ASME B36.10M : 2015
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
WELDED AND SEAMLESS WROUGHT STEEL PIPE
Available format(s)
Hardcopy , PDF
Superseded date
08-12-2018
Superseded by
Language(s)
English
Published date
31-08-2015
Publisher
Foreword
Committee Roster
Correspondence With the B32 Committee
1 Scope
2 Size
3 Materials
4 Wall Thickness
5 Weights
6 Permissible Variations
7 Pipe Threads
8 Wall Thickness Designations
9 Wall Thickness Selection
Describes the standardization of dimensions of welded and seamless wrought steel pipe for high or low temperatures and pressures.
| DevelopmentNote |
Supersedes ASME B36.10 (07/2004)
|
| DocumentType |
Standard
|
| ISBN |
9780791870273
|
| Pages |
30
|
| PublisherName |
American Society of Mechanical Engineers
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| BS EN ISO 10439:2002 | Petroleum, chemical and gas service industries. Centrifugal compressors |
| MSS SP 65 : 2012 | HIGH PRESSURE CHEMICAL INDUSTRY FLANGES AND THREADED STUBS FOR USE WITH LENS GASKETS |
| NFPA 1123 : 2018 | Code for Fireworks Display<br> |
| BS 3603:1991 | Specification for carbon and alloy steel pipes and tubes with specified low temperature properties for pressure purposes |
| ASTM A 139/A139M : 2016 : REDLINE | Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over) |
| ANSI/CSA NGV 5.1-2016 (R2020) | Residential fueling appliances |
| API 546 : 2008 | BRUSHLESS SYNCHRONOUS MACHINES - 500 KVA AND LARGER |
| NFPA 501C : 1996 | RECREATIONAL VEHICLES |
| CSA/ANSI Z83.25 : 2017 | DIRECT GAS-FIRED PROCESS AIR HEATERS |
| API 64 : 2017-08 | DIVERTER EQUIPMENT SYSTEMS |
| DIN 30690-1:2016-04 | CONSTRUCTION ELEMENTS IN THE GAS SUPPLY SYSTEM - PART 1: REQUIREMENTS FOR CONSTRUCTION ELEMENTS IN GAS SUPPLY SYSTEMS |
| CSA B242 : 2005 | GROOVE- AND SHOULDER-TYPE MECHANICAL PIPE COUPLINGS |
| API 14E : 1991 : R2013 | RECOMMENDED PRACTICE FOR DESIGN AND INSTALLATION OF OFFSHORE PRODUCTION PLATFORM PIPING SYSTEMS |
| CSA/ANSI/IAS U.S. LC 2 : 1996 | DIRECT GAS-FIRED CIRCULATING HEATERS FOR AGRICULTURAL ANIMAL CONFINEMENT BUILDINGS |
| CSA/ANSI Z21.1 : 2016 | HOUSEHOLD COOKING GAS APPLIANCES |
| CSA/ANSI Z21.76-2016 | Gas-fired unvented catalytic room heaters for use with propane gas |
| API 620 REDLINE : 2008 | DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS |
| CSA 3.8 : 2014 | GAS-FIRED EQUIPMENT FOR DRYING FARM CROPS |
| ISO 7005-1:2011 | Pipe flanges — Part 1: Steel flanges for industrial and general service piping systems |
| ASTM A 949/A949M : 2001 : R2009 | Standard Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe |
| ASTM F 1387 : 1999 : R2012 | Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings |
| ASME PVHO 1 : 2016 | SAFETY STANDARD FOR PRESSURE VESSELS FOR HUMAN OCCUPANCY |
| ISO 10439:2002 | Petroleum, chemical and gas service industries Centrifugal compressors |
