ASME PVHO 1 : 2016
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
SAFETY STANDARD FOR PRESSURE VESSELS FOR HUMAN OCCUPANCY
Hardcopy , PDF
24-12-2019
English
01-01-2016
Foreword
Committee Roster
Correspondence With the PVHO Committee
Summary of Changes
Section 1 General Requirements
Section 2 Viewports
Section 3 Quality Assurance for PVHO Manufacturers
Section 4 Piping Systems
Section 5 Medical Hyperbaric Systems
Section 6 Diving Systems
Section 7 Submersibles
Mandatory Appendices
I - Reference Codes, Standards, and Specifications
II - Definitions
Nonmandatory Appendices
A - Design of Supports and Lifting Attachments
B - Recommendations for the Design of Through-Pressure
Boundary Penetrations
C - Recommended Practices for Color Coding and Labeling
D - Guidelines for the Submission of a PVHO Case for the
Use of Nonstandard Designs, Materials, and Construction
E - Guidelines for Preparing a PVHO Performance-Based Case
for Flexible Chambers
F - Useful References
Pertains to all pressure vessels that enclose a human within their pressure boundary while under internal or external pressure exceeding a differential pressure of 2 psi (15 kPa).
| DocumentType |
Standard
|
| ISBN |
9780791870730
|
| Pages |
254
|
| PublisherName |
American Society of Mechanical Engineers
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ASME BPE : 2016 | BIOPROCESSING EQUIPMENT |
| NFPA 99 : 2018 | HEALTH CARE FACILITIES CODE |
| ASME PVHO 2 : 2016 | SAFETY STANDARD FOR PRESSURE VESSELS FOR HUMAN OCCUPANCY: IN-SERVICE GUIDELINES |
| DIN EN 12110:2003-05 | TUNNELLING MACHINES - AIR LOCKS - SAFETY REQUIREMENTS |
| EN 14931:2006 | Pressure vessels for human occupancy (PVHO) - Multi-place pressure chamber systems for hyperbaric therapy - Performance, safety requirements and testing |
| BS EN 12110:2014 | Tunnelling machines. Air locks. Safety requirements |
| NFPA 99C : 2005 | GAS AND VACUUM SYSTEMS |
| CSA B51 : 2014 | BOILER, PRESSURE VESSEL, AND PRESSURE PIPING CODE |
| DIN EN 14931:2006-08 | Pressure vessels for human occupancy (PVHO) - Multi-place pressure chamber systems for hyperbaric therapy - Performance, safety requirements and testing |
| CSA Z275.1 : 2016 | HYPERBARIC FACILITIES |
| I.S. EN 12110:2014 | TUNNELLING MACHINES - AIR LOCKS - SAFETY REQUIREMENTS |
| BS EN 14931:2006 | Pressure vessels for human occupancy (PVHO). Multi-place pressure chambers for hyperbaric therapy. Performance, safety requirements and testing |
| NFPA 99B : 2018 | HYPOBARIC FACILITIES |
| CSA Z275.2 : 2015 | OCCUPATIONAL SAFETY CODE FOR DIVING OPERATIONS |
| NASA STD 8719.10 : 2006 | UNDERWATER FACILITY AND NON-OPEN WATER OPERATIONS |
| DIN EN 12110:2014-10 | TUNNELLING MACHINES - AIR LOCKS - SAFETY REQUIREMENTS |
| EN 12110:2014 | Tunnelling machines - Air locks - Safety requirements |
| ISO 2440:1997 | Flexible and rigid cellular polymeric materials Accelerated ageing tests |
| ASTM B 154 : 2016 : REDLINE | Standard Test Method for Mercurous Nitrate Test for Copper Alloys |
| ASME STP-PT-047 : 2011 | PRINCIPLES OF SAFETY AND PERFORMANCE FOR MEDICAL HYPERBARIC CHAMBERS: GUIDELINES FOR REGULATORY SUBMISSION |
| ASTM D 732 : 2017 : REDLINE | Standard Test Method for Shear Strength of Plastics by Punch Tool |
| ASME B31.1 : 2016 | POWER PIPING |
