AS/NZS 3007:2013
Current
Current
The latest, up-to-date edition.
Electrical equipment in mines and quarries - Surface installations and associated processing plant
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English
Published date
24-06-2013
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.Applies to the design, installation and operation of electrical plant and equipment installed at surface mining and quarrying operations, the surface of underground mines, and associated processing plants.
| Committee |
EL-023
|
| DocumentType |
Standard
|
| ISBN |
978 1 74342 516 9
|
| Pages |
112
|
| PublisherName |
Standards Australia
|
| Status |
Current
|
| Supersedes |
Originated in Australia as AS 3007.1-1982, AS 3007.2-1982, AS 3007.3-1982, AS 3007.4-1985 and AS 3007.5-1987.
Previous editions AS 3007.1-2004, AS 3007.2-2004, AS 3007.3-2004, AS 3007.4-2004 and AS 3007.5-2004.
Jointly revised, amalgamated and redesignated AS/NZS 3007:2013.
| AS ISO 14520.14-2009 | Gaseous fire-extinguishing systems - Physical properties and system design IG-55 extinguishant (ISO 14520-14:2005, MOD) |
| AS/NZS 1299:2009 | Electrical equipment for mines and quarries - Explosion-protected three-phase restrained plugs and receptacles for working voltages up to and including 3.3 kV (Reconfirmed 2020) |
| AS 62061-2006 | Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems |
| AS 4024.1101-2006 | Safety of machinery Terminology - Terms and definitions |
| AS/NZS ISO 31000:2009 | Risk management - Principles and guidelines |
| AS 7240.2-2004 | Fire detection and alarm systems Control and indicating equipment (ISO 7240-2:2003, MOD) |
| AS 60974.6-2006 | Arc welding equipment Limited duty portable arc welding and allied process power sources (IEC 60974-6:2003, MOD) |
| AS/NZS 61000.6.2:2006 | Electromagnetic compatibility (EMC) General standards - Immunity for industrial environments (Reconfirmed 2016) |
| AS/NZS 61000.1.1:2000 | Electromagnetic compatibility (EMC) General - Application and interpretation of fundamental definitions and terms (Reconfirmed 2016) |
| AS ISO 14520.11-2009 | Gaseous fire-extinguishing systems - Physical properties and system design HFC 236fa extinguishant (ISO 14520-11:2005, MOD) |
| AS/NZS 60079.29.2:2008 | Explosive atmospheres Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen |
| AS 61508.0-2006 | Functional safety of electrical/electronic/programmable electronic safety-related systems Functional safety and AS 61508 (Reconfirmed 2015) |
| AS 4024.4-1998 | Safeguarding of machinery Installation and commissioning requirements for electro-sensitive systems - Pressure-sensitive devices (Reconfirmed 2016) |
| AS 2118.5-2008 | Automatic fire sprinkler systems Home fire sprinkler systems (Reconfirmed 2020) |
| AS/NZS 1747:2003 | Reeling, trailing and feeder cables used for mining - Repair, testing and fitting of accessories (Reconfirmed 2020) |
| AS 7240.10-2007 | Fire detection and alarm systems Point-type flame detectors |
| AS 2118.8-1997 | Automatic fire sprinkler systems Minor modifications (Reconfirmed 2013) |
| AS 4024.1801-2006 | Safety of machinery Safety distances to prevent danger zones being reached by the upper limbs |
| AS 2067-2008 | Substations and high voltage installations exceeding 1 kV a.c. |
| AS/NZS 60079.14:2009 | Explosive atmospheres Electrical installations design, selection and erection (IEC 60079-14, Ed. 4.0 (2007) MOD) |
| AS 4024.1901-2006 | Safety of machinery Displays, controls, actuators and signals - Ergonomic requirements for the design of displays and control actuators - General principles for human interactions with displays and control actuators |
| AS 60044.2-2007 | Instrument transformers Inductive voltage transformers (IEC 60044-2:Ed.1.2 (2003) MOD) |
| AS 1824.1-1995 | Insulation co-ordination Definitions, principles and rules |
| AS 62040.2-2008 | Uninterruptible power systems (UPS) Electromagnetic compatibility (EMC) requirements |
| AS 2118.10-1995 | Automatic fire sprinkler systems Approval documentation (Reconfirmed 2013) |
| AS/NZS 1768:2007 | Lightning protection |