| ASME PV CODE 4 : 2017 | BPVC Section IV-BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF HEATING BOILERS |
| ASME B16.21 : 2016 | NONMETALLIC FLAT GASKETS FOR PIPE FLANGES |
| UNE-EN 16767:2017 | Industrial valves - Steel and cast iron check valves |
| NACE SP 02 07 : 2007 | PERFORMING CLOSE-INTERVAL POTENTIAL SURVEYS AND DC SURFACE POTENTIAL GRADIENT SURVEYS ON BURIED OR SUBMERGED METALLIC PIPELINES |
| CSA/ANSI Z21.40.1 : 1996 | GAS-FIRED, HEAT ACTIVATED AIR CONDITIONING AND HEAT PUMP APPLIANCES |
| MSS SP 118 : 2007 | COMPACT STEEL GLOBE & CHECK VALVES - FLANGED, FLANGELESS, THREADED & WELDING ENDS (CHEMICAL & PETROLEUM REFINERY SERVICE) |
| NFPA 31 : 2016 | INSTALLATION OF OIL-BURNING EQUIPMENT |
| ASME B16.9 : 2012 | FACTORY-MADE WROUGHT BUTTWELDING FITTINGS |
| I.S. EN ISO 10439:2002 | PETROLEUM, CHEMICAL AND GAS SERVICE INDUSTRIES - CENTRIFUGAL COMPRESSORS |
| I.S. EN ISO 13706:2011 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AIR-COOLED HEAT EXCHANGERS (ISO 13706:2011) |
| CSA 1.8 : 2016 | GAS FOOD SERVICE EQUIPMENT |
| PIP PNE00002 : 2019 | PIPING MATERIAL SPECIFICATION SELECTION, DEVELOPMENT, AND APPLICATION GUIDELINES |
| API 1615 : 2011 | INSTALLATION OF UNDERGROUND PETROLEUM STORAGE SYSTEMS |
| API 620 : 2013 | DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS |
| EN ISO 17292:2015 | Metal ball valves for petroleum, petrochemical and allied industries (ISO 17292:2015) |
| CSA/ANSI Z21.13 : 2017 | GAS-FIRED LOW PRESSURE STEAM AND HOT WATER BOILERS |
| CSA/ANSI Z21.58-2018/CSA 1.6-2018 | Outdoor cooking gas appliances |
| ASTM A 1037/A1037M : 2005 : R2012 | Standard Specification for Steel Line Pipe, Black, Furnace-Butt-Welded (Withdrawn 2017) |
| CSA/ANSI Z21.63 : 2014 | PORTABLE TYPE GAS CAMP HEATERS |
| API 1615 REDLINE : 2011 | INSTALLATION OF UNDERGROUND PETROLEUM STORAGE SYSTEMS |
| CSA/ANSI Z21.11.3-2016 | Gas-fired room heaters, volume III, propane-fired portable emergency use heater systems |
| ASME B18.31.5 : 2011 | BENT BOLTS (INCH SERIES) |
| CSA/ANSI Z21.103-2017 | Unvented portable type gas camp heaters for indoor and outdoor use |
| ASTM F 2014 : 2000 : R2019 | Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications |
| ANSI Z21.89-2017/CSA 1.18-2017 | Outdoor cooking specialty gas appliances |
| ASME PTB 2 : 2009 | GUIDE TO LIFE CYCLE MANAGEMENT OF PRESSURE EQUIPMENT INTEGRITY |
| PIP PNC00005 : 2016 | DESIGN OF ASME B31.3 - METALLIC PIPING SYSTEMS |
| ASTM F 994 : 1986 : R2006 | Standard Specification for Design and Installation of Overboard Discharge Hull Penetration Connections |
| MIL U 18182 : E | UNION, PIPE, FORGED STEEL, THREADED, WATER OIL GAS (2,000, 3,000 AND 6,000 LB/IN2) |
| ASTM F 1387 : 1999 : R2005 | Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings |
| CSA/ANSI Z83.19-2017/CSA 2.35-2017 | Gas-fired high-intensity infrared heaters |
