for Sewage and Graywater Flow Through Treatment Systems |
| ASTM E 866 : 2023 | Standard Specification for Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels |
| ASTM F 1137/F1137M : 2019 | Standard Specification for Phosphate/Oil Corrosion Protective Coatings for Fasteners |
| ASTM F 2412 : 2018 : REV A | Standard Test Methods for Foot Protection |
| ASTM F 1755M : 1996 : R2018 | Standard Specification for Solid State Bargraph Meters for Shipboard Use (Metric) |
| ASTM B 999 : 2015 : R2022 | Standard Specification for Titanium and Titanium Alloys Plating, Electrodeposited Coatings of Titanium and Titanium Alloys on Conductive and Non-Conductive Substrate |
| ASTM F 3059 : 2018 | Standard Specification for Fiber-Reinforced Polymer (FRP) Gratings Used in Marine Construction and Shipbuilding |
| ASTM C 1401 : 2023 | Standard Guide for Structural Sealant Glazing |
| ASTM B 842 : 2023 | Standard Specification for Electrodeposited Coatings of Zinc Iron Alloy Deposits |
| ASTM B 912 : 2002 : R2018 | Standard Specification for Passivation of Stainless Steels Using Electropolishing |
| ASTM D 2485 : 2022 | Standard Test Methods for Evaluating Coatings For High Temperature Service |
| ASTM E 1826 : 2023 | Standard Specification for Low Volatile Organic Compound (VOC) Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels |
| ASTM B 921 : 2008 : R2023 | Standard Specification for Non-hexavalent Chromium Conversion Coatings on Aluminum and Aluminum Alloys |
| ASTM G 198 : 2017 : R2023 | Standard Test Method for Determining the Relative Corrosion Performance of Driven Fasteners in Contact with Treated Wood |
| ASTM F 1941/F1941M : 2016 | Standard Specification for Electrodeposited Coatings on Mechanical Fasteners, Inch and Metric |
| ASTM F 2548 : 2020 | Standard Specification for Expanded Metal Fence Systems for Security Purposes |
| ASTM B 893 : 2023 | Standard Specification for Hard-Coat Anodizing of Magnesium for Engineering Applications |
| ASTM F 2919/F2919M : 2012 : R2018 | Standard Specification for Welded Wire Mesh Fence Fabric (Metallic-Coated or Polymer Coated) with Variable Mesh Patterns or Meshes Greater than 6 in.<sup>2</sup > [3871 mm<sup>2</sup>] in Panels |
| ASTM E 865 : 2020 | Standard Specification for Structural Film Adhesives for Honeycomb Sandwich Panels |
| ASTM B 995 : 2015 : REV A : R2021 | Standard Test Method for Chloride Resistance Test for Chromium Electroplated Parts (Russian Mud Test) |
| ASTM F 3393 : 2020 : EDT 1 | Zinc-Flake Coating Systems for Fasteners |
| ASTM A 775/A775M : 2022 | Standard Specification for Epoxy-Coated Steel Reinforcing Bars |
| ASTM A 1004/A1004M : 1999 : R2018 | Standard Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing Members |
| ASTM A 950/A950M : 2011 : R2023 | Standard Specification for Fusion-Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling |
| ASTM B 635 : 2000 : R2023 | Standard Specification for Coatings of Cadmium-Tin Mechanically Deposited |
| ASTM B 940 : 2005 : R2020 | Standard Practice for Testing Non-Chromate Coatings on Zinc and Cadmium Surfaces |
| ASTM B 449 : 1993 : R2022 | Standard Specification for Chromates on Aluminum |
| ASTM B 633 : 2023 | Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel |
| ASTM C 1503 : 2018 | Standard Specification for Silvered Flat Glass Mirror |
| ASTM F 2833 : 2011 : R2017 | Standard Specification for Corrosion Protective Fastener Coatings with Zinc Rich Base Coat and Aluminum Organic/Inorganic Type |
| ASTM E 2484 : 2008 : R2015 | Standard Specification for Multi-Story Building External Evacuation Controlled Descent Devices (Withdrawn 2024) |
| ASTM F 1428 : 2023 | Standard Specification for Aluminum Particle-Filled Basecoat/Organic or Inorganic Topcoat, Corrosion Protective Coatings for Fasteners |
| ASTM B 200 : 2022 | Standard Specification for Electrodeposited Coatings of Lead and Lead-Tin Alloys on Steel and Ferrous Alloys |
