AS/NZS 60079.10.1:2009
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Explosive atmospheres Classification of areas - Explosive gas atmospheres (IEC 60079-10-1, Ed.1.0(2008) MOD)
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
28-08-2024
Superseded by
Published date
18-09-2009
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.Adopts IEC 60079-10-1:2008, Ed.1.0 with national modifications to classify areas where flammable gas or vapour or mist hazards may arise for use as a basis to support the proper selection and installation of equipment for use in a hazardous area.
| Committee |
MS-011
|
| DevelopmentNote |
Under Revision by DR AS/NZS IEC 60079.10.1:2021. Under Revision by DR AS/NZS IEC 60079.10.1:2021.
|
| DocumentType |
Standard
|
| ISBN |
0 7337 9241 3
|
| Pages |
174
|
| PublisherName |
Standards Australia
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
|
| UnderRevision |
Originated in Australia as AS 1076.2 1977 and AS 2430.1 1981.
Originated in New Zealand as NZS 6101.1:1988.
Previous editions AS/NZS 60079.10:2004 and AS/NZS 2430, Parts 3.1 to 3.9 (2004).
Jointly revised amalgamated and redesignated as AS/NZS 60079.10.1:2009.
| AS 3814-2009 | Industrial and commercial gas-fired appliances |
| AS/NZS 4645.1:2008 | Gas distribution networks Network management |
| AS 5601-2004 | Gas installations |
| AS 2809.2-2008 | Road tank vehicles for dangerous goods Road tank vehicles for flammable liquids |
| AS 2809.4-2001 | Road tank vehicles for dangerous goods - Tankers for toxic and corrosive cargoes |
| AS/NZS 61241.3:1999 | Electrical apparatus for use in the presence of combustible dust Classification of areas where combustible dusts are or may be present |
| AS/NZS 2053.2:2001 | Conduits and fittings for electrical installations Rigid plain conduits and fittings of insulating material (Reconfirmed 2016) |
| AS/NZS 2053.7:2002 | Conduits and fittings for electrical installations Rigid metal conduits and fittings (Reconfirmed 2016) |
| AS/NZS 1677.1:1998 | Refrigerating systems Refrigerant classification |
| AS/NZS 1677.2:1998 | Refrigerating systems Safety requirements for fixed applications |
| AS/NZS 60079.20:2000 | Electrical apparatus for explosive gas atmospheres Data for flammable gases and vapours, relating to the use of electrical apparatus |
| AS/NZS 2381.1:2005 | Electrical equipment for explosive gas atmospheres - Selection, installation and maintenance General requirements |
| AS 1940-2004 | The storage and handling of flammable and combustible liquids |
| AS 2030.2-1996 | The verification, filling, inspection, testing and maintenance of cylinders for the storage and transport of compressed gases Cylinders for dissolved acetylene |
| AS/NZS 60079.0:2008 | Explosive atmospheres Equipment - General requirements |
| AS/NZS 2053.8:1995 | Conduits and fittings for electrical installations Flexible conduits and fittings of metal or composite material (Reconfirmed 2016) |
| AS/NZS 1668.1:1998 | The use of ventilation and airconditioning in buildings Fire and smoke control in multi-compartment buildings |
| AS 1074-1989 | Steel tubes and tubulars for ordinary service (Reconfirmed 2018) |
| AS 10745-1998 | Information technology - Open Systems Interconnection - Upper layers security model |
| AS 2030.1-2009 | Gas cylinders General requirements |
| AS/NZS 2053.3:1995 | Conduits and fittings for electrical installations Rigid plain conduits and fittings of fibre-reinforced concrete material (Reconfirmed 2016) |
| AS 2030.4-1985 | The verification, filling, inspection, testing and maintenance of cylinders for storage and transport of compressed gases Welded cylinders - Insulated |
| AS 2809.3-2008 | Road tank vehicles for dangerous goods Road tank vehicles for compressed liquefied gases |
| AS 2030.5-2009 | Gas cylinders Filling, inspection and testing of refillable cylinders |
| AS 2746-2008 | Working areas for gas-fuelled vehicles |
| AS 2380.4-1994 | Electrical equipment for explosive atmospheres - Explosion-protection techniques Pressurized rooms or pressurized enclosures (Reconfirmed 2013) |
| AS/NZS 2053.6:2001 | Conduits and fittings for electrical installations Profile-wall, smooth-bore conduits and fittings of insulating material (Reconfirmed 2016) |
| AS/NZS 2053.4:1995 | Conduits and fittings for electrical installations Flexible plain conduits and fittings of insulating material (Reconfirmed 2016) |
| AS/NZS 2229:2004 | Fuel dispensing equipment for explosive atmospheres |
| AS 2809.6-2001 | Road tank vehicles for dangerous goods Tankers for cryogenic liquids |
| AS/NZS 4114.1:2003 | Spray painting booths, designated spray painting areas and paint mixing rooms Design, construction and testing |
| AS/NZS 2243.8:2006 | Safety in laboratories - Fume cupboards |
| AS/NZS 2053.1:2001 | Conduits and fittings for electrical installations General requirements (Reconfirmed 2016) |
