AS/NZS 1680.1:2006
Current
The latest, up-to-date edition.
Interior and workplace lighting General principles and recommendations
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
21-02-2006
Provides general principles and recommendations for the lighting of building interiors to enhance the performance and comfort of those performing visual tasks. Deals with illuminating essential task details, using both artificial light and daylight, while controlling or excluding factors that might cause visual discomfort.
Committee |
LG-001
|
DocumentType |
Standard
|
ISBN |
0 7337 7264 1
|
Pages |
118
|
ProductNote |
Pending Revision indicates that as a result of the Aged Standards review process, the document needs updating. If no project proposal, meeting the quality criteria, is received within the 12 month timeframe, the document shall be withdrawn.
|
PublisherName |
Standards Australia
|
Status |
Current
|
Supersedes |
This Standard sets out general principles and recommendations for the lighting of interiors of buildings for performance and comfort. It applies primarily to interiors in which specific visual tasks are undertaken and takes into account both electric lighting and daylight. The recommendations have the object of producing a visual environment in which essential task details are made easy to see and adverse factors which may cause visual discomfort are either excluded or appropriately controlled.Recommendations for the lighting of particular interiors or activities are provided in the Standards which comprise AS(/NZS)1680.2. Refer also to AS/NZS1680.0 for basic requirements for safe movement.The Standard does not deal with lighting for the purposes of decoration, display, entertainment or sport.NOTE: Attention is drawn to the AS(/NZS)2293 series of Standards which set out requirements for the lighting necessary to alleviate panic and to permit safe evacuation of the building occupants should this be required in the event of loss of the normal lighting.
Originated in Australia as AS(E) CA501-1942.
Revised and redesignated AS 1680-1976.
Revised and redesignated in part as AS 1680.1-1990.
This edition 2006.
AS/NZS 61048:2002 | Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety requirements (IEC 61048:1991, MOD) |
AS/NZS 60079.10:2004 | Electrical apparatus for explosive gas atmospheres Classification of hazardous areas (IEC 60079-10:2002 MOD) |
AS/NZS 60079.12:2000 | Electrical apparatus for explosive gas atmospheres Classification of mixtures of gases or vapours with air according to their maximum experimental safe gaps and minimum igniting currents |
AS/NZS 3128:1998 | Approval and test specification - Portable lamp standards and brackets |
AS 2946-1991 | Suspended ceilings, recessed luminaires and air diffusers - Interface requirements for physical compatibility |
AS 2325-1993 | Tungsten filament lamps for general service - Performance requirements |
AS/NZS 60079.26 (INT):2005 | Electrical apparatus for explosive gas atmospheres Construction, test and marking of Group II Zone 0 electrical apparatus |
AS/NZS 60923:1998 | Auxiliaries for lamps - Ballasts for discharge lamps (excluding tubular fluorescent lamps) - Performance requirements (Reconfirmed 2013) |
AS/NZS 3000:2000 | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
AS/NZS 60079.2:2002 | Electrical apparatus for explosive gas atmospheres Pressurized enclosures 'p' |
AS/NZS 60598.2.8:2002 | Luminaires Particular requirements - Handlamps (IEC 60598-2-8:2001, MOD) |
AS 3117-1994 | Approval and test specification - Bayonet lampholders |
AS 1318-1985 | Use of colour for the marking of physical hazards and the identification of certain equipment in industry (known as the SAA Industrial Safety Colour Code) |
AS/NZS 2293.2:1995 | Emergency escape lighting and exit signs for buildings Inspection and maintenance |
AS 2293.1-2005 | Emergency escape lighting and exit signs for buildings System design, installation and operation |
AS/NZS 3827.2:1998 | Lighting system performance - Accuracies and tolerances - Compliance requirements |
AS 4004-2006 | Lighting booths for visual assessment of colour and colour matching |
AS/NZS 60079.25:2004 | Electrical apparatus for explosive gas atmospheres Intrinsically safe systems |
AS 3158-2004 | Electric cables - Glass fibre insulated - For working voltages up to and including 0.6/1 (1.2) kV (Reconfirmed 2016) |
AS/NZS 60922:1998 | Auxiliaries for lamps - Ballasts for discharge lamps (excluding tubular fluorescent lamps) - General and safety requirements |
AS/NZS 4782.1:2004 | Double-capped fluorescent lamps - Performance specifications General (IEC 60081:2000, MOD) (Reconfirmed 2016) |
AS/NZS 3117:2007 | Approval and test specification - Bayonet lampholders |
AS/NZS 60079.1:2005 | Electrical apparatus for explosive gas atmospheres Flameproof enclosures 'd' |
AS/NZS 4251.2:1999 | Electromagnetic compatibility (EMC) - Generic emission standard Industrial environments |