| ASTM F 1956 : 2020 | Standard Specification for Rescue Carabiners |
| ASTM B 380 : 1997 : R2023 | Standard Test Method for Corrosion Testing of Decorative Electrodeposited Coatings by the Corrodkote Procedure |
| ASTM F 626 : 2014 : R2023 | Standard Specification for Fence Fittings |
| ASTM D 3963/D3963M : 2021 | Standard Specification for Fabrication and Jobsite Handling of Epoxy-Coated Steel Reinforcing Bars |
| ASTM A 856/A856M : 2003 : R2020 | Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire |
| ASTM F 1625 : 2000 : R2018 | Standard Specification and Test Method for Rear-Mounted Bicycle Child Carriers |
| ASTM F 1546 : 2023 | Standard Specification for Fire Hose Nozzles |
| ASTM A 934/A934M : 2022 | Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars |
| ASTM D 896 : 2004 : R2017 | Standard Practice for Resistance of Adhesive Bonds to Chemical Reagents |
| ASTM E 2568 : 2017 : REV A | Standard Specification for PB Exterior Insulation and Finish Systems |
| ASTM D 6577 : 2015 : R2019 | Standard Guide for Testing Industrial Protective Coatings |
| ASTM C 635/C635M : 2022 | Standard Specification for Manufacture, Performance, and Testing of Metal Suspension Systems for Acoustical Tile and Lay-in Panel Ceilings |
| ASTM B 766 : 2023 | Standard Specification for Electrodeposited Coatings of Cadmium |
| ASTM E 3343/E3343M : 2023 | Test Methods for Nonballistic-resistant Helmets Worn by Law Enforcement and Corrections |
| ASTM B 650 : 2023 | Standard Specification for Electrodeposited Engineering Chromium Coatings on Ferrous Substrates |
| ASTM F 1271 : 1990 : R2023 | Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications |
| ASTM A 974 : 1997 : R2021 | Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic-Coated or Polyvinyl Chloride (PVC) Coated) |
| ASTM A 882/A882M : 2020 | Standard Specification for Filled Epoxy-Coated Seven-Wire Steel Prestressing Strand |
| ASTM F 2408 : 2016 : R2023 | Standard Specification for Ornamental Fences Employing Galvanized Steel Tubular Pickets |
| ASTM C 1513 : 2018 | Standard Specification for Steel Tapping Screws for Cold-Formed Steel Framing Connections |
| ASTM D 6675 : 2023 | Standard Practice for Salt-Accelerated Outdoor Cosmetic Corrosion Testing of Organic Coatings on Automotive Sheet Steel |
| SAE AMS3379A:2013(S2023) | Sealing Compound, Polysulfide Rubber Performed Strips for Sealing Removable Doors, Skins, and Panels(STABILIZED Aug 2023) |
| AS 2699.2:2020 | Built-in components for masonry construction Connectors and accessories |
| ASTM B 368 : 2009 : R2014 | Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test) |
| ASTM D 609 : 2017 : R2022 | Standard Practice for Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products |
| ASTM E 691 : 2020 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM E 70 : 2019 | Standard Test Method for pH of Aqueous Solutions With the Glass Electrode |
| ASTM E 691 : 2019 : EDT 1 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM E 691 : 2023 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM E 691 : 2022 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM E 691 : 2009 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM B 368 : 2021 | Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test) |
| AS 2699.1:2020 | Built-in components for masonry construction Wall ties |
| ASTM E 691 : 2021 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM G 85 : 1998 | Standard Practice for Modified Salt Spray (Fog) Testing |
| AS 2699.3:2020 | Built-in components for masonry construction Lintels and shelf angles (durability requirements) |
| ASTM D 609 : 2017 | Standard Practice for Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products |
| ASTM D 1654 : 2024 | Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments |
| ASTM E 70 : 2024 | Standard Test Method for pH of Aqueous Solutions With the Glass Electrode |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.