AS/NZS 1580.101.5:1999
Current
The latest, up-to-date edition.
Paints and related materials - Methods of test Conditions of test - Temperature and humidity control (Reconfirmed 2013)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
05-05-1999
This Standard sets out requirements for the conditioning and testing of paints and painted panels, wherein temperature and humidity are controlled.
Committee |
CH-003
|
DocumentType |
Standard
|
ISBN |
0 7337 2652 6
|
Pages |
1
|
ProductNote | |
PublisherName |
Standards Australia
|
Status |
Current
|
Supersedes |
This standard sets out requirements for the normal conditioning and testing of paints and painted panels, where temperature and humidity are controlled.
Originated in Australia as AS K41.101.5-1971.
Final Australian edition AS 1580.10.5-1986.
Jointly revised and designated as AS/NZS 1580.101.5:1999.
AS 3730.29-2006 | Guide to the properties of paints for buildings Solvent-borne - Exterior/interior - Paving paint (Reconfirmed 2016) |
AS 1580.481.5-2004 | |
AS 3730.21-2006 | Guide to the properties of paints for buildings Primer - Solvent-borne - For ferrous metallic surfaces |
AS 3750.18-2002 | Paints for steel structures Moisture cure urethane (single-pack) systems |
AS 1580.454.1-2002 | Paints and related materials - Methods of test Resistance to mineral oil and other organic liquids |
AS/NZS 3750.8:1994 | Paints for steel structures Vinyl paints - Primer, high-build and gloss (Reconfirmed 2013) |
AS 3730.3-2006 | Guide to the properties of paints for buildings Latex - Interior - Low gloss (Reconfirmed 2016) |
AS/NZS 3750.9:1994 | Paints for steel structures - Organic zinc-rich primer |
AS 3894.1-2002 | Site testing of protective coatings Non-conductive coatings - Continuity testing - High voltage (brush) method (Reconfirmed 2013) |
AS 3730.2-2006 | Guide to the properties of paints for buildings Latex - Interior - Semi-gloss (Reconfirmed 2016) |
AS/NZS 1580.213.1:1997 | Paints and related materials - Methods of test Relative dry hiding power (Reconfirmed 2013) |
AS 4025.2-1993 | Paints for equipment including ships Solvent-borne - Interior and exterior - Undercoat |
AS 3730.9-2006 | Guide to the properties of paints for buildings Latex - Exterior - Semi-gloss |
AS 3730.5-2006 | Guide to the properties of paints forbuildings Solvent-borne - Interior - Semi-gloss (Reconfirmed 2016) |
AS 3730.7-2006 | Guide to the properties of paints for buildings Latex - Exterior - Flat |
AS 3730.11-1991 | Guide to the properties of paints for buildings Solvent-borne - Interior - Full gloss enamel |
AS 3750.2-1994 | Paints for steel structures - Ultra high-build paint |
AS 1580.409.1-2002 | Paints and related materials - Methods of test Resistance to mudcracking |
AS 1580.213.2-2004 | Paints and related materials - Methods of test Dry hiding power - Contrast ratio |
AS/NZS 3750.7:2009 | Paints for steel structures Aluminium paint (Reconfirmed 2021) |
AS 3730.15-2006 | Guide to the properties of paints for buildings Primer - Latex - For metallic zinc surfaces |
AS 3730.13-2006 | Guide to the properties of paints for buildings Primer - Wood - Solvent-borne - Interior/exterior (Reconfirmed 2016) |
AS/NZS 3750.6:2009 | Paints for steel structures Full gloss polyurethane (two-pack) (Reconfirmed 2020) |
AS 3730.28-2006 | Guide to the properties of paints for buildings Wood stain - Solvent-borne - Exterior |
AS/NZS 1580.401.1:1999 | Paints and related materials - Methods of test Surface dry condition (Reconfirmed 2013) |
AS 4025.3-1993 | Paints for equipment including ships Solvent-borne - Interior and exterior - Semi-gloss enamel |
AS 2331.1.1-2001 | Methods of test for metallic and related coatings Local thickness tests - Micrographic examination of cross-sections |
AS 3730.26-1993 | Guide to the properties of paints for buildings Floor varnish - Moisture cured |
AS/NZS 3750.11:1996 | Paints for steel structures - Chlorinated rubber - High-build and gloss |
AS 3730.25-2006 | Guide to the properties of paints for buildings Clear finish - Solvent-borne - Interior (Reconfirmed 2016) |
AS 1580.456.1-2004 | |
AS/NZS 3750.9:2009 | Paints for steel structures Organic zinc-rich primer (Reconfirmed 2019) |
AS/NZS 3750.4:1994 | Paints for steel structures Bitumen paint (Reconfirmed 2013) |
