AS 4181-2013
Current
The latest, up-to-date edition.
Repair and off-take clamps for water industry purposes (Reconfirmed 2023)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
08-04-2013
Important note : All end users must be registered with an Account prior to user licenses being assigned.Specifies requirements for the design, materials and in-service performance of TypeR and TypeF mechanical clamps for water industry purposes.
| Committee |
WS-016
|
| DocumentType |
Standard
|
| ISBN |
978 1 74342 388 2
|
| Pages |
26
|
| PublisherName |
Standards Australia
|
| Status |
Current
|
| Supersedes |
This Standard specifies the requirements for the design, materials and in-service performance of Type R and Type F mechanical clamps for water industry purposes.In this Standard—(a) Type R clamps are designated for applications involving rigid pipes, typically ductile iron (DI), grey cast iron (CI), steel (S), asbestos cement (AC), copper (CU) and reinforced concrete (RC); and(b) Type F clamps are designated for applications involving flexible pipes, typically oriented polyvinylchloride (PVC-O), modified polyvinylchloride (PVC-M), unplasticized polyvinylchloride (PVC-U) and glass reinforced thermoplastics (GRP).Clamps complying with this Standard are intended for use in off-take connections on pressure pipelines of the sizes up to and including DN 600, and repair applications on pressure pipelines of all sizes, with a maximum operating temperature of 40ºC.This Standard does not cover the following:(i) The use of repair or off-take clamps on polyethylene (PE) pipelines.(ii) Tapping bands/saddles.NOTE: Tapping bands and saddles area covered in AS/NZS 4793 or AS/NZS 4129.
Originated as AS 4181-1994.
Previous edition 1999.
Third edition 2013.
| AS/NZS 4020:2005 | Testing of products for use in contact with drinking water |
| AS 2205.10.1-2003 | Methods for destructive testing of welds in metal Corrosion test for welded austenitic stainless steel |
| AS/NZS 1462.8:2008 | Methods of test for plastics pipes and fittings Method of testing the leaktightness of assemblies (Reconfirmed 2017) |
| AS 1199.1-2003 | Sampling procedures for inspection by attributes Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Reconfirmed 2016) |
| AS/NZS 1594:2002 | Hot-rolled steel flat products (Reconfirmed 2016) |
| AS/NZS 4793:2009 | Mechanical tapping bands for waterworks purposes |
| AS 1112.1-2000 | ISO metric hexagon nuts Style 1 - Product grades A and B |
| AS 2074-2003 | Cast steels |
| AS/NZS 1462.6:2008 | Methods of test for plastics pipes and fittings Thermoplastics pipes, fittings and assemblies for the transport of fluids under pressure - Resistance to internal pressure (Reconfirmed 2017) |
| AS/NZS 4129:2008 | Fittings for polyethylene (PE) pipes for pressure applications |
| AS/NZS 4158:2003 | Thermal-bonded polymeric coatings on valves and fittings for water industry purposes (Reconfirmed 2015) |
| AS 1646-2007 | Elastomeric seals for waterworks purposes (Reconfirmed 2018) |
| AS 3571.1-2009 | Plastics piping systems - Glass reinforced thermoplastics (GRP) systems based on unsaturated polyester (UP) resin Pressure and non-pressure drainage and sewerage (ISO 10467:2004, MOD) |
| AS 4087:2011 | Metallic flanges for waterworks purposes |
| AS/NZS 1554.6:2012 | Structural steel welding Welding stainless steels for structural purposes |
| AS 3571.2-2009 | Plastics piping systems - Glass reinforced thermoplastics (GRP) systems based on unsaturated polyester (UP) resin Pressure and non-pressure water supply (ISO 10639:2004, MOD) |
| AS/NZS 3678:2011 | Structural steel - Hot-rolled plates, floorplates and slabs |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.