AS 2427-2004
Current
The latest, up-to-date edition.
Smoke/heat release vents
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
10-05-2004
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Specifies requirements for buoyancy-driven smoke and heat exhaust vents that are intended to be mounted in roofs of buildings to release the products of combustion in the event of fire.
| Committee |
ME-062
|
| DocumentType |
Standard
|
| ISBN |
0 7337 5949 1
|
| Pages |
11
|
| ProductNote |
Reconfirmed 27/05/2016.This standard has been reconfirmed in Australia in 2016 and remains current in New Zealand. Reconfirmation Notice 27/05/2016
|
| PublisherName |
Standards Australia
|
| Status |
Current
|
| Supersedes |
This Standard specifies requirements for buoyancy-driven smoke and heat exhaust vents that are intended to be mounted in roofs of buildings to release the products of combustion in the event of fire.
Originated as AS 2427-1981.
Previous edition 1983.
Third edition 2004.
| AS/NZS 1567:1997 | Copper and copper alloys - Wrought rods, bars and sections (Reconfirmed 2021) |
| AS 1851.5-1981 | Maintenance of fire protection equipment - Automatic smoke/heat venting systems |
| AS 2428.4-2004 | Methods of testing smoke/heat release vents Determination of the effect of flame contact |
| AS 1897-1976 | Electroplated coatings on threaded components (metric coarse series) |
| AS/NZS 1734:1997 | Aluminium and aluminium alloys - Flat sheet, coiled sheet and plate (Reconfirmed 2020) |
| AS 1472-2003 | Carbon steel spring wire for mechanical springs |
| AS 1444-2007 | Wrought alloy steels - Standard, hardenability (H) series and hardened and tempered to designated mechanical properties (Reconfirmed 2017) |
| AS 1866:1997 | Aluminium and aluminium alloys - Extruded rod, bar, solid and hollow shapes (Reconfirmed 2020) |
| AS 1874-2000 | Aluminium and aluminium alloys - Ingots and castings (Reconfirmed 2018) |
| AS 2428.1-2004 | Methods of testing smoke/heat release vents Determination of resistance to leakage during rain |
| AS/NZS 1865:1997 | Aluminium and aluminium alloys - Drawn wire, rod, bar and strip (Reconfirmed 2020) |
| AS 1397-2001 | Steel sheet and strip - Hot-dipped zinc-coated or aluminium/zinc-coated |
| AS 2665-2001 | Smoke/heat venting systems - Design, installation and commissioning (Reconfirmed 2016) |
| AS 2428.2-2004 | Methods of testing smoke/heat release vents Determination of ability to operate under wind loading |
| AS 1562.1-1992 | Design and installation of sheet roof and wall cladding Metal (Reconfirmed 2016) |
| AS 2428.3-2004 | Methods of testing smoke/heat release vents Determination of operating characteristics |
| AS/NZS 1170.2:2002 | Structural design actions Wind actions |
| AS 2428.5-2004 | Methods of testing smoke/heat release vents Determination of discharge coefficient and effective aerodynamic area |
| AS 1890-1999 | Thermally released links (Reconfirmed 2016) |
| AS 1444-1996 | Wrought alloy steels - Standard, hardenability (H) series and hardened and tempered to designated mechanical properties |
| AS/NZS 1167.2:1999 | Welding and brazing - Filler metals Filler metal for welding |
| AS 2428.6-2004 | Methods of testing smoke/heat release vents Determination of ability to operate under snow loading |
| AS 2428.5-2004 | Methods of testing smoke/heat release vents Determination of discharge coefficient and effective aerodynamic area |
| AS 2665-2001 | Smoke/heat venting systems - Design, installation and commissioning (Reconfirmed 2016) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.