ASTM A 525 : 1993
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Specification for General Requirements for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process (Withdrawn 1994)
Available format(s)
Hardcopy , PDF
Withdrawn date
01-01-1994
Language(s)
English
Published date
31-12-2010
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL 01.06 Describes general requirements for the delivery of steel sheet in coils and cut lengths, zinc-coated (galvanized) on continuous lines by the hot-dip process.
| DevelopmentNote |
Supersedes FED STD 48 (02/2004)
|
| DocumentType |
Standard
|
| Pages |
6
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Withdrawn
|
| Supersedes |
| CGA 6.14 : 2015 | AUTOMATIC DAMPER DEVICES FOR USE WITH GAS-FIRED APPLIANCES |
| ANSI Z21.19-2014/CSA 1.4-2014 | REFRIGERATORS USING GAS FUEL |
| CSA/ANSI Z21.86-2016/CSA 2.32-2016 | Vented gas-fired space heating appliances |
| ASTM E 842 : 1982 | Specification for Lawn Buildings (Withdrawn 1990) |
| ASCE 9 91 : 1991 | STANDARD PRACTICE FOR CONSTRUCTION AND INSPECTION OF COMPOSITE SLABS |
| DD-M-411 Revision C:1990 | |
| MIL B 45367 : AA NOTICE 1 | BUSES, MOTOR: TRANSIT, AMBULANCE CONVERSION, FORWARD CONTROL, WITH HIGH HEADROOM, 30 AND 44 PASSENGER, 2 WHEEL DRIVE |
| KKK-B-1579 Revision B:1985 | BUSES, MOTOR: SCHOOL, WITH HIGH HEADROOM, 20-, 28-, 36-, 44-, 58-PASSENGER, TWO-WHEEL DRIVE |
| A-A-3002 Base Document:1996 | |
| MIL-H-18158 Revision E:1990 | HOSE ASSEMBLY, AIR DUCT, LOW PRESSURE, FABRIC, WIRE STIFFENED, RETRACTABLE, NAVAL SHIPBOARD PORTABLE VENTILATING SET USE |
| MIL-B-29176 Revision B:1990 | BUILDING, PREFABRICATED, STEEL ARCH, DECONTAMINATION CENTER |
| F-F-2790 Base Document:1991 | FILTER, AIR EXTENDED AREA, INITIAL INSTALLATION |
| A-A-265 Revision A:1993 | MOPPING OUTFIT, FLOOR |
| MIL-N-52110 Revision F:1982 | NOZZLE, FUEL & OIL SERVICING, NONAUTOMATIC SHUTOFF & NOZZLES, FUEL SERVICING AUTOMATIC SHUTOFF |
| MIL-B-52489 Revision E:1987 | BARBED TAPE, CONCERTINA |
| MIL-STD-808 Revision A:1983 | FINISH, MATERIALS AND PROCESSES FOR CORROSION PREVENTION AND CONTROL IN SUPPORT EQUIPMENT |
| ANSI Z83.20 : 2016 | GAS-FIRED TUBULAR AND LOW-INTENSITY INFRARED HEATERS |
| CSA/ANSI Z21.40.1 : 1996 : R2012 | GAS-FIRED, HEAT ACTIVATED AIR CONDITIONING AND HEAT PUMP APPLIANCES |
| CSA C22.2 No. 9.0 : 1996 : INC : SUP P1 : 1997 : R2016 | GENERAL REQUIREMENTS FOR LUMINAIRES |
| CSA 12.6 :2004 | VEHICLE REFUELLING APPLIANCES |
| CSA N288.3.2 : 1985 | HIGH EFFICIENCY AIR CLEANING ASSEMBLIES FOR NORMAL OPERATION OF NUCLEAR FACILITIES |
| ASTM F 872 : 1984 : R1990 | Specification for Filter Units, Air Conditioning: Viscous-Impingement Type, Cleanable (Withdrawn 1999) |
| ASCE 24 98 : 2000 | FLOOD RESISTANCE DESIGN AND CONSTRUCTION |
| API 552 : 1994 | TRANSMISSION SYSTEMS |
| CSA/ANSI Z21.40.1 : 1996 : INC : ADD A : 1997 : R2017 | GAS-FIRED, HEAT ACTIVATED AIR CONDITIONING AND HEAT PUMP APPLIANCES |
| CSA 2.3 : 2016 | GAS-FIRED CENTRAL FURNACES |
