ASTM A 703/A703M : 2020 : REV A
Current
The latest, up-to-date edition.
Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts
Hardcopy , PDF
English
16-11-2020
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
A 01
|
| DocumentType |
Standard
|
| Pages |
13
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This specification2 covers a group of common requirements that, unless otherwise specified in an individual specification, shall apply to steel castings for pressure-containing parts under each of the following ASTM specifications:
| Title of Specification | ASTM Designation | |
| Steel Castings, Carbon, Suitable for Fusion Welding, | A216/A216M | |
| for High-Temperature Service | ||
| Steel Castings, Martensitic Stainless and Alloy, for | A217/A217M | |
| Pressure-Containing Parts, Suitable for High- | ||
| Temperature Service | ||
| Castings, Austenitic, for Pressure-Containing | A351/A351M | |
| Parts | ||
| Steel Castings, Ferritic and Martensitic, for Pressure- | A352/A352M | |
| Containing Parts, Suitable for Low-Temperature | ||
| Service | ||
| Steel Castings, Alloy, Specially Heat-Treated, for | A389/A389M | |
| Pressure-Containing Parts, Suitable for High- | ||
| Temperature Service | ||
| Steel Castings Suitable for Pressure Service | A487/A487M | |
| Castings, Iron-Nickel-Chromium and Nickel | A990/A990M | |
| Alloys, Specially Controlled for Pressure-Retaining Parts for Corrosive Service | ||
| Castings, Austenitic-Ferritic (Duplex) | A995/A995M | |
| Stainless Steel, for Pressure-Containing Parts | ||
1.2This specification also covers a group of supplementary requirements which may be applied to the above specifications as indicated therein. These are provided for use when additional testing or inspection is desired and apply only when specified individually by the purchaser in the order.
1.3In case of conflict between the requirements of the individual specification and this general specification, the former shall prevail.
1.4The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM E 94/E94M : 2017 | Standard Guide for Radiographic Examination Using Industrial Radiographic Film |
| ASTM A 370 : 2021 | Standard Test Methods and Definitions for Mechanical Testing of Steel Products |
| ASTM A 351/A351M : 2024 | Standard Specification for Castings, Austenitic, for Pressure-Containing Parts |
| ASTM A 352/A352M : 2021 | Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service |
| ASTM A 352/A352M : 2018 : REV A | Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service |
| ASTM E 340 : 2015 | Standard Practice for Macroetching Metals and Alloys |
| ASTM A 370 : 2024 : REV A | Standard Test Methods and Definitions for Mechanical Testing of Steel Products |
| ASTM E 29 : 2013 : R2019 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
| ASTM A 389/A389M : 1993 : R1998 | Standard Specification for Steel Castings, Alloy, Specially Heat-Treated, for Pressure-Containing Parts, Suitable for High-Temperature Service |
| ASTM A 216/A216M : 2021 | Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service |
| ASTM A 800/A800M : 1991 : R1997 : EDT 1 | Standard Practice for Steel Casting, Austenitic Alloy, Estimating Ferrite Content Thereof |
| ASTM A 941 : 2023 | Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys |
| ASTM A 488/A488M : 2018 : EDT 2 | Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel |
| ASTM E 709 : 2015 | Standard Guide for Magnetic Particle Testing |
| ASTM E 29 : 2002 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
| ASTM A 1058 : 2019 | Standard Test Methods for Mechanical Testing of Steel Products—Metric |
| ASTM A 487/A487M : 2020 | Standard Specification for Steel Castings Suitable for Pressure Service |
| ASTM A 990/A990M : 2020 | Standard Specification for Castings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled for Pressure-Retaining Parts for Corrosive Service |
| ASTM A 1080/A1080M : 2019 | Standard Practice for Hot Isostatic Pressing of Steel, Stainless Steel, and Related Alloy Castings |
| ASTM A 903/A903M : 1999 : R2017 | Standard Specification for Steel Castings, Surface Acceptance Standards, Magnetic Particle and Liquid Penetrant Inspection |
| ASTM E 354 : 2021 | Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys |
| ASTM A 903/A903M : 1999 : R2024 | Standard Specification for Steel Castings, Surface Acceptance Standards, Magnetic Particle and Liquid Penetrant Inspection |
| ASTM A 351/A351M : 2018 : EDT 1 | Standard Specification for Castings, Austenitic, for Pressure-Containing Parts |
| ASTM E 709 : 2021 | Standard Guide for Magnetic Particle Testing |
| ASTM A 941 : 2022 | Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys |
