AS 4025.2-1993
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Paints for equipment including ships Solvent-borne - Interior and exterior - Undercoat
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
03-05-2018
English
01-01-1993
Specifies requirements for solvent-borne undercoat applied to equipment including ships.
Committee |
CH-003
|
DocumentType |
Standard
|
ISBN |
0 7262 8142 5
|
Pages |
9
|
PublisherName |
Standards Australia
|
Status |
Superseded
|
SupersededBy | |
Supersedes | |
UnderRevision |
This Standard sets out requirements for solvent-borne undercoat paints for ships and equipment, available in white or grey colour, that are intended to be applied, as supplied, by brush, roller, or by spray when thinned.This Standard applies to paints intended for the undercoating of primed metal surfaces that are to be topcoated with a semi-gloss or full gloss film that will provide resistance to weathering, washing and intermittent contact with petrol or mineral oils. Typical applications include machinery and the superstructures of ships.
AS/NZS 1580.213.1:1997 | Paints and related materials - Methods of test Relative dry hiding power (Reconfirmed 2013) |
AS 2854-2004 | Tinplate cans for general use |
AS 1580.104.1-1992 | Paints and related materials - Methods of test Recommended materials for test panels |
AS 1580.601.1-1975 | Paints and related materials - Methods of test Colour - Visual comparison |
AS/NZS 1580.457.1:1996 | Paints and related materials - Methods of test Resistance to natural weathering (Reconfirmed 2013) |
AS 1580.453.1-1992 | Paints and related materials - Methods of test Resistance to petroleum spirit |
AS 1580.205.1-1981 | Paints and related materials - Methods of test Application properties - Brushing |
AS 1580.453.1-2003 | Paints and related materials - Methods of test Resistance to solvent immersion |
AS 1580.481.3-2002 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of corrosion of coated metal substrates (Reconfirmed 2013) |
AS 1580.214.4-1990 | Paints and related materials - Methods of test - Consistency - Rotothinner |
AS 1580.204.1-1990 | Paints and related materials - Methods of test Fineness of grind |
AS 1580.214.3-2003 | Paints and related materials - Methods of test Viscosity - Cone-and-plate |
AS 1580.454.1-2002 | Paints and related materials - Methods of test Resistance to mineral oil and other organic liquids |
AS 1580.401.3-1990 | Paints and related materials - Methods of test Drying times using a BK-type recorder |
AS 1580.214.3-1993 | Paints and related materials - Methods of test Viscosity - Cone-and-plate |
AS/NZS 1580.205.3:1997 | Paints and related materials - Methods of test Application properties - Roller coating (Reconfirmed 2013) |
AS/NZS 1580.103.1:1995 | Paints and related materials Methods of test - Examination and preparation of samples for testing (Reconfirmed 2013) |
AS 1580.205.3-1981 | Paints and related materials - Methods of test Application properties - Roller coating |
AS 1580.101.5-1986 | Paints and related materials - Methods of test Conditions of test, temperature and humidity controlled |
AS/NZS 1580.403.1:1999 | Paints and related materials - Methods of test Scratch resistance (Reconfirmed 2013) |
AS 1580.603.1-2002 | Paints and related materials - Methods of test Finish - General appearance (Reconfirmed 2013) |
AS/NZS 1580.211.2:1995 | Paints and related materials - Methods of test Ease of manual re-incorporation (Reconfirmed 2013) |
AS 1580.481.1.8-1991 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of cracking |
AS/NZS 1580.481.1.9:1998 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of blistering (Reconfirmed 2013) |
AS/NZS 1580.104.1:2000 | Paints and related materials - Methods of test Recommended materials for test panels (Reconfirmed 2013) |
AS 1580.213.2-2004 | Paints and related materials - Methods of test Dry hiding power - Contrast ratio |
AS/NZS 1580.101.1:1999 | Paints and related materials - Methods of test Conditions of test - Temperature, humidity and airflow control (Reconfirmed 2013) |
AS 2310-1980 | Glossary of paint and painting terms |
AS 1580.105.2-1993 | Paints and related materials - Methods of test Pretreatment of metal test panels - Sanding |
AS 2312-1984 | Guide to the protection of iron and steel against exterior atmospheric corrosion |
AS/NZS 1580.204.1:1998 | Paints and related materials - Methods of test Fineness of grind (Reconfirmed 2013) |
AS 1580.457.1-1988 | Paints and related materials - Methods of test Resistance to natural weathering |
AS 1580.602.2-1974 | Paints and related materials - Methods of test Specular gloss |