| AS 1603.7-1996 | Automatic fire detection and alarm systems Optical beam smoke detectors (Reconfirmed 2016) |
| AS/NZS 61000.2.12:2003 | Electromagnetic compatibility (EMC) Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public medium-voltage power supply systems (Reconfirmed 2013) |
| AS/NZS 61000.3.4:2007 | Electromagnetic compatibility (EMC) Limits - Limitation of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater than 75 A (Reconfirmed 2018) |
| AS/NZS 61000.2.2:2003 | Electromagnetic compatibility (EMC) Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems (Reconfirmed 2013) |
| AS/NZS 61000.4.30:2012 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Power quality measurement methods |
| AS/NZS 61000.4.13:2012 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests |
| AS 60529-2004 | Degrees of protection provided by enclosures (IP Code) (Reconfirmed 2018) |
| AS 61508.4-2011 | Functional safety of electrical/electronic/programmable electronic safety-related systems Definitions and abbreviations (Reconfirmed 2023) |
| AS/NZS 61000.3.2:2007 | Electromagnetic compatibility (EMC) Limits - Limits for harmonic current emissions (equipment input current (16 A per phase) (IEC 61000-3-2, Ed. 3.0 (2005) MOD) |
| AS/NZS 4871.1:2012 | Electrical equipment for mines and quarries General requirements |
| AS/NZS 60079.10.1:2009 | Explosive atmospheres Classification of areas - Explosive gas atmospheres (IEC 60079-10-1, Ed.1.0(2008) MOD) |
| AS/NZS 3000:2007 | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
| AS/NZS 4024.1:2006 Series | Safety of machinery Safety of machinery series |
| AS 4024.1401-2006 | Safety of machinery Ergonomic principles - Design principles - Terminology and general principles |
| AS 4024.2601-2008 | Safety of machinery Design of controls, interlocks and guarding - Two-hand control devices - Functional aspects and design principles |
| AS 2290.3-1990 | Electrical equipment for coal mines - Maintenance and overhaul - Maintenance of gas detecting and monitoring equipment |
| AS 7240.7-2004 | Fire detection and alarm systems Point-type smoke detectors using scattered light, transmitted light or ionization (ISO 7240-7:2003, MOD) (Reconfirmed 2016) |
| AS/NZS 61000.4.27:2012 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Unbalance, immunity test for equipment with input current not exceeding 16 A per phase (Reconfirmed 2023) |
| AS 1603.13-1998 | Automatic fire detection and alarm systems - Duct sampling units |
| AS 4024.3001-2009 | Safety of machinery Materials forming and shearing - Mechanical power presses |
| AS 4024.3002-2009 | Safety of machinery Materials forming and shearing - Hydraulic power presses |
| AS 4024.1803-2006 | Safety of machinery Safety distances and safety gaps - Minimum gaps to prevent crushing of parts of the human body |
| AS 4024.3101-2008 | Safety of machinery Materials cutting - Milling machines (including boring machines) - Safety requirements (Reconfirmed 2018) |
| AS 4024.1604-2006 | Safety of machinery Design of controls, interlocks and guarding - Emergency stop - Principles for design |
| AS/NZS 3001:2008 | Electrical installations - Transportable structures and vehicles including their site supplies |
| AS/NZS 4871.3:2010 | Electrical equipment for mines and quarries Substations |
| AS 1603.15-2002 | Automatic fire detection and alarm systems - Remote indicators |
| AS IEC 61511.3-2004 | Functional safety - Safety instrumented systems for the process industry sector - Guidance for the determination of the required safety integrity levels (Reconfirmed 2015) |
| AS ISO 14520.15-2009 | Gaseous fire-extinguishing systems - Physical properties and system design IG-541 extinguishant (ISO 14520-15:2005, MOD) |
| AS 7240.11-2008 | Fire detection and alarm systems Manual call points (ISO 7240-11:2005, MOD) |
| AS 1603.3-1996 | Automatic fire detection and alarm systems - Heat alarms |
| AS 61508.5-2011 | Functional safety of electrical/electronic/programmable electronic safety-related systems Examples of methods for the determination of safety integrity levels (Reconfirmed 2023) |