| CSA/ANSI Z21.10.1 : 2017 | GAS WATER HEATERS, VOLUME 1, STORAGE WATER HEATERS WITH INPUT RATINGS OF 75,000 BTU PER HOUR OR LESS |
| CSA/ANSI Z21.10.1:19/CSA 4.1:19 | Gas water heaters, volume I, storage water heaters with input ratings of 75,000 Btu per hour or less |
| CSA/ANSI Z21.88 : 2017 | VENTED GAS FIREPLACE HEATERS |
| CSA/ANSI Z21.86-2016/CSA 2.32-2016 | Vented gas-fired space heating appliances |
| CSA/ANSI Z21.10.3 : 2015 | GAS-FIRED WATER HEATERS, VOLUME 3, STORAGE WATER HEATERS WITH INPUT RATINGS ABOVE 75,000 BTU PER HOUR, CIRCULATING AND INSTANTANEOUS |
| API 608 CHINESE : 2012 | METAL BALL VALVES - FLANGED, THREADED, AND WELDING ENDS |
| ASME B16.20 : 2017 | METALLIC GASKETS FOR PIPE FLANGES |
| CSA 1.1 : 2016 | HOUSEHOLD COOKING GAS APPLIANCES |
| ASTM A 1024/A1024M : 2002 : R2012 | Standard Specification for Steel Line Pipe, Black, Plain-End, Seamless |
| ASTM A 135/A135M : 2009 : R2014 | Standard Specification for Electric-Resistance-Welded Steel Pipe |
| API 5L RUSSIAN : 2012 | SPECIFICATION FOR LINE PIPE |
| ASME PV CODE 1 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF POWER BOILERS |
| BS 1600-2:1970 | Specification for dimensions of steel pipe for the petroleum industry Metric units |
| ASTM A 949/A949M : 2001 : R2005 | Standard Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe |
| ASME B31.3:2016 | PROCESS PIPING |
| UNE 27310:2014 | Civil shipbuilding and ship repairing. Standardised components. Steel sleeves for piping connection |
| CSA 11.2 : 2016 | PORTABLE TYPE GAS CAMP STOVES |
| BS 5160:1989 | Specification for steel globe valves, globe stop and check valves and lift type check valves |
| API 603 RUSSIAN : 2013 | CORROSION-RESISTANT, BOLTED BONNET GATE VALVES - FLANGED AND BUTT-WELDING ENDS |
| BS EN ISO 13706:2011 | Petroleum, petrochemical and natural gas industries. Aircooled heat exchangers |
| ASTM A 949/A949M : 2001 | Standard Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe |
| ANSI Z223.1 : 2018 | NATIONAL FUEL GAS CODE |
| BS 3604-1:1990 | Steel pipes and tubes for pressure purposes: ferritic alloy steel with specified elevated temperature properties Specification for seamless and electric resistance welded tubes |
| ASTM F 994 : 1986 : R1996 : EDT 1 | Standard Specification for Design and Installation of Overboard Discharge Hull Penetration Connections |
| API 606 : 3ED 89 | COMPACT CARBON STEEL GATE VALVES - EXTENDED BODY |
| MSS SP 79 : 2011 | SOCKET WELDING REDUCER INSERTS |
| API 5L REDLINE : 2007 | SPECIFICATION FOR LINE PIPE |
| PIP PLC00005 : 2016 | DESIGN OF ASME B31.8 METALLIC PIPELINE SYSTEMS WITHIN FACILITIES |
| I.S. EN ISO 3183:2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012) |
| CSA/ANSI Z21.89 : 2017 | OUTDOOR COOKING SPECIALTY GAS APPLIANCES |
| I.S. EN ISO 17292:2015 | METAL BALL VALVES FOR PETROLEUM, PETROCHEMICAL AND ALLIED INDUSTRIES (ISO 17292:2015) |
| API 599 : 2013 | METAL PLUG VALVES - FLANGED, THREADED, AND WELDING ENDS |
