ASTM A 517/A517M : 2017 : REDLINE
Current
The latest, up-to-date edition.
Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered
English
06-11-2017
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 01.04, 2017 Defines high-strength quenched and tempered alloy steel plates intended for use in fusion welded boilers and other pressure vessels.
| Committee |
A 01
|
| DevelopmentNote |
Supersedes ASTM A 517 (06/2000)
|
| DocumentType |
Redline
|
| Pages |
4
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
1.1This specification2 covers high-strength quenched and tempered alloy steel plates intended for use in fusion welded boilers and other pressure vessels.
1.2This specification includes a number of grades as manufactured by different producers, but all having the same mechanical properties and general characteristics.
1.3The maximum thickness of plates furnished under this specification shall be as follows:
| Grade | Thickness |
| A, B | 1.25 in. [32 mm] |
| H, S | 2 in. [50 mm] |
| P | 4 in. [100 mm] |
| F | 2.50 in. [65 mm] |
| E, Q | 6 in. [150 mm] |
1.4The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system is to be used independently of the other without combining values in any way.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| NASA SSTD 8070 0019 : 2015 | WELDING PROCEDURE FOR ASTM A514 (B) HSLA (T-1 STEEL) PLATE & PIPE - MAXIMUM 2-INCH MATERIAL THICKNESS |
| AWS A5.23/A5.23M : 2011 | SPECIFICATION FOR LOW-ALLOY STEEL ELECTRODES AND FLUXES FOR SUBMERGED ARC WELDING |
| ASTM A 592/A592M : 2010 : R2015 | Standard Specification for High-Strength Quenched and Tempered Low-Alloy Steel Forged Parts for Pressure Vessels |
| ASTM A 592/A592M : 2010 | Standard Specification for High-Strength Quenched and Tempered Low-Alloy Steel Forged Parts for Pressure Vessels |
| NACE 5A192 : 2004 | INTEGRITY OF EQUIPMENT IN ANHYDROUS AMMONIA STORAGE AND HANDLING |
| ASTM G 81 : 1997 : REV A : R2013 | Standard Test Method for Jaw Crusher Gouging Abrasion Test |
| ASME PV CODE 2C : 2017 | BOILER AND PRESSURE VESSEL CODE - MATERIALS - SPECIFICATIONS FOR WELDING RODS, ELECTRODES, AND FILLER METALS |
| ASME B31.4 : 2016 | PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES |
| AWS A5.5/A5.5M : 2014 | SPECIFICATION FOR LOW-ALLOY STEEL ELECTRODES FOR SHIELDED METAL ARC WELDING |
| ASTM A 671 : 2009 | Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures |
| ASTM G 81 : 1997 : REV A : R2002 : EDT 1 | Standard Test Method for Jaw Crusher Gouging Abrasion Test |
| ASTM G 81 : 1997 : REV A | Standard Test Method for Jaw Crusher Gouging Abrasion Test |
| NASA KSC STD Z 0005 : 1988 | DESIGN OF PNEUMATIC GROUND-SUPPORT EQUIPMENT, STANDARD FOR |
| AWWA D100 : 2011 | WELDED CARBON STEEL TANKS FOR WATER STORAGE |
| ASTM G 81 : 1997 : REV A : R2007 | Standard Test Method for Jaw Crusher Gouging Abrasion Test |
| AWS D5.2 : 1984 | WELDED STEEL ELEVATED TANKS, STANDPIPES, AND RESERVOIRS FOR WATER STORAGE, STANDARD FOR, |
| ASME STS 1 : 2011 | Steel Stacks (STS-1 - 2011) |
| ASTM A 435/A435M : 2017 : REDLINE | Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates |
| ASTM A 577/A577M : 2017 : REDLINE | Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates |
| ASTM A 578/A578M : 2017 : REDLINE | Standard Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special Applications |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.