ASME FFS 1 : 2007
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
FITNESS-FOR-SERVICE
Available format(s)
Hardcopy , PDF
Superseded date
23-01-2019
Superseded by
Language(s)
English
Published date
01-01-2007
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
PART 1 - INTRODUCTION
PART 2 - FITNESS-FOR-SERVICE ENGINEERING ASSESSMENT
PROCEDURE
PART 3 - ASSESSMENT OF EXISTING EQUIPMENT FOR BRITTLE
FRACTURE
PART 4 - ASSESSMENT OF GENERAL METAL LOSS
PART 5 - ASSESSMENT OF LOCAL METAL LOSS
PART 6 - ASSESSMENT OF PITTING CORROSION
PART 7 - ASSESSMENT OF HYDROGEN BLISTERS AND HYDROGEN
DAMAGE ASSOCIATED WITH HIC AND SOHIC
PART 8 - ASSESSMENT OF WELD MISALIGNMENT AND SHELL
DISTORTIONS
PART 9 - ASSESSMENT OF CRACK-LIKE FLAWS
PART 10 - ASSESSMENT OF COMPONENTS OPERATING IN THE
CREEP RANGE
PART 11 - ASSESSMENT OF FIRE DAMAGE
PART 12 - ASSESSMENT OF DENTS, GOUGES, AND DENT-GOUGE
COMBINATIONS
PART 13 - ASSESSMENT OF LAMINATIONS
PART 14 - ASSESSMENT OF FATIGUE DAMAGE
Gives rules for the design, fabrication, inspection and testing pf new pressure vessels, piping systems, and storage tanks.
| DevelopmentNote |
Also numbered as API 579-1. (04/2008)
|
| DocumentType |
Standard
|
| ISBN |
791831027
|
| Pages |
1128
|
| PublisherName |
American Society of Mechanical Engineers
|
| Status |
Superseded
|
| SupersededBy |
| EEMUA 223 : 2010 | PRESSURE EQUIPMENT TESTING AFTER REPAIR, MODIFICATIONS OR RE-RATING: A GUIDE TO THE PRESSURE TEST WAIVER |
| API 510 CHINESE : 2014 | PRESSURE VESSEL INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION |
| API TR 942-B : 2017 | MATERIAL, FABRICATION, AND REPAIR CONSIDERATIONS FOR AUSTENITIC ALLOYS SUBJECT TO EMBRITTELEMENT AND CRACKING IN HIGH TEMPERATURE 565 DEGREES C TO 760 DEGREES C (1050 DEGREES F TO 1400 DEGREES F) REFINERY SERVICES |
| API 939-E : 2013 | IDENTIFICATION, REPAIR, AND MITIGATION OF CRACKING OF STEEL EQUIPMENT IN FUEL ETHANOL SERVICE |
| API 570 CHINESE : 2009 | PIPING INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION OF PIPING SYSTEMS |
| API 510 : 2014 | PRESSURE VESSEL INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION |
| API TR 17TR8 : 2018 | HIGH-PRESSURE HIGH-TEMPERATURE DESIGN GUIDELINES |
| ASME PTB 2 : 2009 | GUIDE TO LIFE CYCLE MANAGEMENT OF PRESSURE EQUIPMENT INTEGRITY |
| API TR 1PER15K-1 : 2013 | PROTOCOL FOR VERIFICATION AND VALIDATION OF HIGH-PRESSURE HIGH-TEMPERATURE EQUIPMENT |
| UNI/TS 11325-8 : 2013 | PRESSURE EQUIPMENT - PUTTING INTO SERVICE AND USE OF PRESSURE EQUIPMENT AND ASSEMBLIES - PART 8: PLANNING OF PRESSURE EQUIPMENT MAINTENANCE BY MEANS OF TECHNIQUES BASED ON RISK ASSESSMENT (RBI) |
| API 579-2 : 2009 | FITNESS-FOR-SERVICE EXAMPLE PROBLEM MANUAL |
| API 574 : 2016 | INSPECTION PRACTICES FOR PIPING SYSTEM COMPONENTS |
| API 580 : 2016 | RISK-BASED INSPECTION |
| API 1626 : 2010 | STORING AND HANDLING ETHANOL AND GASOLINE-ETHANOL BLENDS AT DISTRIBUTION TERMINALS AND FILLING STATIONS |
| API 572 CHINESE : 2009 | INSPECTION PRACTICES FOR PRESSURE VESSELS |
