AS 5039-2008
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Security screen doors and security window grilles
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
28-11-2023
English
19-05-2008
Sets out the requirements for the performance of hinged and sliding security screen doors and security window grilles used primarily in residential situations.
Committee |
CS-023
|
DevelopmentNote |
Standard has been given Pending revision status.
|
DocumentType |
Standard
|
ISBN |
0 7337 8644 8
|
Pages |
50
|
ProductNote |
Pending Revision indicates that as a result of the Aged Standards review process, the document needs updating. If no project proposal, meeting the quality criteria, is received within the 12 month timeframe, the document shall be withdrawn.
|
PublisherName |
Standards Australia
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
This Standard specifies requirements for the performance of all types of hinged and sliding security screen doors and hinged, sliding, removable and fixed security window grilles used primarily in residential situations. This Standard is concerned mainly with resistance to forced entry and does not address the important issues relating to egress in the case of emergency. The Standard covers movable and removable security window grilles that can be used in such instances.NOTES:1 Alternative methods for determining compliance with this Standard are given in Appendix A.2 The effectiveness of security screen doors or window grilles is dependent on the strength of the screen and grille and the adequacy of its installation in its surrounds. For information on installation, see the Foreword and AS 5040. 3 Double-leaf doors may be constructed and tested in accordance with this Standard, and reported accordingly in consultation with the testing authority.
Originated as Part of AS 2803-1985, AS/NZS 2803.2:1995, AS/NZS 4483.1:1997, AS/ZS 4483.2:1999 and AS/NZS 4604:1999.
Previous editions AS/NZS 2803.1:1994, AS/NZS 2803.2:1995, AS/NZS 4483.1:1999, AS/NZS 4483.2:1999 and AS/NZS 4604:1999.
AS/NZS 2803.1:1994, AS/NZS 2803.2:1995, AS/NZS 4483.1:1999, AS/NZS 4483.2:1999 and AS/NZS 4604:1999 revised, amalgamated and redesignated in part as AS 5039-2003.
Second edition 2008.
AS/NZS 4680:2006 | Hot-dip galvanized (zinc) coatings on fabricated ferrous articles (Reconfirmed 2017) |
AS 2331.3.11-2004 | Methods of test for metallic and related coatings Corrosion and related property tests - Chemical residue tests |
HB 18.28-2005 | Conformity assessment - Guidance on a third-party certification system for products |
AS/NZS 4792:2006 | Hot-dip galvanized (zinc) coatings on ferrous hollow sections, applied by a continuous or a specialized process (Reconfirmed 2017) |
AS 3715-2002 | Metal finishing - Thermoset powder coatings for architectural applications of aluminium and aluminium alloys |
AS 1199.1-2003 | Sampling procedures for inspection by attributes Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Reconfirmed 2016) |
AS 3555.1-2003 | Building elements Testing and rating for intruder resistance - Intruder-resistant panels |
AS 1397-2001 | Steel sheet and strip - Hot-dipped zinc-coated or aluminium/zinc-coated |
AS/NZS ISO 9004:2000 | Quality management systems - Guidelines for performance improvements |
AS/NZS 3750.9:1994 | Paints for steel structures - Organic zinc-rich primer |
AS 1231-2000 | Aluminium and aluminium alloys - Anodic oxidation coatings |
AS/NZS ISO 17020:2000 | General criteria for the operation of various types of bodies performing inspection |
AS 2331.3.13-2006 | Methods of test for metallic and related coatings Corrosion and related property tests - Wet (salt fog)/dry/humidity (Reconfirmed 2017) |
AS ISO/IEC 17025-2005 | General requirements for the competence of testing and calibration laboratories (Reconfirmed 2016) |
AS 1789-2003 | Electroplated zinc (electrogalvanized) coatings on ferrous articles (batch process) (Reconfirmed 2017) |
AS/NZS 4354:1995 | Medical electrical equipment - Radionuclide calibrators - Particular methods for describing performance (Reconfirmed 2022) |
AS 5041-2003 | Methods of test - Security screen doors and window grilles (Reconfirmed 2016) |
AS/NZS ISO 9001:2000 | Quality management systems - Requirements |
AS 2331.3.10-2001 | Methods of test for metallic and related coatings Corrosion and related property tests - Cracks and pores in chromium |
AS 2331.3.12-2006 | Methods of test for metallic and related coatings Corrosion and related property tests - Cyclic salt fog/UV exposure of organically coated metal |
AS 1199.0-2003 | Sampling procedures for inspection by attributes Introduction to the ISO 2859 attribute sampling system (Reconfirmed 2016) |
AS 4145.2-2008 | Locksets and hardware for doors and windows Mechanical locksets for doors and windows in buildings |
AS 2331.3.1-2001 | Methods of test for metallic and related coatings Corrosion and related property tests - Neutral salt spray test (NSS test) (Reconfirmed 2017) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.