AS/NZS 2638.1:2011
Current
The latest, up-to-date edition.
Gate valves for waterworks purposes Metal seated (Reconfirmed 2022)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
27-05-2011
Important note : All end users must be registered with an Account prior to user licenses being assigned.Specifies requirements for PN 16 and PN 35 solid gate metal-bodied metal-seated gate valves for waterworks purposes, with a maximum operating temperature of 40 degrees Celsius.
| Committee |
WS-022
|
| DocumentType |
Standard
|
| ISBN |
978 0 7337 9870 2
|
| Pages |
31
|
| PublisherName |
Standards Australia
|
| Status |
Current
|
| Supersedes | |
| UnderRevision |
This Standard specifies requirements for PN 16 and PN 35 solid gate metal-bodied metal-seated gate valves for waterworks purposes, with a maximum operating temperature of 40°C. This Standard is applicable to the following versions:Valves of nominal sizes DN 80 to DN 900 with inside screw and non-rising spindle design, operated by a removable key, with or without a gearbox, for buried applications.Valves of nominal size DN 80 to DN 900 with inside screw and non-rising spindle design, operated by a handwheel, with or without a gearbox, for above-ground applications.Valves of nominal size DN 80 to DN 300 with outside screw and rising spindle design, operated by a handwheel, for above-ground applications where the position of the gate is required to be visible.Valves of nominal sizes DN 450 to DN 900 with an integral bypass arrangement. The design criteria of the valve and fasteners should be based on a minimum life expectancy of 50 years.
Originated in Australia as part of AS 2638-1983.
Previous edition AS 2638.1-2002.
Jointly revised and designated AS/NZS 2638.1:2011.
Reissued incorporating Amendment No. 1 (August 2017).
| AS 1683.15.1-2000 | Methods of test for elastomers International rubber hardness (Reconfirmed 2018) |
| AS 1939-1990 | Degrees of protection provided by enclosures for electrical equipment (IP Code) |
| HB 18.28-2005 | Conformity assessment - Guidance on a third-party certification system for products |
| AS/NZS 4020:2005 | Testing of products for use in contact with drinking water |
| AS 2345-2006 | Dezincification resistance of copper alloys |
| AS 1646-2007 | Elastomeric seals for waterworks purposes (Reconfirmed 2018) |
| AS/NZS 1567:1997 | Copper and copper alloys - Wrought rods, bars and sections (Reconfirmed 2021) |
| AS 2317-1998 | Collared eyebolts |
| AS 1831-2007 | Ductile cast iron (Reconfirmed 2017) |
| AS/NZS 1594:2002 | Hot-rolled steel flat products (Reconfirmed 2016) |
| AS/NZS 4158:2003 | Thermal-bonded polymeric coatings on valves and fittings for water industry purposes (Reconfirmed 2015) |
| AS 1111.1-2000 | ISO metric hexagon bolts and screws - Product grade C - Bolts |
| AS 1565-1996 | Copper and copper alloys - Ingots and castings (Reconfirmed 2020) |
| AS 2938-1993 | Gears - Spur and helical - Guide to specification and rating |
| AS 1442-2007 | Carbon steels and carbon-manganese steels - Hot rolled bars and semifinished products (Reconfirmed 2017) |
| AS/NZS 2280:2004 | Ductile iron pipes and fittings |
| AS/NZS 1252:1996 | High-strength steel bolts with associated nuts and washers for structural engineering |
| AS 2419.1:2017 | Fire hydrant installations System design, installation and commissioning |
| AS/NZS 3500.3:2018 | Plumbing and drainage Stormwater drainage |
| AS/NZS 3500.3:2015 | Plumbing and drainage Stormwater drainage |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.