| API 572 : 2016 | INSPECTION PRACTICES FOR PRESSURE VESSELS |
| API 1160 : 2013 | MANAGING SYSTEM INTEGRITY FOR HAZARDOUS LIQUID PIPELINES |
| MIL-PRF-32080 Revision G:2014 | TRUCK, AIRCRAFT FUELING-DEFUELING, 6,000 GALLON, A/S32R-11 |
| API 578 : 2018 | GUIDELINES FOR A MATERIAL VERIFICATION PROGRAM (MVP) FOR NEW AND EXISTING ASSETS |
| NFPA 55 : 2016 | COMPRESSED GASES AND CRYOGENIC FLUIDS CODE |
| NACE SP 01 10 : 2010 | WET GAS INTERNAL CORROSION DIRECT ASSESSMENT METHODOLOGY FOR PIPELINES |
| PD 8010-4:2012 | Pipeline systems Steel pipelines on land and subsea pipelines. Code of practice for integrity management |
| ASME PCC 2 : 2015 | REPAIR OF PRESSURE EQUIPMENT AND PIPING |
| API 653 CHINESE : 2014 | TANK INSPECTION, REPAIR, ALTERATION, AND RECONSTRUCTION |
| BS ISO 27306:2016 | Metallic materials. Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components |
| API RP 1176 : 2016 | RECOMMENDED PRACTICE FOR ASSESSMENT AND MANAGEMENT OF CRACKING IN PIPELINES |
| API 570 : 2016 | PIPING INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION OF PIPING SYSTEMS |
| EEMUA 211 : 2016 | GUIDANCE ON THE SPECIFICATION OF PRESSURE VESSELS |
| API TR 942-A : 2014 | MATERIALS, FABRICATION, AND REPAIR CONSIDERATIONS FOR HYDROGEN REFORMER FURNACE OUTLET PIGTAILS AND MANIFOLDS |
| API TR 934-G : 2016 | DESIGN, FABRICATION, OPERATIONAL EFFECTS, INSPECTION, ASSESSMENT, AND REPAIR OF COKE DRUMS AND PERIPHERAL COMPONENTS IN DELAYED COKING UNITS |
| ASME PV CODE 8 DIV 2 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 2- ALTERNATIVE RULES |
| ISO/TS 35105:2018 | Petroleum and natural gas industries Arctic operations Material requirements for arctic operations |
| API 653 : 2014 | TANK INSPECTION, REPAIR, ALTERATION, AND RECONSTRUCTION |
| API 571 : 2011 | DAMAGE MECHANISMS AFFECTING FIXED EQUIPMENT IN THE REFINING INDUSTRY |
| API 574 CHINESE : 2009 | INSPECTION PRACTICES FOR PIPING SYSTEM COMPONENTS |
| CSA N285.7 : 2015 | Periodic inspection of CANDU nuclear power plant balance of plant systems and components<br> |
| API 939-C : 2009 | GUIDELINES FOR AVOIDING SULFIDATION (SULFIDIC) CORROSION FAILURES IN OIL REFINERIES |
| API 530 : 2015 | CALCULATION OF HEATER-TUBE THICKNESS IN PETROLEUM REFINERIES |
| ASME PV CODE 8 DIV 3 : 2017 | BPVC Section VIII-BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS - ALTERNATIVE RULES FOR CONSTRUCTION OF HIGH PRESSURE VESSELS |
| API 581 REDLINE : 2008 | RISK-BASED INSPECTION TECHNOLOGY |
| API 653 REDLINE : 2009 | TANK INSPECTION, REPAIR, ALTERATION, AND RECONSTRUCTION |
| I.S. EN ISO 24817:2017 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COMPOSITE REPAIRS FOR PIPEWORK - QUALIFICATION AND DESIGN, INSTALLATION, TESTING AND INSPECTION (ISO 24817:2017, CORRECTED VERSION 2018-01-01) |
| API 1626 REDLINE : 2010 | STORING AND HANDLING ETHANOL AND GASOLINE-ETHANOL BLENDS AT DISTRIBUTION TERMINALS AND FILLING STATIONS |
| ASME STP-PT-025 : 0 | EXTENDED FATIGUE EXEMPTION RULES FOR LOW CR ALLOYS INTO THE TIME-DEPENDENT RANGE FOR SECTION 8 DIVISION 2 CONSTRUCTION |
