AS 4032.4:2014
Current
The latest, up-to-date edition.
Water supply - Valves for the control of heated water supply temperatures Thermostatically controlled taps for the control of heated water supply temperatures
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
11-06-2014
Important note : All end users must be registered with an Account prior to user licenses being assigned.This Standard specifies requirements for the design, construction, testing performance and means of compliance for thermostatic mixing taps- (a)for use with heated water at a supply temperature not exceeding 90°C; (b)for use with hot and cold water with working pressures not exceeding 1400kPa; and (c)of nominal sizes not larger than DN 20.
| Committee |
WS-026
|
| DocumentType |
Standard
|
| ISBN |
978 1 74342 728 6
|
| Pages |
57
|
| PublisherName |
Standards Australia
|
| Status |
Current
|
| Supersedes |
This Standard specifies requirements for the design, construction, testing performance and means of compliance for thermostatic mixing taps—(a) for use with heated water at a supply temperature not exceeding 90°C; (b) for use with hot and cold water with working pressures not exceeding 1400 kPa; and(c) of nominal sizes not larger than DN 20.When used for ablutionary purposes, thermostatic mixing taps complying with this Standard provide the user with reasonable protection against scalding or excessive temperature fluctuations due to variations of pressures and temperatures of the hot and cold water supplies, including thermal shut-off.NOTES: 1 Diagrams in this Standard are typical.2 This Standard includes a method for assessing the flow performance of a thermostatic mixing tap but at the time of its publication, the Standard is not referenced in AS/NZS 6400.
First published as AS 4032.4:2014.
| AS 1565-1996 | Copper and copper alloys - Ingots and castings (Reconfirmed 2020) |
| AS 2136-1977 | Method for detecting the susceptibility of copper and its alloys to stress corrosion cracking using the mercurous nitrate test (Reconfirmed 2018) |
| HB 18.28-2005 | Conformity assessment - Guidance on a third-party certification system for products |
| AS 4032.3-2004 | Water supply - Valves for the control of heated water supply temperatures Requirements for field-testing, maintenance or replacement of thermostatic mixing valves, tempering valves and end-of-line temperature control devices |
| AS 3558.5-1999 | Methods of testing plastics and composite materials sanitary plumbing fixtures Determination of degradation by ultraviolet light (Reconfirmed 2016) |
| AS 1769-1975 | Welded stainless steel tubes for plumbing applications (Reconfirmed 2018) |
| AS 4032.1-2005 | Water supply - Valves for the control of heated water supply temperatures Thermostatic mixing valves - Materials design and performance requirements |
| AS 1834.1-1991 | Material for soldering Solder alloys (Reconfirmed 2018) |
| AS/NZS 4020:2005 | Testing of products for use in contact with drinking water |
| AS 2345-2006 | Dezincification resistance of copper alloys |
| AS 1881-1986 | ZINC ALLOYS - CASTING INGOTS AND CASTINGS - QUALITY REQUIREMENTS (Reconfirmed 2018) |
| AS/NZS 3500.0:2003 | Plumbing and drainage Glossary of terms |
| AS 2738-2000 | Copper and copper alloys - Compositions and designations of refinery products, wrought products, ingots and castings (Reconfirmed 2018) |
| AS 1199.1-2003 | Sampling procedures for inspection by attributes Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Reconfirmed 2016) |
| AS 1472-2003 | Carbon steel spring wire for mechanical springs |
| AS/NZS 3000:2007 | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
| AS/NZS 1167.1:2005 | Welding and brazing - Filler metals Filler metal for brazing and braze welding |
| AS/NZS 1567:1997 | Copper and copper alloys - Wrought rods, bars and sections (Reconfirmed 2021) |
| AS/NZS 1568:1998 | Copper and copper alloys - Forging stock and forgings |
| AS 1572-1998 | Copper and copper alloys - Seamless tubes for engineering purposes (Reconfirmed 2018) |
| AS/NZS 6400:2005 | Water efficient products - Rating and labelling |
| AS/NZS 2499:2000 | Acoustics - Measurements of sound insulation in buildings and of buildings elements - Laboratory measurement of room-to-room airborne sound insulation of a suspended ceiling with a plenum above it (Reconfirmed 2016) |
| AS/NZS 3500.4:2018 | Plumbing and drainage Heated water services |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.