| CSA 2.37 : 2014 | GAS-FIRED OUTDOOR INFRARED PATIO HEATERS |
| ASHRAE HDBK REFRIGERATION : 2014 | ASHRAE HANDBOOK - REFRIGERATION |
| ASME B16.5 : 2017 | PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD |
| I.S. EN ISO 27509:2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - COMPACT FLANGED CONNECTIONS WITH 9 SEAL RING (ISO 27509:2012) |
| ANSI Z21.5.1-2017/CSA 7.1-2017 | Gas clothes dryers, volume I, type 1 clothes dryers |
| API 600 REDLINE : 2009 | STEEL GATE VALVES - FLANGED AND BUTT-WELDING ENDS, BOLTED BONNETS |
| BS ISO 7005-1:2011 | Pipe flanges Steel flanges for industrial and general service piping systems |
| PIP PNE00002 : 2013 | PIPING MATERIAL SPECIFICATION SELECTION, DEVELOPMENT, AND APPLICATION GUIDELINES |
| API 608 REDLINE : 2008 | METAL BALL VALVES - FLANGED, THREADED AND WELDING ENDS |
| CSA/ANSI Z21.84-2017 | Manually lighted, natural gas, decorative gas appliances for installation in solid-fuel burning appliances |
| CSA/ANSI Z83.4-2017/CSA 3.7-2017 | Non-recirculating direct gas-fired heating and forced ventilation appliances for commercial and industrial application |
| CSA/ANSI Z21.60-2017/CSA 2.26-2017 | Decorative gas appliances for installation in solid-fuel burning fireplaces |
| PIP PNSM0110 : 2017 | PURCHASING REQUIREMENTS FOR VALVES |
| ASME B32.3M : 84(R1994) | PREFERRED METRIC SIZES FOR FLAT METAL PRODUCTS |
| ASTM F 2014 : 2000 | Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications |
| ASTM F 1387 : 1999 | Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings |
| EN ISO 10439:2002 | Petroleum, chemical and gas service industries - Centrifugal compressors (ISO 10439:2002) |
| API 14E CHINESE : 2007 | RECOMMENDED PRACTICE FOR DESIGN AND INSTALLATION OF OFFSHORE PRODUCTION PLATFORM PIPING SYSTEMS |
| BS EN ISO 17292:2015 | Metal ball valves for petroleum, petrochemical and allied industries |
| CSA HPIT 1 : 2015 | COMPRESSED HYDROGEN POWERED INDUSTRIAL TRUCK ON-BOARD FUEL STORAGE AND HANDLING COMPONENTS |
| ANSI Z21.5.1-2017/CSA 7.1-2017 | Gas clothes dryers, volume I, type 1 clothes dryers |
| ASME B31.8 : 2016 | Gas Transmission and Distribution Piping Systems |
| API 609 : 2016 | BUTTERFLY VALVES: DOUBLE-FLANGED, LUG- AND WAFER-TYPE |
| ASME B31.5 : 2016 | REFRIGERATION PIPING AND HEAT TRANSFER COMPONENTS |
| CSA HPIT 1:15 (R2020) | Compressed hydrogen powered industrial truck on-board fuel storage and handling components |
| API 551 : 2016 | PROCESS MEASUREMENT |
| ASTM A 523 : 1996 : R2005 | Standard Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits |
| NFPA 58 : 2017 | LIQUEFIED PETROLEUM GAS CODE |
| CSA 11.3 : 2014 | PORTABLE TYPE GAS CAMP HEATERS |
| API 601 : 1988 | METALLIC GASKETS FOR RAISED-FACE PIPE FLANGES AND FLANGED CONNECTIONS (DOUBLE-JACKETED CORRUGATED AND SPIRAL WOUND) |
| CSA/ANSI Z83.18 : 2017 | RECIRCULATING DIRECT GAS-FIRED HEATING AND FORCED VENTILATION APPLIANCES FOR COMMERCIAL AND INDUSTRIAL APPLICATIONS |
