• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

AS/NZS 1716:2003

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

Respiratory protective devices

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

19-06-2024

Superseded by

AS/NZS 1716:2012

Published date

01-12-2003

Preview
£132.44
Excluding VAT

Specifies minimum performance and testing criteria to be observed in the manufacture of respiratory protective devices.

Committee
SF-010
DocumentType
Standard
ISBN
0 7337 5557 7
Pages
118
PublisherName
Standards Australia
Status
Superseded
SupersededBy
Supersedes
UnderRevision

This Standard specifies requirements for respiratory protective devices (respirators) intended to provide, according to type, varying degrees of protection against atmospheres containing substances which may be harmful if breathed; also, with certain types, to provide protection against atmospheres which may be deficient in oxygen. It does not purport to give guidance on the selection, use and maintenance of respirators. This is covered in AS/NZS 1715. The Standard specifies requirements, performance and testing criteria to be observed in the manufacture of respirators. The Standard does not apply to respirators for use in aircraft, for operations under water (see AS/NZS 2299 series), or for life support respirators used for medical purposes or resuscitation (see AS 2488).

First published in Australia as AS Z18-1963.
Second edition 1968.
Revised and redesignated AS 1716-1975.Second edition 1982.
Third edition 1984.
Fourth edition 1991.
First published in New Zealand as part of NZS 1568-1961.
NZS 2209 first published 1968.
NZS 1586-1961 revised and redesignated in part as NZS 2266:1969.
NZS 2209:1968 and NZS 2266:1969 revised, amalgamated and redesignated as NZS/AS 1716-1991.
AS 1716-1991 and NZS/AS 1716-1991 jointly revised, amalgamated and designated as AS/NZS 1716:1994.Sixth edition 2003.

AS/NZS 2299.2:2002 Occupational diving operations Scientific diving
AS/NZS 1020:1995 The control of undesirable static electricity
AS 2299-1992 Occupational diving
AS/NZS 2299.3:2003 Occupational diving operations - Recreational industry diving and snorkelling operations
AS/NZS 1801:1997 Occupational protective helmets
AS 1259.1-1990 Acoustics - Sound level meters Non-integrating
AS 4067-1994 Firefighters' helmets - Specification
AS 1349-1986 Bourdon tube pressure and vacuum gauges (Reconfirmed 2018)
AS/NZS 2299.1:1999 Occupational diving operations Standard operational practice
AS 4484-1997 Industrial, medical and refrigerant compressed gas cylinder identification
AS 4484-2004
AS 2030.1-1999 The verification, filling, inspection, testing and maintenance of cylinders for storage and transport of compressed gases Cylinders for compressed gases other than acetylene
AS 2488-1995 Resuscitators intended for use with humans
AS 2473-1996 Valves for compressed gas cylinders (threaded outlet)
AS/NZS 1715:1994 Selection, use and maintenance of respiratory protective devices
AS/NZS 4067:2004 Firefighters' helmets
AS 2380.7-1987 Electrical equipment for explosive atmospheres - Explosion-protection techniques - Intrinsic safety i
MP 87(Int):2001 Australian/New Zealand Certification Scheme for explosion-protected electrical equipment (ANZEx Scheme) - Basic rules and procedures
AS 2380.2-1991 Electrical equipment for explosive atmospheres - Explosion-protection techniques Flameproof enclosure d
AS/NZS 1337:1992 Eye protectors for industrial applications