| ASME PVHO 2 : 2016 | SAFETY STANDARD FOR PRESSURE VESSELS FOR HUMAN OCCUPANCY: IN-SERVICE GUIDELINES |
| ASME STP-PT-082 : 2017 | STRESS INTENSITY K FACTORS FOR EXTERNAL SURFACE CRACKS IN THICK-WALLED CYLINDER VESSELS |
| ASME STP-PT-071 : 2014 | STRESS INTENSITY FACTOR SOLUTIONS FOR INTERNAL CRACKS IN THICK-WALLED CYLINDER VESSELS |
| API 570 REDLINE : 2009 | PIPING INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION OF PIPING SYSTEMS |
| NASA STD 5019 : 2016 | FRACTURE CONTROL REQUIREMENTS FOR SPACEFLIGHT HARDWARE |
| ASME PCC 2S : 2015 | SUPPLEMENT TO ASME PCC-2 - 2015 - REPAIR OF PRESSURE EQUIPMENT AND PIPING |
| API 571 REDLINE : 2011 | DAMAGE MECHANISMS AFFECTING FIXED EQUIPMENT IN THE REFINING INDUSTRY |
| ASME STP-PT-024 : 2008 | DEVELOPMENT OF BASIC TIME-DEPENDENT ALLOWABLE STRESSES FOR CREEP REGIME IN SECTION 8, DIVISION 1 |
| ASME FFS 2 : 2009 | FITNESS-FOR-SERVICE EXAMPLE PROBLEM MANUAL |
| ASME PTB 3 : 2013 | ASME SECTION 8 - DIVISION 2 EXAMPLE PROBLEM MANUAL |
| ASME B31.12 : 2014 | HYDROGEN PIPING AND PIPELINES |
| API 574 REDLINE : 2009 | INSPECTION PRACTICES FOR PIPING SYSTEM COMPONENTS |
| ASME STP-NU-040 : 2012 | UPDATE AND IMPROVE SUBSECTION NH - SIMPLIFIED ELASTIC AND INELASTIC DESIGN ANALYSIS METHODS |
| ASME STP-PT-070 : 2014 | Design Guidelines for the Effects of Creep, Fatigue & Creep-Fatigue Interaction with Design-By-Analysis and Nondestructive Inspection Acceptance Criteria (STP-PT-070 - 2014) |
| API 572 REDLINE : 2009 | INSPECTION PRACTICES FOR PRESSURE VESSELS |
| API 580 REDLINE : 2009 | RISK-BASED INSPECTION |
| NACE 8X194 : 2006 | MATERIALS AND FABRICATION PRACTICES FOR NEW PRESSURE VESSELS USED IN WET H[2]S REFINERY SERVICE |
| ASME PV CODE 8 DIV 2 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 2- ALTERNATIVE RULES |
| ASTM A 691 : 1998 | Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures |
| API 575 : 2014 | INSPECTION PRACTICES FOR ATMOSPHERIC AND LOW-PRESSURE STORAGE TANKS |
| ASME B31.1 : 2016 | POWER PIPING |
| ASME PV CODE 8 DIV 1 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1 |
| API 576 : 2017 | INSPECTION OF PRESSURE-RELIEVING DEVICES |
| ASME B31.8 : 2016 | Gas Transmission and Distribution Piping Systems |
| ASME PCC 2 : 2015 | REPAIR OF PRESSURE EQUIPMENT AND PIPING |
| API 653 : 2014 | TANK INSPECTION, REPAIR, ALTERATION, AND RECONSTRUCTION |
| API 620 : 2013 | DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS |
| API 573 : 2013 | INSPECTION OF FIRED BOILERS AND HEATERS |
| ASME B31.3:2016 | PROCESS PIPING |
| ASME B31.4 : 2016 | PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES |
| API 581 : 2016 | RISK-BASED INSPECTION METHODOLOGY |
| API 510 : 2014 | PRESSURE VESSEL INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION |
| ASME B31.12 : 2014 | HYDROGEN PIPING AND PIPELINES |
| API 578 : 2010 | GUIDELINES FOR A MATERIAL VERIFICATION PROGRAM (MVP) FOR NEW AND EXISTING ASSETS |
| ISO/TR 7468:1981 | Summary of average stress rupture properties of wrought steels for boilers and pressure vessels |