| ASME B31.4 : 2016 | PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES |
| CSA 2.6 : 2016 | GAS UNIT HEATERS, GAS PACKAGED HEATERS, GAS UTILITY HEATERS, AND GAS-FIRED DUCT FURNACES |
| CSA/ANSI NGV 5.2-2017 | Vehicle fueling appliances (VFA) |
| BS 3604-2:1991 | Steel pipes and tubes for pressure purposes: ferritic alloy steel with specified elevated temperature properties. Specification for longitudinally arc welded tubes |
| MSS SP 67 : 2017 | BUTTERFLY VALVES |
| MIL-DTL-18182 Revision F:2002 | UNION, PIPE, FORGED STEEL, THREADED, WATER-OIL-GAS (2,000, 3,000, AND 6,000 LB/IN[2]) |
| BS EN 16767:2016 | Industrial valves. Steel and cast iron check valves |
| BS EN ISO 10442:2002 | Petroleum, chemical and gas service industries. Packaged, integrally geared centrifugal air compressors |
| BS EN ISO 27509:2012 | Petroleum and natural gas industries. Compact flanged connections with IX seal ring |
| MSS SP 97 : 2012 | INTEGRALLY REINFORCED FORGED BRANCH OUTLET FITTINGS - SOCKET WELDING, THREADED, AND BUTTWELDING ENDS |
| NASA STD 8719.24 : 2011 | NASA EXPENDABLE LAUNCH VEHICLE PAYLOAD SAFETY REQUIREMENTS |
| CSA/ANSI Z21.40.1 : 1996 : INC : ADD A : 1997 : R2012 | GAS-FIRED, HEAT ACTIVATED AIR CONDITIONING AND HEAT PUMP APPLIANCES |
| CSA B149.1 : 2010 | NATURAL GAS AND PROPANE INSTALLATION CODE |
| BIS IS/ISO 3183 : 2007 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
| NASA KSC STD Z 0005 : 1988 | DESIGN OF PNEUMATIC GROUND-SUPPORT EQUIPMENT, STANDARD FOR |
| ASTM F 2014 : 2000 : R2006 | Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications |
| API STD 541 : 2014 | FORM-WOUND SQUIRREL CAGE INDUCTION MOTORS - 375 KW (500 HORSEPOWER) AND LARGER |
| ASME PV CODE 8 DIV 1 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1 |
| ASTM A 949/A949M : 2001 : R2019 | Standard Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe (Withdrawn 2024) |
| EN ISO 10442:2002 | Petroleum, chemical and gas service industries - Packaged, integrally geared centrifugal air compressors (ISO 10442:2002) |
| ASTM F 2014 : 2000 : R2013 | Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications |
| ASTM A 135/A135M : 2009 | Standard Specification for Electric-Resistance-Welded Steel Pipe |
| PIP PNSM0115 : 2016 | PURCHASING REQUIREMENTS FOR PIPE |
| NBR 14334 : 2016 | ALUMINUM ALLOY 6101 - STRUCTURAL PIPES FOR ELECTRICAL PURPOSES - REQUIREMENTS |
| CSA 2.33 : 2017 | VENTED GAS FIREPLACE HEATERS |
| API 620 CHINESE : 2013 | DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS |
| ASTM A 1024/A1024M : 2002 | Standard Specification for Steel Line Pipe, Black, Plain-End, Seamless |
| CSA/ANSI Z83.11 : 2016 | GAS FOOD SERVICE EQUIPMENT |
| ASTM A 1024/A1024M : 2002 : R2007 | Standard Specification for Steel Line Pipe, Black, Plain-End, Seamless |
