AS 4738.1-2007
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Metal castings Ferrous sand moulded
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
30-06-2017
12-09-2007
Specifies the general technical delivery requirements for iron and steel castings including the requirements for the preparation of samples and test pieces.
Committee |
MT-001
|
DocumentType |
Standard
|
ISBN |
0 7337 8340 6
|
Pages |
43
|
ProductNote |
Withdrawn 28-06-2017.
|
PublisherName |
Standards Australia
|
Status |
Withdrawn
|
Supersedes |
This Standard specifies the general technical delivery requirements for iron and steel castings, including the requirements for the preparation of samples and test pieces.When material or product Standards differ from this general delivery specification, the material or product Standard applies. In special cases, variations from these conditions may be agreed upon at the time of order. Appendix A lists the supplementary requirements that may be applied to ferrous castings.Appendix E lists the application for iron and steel castings.For guidance and a list of equivalent Standards on the designation for cast irons and pig irons refer to Appendix H.
Standards | Relationship |
ISO/TR 15931:2004 | Identical |
Originated as AS 4738.1-2004.
Second edition 2007.
AS 1654.1-1995 | ISO system of limits and fits - Bases of tolerances, deviations and fits |
AS/NZS ISO 9004:2000 | Quality management systems - Guidelines for performance improvements |
AS 2027-2007 | Abrasive-resistant cast irons |
AS/NZS ISO 9001:2000 | Quality management systems - Requirements |
AS 2574-2000 | Non-destructive testing - Ultrasonic testing of ferritic steel castings (Reconfirmed 2022) |
AS/NZS 1050.18:1994 | Methods for the analysis of iron and steel Determination of phosphorus - Spectrophotometric method (Reconfirmed 2016) |
AS 1210 SUPP 2-1999 | Pressure vessels - Cold-stretched austenitic stainless steel vessels (Supplement to AS 1210-1997) |
AS 2074-2003 | Cast steels |
AS 1831-2007 | Ductile cast iron (Reconfirmed 2017) |
HB 18.28-2005 | Conformity assessment - Guidance on a third-party certification system for products |
AS 1832-2007 | Malleable cast iron (Reconfirmed 2017) |
AS 1210 SUPP 1-1990 | |
AS 1830-2007 | Grey cast iron (Reconfirmed 2017) |
AS 1171-1998 | Non-destructive testing - Magnetic particle testing of ferromagnetic products, components and structures (Reconfirmed 2022) |
AS 4314-2005 | Founding - Patterns, pattern equipment and coreboxes for the production of sand moulds and sand cores |
AS/NZS 1050.16:1994 | Methods for the analysis of iron and steel Determination of sulfur content - Infrared absorption method after combustion in an induction furnace (Reconfirmed 2017) |
AS 5052-2007 | Compacted (vermicular) graphite cast irons - Classification |
AS 3507.2-2006 | Non-destructive testing Radiographic determination of quality of ferrous castings |
AS/NZS 1050.1:1996 | Methods for the analysis of iron and steel Sampling iron and steel for chemical analysis |
AS/NZS 1050.14:1994 | Methods for the analysis of iron and steel Determination of manganese in iron and steel - Titrimetric method |
AS 1654.2-1995 | ISO system of limits and fits - Tables of standard tolerance grades and limit deviations for holes and shafts |
AS 1833-2002 | Austenitic cast iron |
AS 5054-2007 | Ausferritic spheroidal graphite cast irons - Classification |
AS 1199.1-2003 | Sampling procedures for inspection by attributes Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Reconfirmed 2016) |
AS 1199.0-2003 | Sampling procedures for inspection by attributes Introduction to the ISO 2859 attribute sampling system (Reconfirmed 2016) |
AS 1100.201-1992 | Technical drawing Mechanical engineering drawing (Reconfirmed 2014) |
AS 1988.1-2006 | Welding of ferrous castings - Steel castings |
AS 2062-1997 | Non-destructive testing - Penetrant testing of products and components |
AS 3978-2003 | Non-destructive testing - Visual inspection of metal products and components (Reconfirmed 2022) |
AS 3507.1-2003 | Non-destructive testing Guide to radiography for ferrous castings |
AS 1830-2007 | Grey cast iron (Reconfirmed 2017) |
AS 2074-2003 | Cast steels |
AS 1831-2007 | Ductile cast iron (Reconfirmed 2017) |
AS 2027-2007 | Abrasive-resistant cast irons |
AS 1832-2007 | Malleable cast iron (Reconfirmed 2017) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.