ASTM A 336/A336M : 2023
Current
The latest, up-to-date edition.
Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts
Hardcopy , PDF
English
06-11-2023
Committee |
A 01
|
DocumentType |
Standard
|
Pages |
8
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
Supersedes |
1.1This specification2 covers ferritic steel forgings for boilers, pressure vessels, high-temperature parts, and associated equipment.
1.2Forgings made of steel grades listed in Specification A335/A335M may also be ordered under this specification. The chemical, tensile, heat treatment, and marking requirements of Specification A335/A335M shall apply, except the forging shall conform to the chemical requirements of Tables 1 and 2 of Specification A335/A335M only with respect to heat analysis. On product analysis they may deviate from these limits to the extent permitted in Table 1 of this specification.
1.3Supplementary Requirements S1 to S10 are provided for use when additional testing or inspection is desired. These shall apply only when specified individually by the purchaser in the order.
1.4Unless the order specifies the applicable “M” specification designation, the material shall be furnished to the inch-pound units.
1.5Specification A336/A336M formerly included austenitic steel forgings, which are now found in Specification A965/A965M.
1.6The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined.
1.7This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM A 182/A182M : 2023 | Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service |
ASTM A 965/A965M : 2021 : REV A | Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts |
ASTM A 788/A788M : 2023 | Standard Specification for Steel Forgings, General Requirements |
ASTM A 335/A335M : 2023 | Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service |
ASTM A 965/A965M : 2024 | Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts |
ASTM A 370 : 2024 : REV A | Standard Test Methods and Definitions for Mechanical Testing of Steel Products |
ASTM A 965/A965M : 2023 | Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts |
ASTM A 335/A335M : 2024 : REV A | Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service |
ASTM A 788/A788M : 2024 | Standard Specification for Steel Forgings, General Requirements |
ASTM A 788/A788M : 2024 : REV A | Standard Specification for Steel Forgings, General Requirements |
ASTM E 165/E165M : 2023 | Standard Practice for Liquid Penetrant Testing for General Industry |
ASTM A 275/A275M : 2023 | Standard Practice for Magnetic Particle Examination of Steel Forgings |
ASTM A 335/A335M : 2024 | Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service |
ASTM A 370 : 2023 | Standard Test Methods and Definitions for Mechanical Testing of Steel Products |
ASTM A 335/A335M : 2024 : REV B | Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service |
ASTM A 965/A965M : 2021 : REV A | Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts |
ASTM A 275/A275M : 2018 : R2023 | Standard Practice for Magnetic Particle Examination of Steel Forgings |
ASTM A 370 : 2024 | Standard Test Methods and Definitions for Mechanical Testing of Steel Products |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.