| ASTM F 994 : 1986 : R2001 | Standard Specification for Design and Installation of Overboard Discharge Hull Penetration Connections |
| ANSI Z83.20-2016/CSA 2.34-2016 | Gas-fired tubular and low-intensity infrared heaters |
| NACE 5A171 : 2007 | MATERIALS FOR STORING AND HANDLING COMMERCIAL GRADES OF AQUEOUS HYDROFLUORIC ACID AND ANHYDROUS HYDROGEN FLUORIDE |
| ASME B31.1 : 2016 | POWER PIPING |
| API 574 CHINESE : 2009 | INSPECTION PRACTICES FOR PIPING SYSTEM COMPONENTS |
| BS 5353:1989 | Specification for steel plug valves |
| ASTM A 523 : 1996 | Standard Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits |
| ASTM A 949/A949M : 2001 : R2014 | Standard Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe |
| API 661 : 2015 | PETROLEUM, PETROCHEMICAL, AND NATURAL GAS INDUSTRIES - AIR-COOLED HEAT EXCHANGERS |
| ASTM D 3309 : 1996 : REV A : R2002 | Standard Specification for Polybutylene (PB) Plastic Hot- and Cold-Water Distribution Systems (Withdrawn 2010) |
| BS 3602-2:1991 | Specification for steel pipes and tubes for pressure purposes: carbon and carbon manganese steel with specified elevated temperature properties Specification for longitudinally arc welded tubes |
| CSA NGV 5.1 : 2016 | RESIDENTIAL FUELING APPLIANCES |
| ASME B31.12 : 2014 | HYDROGEN PIPING AND PIPELINES |
| NFPA 12B : 1990 | HALON 1211 FIRE EXTINGUISHING SYSTEMS |
| AWWA C501 : 1992 | CAST-IRON SLUICE GATES |
| NASA KSC STD Z 0017 : 2014 | ENGINEERING ANALYSIS, THERMAL/FLUID, STANDARD FOR |
| AGA Z22302 : 2002 ADDENDA A 03 | NATIONAL FUEL GAS CODE |
| I.S. EN 16767:2016 | INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES |
| CSA/ANSI Z83.8 : 2016 | GAS UNIT HEATERS, GAS PACKAGED HEATERS, GAS UTILITY HEATERS, AND GAS-FIRED DUCT FURNACES |
| ASME B31.3 SPANISH : 2010 | PROCESS PIPING |
| ISO 13706:2011 | Petroleum, petrochemical and natural gas industries — Air-cooled heat exchangers |
| API STD 600 : 2015 | STEEL GATE VALVES - FLANGED AND BUTT-WELDING ENDS, BOLTED BONNETS |
| ASTM F 994 : 1986 : R2018 | Standard Specification for Design and Installation of Overboard Discharge Hull Penetration Connections |
| AWWA C605 : 2013 | UNDERGROUND INSTALLATION OF POLYVINYL CHLORIDE (PVC) AND MOLECULARLY ORIENTED POLYVINYL CHLORIDE (PVCO) PRESSURE PIPE AND FITTINGS |
| BS EN ISO 3183 : 2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
| ASTM A 211 : 75(R1985) | SPECIFICATION FOR SPIRAL-WELDED STEEL OR IRON PIPE |
| MSS SP 83 : 2014 | CLASS 3000 AND 6000 PIPE UNIONS, SOCKET WELDING AND THREADED (CARBON STEEL, ALLOY STEEL, STAINLESS STEELS, AND NICKEL ALLOYS) |
| CSA/ANSI Z21.74-2017 | Portable refrigerators |
| ASME B18.31.5 : 2011 : R2016 | BENT BOLTS (INCH SERIES) |
| CSA/ANSI/IAS U.S. LC 2 : 1996 : INC : ADD A : 1998 : R2015 | DIRECT GAS-FIRED CIRCULATING HEATERS FOR AGRICULTURAL ANIMAL CONFINEMENT BUILDINGS |
| CSA/ANSI Z21.19 : 2014 | REFRIGERATORS USING GAS FUEL |