AS/NZS 60079.20:2000 | Electrical apparatus for explosive gas atmospheres Data for flammable gases and vapours, relating to the use of electrical apparatus |
AS/NZS CISPR 15:2006 | Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment |
AS/NZS 60079.18:2005 | Electrical apparatus for explosive gas atmospheres Construction, test and marking of type of protection encapsulation m electrical apparatus |
AS 2700-1996 | Colour Standards for general purposes - Swatches |
AS/NZS 60079.5:2000 | Electrical apparatus for explosive gas atmospheres Powder filling 'q' |
AS/NZS 60598.2.8:1998 | Luminaires Particular requirements - Handlamps |
AS/NZS 1680.4:2001 | Interior lighting - Maintenance of electric lighting systems |
AS 2643-1991 | Fluorescent lamp ballasts of reactive type - Performance requirements |
AS 1345-1995 | Identification of the contents of pipes, conduits and ducts (Reconfirmed 2018) |
AS/NZS 1680.2.5:1997 | Interior lighting - Hospital and medical tasks |
AS 1852.845-1989 | International electrotechnical vocabulary - Lighting |
AS/NZS 60079.15:2006 | Electrical apparatus for explosive gas atmospheres Construction, test and marking of type of protection, n electrical apparatus |
AS/NZS CISPR 14.1:2003 | Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus Emission |
AS/NZS 60079.7:2002 | |
AS/NZS CISPR 15:2002 | Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment (CISPR 15:2000, MOD) |
AS/NZS 60079.1.1:2002 | Electrical apparatus for explosive gas atmospheres Flameproof enclosures 'd' - Method of test for ascertainment of maximum experimental safe gap |
AS/NZS 60079.4:2000 | Electrical apparatus for explosive gas atmospheres Method of test for ignition temperature |
AS/NZS 61050:1998 | Transformers for tubular discharge lamps having a no-load output voltage exceeding 1000 V (generally called neon-transformers) - General and safety requirements (Reconfirmed 2013) (Reconfirmed 2024) |
AS 3665-1989 | Simplified definitions of lighting terms and quantities |
AS/NZS 3100:2002 | Approval and test specification - General requirements for electrical equipment |
AS/NZS 3827.1:1998 | Lighting system performance - Accuracies and tolerances Overview and general recommendations |
AS/NZS 4251.1:1999 | Electromagnetic compatibility (EMC) - Generic emission standard Residential, commercial and light industry |
AS/NZS 60079.27(INT):2006 | Electrical apparatus for explosive gas atmospheres Fieldbus intrinsically safe concept (FISCO) and fieldbus non-incendive concept (FNICO) |
AS/NZS 60079.0:2005 | Electrical apparatus for explosive gas atmospheres General requirements |
AS 4004-1992 | Lighting booths for visual assessment of colour and colour matching |
AS/NZS 60079.6:2000 | Electrical apparatus for explosive gas atmospheres Oil-immersion 'o' |
AS 1680.3-1991 | Interior lighting - Measurement, calculation and presentation of photometric data |
AS 1680.2.2-1994 | Interior lighting Office and screen-based tasks |
AS 3140-1994 | Approval and test specification - Edison-type screw lampholders |
AS/NZS 60598.1:2003 | Luminaires General requirements and tests (IEC 60598-1:2003, MOD) |
AS/NZS 2633:1996 | Guide to the specification of colours (Reconfirmed 2013) |
AS/NZS 60079.11:2000 | Electrical apparatus for explosive gas atmospheres Intrinsic safety 'i' |
AS 60529-2004 | Degrees of protection provided by enclosures (IP Code) (Reconfirmed 2018) |
AS/NZS 4066:1992 | Eye protectors for racquet sports |
AS 1940:2017 | The storage and handling of flammable and combustible liquids |
AS/NZS 2311:2009 | Guide to the painting of buildings |
AS/NZS 2982:2010 | Laboratory design and construction |
AS 1680.3-1991 | Interior lighting - Measurement, calculation and presentation of photometric data |
AS 3011.2:2019 | Electrical installations - Secondary batteries installed in buildings Sealed cells |
AS 3011.2-1992 | Electrical installations - Secondary batteries installed in buildings Sealed cells |
AS/NZS 1337.1:2010 | Personal eye protection Eye and face protectors for occupational applications |
AS 3892-2001 | Pressure equipment - Installation (Reconfirmed 2016) |
AS 4299-1995 | Adaptable housing |
AS 4326-2008 | The storage and handling of oxidizing agents |
AS 3558.11-1999 | Methods of testing plastics and composite materials sanitary plumbing fixtures Determination of impact resistance of baths for ablutionary purposes |
AS 3961-2005 | The storage and handling of liquefied natural gas |
AS 2834-1995 | Computer accommodation |
AS/NZS 1680.2.4:1997 | Interior lighting Industrial tasks and processes |
AS/NZS 1680.0:2009 | Interior lighting Safe movement (Reconfirmed 2020) |
AS 2708-2001 | Keyboarding speed tests (formerly known as - Typing speed tests) |
AS 4004-2006 | Lighting booths for visual assessment of colour and colour matching |
AS 2676.2-1992 | Guide to the installation, maintenance, testing and replacement of secondary batteries in buildings - Sealed cells |
AS 2865-2009 | Confined spaces |