AS 2476-1981 General fumigation procedures
AS/NZS 1715:2009 Selection, use and maintenance of respiratory protective equipment (Reconfirmed 2024)
AS 2507-1998 The storage and handling of agricultural and veterinary chemicals
AS/NZS 3833:2007 The storage and handling of mixed classes of dangerous goods, in packages and intermediate bulk containers
AS 1807.6-2000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolators - Methods of test Determination of integrity of terminally mounted HEPA filter installations
AS/NZS 2311:2009 Guide to the painting of buildings
AS 1470-1986 Health and safety at work - Principles and practices
AS 2476-2008 General fumigation procedures
AS 1627.1-2003 Metal finishing - Preparation and pretreatment of surfaces Removal of oil, grease and related contamination (Reconfirmed 2017)
AS 5239-2011 Examination of ignitable liquids in fire debris (Reconfirmed 2024)
AS 4326-2008 The storage and handling of oxidizing agents
AS/NZS 4836:2011 Safe working on or near low-voltage electrical installations and equipment
AS 3961-2005 The storage and handling of liquefied natural gas
AS 3780-1994 The storage and handling of corrosive substances
AS 1807.24-2000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolators - Methods of test Determination of recovery times of cleanrooms
AS/NZS 3666.2:2011 Air-handling and water systems of buildings - Microbial control Operation and maintenance
AS 3765.1-1990 Clothing for protection against hazardous chemicals Protection against general or specific chemicals
AS 1796-2001 Certification of welders and welding supervisors (Reconfirmed 2016)
AS 1627.5-2003 Metal finishing - Preparation and pretreatment of surfaces Pickling (Reconfirmed 2017)
AS 2865-2009 Confined spaces
AS 1807.7-2000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolators - Methods of test Determination of integrity of HEPA filter installations not terminally mounted
AS/NZS 2243.8:2006 Safety in laboratories - Fume cupboards
AS 1627.6-2003 Metal finishing - Preparation and pretreatment of surfaces Chemical conversion treatment of metals (Reconfirmed 2017)
AS 1485-1983 Safety and health in workrooms of educational establishments
SAA HB 9-1994 Occupational personal protection
AS 3754-1990 Safe application of powder coatings by electrostatic spraying
AS 1940-2004 The storage and handling of flammable and combustible liquids
AS/NZS 1800:1998 Occupational protective helmets - Selection, care and use
AS 4326-1995 The storage and handling of oxidizing agents
AS/NZS 1715:1994 Selection, use and maintenance of respiratory protective devices
AS 3743-2003 Potting mixes
AS/NZS 2022:2003 Anhydrous ammonia - Storage and handling (Reconfirmed 2023)
AS 2661-1983 Vapour degreasing plant - Design, installation and operation - Safety requirements
AS 2714-2008 The storage and handling of organic peroxides (Reconfirmed 2021)
AS 3780-2008 The storage and handling of corrosive substances
AS/NZS 2312:2002 Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings
AS/NZS 2243.1:2005 Safety in laboratories Planning and operational aspects
AS/NZS 2243.1:2005 Safety in laboratories Planning and operational aspects
AS 1807.0-2000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolators - Methods of test List of methods and apparatus
AS/NZS 2865:2001 Safe working in a confined space
AS 4332-2004 The storage and handling of gases in cylinders (Reconfirmed 2016)
SAA/SNZ HB32:1995 Control of microbial growth in air-handling and water systems in buildings (Reconfirmed 2016)
AS 1807.5-2000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolators - Methods of test Determination of work zone integrity
AS 5034-2005 Installation and use of inert gases for beverage dispensing
AS 4361.1-1995 Guide to lead paint management - Industrial applications
AS/NZS 3666.2:2002 Air-handling and water systems of buildings - Microbial control Operation and maintenance
AS 2714-1993 The storage and handling of hazardous chemical materials - Class 5.2 substances (organic peroxides)
AS/NZS 2927:2001 The storage and handling of liquefied chlorine gas
AS 2601-2001 The demolition of structures
AS/NZS 1336:1997 Recommended practices for occupational eye protection
AS/NZS 2243.2:2006 Safety in laboratories Chemical aspects
AS/NZS 4081:2001 The storage and handling of liquid and liquefied polyfunctional isocyanates (Reconfirmed 2021)
AS 1807.22-2000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolators - Methods of test Determination of air barrier containment of laminar flow safety cabinets
AS 1627.4-2005 Metal finishing - Preparation and pretreatment of surfaces Abrasive blast cleaning of steel (Reconfirmed 2017)
AS/NZS 1801:1997 Occupational protective helmets

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.