| API 600 RUSSIAN : 2009 | STEEL GATE VALVES - FLANGED AND BUTT-WELDING ENDS, BOLTED BONNETS |
| CSA CGA B105 : 1993 | CODE FOR DIGESTER GAS AND LANDFILL GAS INSTALLATIONS |
| API 574 REDLINE : 2009 | INSPECTION PRACTICES FOR PIPING SYSTEM COMPONENTS |
| MSS SP 107 : 1991 | TRANSITION UNION FITTINGS FOR JOINING METAL AND PLASTIC PRODUCTS |
| BS 1600:1991 | Specification for dimensions of steel pipe for the petroleum industry |
| ISO 10442:2002 | Petroleum, chemical and gas service industries Packaged, integrally geared centrifugal air compressors |
| CSA/ANSI Z21.96 : 2014 | PORTABLE WATER HEATERS FOR OUTDOOR USE |
| NFPA 15 : 2017 | WATER SPRAY FIXED SYSTEMS FOR FIRE PROTECTION |
| ASTM F 994 : 1986 : R2011 | Standard Specification for Design and Installation of Overboard Discharge Hull Penetration Connections |
| CSA 2.22 : 2016 | VENTED DECORATIVE GAS APPLIANCES |
| ASME B16.25 : 2017 | BUTTWELDING ENDS |
| BS 1560-3.1:1989 | Circular flanges for pipes, valves and fittings (Class designated). Steel, cast iron and copper alloy flanges Specification for steel flanges |
| ASTM E 1509 : 2012 : R2017 | Standard Specification for Room Heaters, Pellet Fuel-Burning Type |
| API 599 RUSSIAN : 2013 | METAL PLUG VALVES - FLANGED, THREADED AND WELDING ENDS |
| API RP 14E : 1991 | RECOMMENDED PRACTICE FOR DESIGN AND INSTALLATION OF OFFSHORE PRODUCTION PLATFORM PIPING SYSTEMS |
| NFPA 14 : 2016 | INSTALLATION OF STANDPIPE AND HOSE SYSTEMS |
| ASTM A 1037/A1037M : 2005 | Standard Specification for Steel Line Pipe, Black, Furnace-butt-Welded |
| NFPA 54 : 2018 | NATIONAL FUEL GAS CODE |
| MSS SP 43 : 2013 | WROUGHT AND FABRICATED BUTT-WELDING FITTINGS FOR LOW PRESSURE, CORROSION RESISTANT APPLICATIONS |
| ISO 3183:2012 | Petroleum and natural gas industries Steel pipe for pipeline transportation systems |
| CSA/ANSI Z21.40.1 : 1996 : R2012 | GAS-FIRED, HEAT ACTIVATED AIR CONDITIONING AND HEAT PUMP APPLIANCES |
| ASTM F 2880 : 2014 : REDLINE | Standard Specification for Lap-Joint Type Flange Adapters for Polyethylene Pressure Pipe in Nominal Pipe Sizes <fraction><num>3/4</den></fraction > in. to 65 in. |
| N285.0-17/N285.6 SERIES-17 | General requirements for pressure-retaining systems and components in CANDU nuclear power plants / Material Standards for reactor components for CANDU nuclear power plants |
| DIN EN ISO 17292:2016-05 | METAL BALL VALVES FOR PETROLEUM, PETROCHEMICAL AND ALLIED INDUSTRIES (ISO 17292:2015) |
| ASME B16.49 : 2017 | FACTORY-MADE, WROUGHT STEEL, BUTTWELDING INDUCTION BENDS FOR TRANSPORTATION AND DISTRIBUTION SYSTEMS |
| API 574 : 2016 | INSPECTION PRACTICES FOR PIPING SYSTEM COMPONENTS |
| ISO 17292:2015 | Metal ball valves for petroleum, petrochemical and allied industries |
| CSA B242 : 2005 : R2016 | GROOVE- AND SHOULDER-TYPE MECHANICAL PIPE COUPLINGS |
| API 600 CHINESE : 2015 | STEEL GATE VALVES - FLANGED AND BUTT-WELDING ENDS, BOLTED BONNETS |