AS 3730.6-2006 | Guide to the properties of paints for buildings Solvent-borne - Interior/exterior - Full gloss enamel (Reconfirmed 2016) |
AS 3730.16-2006 | Guide to the properties of paints for buildings Latex - Self-priming timber finish - Exterior |
AS/NZS 3750.3:2008 | Paints for steel structures Heat resisting - Exterior (Reconfirmed 2020) |
AS/NZS 1580.107.2:1995 | Paints and related materials - Methods of test Determination of wet film thickness from wet film mass (Reconfirmed 2013) |
AS/NZS 1580.403.1:1999 | Paints and related materials - Methods of test Scratch resistance (Reconfirmed 2013) |
AS 3730.17-2006 | Guide to the properties of paints for buildings Primer - Wood - Latex - Interior/exterior (Reconfirmed 2016) |
AS/NZS 3750.3:1994 | Paints for steel structures - Heat resisting - Exterior |
AS 3730.14-2006 | Guide to the properties of paints for buildings Undercoat - Solvent-borne - Interior/exterior |
AS 1580.453.1-2003 | Paints and related materials - Methods of test Resistance to solvent immersion |
AS 3894.2-2002 | Site testing of protective coatings Non-conductive coatings - Continuity testing - Wet sponge method |
AS 1580.214.3-2003 | Paints and related materials - Methods of test Viscosity - Cone-and-plate |
AS 4025.1-1992 | Paints for equipment including ships Solvent-borne - Interior and exterior - Full gloss enamel |
AS 3750.10-2008 | Paints for steel structures Full gloss epoxy (two-pack) (Reconfirmed 2019) |
AS 3730.18-2006 | Guide to the properties of paints for buildings Undercoat/sealer - Latex - Interior/exterior |
AS/NZS 3750.12:1996 | Paints for steel structures Alkyd/micaceous iron oxide (Reconfirmed 2013) |
AS 1580.408.2-2004 | Paints and related materials - Methods of test Adhesion - Knife test (Reconfirmed 2019) |
AS 3730.12-2006 | Guide to the properties of paints for buildings Latex - Interior - Gloss |
AS/NZS 3750.1:2008 | Paints for steel structures Epoxy mastic (two-pack) - For rusted steel (Reconfirmed 2020) |
AS 1580.402.1-2003 | Paints and related materials - Methods of test Bend test |
AS 3730.1-2006 | Guide to the properties of paints for buildings Latex - Interior - Flat (Reconfirmed 2016) |
AS 3730.22-2006 | Guide to the properties of paints for buildings Concrete and masonry sealer - Solvent-borne - Interior/exterior |
AS/NZS 1580.107.8:1995 | Paints and related materials - Methods of test Application of paint at a nominated spreading rate by determination of wet film mass (brush application) (Reconfirmed 2013) |
AS/NZS 3750.7:1994 | Paints for steel structures - Aluminium paint |
AS 3730.27-2006 | Guide to the properties of paints for buildings Clear coatings for interior timber floors |
AS/NZS 3750.20:2008 | Paints for steel structures Anticorrosive metal primer - Solvent-borne - Lead and chromate free (Reconfirmed 2020) |
AS 3715-2002 | Metal finishing - Thermoset powder coatings for architectural applications of aluminium and aluminium alloys |
AS 3750.1-1994 | Paints for steel structures - Epoxy mastic (two-pack) - For rusted steel |
AS/NZS 1580.104.1:2000 | Paints and related materials - Methods of test Recommended materials for test panels (Reconfirmed 2013) |
AS/NZS 3750.21:2008 | Paints for steel structures Undercoat - Solvent-borne (Reconfirmed 2021) |
AS 3730.10-2006 | Guide to the properties of paints for buildings Latex - Exterior - Gloss (Reconfirmed 2016) |
AS 3730.8-2006 | Guide to the properties of paints for buildings Latex - Exterior - Low-gloss (Reconfirmed 2016) |
AS/NZS 3750.5:1994 | Paints for steel structures - Acrylic full gloss (two-pack) |
AS/NZS 3750.10:1994 | Paints for steel structures Full gloss epoxy (two-pack) |
AS/NZS 3750.2:2008 | Paints for steel structures Ultra high-build paint (Reconfirmed 2020) |
AS/NZS 3750.19:2008 | Paints for steel structures Metal primer - General purpose (Reconfirmed 2020) |
AS 4089-1993 | Priming paint for steel - Single component - General purpose |
AS 4025.4-1994 | Paints for equipment including ships Solvent-borne - Lead and chromate free - Anticorrosive metal primer |
AS 1580.406.1-2004 | Paints and related materials - Methods of test Resistance to impact - Falling weight test (Gardner-type tester) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.