| AS 7240.8-2007 | Fire detection and alarm systems Carbon monoxide fire detectors using an electro-chemical cell in combination with a heat sensor |
| AS 1603.2-1997 | Automatic fire detection and alarm systems Point type smoke detectors (Reconfirmed 2016) |
| AS/NZS 3012:2010 | Electrical installations - Construction and demolition sites |
| AS 7240.5-2004 | Fire detection and alarm systems Point type heat detectors (ISO 7240-5:2003, MOD) (Reconfirmed 2016) |
| AS 4024.1201-2006 | Safety of machinery - General principles - Basic terminology and methodology |
| AS 7240.1-2007 | Fire detection and alarm systems - General and definitions |
| AS 2118.3-2010 | Automatic fire sprinkler systems Deluge systems |
| AS 1674.2-2007 | Safety in welding and allied processes Electrical (Reconfirmed 2018) |
| AS/NZS 3439.1:2002 | Low-voltage switchgear and controlgear assemblies Type-tested and partially type tested assemblies (IEC 60439-1:1999 MOD) |
| AS 4024.1902-2006 | Safety of machinery Displays, controls, actuators and signals - Ergonomic requirements for the design of displays and control actuators - Displays |
| AS 2118.4-2012 | Automatic fire sprinkler systems Sprinkler protection for accommodation buildings not exceeding four storeys in height |
| AS 4024.1301-2006 | Safety of machinery Risk assessment - Principles of risk assessment |
| AS/NZS 61000.2.5:1999 | Electromagnetic compatibility (EMC) Environment - Classification of electromagnetic environments (Reconfirmed 2016) |
| AS 1670.4-2004 | Fire detection, warning, control and intercom systems - System design, installation and commissioning Sound systems and intercom systems for emergency purposes |
| AS/NZS 2802:2000 | Electric cables - Reeling and trailing - For mining and general use (other than underground coal mining) (Reconfirmed 2020) |
| AS 4024.1501-2006 | Safety of machinery Design of safety related parts of control systems - General principles for design (Reconfirmed 2014) |
| AS 4024.1907-2006 | Safety of machinery Displays, controls, actuators and signals - System of auditory and visual danger and information signals |
| AS/NZS 61000.4.16:2002 | |
| AS/NZS 61000.4.11:2005 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests (IEC 61000-4-11, Ed. 2.0 (2004) MOD) (Reconfirmed 2016) |
| AS 1603.11-2010 | Automatic fire detection and alarm systems Visual warning devices |
| AS 4024.1302-2006 | Safety of machinery Risk assessment - Reduction of risks to health and safety from hazardous substances emitted by machinery - Principles and specifications for machinery manufacturers |
| AS 1319-1994 | Safety signs for the occupational environment (Reconfirmed 2018) |
| AS 4024.1202-2006 | Safety of machinery General principles - Technical principles |
| AS 1603.16-2002 | Automatic fire detection and alarm systems - In situ testers |
| AS 2118.9-1995 | Automatic fire sprinkler systems Piping support and installation (Reconfirmed 2013) |
| AS/NZS 4240.3:2013 | Remote control systems for mining equipment Operation and maintenance for underground coal mining |
| AS 4024.1704-2006 | Safety of machinery Human body measurements - Anthropometric data |
| AS ISO 14520.10-2009 | Gaseous fire-extinguishing systems - Physical properties and system design HFC 23 extinguishant (ISO 14520-10:2005, MOD) |
| AS ISO 14520.1-2009 | Gaseous fire-extinguishing systems - Physical properties and system design General requirements (ISO 14520-1:2006, MOD) |
| AS 7240.12-2007 | Fire detection and alarm systems Line type smoke detectors using a transmitted optical beam |
| AS 61508.7-2011 | Functional safety of electrical/electronic/programmable electronic safety-related systems Overview of techniques and measures (Reconfirmed 2023) |
| AS 4024.1603-2006 | Safety of machinery Design of controls, interlocks and guards - Prevention of unexpected start-up (Reconfirmed 2014) |
| AS 7240.13-2006 | Fire detection and alarm systems Compatibility assessment of system components (Reconfirmed 2016) |
| AS/NZS 61000.6.3:2012 | Electromagnetic compatibility (EMC) Generic standards - Emission standard for residential, commercial and light-industrial environments |
