AS/NZS 4020:1999
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Products for use in contact with drinking water
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
29-05-2024
05-07-1999
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Specifies requirements for the suitability of products for use in contact with drinking water. Appendices contain test methods for evaluating those parameters that may adversely affect the quality of the water. The use of scaling factors to relate these parameters to end-use conditions is provided.
| Committee |
CH-034
|
| DocumentType |
Standard
|
| ISBN |
0 7337 2750 6
|
| Pages |
60
|
| ProductNote |
*. Particular consideration has been given to BS 6920 in the preparation of. this standard. Several of the test procedures given in BS 6920 have been. adopted or modified for Australian requirements
|
| PublisherName |
Standards Australia
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This Standard specifies requirements for the suitability of products for use in contact with drinking water, with regard to their effect on the quality of water. These products include all items such as pipes, fittings, components, and materials used in coating, protection, lining, jointing, sealing and lubrication applications in the water supply and plumbing industry. The Standard requires that products intended for use in contact with drinking water be tested by exposure to extractant waters. Where appropriate, a scaling factor is applied to such tests to compensate for differences between laboratory and field conditions.This Standard does not take into account possible changes in materials, methods of manufacture or installation, nor is any consideration given to the frequency of testing of products.This Standard attempts to reproduce the types of conditions experienced during site application. However, where materials are mixed on site, often in approximate proportions, and cured in adverse conditions of temperature and humidity, this will not always be achieved.
First published in Australia as AS 3855(Int)-1991.
Redesignated AS 4020(Int)-1992.
Second edition 1994.
Jointly revised and designated AS/NZS 4020:1999.
| AS 2567-1994 | Laminar flow cytotoxic drug safety cabinets |
| AS/NZS 1568:1998 | Copper and copper alloys - Forging stock and forgings |
| AS 4276.2-1995 | Water microbiology Culture media, diluents and reagents (Reconfirmed 2013) |
| AS 1432-1996 | Copper tubes for plumbing, gasfitting and drainage applications |
| AS/NZS 1580.107.3:1997 | Paints and related materials - Methods of test Determination of wet film thickness by gauge (Reconfirmed 2013) |
| AS/NZS 2243.3:1995 | Safety in laboratories Microbiology |
| AS/NZS 1477:1999 | PVC pipes and fittings for pressure applications |
| AS 2031.2-1987 | Selection of containers and preservation of water samples for chemical and microbiological analysis - Microbiological |
| AS 1012.8-1986 | Methods of testing concrete Method for making and curing concrete compression, indirect tensile and flexure test specimens, in the laboratory or in the field |
| AS 3688-1994 | Water supply - Copper and copper alloy body compression and capillary fittings and threaded-end connectors |
| AS 1281-2001 | Cement mortar lining of steel pipes and fittings (Reconfirmed 2018) |
| AS 4032.2-2002 | Water supply - Valves for the control of hot water supply temperatures - Tempering valves and end of line temperature actuated devices |
| AS/NZS 4765(INT):2000 | Modified PVC (PVC-M) pipes for pressure applications |
| AS 1646.1-2000 | Elastomeric seals for waterworks purposes - General requirements |
| AS 4321-2001 | Fusion-bonded medium-density polyethylene coating and lining for pipes and fittings (Reconfirmed 2019) |
| AS/NZS 4130:2001 | Polyethylene (PE) pipes for pressure applications |
| AS/NZS 3666.1:2002 | Air-handling and water systems of buildings - Microbial control Design, installation and commissioning |
| AS/NZS 4129:2000 | Fittings for polyethylene (PE) pipes for pressure applications |
| AS 2638.1-2002 | Gate valves for waterworks purposes Metal seated |
| AS 2698.2-2000 | Plastics pipes and fittings for irrigation and rural applications Polyethylene rural pipe (Reconfirmed 2017) |
| AS/NZS 3500.5:2000 | Plumbing and Drainage Domestic installations |
| AS/NZS 4131:2001 | Polyethylene (PE) compounds for pressure pipes and fittings |
| MP 52-2001 | Manual of authorization procedures for plumbing and drainage products |
| AS 2638.2-2002 | Gate valves for waterworks purposes - Resilient seated |
| AS 3952-2002 | Water supply - Spring hydrant valve for waterworks purposes (Reconfirmed 2015) |
| AS 4796-2001 | Water supply - Metal bodied and plastic bodied ball valves for property service connection |
| AS 4794-2001 | Non-return valves for waterworks purposes - Swing check and tilting disc (Reconfirmed 2015) |
| AS 1579-2001 | Arc-welded steel pipes and fittings for water and wastewater (Reconfirmed 2018) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.