| API 580 : 2016 | RISK-BASED INSPECTION |
| ASME PTB 3 : 2013 | ASME SECTION 8 - DIVISION 2 EXAMPLE PROBLEM MANUAL |
| API 571 : 2011 | DAMAGE MECHANISMS AFFECTING FIXED EQUIPMENT IN THE REFINING INDUSTRY |
| ASME PV CODE 2D METRIC : 2017 | BOILER AND PRESSURE VESSEL CODE - MATERIALS - PROPERTIES (METRIC) |
| ASCE 7 10 : 2010 | MINIMUM DESIGN LOADS FOR BUILDINGS AND OTHER STRUCTURES |
| API 941 : 2016 | STEELS FOR HYDROGEN SERVICE AT ELEVATED TEMPERATURES AND PRESSURES IN PETROLEUM REFINERIES AND PETROCHEMICAL PLANTS |
| API 530 : 2015 | CALCULATION OF HEATER-TUBE THICKNESS IN PETROLEUM REFINERIES |
| ASME PTB 1 : 2014 | ASME SECTION 8 - DIVISION 2 CRITERIA AND COMMENTARY |
| NACE RP 02 96 : 2004 | GUIDELINES FOR DETECTION, REPAIR, AND MITIGATION OF CRACKING OF EXISTING PETROLEUM REFINERY PRESSURE VESSELS IN WET H[2]S ENVIRONMENTS |
| ASTM G 46 : 1994 : R2018 | Standard Guide for Examination and Evaluation of Pitting Corrosion |
| ASME PV CODE 1 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF POWER BOILERS |
| ASME CODE CASE B & PV : 2017 | CODE CASES: BOILERS AND PRESSURE VESSELS |
| DIN 2413-2:1993-10 | STEEL PIPES - DESIGN OF ELBOWS AND BENDS FOR STEEL PRESSURE PIPES |
| PD 6539:1994 | Guide to methods for the assessment of the influence of crack growth on the significance of defects in components operating at high temperatures |
| ASME PV CODE 2B : 2017 | BOILER AND PRESSURE VESSEL CODE - MATERIALS - NONFERROUS MATERIAL SPECIFICATIONS |
| BS 7448-2:1997 | Fracture mechanics toughness tests Method for determination of KIc, critical CTOD and critical J values of welds in metallic materials |
| ASME PV CODE 2A : 2017 | BOILER AND PRESSURE VESSEL CODE - MATERIALS - FERROUS MATERIAL SPECIFICATIONS (BEGINNING TO SA-450) AND (SA-451 TO END) |
| ASME B16.9 : 2012 | FACTORY-MADE WROUGHT BUTTWELDING FITTINGS |
| API 570 : 2016 | PIPING INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION OF PIPING SYSTEMS |
| ASME PV CODE 3 APP DIV 1 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR THE CONSTRUCTION OF NUCLEAR FACILITY COMPONENTS - APPENDICES |
| ASTM E 8 : 2004 | Standard Test Methods for Tension Testing of Metallic Materials |
| ASME PV CODE 2D CUSTOMARY : 2017 | BOILER AND PRESSURE VESSEL CODE - MATERIALS - PROPERTIES (CUSTOMARY) |
| API 572 : 2016 | INSPECTION PRACTICES FOR PRESSURE VESSELS |
| ISO 3057:1998 | Non-destructive testing — Metallographic replica techniques of surface examination |
| ASTM A 671 : 2009 | Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures |
| ASME PV CODE 11 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR INSERVICE INSPECTION OF NUCLEAR POWER PLANT COMPONENTS |
| API 577 : 2013 | WELDING PROCESSES, INSPECTION, AND METALLURGY |
| DIN 2413-1:1993-10 | STEEL PIPES - DESIGN OF STEEL PRESSURE PIPES |
| NACE SP 02 96 : 2010 | DETECTION, REPAIR, AND MITIGATION OF CRACKING IN REFINERY EQUIPMENT IN WET H[2]S ENVIRONMENTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.