| AS 62040.1.2-2003 | Uninterruptible power systems (UPS) General and safety requirements for UPS used in restricted access locations |
| AS 1670.6-1997 | Fire detection, warning, control and intercom systems - System design, installation and commissioning Smoke alarms |
| AS 7240.4-2004 | Fire detection and alarm systems Power supply equipment (ISO 7240-4:2003, MOD) |
| AS 2293.1-2005 | Emergency escape lighting and exit signs for buildings System design, installation and operation |
| AS/NZS 5603:2009 | Stand-alone inverters - Performance requirements (Reconfirmed 2017) |
| AS 7240.15-2004 | Fire detection and alarm systems Point type fire detectors using scattered light, transmitted light or ionization sensors in combination with a heat sensor (ISO 7240-15:2004, MOD) (Reconfirmed 2016) |
| AS/NZS 1850:2009 | Portable fire extinguishers - Classification, rating and performance testing (Reconfirmed 2021) |
| AS 2700-2011 | Colour standards for general purposes (Reconfirmed 2022) |
| AS/NZS 61000.3.11:2002 | Electromagnetic compatibility (EMC) Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current less than or equal to 75 A and subject to conditional connection (Reconfirmed 2013) |
| AS 61508.1-2011 | Functional safety of electrical/electronic/programmable electronic safety-related systems General requirements (Reconfirmed 2023) |
| AS 7240.6-2006 | Fire detection and alarm systems Carbon monoxide fire detectors using electro-chemical cells (Reconfirmed 2016) |
| AS 60076.1-2005 | Power transformers General (IEC 60076-1, Ed. 2.1 (2000) MOD) |
| AS/NZS 3010:2005 | Electrical installations - Generating sets |
| AS 4024.2801-2008 | Safety of machinery Safety distances and safety gaps - Positioning of protective equipment with respect to the approach speed of parts of the human body |
| AS 61508.2-2011 | Functional safety of electrical/electronic/programmable electronic safety-related systems Requirements for electrical/electronic/programmable electronic safety-related systems (Reconfirmed 2023) |
| AS 4024.1502-2006 | Safety of machinery Design of safety related parts of control systems - Validation (Reconfirmed 2014) |
| AS/NZS 61000.4.7:2012 | Electromagnetic compatibility (EMC) Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto (Reconfirmed 2023) |
| AS 2118.1-2006 | Automatic fire sprinkler systems General systems |
| AS 60044.1-2007 | Instrument transformers Current transformers (IEC 60044-1 Ed.1.2 (2003) MOD) (Reconfirmed 2016) |
| AS/NZS 4763:2011 | Safety of portable inverters (Reconfirmed 2024) |
| AS 7240.22-2008 | Fire detection and alarm systems Smoke-detection equipment for ducts (ISO 7240-22:2007, MOD) |
| AS 1824.2-1985 | Insulation coordination (phase-to-earth and phase-to-phase, above 1 kV) - Application guide |
| AS 4024.1905-2006 | Safety of machinery Displays, controls, actuators and signals - Indication, marking and actuation - Requirements for marking |
| AS 61508.3-2011 | Functional safety of electrical/electronic/programmable electronic safety-related systems Software requirements (Reconfirmed 2023) |
| AS/NZS 61000.6.1:2006 | Electromagnetic compatibility (EMC) Generic standards - Immunity for residential, commercial and light industrial environments (Reconfirmed 2016) |
| AS 61508.6-2011 | Functional safety of electrical/electronic/programmable electronic safety-related systems Guidelines on the application of IEC 61508-2 and IEC 61508-3 (Reconfirmed 2023) |
| AS 4024.3301-2009 | Safety of machinery Robots for industrial environments - Safety requirements |
| AS 4024.1703-2006 | Safety of machinery Principles for determining the dimensions required for access openings |
| AS 4024.1904-2006 | Safety of machinery Displays, controls, actuators and signals - Indication, marking and actuation - Requirements for visual, auditory and tactile signals |
| AS 4024.1802-2006 | Safety of machinery Safety distances and safety gaps - Safety distances to prevent danger zones being reached by the lower limbs |
