AS 2319-2001
Current
The latest, up-to-date edition.
Rigging screws and turnbuckles
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
12-10-2001
Specifies requirements for forged rigging screws and forged turnbuckles used in tension. It does not apply to rigging screws or turnbuckles that are used in compression or are smaller than 10mm. Guidance on information that should be supplied with enquiries and orders and on care and use in appendices.
Committee |
ME-025
|
DocumentType |
Standard
|
ISBN |
0 7337 4120 7
|
Pages |
20
|
ProductNote |
Reconfirmed 30/01/2014.This standard has been reconfirmed in Australia in 2014 and remains current in New Zealand. Reconfirmation Notice 30/01/2014
|
PublisherName |
Standards Australia
|
Status |
Current
|
Supersedes |
This Standard specifies requirements for forged rigging screws and forged turnbuckles used in tension. It does not apply to rigging screws or turnbuckles that are used in compression.NOTES: 1 Rigging screws and turnbuckles of sizes smaller than 10 mm are not included, as they can be easily overloaded by excessive tensioning.2 Guidance on information that should be supplied with enquiries and orders is given in Appendix A.3 Guidance on care and use is given in Appendix B.4 Standards for components used in lifting systems are listed in Appendix C.
Originated as AS 2319-1979.
Previous edition AS 2319-1984.
Third edition 2001.
AS/NZS 4680:2006 | Hot-dip galvanized (zinc) coatings on fabricated ferrous articles (Reconfirmed 2017) |
AS/NZS 4680:1999 | Hot-dip galvanized (zinc) coatings on fabricated ferrous articles |
AS 1816-1990 | Metallic materials - Brinell hardness test |
AS 1444-2007 | Wrought alloy steels - Standard, hardenability (H) series and hardened and tempered to designated mechanical properties (Reconfirmed 2017) |
AS 1399-1990 | Guide to AS 1199 - Sampling procedures and tables for inspection by attributes |
AS 1627.6-1994 | Metal finishing - Preparation and pretreatment of surfaces - Chemical conversion treatment of metals |
AS 1171-1998 | Non-destructive testing - Magnetic particle testing of ferromagnetic products, components and structures (Reconfirmed 2022) |
AS/NZS ISO 9000:2006 | Quality management systems - Fundamentals and vocabulary |
AS 1789-1984 | Electroplated coatings - Zinc on iron or steel |
AS 1214-1983 | Hot-dip galvanized coatings on threaded fasteners (ISO metric coarse thread series) |
AS 2193-2005 | Calibration and classification of force-measuring systems (Reconfirmed 2017) |
AS 1789-2003 | Electroplated zinc (electrogalvanized) coatings on ferrous articles (batch process) (Reconfirmed 2017) |
AS 1199-1988 | Sampling procedures and tables for inspection by attributes |
HB 18.28-2005 | Conformity assessment - Guidance on a third-party certification system for products |
AS/NZS ISO 9000:2000 | Quality management systems - Fundamentals and vocabulary |
AS/NZS ISO 9004:2000 | Quality management systems - Guidelines for performance improvements |
AS 1654.2-1995 | ISO system of limits and fits - Tables of standard tolerance grades and limit deviations for holes and shafts |
AS 1065-1988 | Non-destructive testing - Ultrasonic testing of carbon and low alloy steel forgings (Reconfirmed 2022) |
AS 1442-1992 | Carbon steels and carbon-manganese steels - Hot-rolled bars and semifinished products |
AS 1627.6-2003 | Metal finishing - Preparation and pretreatment of surfaces Chemical conversion treatment of metals (Reconfirmed 2017) |
AS 1442-2007 | Carbon steels and carbon-manganese steels - Hot rolled bars and semifinished products (Reconfirmed 2017) |
AS 1444-1996 | Wrought alloy steels - Standard, hardenability (H) series and hardened and tempered to designated mechanical properties |
AS 2193-1978 | Methods for calibration and grading of force-measuring systems of testing machines |
AS 1721-1985 | General purpose metric screw threads (Reconfirmed 2017) |
HB 18.28-1991 | Guidelines for third-party certification and accreditation - Guide 28: General rules for a model third-party certification system for products |
AS 2550.1-2011 | Cranes, hoists and winches - Safe use General requirements |
AS 3585-2008 | End fittings for synthetic flat-webbing and round slings (Reconfirmed 2019) |
AS 3776-2006 | Lifting components for Grade T chain slings |
AS/NZS 4576:1995 | Guidelines for scaffolding |
AS 1418.1-2002 | Cranes, hoists and winches General requirements |
AS 1666.2-2009 | Wire-rope slings Care and use (Reconfirmed 2019) |
AS 3777-2008 | Shank hooks and large eye hooks - Maximum 60 t (Reconfirmed 2019) |
AS 2316.1-2009 | Artificial climbing structures and challenge courses Fixed and mobile artificial climbing and abseiling walls |
AS 1417.1-1987 | Receiving antennas for radio and television in the frequency range 30 MHz to 1 GHz - Construction and installation |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.