| UNE-EN ISO 17292:2016 | Metal ball valves for petroleum, petrochemical and allied industries (ISO 17292:2015) |
| ASTM A 523 : 1996 : R2012 | Standard Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits |
| CSA/ANSI Z21.40.1 : 1996 : INC : ADD A : 1997 : R2017 | GAS-FIRED, HEAT ACTIVATED AIR CONDITIONING AND HEAT PUMP APPLIANCES |
| ASME B16.34 : 2017 | VALVES - FLANGED, THREADED, AND WELDING END |
| ISO 27509:2012 | Petroleum and natural gas industries Compact flanged connections with IX seal ring |
| DIN EN ISO 3183:2013-03 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012) |
| EN 16767:2016 | Industrial valves - Steel and cast iron check valves |
| CSA N285.0 : 2006 | GENERAL REQUIREMENTS FOR PRESSURE-RETAINING SYSTEMS AND COMPONENTS IN CANDU NUCLEAR POWER PLANTS |
| CSA/ANSI Z21.72:19/CSA 11.2:19 | Portable type gas camp stoves |
| API 608 RUSSIAN : 2012 | METAL BALL VALVES - FLANGED, THREADED AND WELDING ENDS |
| BS 3602-1:1987 | Specification for steel pipes and tubes for pressure purposes: carbon and carbon manganese steel with specified elevated temperature properties Specification for seamless and electric resistance welded including induction welded tubes |
| ANSI Z21.97-2017/CSA 2.41-2017 | Outdoor decorative gas appliances |
| ASME B16.11 : 2016 | FORGED FITTINGS, SOCKET-WELDING AND THREADED |
| API 5L CHINESE : 2012 | SPECIFICATION FOR LINE PIPE |
| ASME B16.28 : 1994 | WROUGHT STEEL BUTT-WELDING SHORT RADIUS ELBOWS AND RETURNS |
| NASA SSTD 8070 0112 : 2001 | TEST COMPLEX LINE DESIGNATOR NUMBERS |
| EN ISO 13706:2011 | Petroleum, petrochemical and natural gas industries - Air-cooled heat exchangers (ISO 13706:2011) |
| CSA B149.1 : 2010 : R2015 | NATURAL GAS AND PROPANE INSTALLATION CODE |
| ANSI Z21.5.2-2016/CSA 7.2:2016 | GAS CLOTHES DRYERS, VOLUME 2, TYPE 2 CLOTHES DRYERS |
| CSA/ANSI Z21.50 : 2016 | VENTED DECORATIVE GAS APPLIANCES |
| PIP PLC00005:2018 | Design of ASME B31.8 Metallic Pipeline Systems within Facilities |
| API 661 : 2013(R2018) | PETROLEUM, PETROCHEMICAL, AND NATURAL GAS INDUSTRIES - AIR-COOLED HEAT EXCHANGERS |
| NFPA 55 : 2016 | COMPRESSED GASES AND CRYOGENIC FLUIDS CODE |
| ASTM E 1509 : 2012 | Standard Specification for Room Heaters, Pellet Fuel-Burning Type |
| DIN EN 16767:2016-08 | INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES |
| UNE 27768:2018 | Civil shipbuilding and ship repairing. Standardised components. Penetration pipe pieces: Flanged penetration piece with sleeve for PN10 and PN16, with ASTM tube |
| ASTM A 523 : 1996 : R2001 | Standard Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits |
| API 608 : 2012 | METAL BALL VALVES - FLANGED, THREADED, AND WELDING ENDS |
| CSA C22.2 No. 168 : 2016 | COMMERCIAL DISHWASHERS |
Important note : All end users must be registered with an Account prior to user licenses being assigned.Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.