ASTM B 107/B107M : 2013 : REDLINE
Current
The latest, up-to-date edition.
Standard Specification for Magnesium-Alloy Extruded Bars, Rods, Profiles, Tubes, and Wire
English
01-11-2013
CONTAINED IN VOL. 02.02, 2017 Describes magnesium-alloy extruded bars, rods, profiles, tubes, and wire of the composition.
Committee |
B 07
|
DevelopmentNote |
Supersedes ASTM B 107M. (04/2002)
|
DocumentType |
Redline
|
Pages |
20
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
Supersedes |
1.1This specification covers magnesium-alloy extruded bars, rods, profiles, tubes, and wire of the composition given in Table 1.
1.2The values stated in either inch-pound or SI units are to be regarded separately as standards. The SI units are shown in brackets or in separate tables or columns. The values stated in each system are not exact equivalents; therefore, each system must be used independent of the other. Combining values from the two systems may result in nonconformance with the specification.
1.3Unless the order specifies the “M” specification designation, the material shall be furnished to the inch-pound units.
MIL-DTL-3922 Revision E:2016 | FLANGES, WAVEGUIDE, GENERAL PURPOSE, GENERAL SPECIFICATION FOR |
ASTM D 897 : 2008 : R2016 | Standard Test Method for Tensile Properties of Adhesive Bonds |
ASTM D 950 : 2003 | Standard Test Method for Impact Strength of Adhesive Bonds |
ASTM B 951 : 2011 | Standard Practice for Codification of Unalloyed Magnesium and Magnesium-Alloys, Cast and Wrought |
MIL F 3922 : B | FLANGE, WAVEGUIDE, GENERAL PURPOSE GENERAL SPECIFICATION FOR |
MS27769 Revision B:2011 | PLUG, PIPE, COUNTERSUNK HEX HEAD |
F-T-2907 Revision A:2006 | TANKS, POTABLE HOT WATER STORAGE |
ASTM B 881 : 2017 : REDLINE | Standard Terminology Relating to Aluminum- and Magnesium-Alloy Products |
SAE J 466 : 2018 | MAGNESIUM WROUGHT ALLOYS |
MIL-STD-186 Revision F:2002 | PROTECTIVE FINISHING SYSTEMS FOR ROCKETS, GUIDED MISSILES, SUPPORT EQUIPMENT AND RELATED MATERIALS |
MIL-DTL-85-1 Revision H:2014 | Waveguides, Rigid, Rectangular |
ASTM F 3160 : 2016 | Standard Guide for Metallurgical Characterization of Absorbable Metallic Materials for Medical Implants |
ASTM E 2375 : 2016 : REDLINE | Standard Practice for Ultrasonic Testing of Wrought Products |
ASTM D 950 : 2003 : R2011 | Standard Test Method for Impact Strength of Adhesive Bonds |
MIL-C-23217 Revision B:1969 | COATING, ALUMINUM, VACUUM DEPOSITED (ASG) |
SAE ARP 6256 : 2014 | MAGNESIUM ALLOYS IN AIRCRAFT SEATS - ENGINEERING DESIGN AND FABRICATION RECOMMENDED PRACTICES |
MIL-DTL-85 Revision K:2011 | WAVEGUIDES, RIGID, RECTANGULAR - GENERAL SPECIFICATION FOR |
ASTM D 897 : 2008 | Standard Test Method for Tensile Properties of Adhesive Bonds |
ASTM B 666/B666M : 2015 : REDLINE | Standard Practice for Identification Marking of Aluminum and Magnesium Products |
ASTM B 557 : 2015 : REDLINE | Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products |
ASTM B 953 : 2013 : REDLINE | Standard Practice for Sampling Magnesium and Magnesium Alloys for Spectrochemical Analysis |
ASTM E 527 : 2016 : REDLINE | Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS) |
ASTM B 557M : 2015 : REDLINE | Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products (Metric) |
ASTM B 951 : 2011 | Standard Practice for Codification of Unalloyed Magnesium and Magnesium-Alloys, Cast and Wrought |
ASTM B 660 : 2015 : REDLINE | Standard Practices for Packaging/Packing of Aluminum and Magnesium Products |
ASTM B 954 : 2015 : REDLINE | Standard Test Method for Analysis of Magnesium and Magnesium Alloys by Atomic Emission Spectrometry |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.