AS 5007-2007 | Powered doors for pedestrian access and egress (Reconfirmed 2018) |
AS 1680.2.1-1993 | Interior lighting Circulation spaces and other general areas |
AS/NZS 1680.2.1:2008 | Interior and workplace lighting Specific applications - Circulation spaces and other general areas |
AS/NZS 1338.1:1992 | Filters for eye protectors Filters for protection against radiation generated in welding and allied operations |
AS 3558.17-1999 | Methods of testing plastics and composite materials sanitary plumbing fixtures Determination of impact resistance of shower bases and shower modules |
AS 1680.2.3-1994 | Interior lighting Educational and training facilities |
AS 3011.1-1992 | Electrical installations - Secondary batteries installed in buildings - Vented cells Vented cells |
SAA HB 9-1994 | Occupational personal protection |
AS/NZS 1338.1:2012 | Filters for eye protectors Filters for protection against radiation generated in welding and allied operations |
AS 1940-2004 | The storage and handling of flammable and combustible liquids |
AS 3769-1990 | Automatic teller machines - User access |
AS 3558.7-1999 | Methods of testing plastics and composite materials sanitary plumbing fixtures Determination of impact resistance of laundry troughs (Reconfirmed 2016) |
AS/NZS 1680.2.3:2008 | Interior and workplace lighting Specific applications - Educational and training facilities |
AS 4024.1-1996 | Safeguarding of machinery General principles |
AS/NZS 1680.4:2017 | Interior and workplace lighting Maintenance of electric lighting systems |
AS 3961:2017 | The storage and handling of liquefied natural gas |
AS/NZS 1680.3:2017 | Interior and workplace lighting Measurement, calculation and presentation of photometric data |
AS 4467-1998 | Hygienic production of crocodile meat for human consumption |
AS 1680.2.2-1994 | Interior lighting Office and screen-based tasks |
AS 5124:2017 | Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages (EN 14010:2003, MOD) |
AS 2067-2008 | Substations and high voltage installations exceeding 1 kV a.c. |
AS 3780-2008 | The storage and handling of corrosive substances |
AS/NZS 1680.2.5:2018 | Interior and workplace lighting Hospital and medical tasks |
AS/NZS 2865:2001 | Safe working in a confined space |
AS/NZS 2293.2:1995 | Emergency escape lighting and exit signs for buildings Inspection and maintenance |
AS/NZS 2243.5:2004 | Safety in laboratories Non-ionizing radiations - Electromagnetic, sound and ultrasound |
AS 2293.1-2005 | Emergency escape lighting and exit signs for buildings System design, installation and operation |
AS/NZS 2589:2007 | Gypsum linings - Application and finishing |
AS 1428.2-1992 | Design for access and mobility Enhanced and additional requirements - Buildings and facilities (Reconfirmed 2015) |
AS/NZS 5139:2019 | Electrical installations - Safety of battery systems for use with power conversion equipment |
AS/NZS 5026:2012 | The storage and handling of Class 4 dangerous goods (Reconfirmed 2024) |
HB 59-1994 | Ergonomics - The human factor, A practical approach to work systems design (Reconfirmed 2016) |
AS 3558.15-1999 | Methods of testing plastics and composite materials sanitary plumbing fixtures Determination of impact resistance of washbasins |
AS 3011.1:2019 | Electrical installations - Secondary batteries installed in buildings Vented cells |
AS 1428.5-2010 | Design for access and mobility Communication for people who are deaf or hearing impaired (Reconfirmed 2016) |
AS/NZS 1680.2.4:2017 | Interior and workplace lighting Industrial tasks and processes |
AS/NZS 2589:2017 | Gypsum linings - Application and finishing |
AS/NZS 1337:1992 | Eye protectors for industrial applications |
AS/NZS 2927:2001 | The storage and handling of liquefied chlorine gas |
AS 3558.19-1999 | Methods of testing plastics and composite materials sanitary plumbing fixtures Determination of impact resistance of sinks (Reconfirmed 2016) |
AS 1371:2016 | Toilet seats and fittings |
AS 3558.6-1999 | Methods of testing plastics and composite materials sanitary plumbing fixtures Visual examination of surface finish for defects (Reconfirmed 2016) |
AS 2676.1-1992 | Guide to the installation, maintenance, testing and replacement of secondary batteries in buildings - Vented cells |
AS 1375-2013 | Industrial fuel-fired appliances |
AS/NZS 1336:1997 | Recommended practices for occupational eye protection |
AS 3558.2-1999 | Methods of testing plastics and composite materials sanitary plumbing fixtures Determination of chemical and stain resistance |
AS 2560.1-2002 | Sports lighting General principles |
AS/NZS 2311:2017 | Guide to the Painting of Buildings |
AS/NZS 2604:1998 | Sunscreen products - Evaluation and classification |
AS/NZS 2293.1:2018 | Emergency lighting and exit signs for buildings System design, installation and operation |
AS/NZS 1680.2.2:2008 | Interior and workplace lighting Specific applications - Office and screen-based tasks |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.