AS 2167-1996
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Graduated straight pipettes
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
22-09-2017
English
05-12-1996
Provides specifications for a range of graduated straight pipettes required for general laboratory use.
Committee |
CH-001
|
DocumentType |
Standard
|
ISBN |
0 7337 0753 X
|
Pages |
14
|
PublisherName |
Standards Australia
|
Status |
Superseded
|
SupersededBy | |
Supersedes | |
UnderRevision |
This Standard applies to a series of graduated straight pipettes suitable for general laboratory purposes. The following four types of pipette are specified:(a) Type I-N pipettes, which are adjusted for delivery of a liquid from the zero line at the top to any graduation line, where the nominal capacity is represented by the lowest graduation line.(b) Type II-N pipettes, which are adjusted for delivery of a liquid from any graduation line down to the jet, where the nominal capacity is represented by the highest graduation line.(c) Type III-N and Type III-W pipettes, which are adjusted for delivery of a liquid from the zero line at the top to any graduation line, where the nominal capacity is obtained by delivery down to the jet.Two classes of accuracy are specified, Class A pipettes being of higher accuracy than Class B pipettes. Type III-N pipettes are only Class B while Type III-W pipettes are only Class A.NOTE: The method of verification and notes for the use of pipettes are given in AS 2162.
First published as AS R7-1947.
Revised and redesignated AS 2167-1978.
Second edition 1996.
AS 2162-1979 | Code of practice for the use of volumetric glassware |
AS 1329.6-1981 | Methods for the analysis of zinc and zinc alloys Determination of copper content (0.25 percent to 1.25 percent) - Flame atomic absorption spectrometric method |
AS 2434.6-2002 | Methods for the analysis and testing of lower rank coal and its chars Lower rank coal - Ultimate analysis - Classical methods (Reconfirmed 2013) (Reconfirmed 2023) |
AS 4479.3-1999 | Analysis of soils Determination of metals in aqua regia extracts of soil by flam atomic absorption spectrometry (Reconfirmed 2018) |
AS 3844-1998 | Recommended practice for metal analysis by electrochemical stripping techniques |
AS 2300.4.8-1994 | Methods of chemical and physical testing for the dairying industry Dried milk and dried milk products - Determination of undenatured whey protein nitrogen (UDWPN) in dried skim milk (Reconfirmed 2019) |
AS/NZS 1050.18:1994 | Methods for the analysis of iron and steel Determination of phosphorus - Spectrophotometric method (Reconfirmed 2016) |
AS/NZS 1050.27:1994 | Methods for the analysis of iron and steel Determination of titanium content - Spectrophotometric method (Reconfirmed 2016) |
AS 3587.6-1998 | Ferroalloys - Chemical analysis Determination of phosphorus content- Spectrophotometric method |
AS 1329.3-1994 | Methods for the analysis of zinc and zinc alloys Determination of aluminium content - Flame atomic absorption spectrometric method (Reconfirmed 2016) |
AS/NZS 4308:2001 | Procedures for the collection, detection and quantitation of drugs of abuse in urine |
AS 2300.4.9-1994 | Methods of chemical and physical testing for the dairying industry Dried milk and dried milk products - Determination of lactose - Enzymatic method (Reconfirmed 2016) |
AS/NZS 1050.28:1994 | Methods for the analysis of iron and steel Vanadium in steel - Potentiometric method (Reconfirmed 2016) |
AS 1329.5-1994 | Methods for the analysis of zinc and zinc alloys Determination of copper content (0.0001% to 0.0025%) - Flame atomic absorption spectrometric method (Reconfirmed 2016) |
AS 5006.1-2002 | Silver and silver bearing alloys Determination of silver content (0.1% to 99.9%) - Tritrimetric (potentiometric) method (Reconfirmed 2016) |
AS 1515.1-1994 | Copper alloys Determination of lead in copper alloys (flame atomic absorption spectrometric method) (Reconfirmed 2016) |
AS 2300.6.8-1997 | Methods of chemical and physical testing for the dairying industry Cheese - Determination of nitrate and nitrite in cheese by cadmium reduction and photometry |
AS/NZS 1050.24:1994 | Methods for the analysis of iron and steel Determination of aluminium content - Spectrophotometric method (Reconfirmed 2016) |
AS/NZS 1050.14:1994 | Methods for the analysis of iron and steel Determination of manganese in iron and steel - Titrimetric method |
AS 3753-2001 | Recommended practice for chemical analysis by ultraviolet/visible spectrophotometry |
AS 1515.2-1994 | Copper alloys Determination of manganese content - Flame atomic absorption spectrometric method |
AS 1329.2-1994 | Methods for the analysis of zinc and zinc alloys Determination of magnesium content - Flame atomic absorption spectrometric method |
AS 4308-1995 | Recommended practice for the collection, detection and quantitation of drugs of abuse in urine |
AS/NZS 1050.20:1994 | Methods for the analysis of iron and steel Determination of magnesium content - Flame atomic absorption spectrometric method (Reconfirmed 2016) |
AS 1038.7-1981 | Coal and coke - Analysis and testing - Ultimate analysis of coke |
AS/NZS 1050.21:1994 | Methods for the analysis of iron and steel Determination of cobalt content - Spectrophotometric method (Reconfirmed 2016) |
AS 1038.6.3.1-1997 | Coal and coke - Analysis and testing Higher rank coal and coke - Ultimate analysis - Total sulfur - Eschka method (Reconfirmed 2013) |
AS/NZS 1050.26:1994 | Methods for the analysis of iron and steel Silicon in iron and steel - Spectrophotometric method (Reconfirmed 2016) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.