| ASTM E 489 : 1992 : R1997 | Standard Test Method for Tensile Strength Properties of Metal Connector Plates (Withdrawn 2005) |
| ASTM A 825 : 1984 | Specification for Steel Sheet, Composite Coated for Corrugated Steel Sewer Pipe and Bin Type Retaining Walls (Withdrawn 1989) |
| ASTM A 526/A526M : 1990 | Withdrawn 1994: Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process, Commercial Quality |
| ANSI Z21.47 : 2016 | GAS-FIRED CENTRAL FURNACES |
| ANSI Z21.40.2 : 1996 : INC : ADD A : 1997 : R2017 | GAS-FIRED, WORK ACTIVATED AIR-CONDITIONING AND HEAT PUMP APPLIANCES (INTERNAL COMBUSTION) |
| ANSI Z21.40.2 : 1996 : INC : ADD A : 1997 : R2012 | GAS-FIRED, WORK ACTIVATED AIR-CONDITIONING AND HEAT PUMP APPLIANCES (INTERNAL COMBUSTION) |
| CSA B140.10 : 2006 | OIL-FIRED WARM-AIR HEATING APPLIANCES FOR MOBILE HOUSING AND RECREATIONAL VEHICLES |
| ANSI Z21.19 : 2014 | REFRIGERATORS USING GAS FUEL |
| CSA 2.21 : 1985 : R2015 | GAS-FIRED APPLIANCES FOR OUTDOOR INSTALLATION |
| CSA LC 3 : 2000(R2005) | APPLIANCE STANDS AND DRAIN PANS |
| CSA/ANSI Z83.19-2017/CSA 2.35-2017 | Gas-fired high-intensity infrared heaters |
| CSA C22.2 No. 9.0 : 1996 : R2011 | GENERAL REQUIREMENTS FOR LUMINAIRES |
| CSA/ANSI Z21.40.1 : 1996 : INC : ADD A : 1997 : R2012 | GAS-FIRED, HEAT ACTIVATED AIR CONDITIONING AND HEAT PUMP APPLIANCES |
| CSA/ANSI Z21.40.1 : 1996 | GAS-FIRED, HEAT ACTIVATED AIR CONDITIONING AND HEAT PUMP APPLIANCES |
| ANSI Z83.20-2016/CSA 2.34-2016 | Gas-fired tubular and low-intensity infrared heaters |
| CSA 2.21 : 1985 : R2004 | GAS-FIRED APPLIANCES FOR OUTDOOR INSTALLATION |
| CSA 12.6 : 2004 : R2014 | VEHICLE REFUELLING APPLIANCES |
| CSA/ANSI Z21.96 : 2014 | PORTABLE WATER HEATERS FOR OUTDOOR USE |
| CSA 11-6 : 2014 | PORTABLE WATER HEATERS FOR OUTDOOR USE |
| CSA/ANSI/IAS U.S. LC 2 : 1996 | DIRECT GAS-FIRED CIRCULATING HEATERS FOR AGRICULTURAL ANIMAL CONFINEMENT BUILDINGS |
| ASME A112.6.4 : 2003 : R2008 | ROOF, DECK, AND BALCONY DRAINS |
| ASME A112.6.4 : 2003 : R2012 | ROOF, DECK, AND BALCONY DRAINS |
| API 11PGT : 1992 | RECOMMENDED PRACTICE FOR PACKAGED COMBUSTION GAS TURBINES |
| CSA/ANSI/IAS U.S. LC 2 : 1996 : INC : ADD A : 1998 : R2015 | DIRECT GAS-FIRED CIRCULATING HEATERS FOR AGRICULTURAL ANIMAL CONFINEMENT BUILDINGS |
| ASME A112.6.4 : 2003 | ROOF, DECK, AND BALCONY DRAINS |
| NASA KSC SPEC F 0009 : 1988 | DESIGN, FABRICATION, AND ERECTION OF SIGNS AT JOHN F. KENNEDY SPACE CENTER, SPECIFICATION FOR |
| CSA/ANSI Z21.66 : 2015 | AUTOMATIC DAMPER DEVICES FOR USE WITH GAS-FIRED APPLIANCES |
| MIL-STD-129 Revision R:2014 | Military Marking for Shipment and Storage |
| FED-STD-123 Revision H:2007 | MARKING FOR SHIPMENT (CIVIL AGENCIES) |
| ASTM A 700 : 2014 | Standard Guide for Packaging, Marking, and Loading Methods for Steel Products for Shipment |
| MIL-STD-163 Revision C:1978 | STEEL MILL PRODUCTS PREPARATION FOR SHIPMENT AND STORAGE |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.