| NFPA 701 : 2015 | FIRE TESTS FOR FLAME PROPAGATION OF TEXTILES AND FILMS |
| CFR 29(PTS1900-1910) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
| NASA STD 6001 : 2011 | FLAMMABILITY, OFFGASSING, AND COMPATIBILITY REQUIREMENTS AND TEST PROCEDURES |
| ASTM D 4364 : 2013 : REDLINE | Standard Practice for Performing Outdoor Accelerated Weathering Tests of Plastics Using Concentrated Sunlight |
| IEC 60601-1:2005+AMD1:2012 CSV | Medical electrical equipment - Part 1: General requirements for basic safety and essential performance |
| ASTM G 88 : 2013 : REDLINE | Standard Guide for Designing Systems for Oxygen Service |
| ISO 13485:2016 | Medical devices — Quality management systems — Requirements for regulatory purposes |
| NFPA 99B : 2018 | HYPOBARIC FACILITIES |
| FCI 70-2 : 2013 | CONTROL VALVE SEAT LEAKAGE |
| CFR 21(PTS800-1299) : 0 | FOOD AND DRUGS - FOOD AND DRUG ADMINISTRATION, CHAPTER 1 DEPARTMENT OF HEALTH AND HUMAN SERVICES - PARTS 800-1299 |
| NFPA 53 : 2016 | MATERIALS, EQUIPMENT, AND SYSTEMS USED IN OXYGEN-ENRICHED ATMOSPHERES |
| ASTM D 792 : 2013 : REDLINE | Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement |
| ASTM D 256 : 2015-10 | TEST METHODS FOR DETERMINING THE IZOD PENDULUM IMPACT RESISTANCE OF PLASTICS |
| ASME B1.20.1 : 2013(R2018) | PIPE THREADS, GENERAL PURPOSE (INCH) |
| ASTM D 696 : 2016 : REDLINE | Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between −30°C and 30°C with a Vitreous Silica Dilatometer |
| ASTM B 88 : 2016 : REDLINE | Standard Specification for Seamless Copper Water Tube |
| ISO 1419:1995 | Rubber- or plastics-coated fabrics Accelerated-ageing tests |
| ASME B36.10M : 2015 | WELDED AND SEAMLESS WROUGHT STEEL PIPE |
| NFPA 99 : 2018 | HEALTH CARE FACILITIES CODE |
| ASTM D 790 : 2017 : REDLINE | Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials |
| ISO 9001:2015 | Quality management systems — Requirements |
| ASTM D 648 : 2016 | Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position |
| ISO 877-2:2009 | Plastics — Methods of exposure to solar radiation — Part 2: Direct weathering and exposure behind window glass |
| ASME B31.9 : 2014 | BUILDING SERVICES PIPING |
| ASTM G 63 : 2015 : REDLINE | Standard Guide for Evaluating Nonmetallic Materials for Oxygen Service |
| ASME PVHO 2 : 2016 | SAFETY STANDARD FOR PRESSURE VESSELS FOR HUMAN OCCUPANCY: IN-SERVICE GUIDELINES |
| CFR 46(PTS166-199) : OCT 2017 | SHIPPING, COAST GUARD, DEPARTMENT OF TRANSPORTATION |
| ASTM D 695 : 2015 : REDLINE | Standard Test Method for Compressive Properties of Rigid Plastics |
| ASME PV CODE SET : 2017 | BOILER AND PRESSURE VESSEL CODE - COMPLETE SET |
| CGA G 4.4 : 2012 | OXYGEN PIPELINE AND PIPING SYSTEMS |
| ASTM D 570 : 1998 : R2018 | Standard Test Method for Water Absorption of Plastics |
| ASTM D 542 : 2014 : REDLINE | Standard Test Method for Index of Refraction of Transparent Organic Plastics |
| IMO IA808 : 1997 | CODE OF SAFETY FOR DIVING SYSTEMS |
| ASTM D 638 : 2014 : REDLINE | Standard Test Method for Tensile Properties of Plastics |
| IMCA D 024 : MAR 2013 | DESIGN FOR SATURATION (BELL) DIVING SYSTEMS |
Important note : All end users must be registered with an Account prior to user licenses being assigned.Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.