AS 2905-2005 | Steel drums |
AS/NZS 2310:2002 | Glossary of paint and painting terms (Reconfirmed 2016) |
AS 1580.481.1.10-1991 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of flaking and peeling |
AS 1580.481.1.7-1991 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of checking |
AS 1580.101.1-1986 | Paints and related materials - Methods of test Air drying conditions |
AS/NZS 1580.481.1.7:1998 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of checking (Reconfirmed 2013) |
AS/NZS 1580.601.1:1995 | Paints and related materials - Methods of test Colour - Visual comparison (Reconfirmed 2013) |
AS 2854-1986 | Tinplate cans for general use |
AS 1580.213.1-1981 | Paints and related materials - Methods of test Relative dry hiding power |
AS/NZS 1580.214.5:1997 | Paints and related materials - Methods of test Consistency - Rotational viscometer (Reconfirmed 2013) |
AS 4025.1-1992 | Paints for equipment including ships Solvent-borne - Interior and exterior - Full gloss enamel |
AS/NZS 1580.455.1:1997 | Paints and related materials - Methods of test Resistance to water at room temperature (Reconfirmed 2013) |
AS/NZS 2312:2002 | Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings |
AS 1580.103.1-1980 | Paints and related materials - Methods of test Preliminary examination and preparation for testing |
AS 1580.205.4-1981 | Paints and related materials - Methods of test Application properties - Airless spraying |
AS 1580.401.3-2002 | Paints and related materials - Methods of test Drying times using a BK-type recorder |
AS/NZS 1580.214.4:1996 | Paints and related materials - Methods of test Consistency - Rotothinner (Reconfirmed 2013) |
AS/NZS 1580.205.2:1997 | Paints and related materials - Methods of test Application properties - Conventional spraying (Reconfirmed 2013) |
AS 1580.205.2-1981 | Paints and related materials - Methods of test Application properties - Conventional air spraying |
AS 1580.213.2-1992 | Paints and related materials - Methods of test Dry hiding power - Contrast ratio |
AS 1580.454.1-1992 | Paints and related materials - Methods of test Resistance to mineral oil |
AS 2905-1986 | Steel drums |
AS 1580.214.5-1990 | Paints and related materials - Methods of test - Consistency - Rotational viscometer |
AS 1580.203.1-1993 | Paints and related materials - Methods of test Skin formation |
AS 1580.481.3-1992 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of corrosion of coated metal substrates |
AS/NZS 1580.602.2:1995 | Paints and related materials - Methods of test Measurement of specular gloss of non-metallic paint films at 20°, 60° and 85° (Reconfirmed 2013) |
AS/NZS 1580.481.1.10:1998 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of flaking and peeling (Reconfirmed 2013) |
AS/NZS 1580.211.1:1995 | Paints and related materials - Methods of test Degree of settling (Reconfirmed 2013) |
AS/NZS 1580.205.4:1998 | Paints and related materials - Methods of test Application properties - Airless spraying (Reconfirmed 2013) |
AS 1580.211.2-1980 | Paints and related materials - Methods of test Ease of manual re-incorporation |
AS 1580.403.1-1981 | Paints and related materials - Methods of test Scratch resistance |
AS 1580.203.1-2004 | Paints and related materials - Methods of test Skin formation |
AS/NZS 1580.481.1.8:1998 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of cracking (Reconfirmed 2013) |
AS 1580.455.1-1982 | Paints and related materials - Methods of test Resistance to water at room temperature |
AS 1580.301.2-1990 | Paints and related materials - Methods of test Non-volatile content by volume (volume solids) (Reconfirmed 2013) |
AS/NZS 1580.101.5:1999 | Paints and related materials - Methods of test Conditions of test - Temperature and humidity control (Reconfirmed 2013) |
AS 1580.105.2-2002 | Paints and related materials - Methods of test Pretreatment of metal test panels - Sanding |
AS 1580.481.1.9-1991 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of blistering |
AS/NZS 1580.205.1:1997 | Paints and related materials - Methods of test Application properties - Brushing (Reconfirmed 2013) |
AS 1580.603.1-1992 | Paints and related materials - Methods of test Finish |
AS 1580.211.1-1980 | Paints and related materials - Methods of test Degree of settling |
AS 4025.3-1993 | Paints for equipment including ships Solvent-borne - Interior and exterior - Semi-gloss enamel |
AS 4025.4-1994 | Paints for equipment including ships Solvent-borne - Lead and chromate free - Anticorrosive metal primer |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.