AS/NZS 4158:2003
Current
The latest, up-to-date edition.
Thermal-bonded polymeric coatings on valves and fittings for water industry purposes (Reconfirmed 2015)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
05-03-2003
Important note : All end users must be registered with an Account prior to user licenses being assigned.
​Specifies the requirements for factory-applied thermal-bonded polymeric corrosion protective coatings (barrier coatings).
| Committee |
WS-022
|
| DocumentType |
Standard
|
| ISBN |
0 7337 5033 8
|
| Pages |
17
|
| ProductNote |
Reconfirmed 23/04/2015.This standard has been reconfirmed in Australia in 2015 and remains current in New Zealand. Reconfirmation Notice 23/04/2015
|
| PublisherName |
Standards Australia
|
| Status |
Current
|
| Supersedes |
This Standard specifies the requirements for factory-applied thermal-bonded polymeric corrosion protective coatings (barrier coatings). For the purposes of this Standard, the term polymeric coating is intended to encompass both thermoplastic and thermosetting coating materials, which are used to coat both the internal and external surfaces of valves and fittings. This Standard covers the following service application areas: (a) Factory-applied coatings and associated coatings used for repair. (b) Ductile iron, grey cast iron, malleable iron, steel and copper alloy based substrates. (c) Valves, fittings and their components and associated equipment.(d) Contact with water, and wastewater up to 50°C.(e) Above and below ground exposure. NOTES: 1 Some coatings may not be suitable for all wastewaters. Compatibility should be checked with the manufacturer. 2 Guidelines on requirements to be specified by the purchaser are given in Appendix A. Means of demonstrating compliance with this Standard are given in Appendix B.
Originated as AS/NZS 4158.1:1994.
Previous edition 1996.
Second edition 2003.
Reissued incorporating Amendment No. 1 (September 2005).
| HB 18.28-1991 | Guidelines for third-party certification and accreditation - Guide 28: General rules for a model third-party certification system for products |
| AS 3894.4-2002 | Site testing of protective coatings Assessment of degree of cure |
| AS 3894.1-2002 | Site testing of protective coatings Non-conductive coatings - Continuity testing - High voltage (brush) method (Reconfirmed 2013) |
| AS 4352-2005 | Tests for coating resistance to cathodic disbonding |
| AS 3894.3-2002 | Site testing of protective coatings Determination of dry film thickness (Reconfirmed 2013) |
| AS 3862-1991 | External fusion-bonded epoxy coating for steel pipes |
| AS 1580.408.2-2004 | Paints and related materials - Methods of test Adhesion - Knife test (Reconfirmed 2019) |
| AS 1580.408.2-1993 | Paints and related materials - Methods of test Adhesion - Knife test |
| AS/NZS 3500.0:1995 | National Plumbing and Drainage Code Glossary of terms |
| AS 1199-1988 | Sampling procedures and tables for inspection by attributes |
| HB 18.28-2005 | Conformity assessment - Guidance on a third-party certification system for products |
| AS/NZS 4020:2005 | Testing of products for use in contact with drinking water |
| AS 1145.3-2001 | Determination of tensile properties of plastics materials - Test conditions for films and sheets |
| AS/NZS 4352:1995 | Tests for coating resistance to cathodic disbonding |
| AS/NZS 4020:2002 | Testing of products for use in contact with drinking water |
| AS/NZS 3500.0:2003 | Plumbing and drainage Glossary of terms |
| AS 2419.3-2012 | Fire hydrant installations Fire brigade booster connections |
| AS 5200.458-2008 | Plumbing and drainage products Universal plastic-bodied transition couplings |
| AS 2118.1:2017 | Automatic fire sprinkler systems General systems |
| AS/NZS 2638.1:2011 | Gate valves for waterworks purposes Metal seated (Reconfirmed 2022) |
| AS/NZS 2845.1:2010 | Water supply - Backflow prevention devices Materials, design and performance requirements |
| AS 5830.1-2012 | In-line ball valves for use in plumbing water supply systems Metal-bodied |
| AS 4181-2013 | Repair and off-take clamps for water industry purposes (Reconfirmed 2023) |
| AS/NZS 2638.2:2011 | Gate valves for waterworks purposes Resilient seated (Reconfirmed 2022) |
| AS 4793:2020 | Mechanical tapping bands for waterworks purposes |
| AS/NZS 4998:2009 | Bolted unrestrained mechanical couplings for waterworks purposes (Reconfirmed 2022) |
| AS 2419.1:2017 | Fire hydrant installations System design, installation and commissioning |
| AS/NZS 4793:2009 | Mechanical tapping bands for waterworks purposes |
| AS 5081-2008 | Hydraulically operated automatic control valves for waterworks purposes (Reconfirmed 2016) |
| AS 4956-2008 | Air valves for water supply |
| AS 4795.1-2011 | Butterfly valves for waterworks purposes Wafer and lugged (Reconfirmed 2022) |
| AS 4883-2008 | Air valves for sewerage |
| AS 4883:2017 | Air valves for sewerage |
| AS 2638.2-2006 | Gate valves for waterworks purposes - Resilient seated |
| AS/NZS 2280:2004 | Ductile iron pipes and fittings |
| AS 4795-2006 | Butterfly valves for waterworks purposes |
| ATS 5200.012-2005 | Technical Specification for plumbing and drainage products In-line valves for use in plumbing water supply systems - Miscellaneous types metallic and non-metallic |
| ATS 5200.491-2010 | Technical Specification for plumbing and drainage products Aluminium alloy piping system with plastics lining for plumbing water service applications |
| AS/NZS 2280:2014 | Ductile iron pipes and fittings |
| AS/NZS 2280:2020 | Ductile iron pipes and fittings |
| AS/NZS 2845.1:1998 | Water supply - Backflow prevention devices Materials, design and performance requirements |
| AS/NZS 3497:1998 | Drinking water treatment units - Plumbing requirements |
| AS 4956:2017 | Air valves for water supply |
| AS 3952-2002 | Water supply - Spring hydrant valve for waterworks purposes (Reconfirmed 2015) |
| AS/NZS 4129:2008 | Fittings for polyethylene (PE) pipes for pressure applications |
| AS 4795.2-2011 | Butterfly valves for waterworks purposes Double flanged |
| AS/NZS 2280:2012 | Ductile iron pipes and fittings |
| AS 2419.1-2005 | Fire hydrant installations System design, installation and commissioning |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.