| AS 2809.5-2001 | Road tank vehicles for dangerous goods Tankers for bitumen-based products |
| AS/NZS 2053.5:2001 | Conduits and fittings for electrical installations Corrugated conduits and fittings of insulating material (Reconfirmed 2016) |
| AS/NZS 4645.3:2008 | Gas distribution networks Plastics pipe systems |
| AS 2809.1-2008 | Road tank vehicles for dangerous goods General requirements for all road tank vehicles |
| AS 1482-1985 | Electrical equipment for explosive atmospheres - Protection by ventilation - Type of protection v (Reconfirmed 2013) |
| AS/NZS 4645.2:2008 | Gas distribution networks Steel pipe systems |
| AS 2885.1-2007 | Pipelines - Gas and liquid petroleum Design and construction |
| AS 3754-1990 | Safe application of powder coatings by electrostatic spraying |
| AS/NZS 1596:2008 | The storage and handling of LP Gas |
| AS 4647-2011 | Diaphragm gas meters |
| AS/NZS 60079.17:2009 | Explosive atmospheres Electrical installations inspection and maintenance (IEC 60079-17, Ed.4.0 (2007) MOD) |
| AS 1940:2017 | The storage and handling of flammable and combustible liquids |
| AS/NZS 2982:2010 | Laboratory design and construction |
| AS/NZS 2243.6:2010 | Safety in laboratories Plant and equipment aspects |
| AS/NZS 1716:2012 | Respiratory protective devices (Reconfirmed 2024) |
| AS/NZS 1425:2013 | LP Gas fuel systems for vehicle engines |
| AS/NZS 3010:2017 | Electrical installations - Generating sets |
| AS 3640-2009 | Workplace atmospheres - Method for sampling and gravimetric determination of inhalable dust |
| AS/NZS 2243.8:2014 | Safety in laboratories Fume cupboards |
| AS/NZS 4645.1:2018 | Gas distribution networks Network management |
| AS/NZS 4871.1:2010 | Electrical equipment for mines and quarries General requirements |
| SA HB 148:2016 | LP Gas leak identification and assessment of in-service road tankers |
| SA TS 19883:2020 | Safety of pressure swing adsorption systems for hydrogen separation and purification (ISO/TS 19883:2017, MOD) |
| AS/NZS 60079.33:2012 | Explosive atmospheres Equipment protection by special protection 's' (Reconfirmed 2024) |
| AS/NZS 2081:2011 | Electrical protection devices for mines and quarries (Reconfirmed 2022) |
| AS 2809.2:2020 | Road tank vehicles for dangerous goods Road tank vehicles for flammable liquids |
| AS 2809.1:2020 | Road tank vehicles for dangerous goods General requirements for all road tank vehicles |
| AS 3961:2017 | The storage and handling of liquefied natural gas |
| HB 239:2011 | Guidance on the repair and overhaul of electrical equipment for explosive atmospheres |
| AS 2985-2009 | Workplace atmospheres - Method for sampling and gravimetric determination of respirable dust |
| AS 2809.6:2019 | Road tank vehicles for dangerous goods Tankers for cryogenic liquids |
| AS 5092-2009 | CNG refuelling stations |
| AS/NZS 4114:2020 | Spray painting booths, designated spray painting areas and paint mixing rooms |
| AS/NZS 5601.1:2013 | Gas installations General installations |
| AS/NZS 3084:2017 | Telecommunications installations - Telecommunications pathways and spaces for commercial buildings |
| AS/NZS 5026:2012 | The storage and handling of Class 4 dangerous goods (Reconfirmed 2024) |
| AS 2359.2-2013 | Powered industrial trucks Operations |
| AS/NZS 60079.31:2014 | Explosive atmospheres Equipment dust ignition protection by enclosure "t" |
| AS 2067:2016 | Substations and high voltage installations exceeding 1 kV a.c. |
| AS/NZS 1680.2.4:2017 | Interior and workplace lighting Industrial tasks and processes |
| AS/NZS 5601.1:2010 | Gas installations General installations |
| AS 4983-2010 | Gas fuel systems for forklifts and industrial engines |
| AS/NZS 60079.15:2011 | Explosive atmospheres Equipment protection by type of protection 'n' |
| AS ISO 21789:2014 | Gas turbine applications - Safety |
| AS/NZS 4871.1:2012 | Electrical equipment for mines and quarries General requirements |
| AS 2809.4:2017 | Road tank vehicles for dangerous goods Tankers for toxic and corrosive cargoes |
| AS/NZS 4871.3:2010 | Electrical equipment for mines and quarries Substations |
| AS 1375-2013 | Industrial fuel-fired appliances |
| AS/NZS 3000:2018 (Unamended Hardcopy + Amendments) | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
| AS/NZS 60079.14:2009 | Explosive atmospheres Electrical installations design, selection and erection (IEC 60079-14, Ed. 4.0 (2007) MOD) |
| AS 2885.1-2012 | Pipelines - Gas and liquid petroleum Design and construction |
| AS/NZS 3007:2013 | Electrical equipment in mines and quarries - Surface installations and associated processing plant |
| AS/NZS 2311:2017 | Guide to the Painting of Buildings |
| AS/NZS 1596:2014 | The storage and handling of LP Gas |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.