| ASTM E 125 : 1963 : R2018 | Standard Reference Photographs for Magnetic Particle Indications on Ferrous Castings |
| ASTM E 353 : 2019 : EDT 1 | Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys |
| ASTM A 1067/A1067M : 2012 : REV A : R2018 | Standard Specification for Test Coupons for Steel Castings |
| ASTM E 165/E165M : 2023 | Standard Practice for Liquid Penetrant Testing for General Industry |
| ASTM E 280 : 2015 : R2019 : EDT 1 | Standard Reference Radiographs for Heavy-Walled (4<fraction><num>1</num><den>2</den></fraction > to 12 in. (114 to 305 mm)) Steel Castings |
| ASTM E 125 : 1963 : R2023 | Standard Reference Photographs for Magnetic Particle Indications on Ferrous Castings |
| ASTM E 340 : 2023 | Standard Practice for Macroetching Metals and Alloys |
| ASTM A 751 : 2021 | Standard Test Methods and Practices for Chemical Analysis of Steel Products |
| ASTM A 488/A488M : 2024 | Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel |
| ASTM A 216/A216M : 2018 | Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service |
| ASTM A 217/A217M : 2020 | Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service |
| ASTM A 370 : 2020 | Standard Test Methods and Definitions for Mechanical Testing of Steel Products |
| ASTM A 609/A609M : 1991 : R1997 | Standard Practice for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof |
| ASTM A 941 : 2024 : REV A | Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys |
| ASTM A 991/A991M : 2017 | Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products |
| ASTM A 370 : 2023 | Standard Test Methods and Definitions for Mechanical Testing of Steel Products |
| ASTM E 354 : 2021 : EDT 1 | Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys |
| ASTM A 1080/A1080M : 2024 | Standard Practice for Hot Isostatic Pressing of Steel, Stainless Steel, and Related Alloy Castings |
| ASTM A 609/A609M : 2012 : R2018 | Standard Practice for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof |
| ASTM A 941 : 2022 : REV A | Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys |
| ASTM E 94/E94M : 2022 | Standard Guide for Radiographic Examination Using Industrial Radiographic Film |
| ASTM E 208 : 2020 : EDT 1 | Standard Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels |
| ASTM A 990/A990M : 2023 | Standard Specification for Castings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled for Pressure-Retaining Parts for Corrosive Service |
| ASTM A 217/A217M : 2022 | Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service |
| ASTM A 487/A487M : 1993 : R1998 | Standard Specification for Steel Castings Suitable for Pressure Service |
| ASTM A 609/A609M : 2012 : R2023 | Standard Practice for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof |
| ASTM A 751 : 2020 | Standard Test Methods and Practices for Chemical Analysis of Steel Products |
| ASTM A 370 : 2011 | Standard Test Methods and Definitions for Mechanical Testing of Steel Products |
| ASTM A 941 : 2024 | Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys |
| ASTM A 990/A990M : 2021 | Standard Specification for Castings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled for Pressure-Retaining Parts for Corrosive Service |
| ASTM E 280 : 2021 | Standard Reference Radiographs for Heavy-Walled (4<fraction><num>1</num><den>2</den></fraction > to 12 in. (114 to 305 mm)) Steel Castings |
| ASTM A 802/A802M : 1995 : R1996 | Standard Practice for Steel Castings, Surface Acceptance Standards, Visual Examination |
| ASTM A 941 : 2009 | Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys |
| ASTM E 354 : 2014 | Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys |
| ASTM A 370 : 2022 | Standard Test Methods and Definitions for Mechanical Testing of Steel Products |
| ASTM A 991/A991M : 2022 | Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products |
| ASTM E 353 : 2019 | Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys |
| ASTM E 208 : 2020 | Standard Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels |
| ASTM A 487/A487M : 2021 | Standard Specification for Steel Castings Suitable for Pressure Service |
| ASTM A 941 : 2018 | Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys |
| ASTM E 165/E165M : 2018 | Standard Practice for Liquid Penetrant Testing for General Industry |
| ASTM A 370 : 2024 | Standard Test Methods and Definitions for Mechanical Testing of Steel Products |
| ASTM A 1067/A1067M : 2012 : REV A : R2024 | Standard Specification for Test Coupons for Steel Castings |
| ASTM A 487/A487M : 2024 | Standard Specification for Steel Castings Suitable for Pressure Service |
| ASTM E 29 : 2022 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.