ASTM A 1017/A1017M : 2017
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Tungsten
Hardcopy , PDF
26-08-2024
English
01-11-2017
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
A 01
|
| DocumentType |
Standard
|
| Pages |
3
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This specification covers Chromium-Molybdenum-Tungsten alloy steel plates intended primarily for welded boilers and pressure vessels designed for elevated temperature service.
1.2Plates are available under this specification in grades having different alloy contents as follows:
| Grade | Nominal | Nominal | Nominal |
| 23 | 2.25 | 0.20 | 1.60 |
| 911 | 9.00 | 1.00 | 1.00 |
| 92 | 9.00 | 0.45 | 1.75 |
| 122 | 12.00 | 0.40 | 2.00 |
1.3The maximum thickness of plates is limited only by the capacity of the composition to meet the specified mechanical property requirements.
1.4The specification is expressed in both inch-pound units and in SI units. However, unless the order specifies the applicable “M” specification designation (SI units), the material shall be furnished to inch-pound units.
1.5The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM A 387/A387M : 2017 : REV A : R2023 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum |
| ASTM A 20/A20M : 2020 | Standard Specification for General Requirements for Steel Plates for Pressure Vessels |
| ASTM A 577/A577M : 2017 : R2023 | Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates |
| ASTM A 577/A577M : 2017 | Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates |
| ASTM A 578/A578M : 2017 : R2023 | Standard Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special Applications |
| ASTM A 20/A20M : 2004 | Standard Specification for General Requirements for Steel Plates for Pressure Vessels |
| ASTM A 577/A577M : 1990 : R1996 | Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates |
| ASTM A 578/A578M : 2017 | Standard Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special Applications |
| ASTM A 435/A435M : 2017 | Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates |
| ASTM A 578/A578M : 1996 | Standard Specification for Straight-Beam Ultrasonic Examination of Plain and Clad Steel Plates for Special Applications |
| ASTM A 435/A435M : 2017 : R2023 | Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates |
| ASTM A 20/A20M : 2000 : REV B | Standard Specification for General Requirements for Steel Plates for Pressure Vessels |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.