| AS/NZS 61000.2.4:2009 | Electromagnetic compatibility (EMC) Environment-Compatibility levels in industrial plants for low-frequency conducted disturbances (Reconfirmed 2020) |
| AS 1603.8-1996 | Automatic fire detection and alarm systems Multi-point aspirated smoke detectors (Reconfirmed 2016) |
| AS/NZS 61000.3.5:1998 | Electromagnetic compatibility (EMC) Limits - Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 16 A |
| AS 1670.1-2004 | Fire detection, warning, control and intercom systems - System design, installation and commissioning Fire |
| AS 1603.17-2011 | Automatic fire detection and alarm systems Warning equipment for people with hearing impairment |
| AS/NZS 3100:2009 | |
| AS 61800.3-2005 | Adjustable speed electrical power drive systems EMC requirements and specific test methods (Reconfirmed 2016) |
| AS/NZS 61000.3.12:2006 | Electromagnetic compatibility (EMC) Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current greater than 16 A and less than or equal to 75 A per phase |
| AS/NZS 1020:1995 | The control of undesirable static electricity |
| AS IEC 61511.1-2004 | Functional safety - Safety instrumented systems for the process industry sector - Framework, definitions, systems, hardware and software requirements |
| AS 2444-2001 | Portable fire extinguishers and fire blankets - Selection and location (Reconfirmed 2021) |
| AS ISO 14520.13-2009 | Gaseous fire-extinguishing systems - Physical properties and system design IG-100 extinguishant (ISO 14520-13:2005, MOD) |
| AS/NZS 4836:2011 | Safe working on or near low-voltage electrical installations and equipment |
| AS/NZS 4240.1:2009 | Remote control systems for mining equipment Design, construction, testing, installation and commissioning (Reconfirmed 2021) |
| AS 2665-2001 | Smoke/heat venting systems - Design, installation and commissioning (Reconfirmed 2016) |
| AS ISO 14520.12-2009 | Gaseous fire-extinguishing systems - Physical properties and system design IG-01 extinguishant (ISO 14520-12:2005, MOD) |
| AS 1603.14-2001 | Automatic fire detection and alarm systems - Point type carbon monoxide (CO) fire detectors |
| AS 1318-1985 | Use of colour for the marking of physical hazards and the identification of certain equipment in industry (known as the SAA Industrial Safety Colour Code) |
| AS 60204.1-2005 | Safety of machinery - Electrical equipment of machines General requirements (IEC 60204-1, Ed. 5 (FDIS) MOD) |
| AS 4024.1701-2006 | Safety of machinery Human body measurements - Basic human body measurements for technological design |
| AS/NZS 61000.4.5:2006 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Surge immunity test |
| AS 4024.5-1998 | Safeguarding of machinery Manufacturing and testing requirements for electro-sensitive systems - Pressure-sensitive devices |
| AS 61508 Supp1-2012 | Functional safety of electrical/electronic/programmable electronic safety-related systems, Supplement 1: Commented version (Supplement to AS 61508 series) (Reconfirmed 2023) |
| AS/NZS 60079.10.2:2011 | Explosive atmospheres Classification of areas - Combustible dust atmospheres |
| AS/NZS 3008.1.1:2009 | Electrical installations - Selection of cables Cables for alternating voltages up to and including 0.6/1 kV - Typical Australian installation conditions |
| AS 4024.1602-2006 | Safety of machinery Interlocking devices associated with guards - Principles for design and selection |
| AS 60974.1-2006 | Arc welding equipment Welding power sources (IEC 60974-1:2000, MOD) |
| AS 1603.1-1997 | Automatic fire detection and alarm systems Heat detectors (Reconfirmed 2016) |
| AS 4024.1702-2006 | Safety of machinery Human body measurements - Principles for determining the dimensions required for openings for whole body access into machinery |
| AS 1603.5-1996 | Automatic fire detection and alarm systems Manual call points (Reconfirmed 2016) |
| AS/NZS 61000.4.8:2012 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Power frequency magnetic field immunity test (Reconfirmed 2023) |
| AS 62040.1.1-2003 | Uninterruptible power systems (UPS) General and safety requirements for UPS used in operator access areas |
| AS 60076.11-2006 | Power transformers Dry-type transformers (Reconfirmed 2016) |
| AS 7240.21-2006 | Fire detection and alarm systems - Routing equipment |
| AS 1755-2000 | Conveyors - Safety requirements |
| AS/NZS 61000.6.4:2012 | Electromagnetic compatibility (EMC) Generic standards - Emission standard for industrial environments |
| AS 60044.5-2004 | Instrument transformers Capacitor voltage transformers |
| AS/NZS 60079.17:2009 | Explosive atmospheres Electrical installations inspection and maintenance (IEC 60079-17, Ed.4.0 (2007) MOD) |
| AS/NZS 61000.2.3:1999 | Electromagnetic compatibility (EMC) Environment - Description of the environment - Radiated and non-network-frequency-related conducted phenomena (Reconfirmed 2016) |
| AS 4024.3-1998 | Safeguarding of machinery Manufacturing and testing requirements for electro-sensitive systems - Optoelectronic devices |
| AS IEC 61511.2-2004 | Functional safety - Safety instrumented systems for the process industry sector - Guidelines for the application of AS IEC 61511-1 |
| AS 2118.6-2012 | Automatic fire sprinkler systems Combined sprinkler and hydrant systems in multistorey buildings |
| AS 7240.20-2012 | Fire detection and alarm systems Aspirating smoke detectors (Reconfirmed 2023) |
| AS/NZS 61000.4.15:2012 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Flickermeter - Functional and design specifications |
| AS 60044.3-2004 | Instrument transformers Combined transformers |
| AS 4024.1906-2006 | Safety of machinery Displays, controls, actuators and signals - Indication, marking and actuation - Requirements for the location and operation of actuators |
| AS/NZS 2081:2011 | Electrical protection devices for mines and quarries (Reconfirmed 2022) |
| AS 2118.1-1999 | Automatic fire sprinkler systems General requirements |
| AS/NZS 4240.2:2009 | Remote control systems for mining equipment Operation and maintenance for underground metalliferous mining (Reconfirmed 2021) |
| AS/NZS 61000.4.1:2006 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Overview of IEC 61000-4 series |
| AS/NZS 61000.4.34:2012 | Electromagnetic compatibility (EMC) Testing and measurements techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase (Reconfirmed 2023) |
| AS 4024.1601-2006 | Safety of machinery Design of controls, interlocks and guarding - Guards - General requirements for the design and construction of fixed and movable guards |
| AS 1670.3-2004 | Fire detection, warning, control and intercom systems - System design, installation and commissioning - Fire alarm monitoring |
| AS 4024.1903-2006 | Safety of machinery Displays, controls, actuators and signals - Ergonomic requirements for the design of displays and control actuators - Control actuators |
| AS 1851-2012 | Routine service of fire protection systems and equipment |
| AS 60204.11-2006 | Safety of machinery - Electrical equipment of machines Requirements for HV equipment for voltages above 1000 V a.c. or 1500 V d.c and not exceeding 36 kV (IEC 60204-11, Ed. 1.0 (2000) MOD) |
| AS 2467-2008 | Maintenance of electrical switchgear |
| AS/NZS 61000.3.3:2012 | Electromagnetic compatibility (EMC) Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase and not subject to conditional connection |
| AS/NZS 61000.4.14:2012 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase (Reconfirmed 2023) |
| AS/NZS 4871.2:2010 | Electrical equipment for mines and quarries Distribution, control and auxiliary equipment |
| AS 4436-1996 | Guide for the selection of insulators in respect of polluted conditions |
| AS/NZS 1668.1:1998 | The use of ventilation and airconditioning in buildings Fire and smoke control in multi-compartment buildings |
| AS/NZS 7000:2010 | Overhead line design - Detailed procedures |
| AS/NZS 3800:2012 | Electrical equipment for explosive atmospheres - Repair and overhaul |
| AS/NZS 4853:2012 | Electrical hazards on metallic pipelines |
| SA/SNZ HB 146:2018 | Management of electrical cable in mines and quarries |
| AS/NZS 3010:2017 | Electrical installations - Generating sets |
| AS/NZS 3000:2018 (Unamended Hardcopy + Amendments) | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.