AS 2030.2-1996
AvailableSuperseded
An Available Superseded Standard is one, which has been made available for a period of time although it has been formally superseded by another Standard. Its availability is maintained where it is referenced in legislation/regulations or in other Standards and its use should be restricted to where so referenced. No responsibility is taken by Intertek Inform as to the ongoing technical validity of such a Standard, the responsibility resting with the referencing authority.
The verification, filling, inspection, testing and maintenance of cylinders for the storage and transport of compressed gases Cylinders for dissolved acetylene
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
05-10-1996
Important note : All end users must be registered with an Account prior to user licenses being assigned.This Standard introduces the concepts of blowdown rack as a safety measure for dealing with leaking or damaged cylinders. It also introduces the concept of a loose identification collar. The collar is to carry the cylinder identification marks and is retained by the cylinder valve. These two new concepts will enhance safety in the use of acetylene gas.
| Committee |
ME/2
|
| DocumentType |
Standard
|
| ISBN |
0 7337 0741 6
|
| Pages |
7
|
| ProductNote |
Pending Revision indicates that as a result of the Aged Standards review process, the document needs updating. If no project proposal, meeting the quality criteria, is received within the 12 month timeframe, the document shall be withdrawn.
|
| PublisherName |
Standards Australia
|
| Status |
AvailableSuperseded
|
| SupersededBy | |
| Supersedes | |
| UnderRevision |
This Standard specifies requirements for the acceptance, filling, inspection, and care of refillable gas cylinders for the storage of compressed acetylene dissolved in a solvent, and having a cylinder shell water capacity exceeding 5 kg.NOTES:1 Requirements for cylinders for gases other than acetylene are specified in AS 2030.1.2 This Standard provides for solvents other than acetone, but only dimethylformamide (DMF) has been specifically considered as an alternative and DMF should be used only where cylinders are in manifolded crates.3 The requirements of this Standard are not intended to preclude the filling of previously acceptable, and not specifically provided for, small dissolved acetylene gas cylinders (of nominal water capacities 5.0 to 11 kg).
Originated as part of AS CB4-1931.
Previous edition part of AS 2030.2-1985.
Second edition 1996.
Reissued incorporating Amendment Nos 1 and 2 (September 2000).
| AS 1678.2A1-2004 | Emergency procedure guide - Transport - Flammable, compressed gas (Reconfirmed 2016) |
| AS 2470-2005 | Steel cylinders for compressed gases - Welded three-piece construction with longitudinal joint - 11 kg to 150 kg (Reconfirmed 2016) |
| AS 2874-1986 | High tensile carbon-manganese steel cylinders for compressed gases - Seamless - 0.1 kg to 500 kg |
| AS 2875-1995 | Alloy steel cylinders for compressed gases - Seamless - 0.1 kg to 500 kg |
| AS 2473-1990 | Valves for compressed gas cylinders (threaded outlet) |
| AS 2469-2005 | Steel cylinders for compressed gases - Welded two-piece construction - 0.1 kg to 150 kg |
| AS 2873-1986 | Carbon-manganese steel cylinders for compressed gases - Seamless - 0.1 kg to 500 kg |
| AS 2527-1997 | Cylinders for dissolved acetylene |
| AS 2470-1998 | Steel cylinders for compressed gases - Welded three-piece construction with longitudinal joint - 11 kg to 150 kg |
| AS 2469-1998 | Steel cylinders for compressed gases - Welded two-piece construction - 0.1 kg to 35 kg |
| AS 1678.2A1-1987 | Emergency procedure guide - Transport - Group text EPGs for Class 2 substances - Compressed and liquefied gases - Flammable, compressed gas |
| AS 2337.1-1999 | Gas cylinder test stations General requirements, inspections and tests - Gas cylinders |
| AS 2508.2.001-1992 | Safe storage and handling information card - Acetylene (Dissolved) (Ethyne) |
| AS 2527-2006 | Cylinders for dissolved acetylene |
| AS/NZS ISO 9001:1994 | Quality systems - Model for quality assurance in design, development, production, installation and servicing |
| AS/NZS ISO 9001:2000 | Quality management systems - Requirements |
| AS 2473-1996 | Valves for compressed gas cylinders (threaded outlet) |
| AS 2030.1-1999 | The verification, filling, inspection, testing and maintenance of cylinders for storage and transport of compressed gases Cylinders for compressed gases other than acetylene |
| AS 1943-1987 | Industrial gas cylinder identification |
| AS 2337.1-2004 | Gas cylinder test stations General requirements, inspection and tests - Gas cylinders |
| AS 1470-1986 | Health and safety at work - Principles and practices |
| AS/NZS 1716:2012 | Respiratory protective devices (Reconfirmed 2024) |
| AS 5483-2012 | Minimizing the risk of contamination in products used to collect and analyse biological material for forensic DNA purposes |
| AS/NZS 2243.1:1997 | Safety in laboratories General |
| AS 5388.1-2012 | Forensic analysis Recognition, recording, recovery, transport and storage of material |
| AS 2809.1-2008 | Road tank vehicles for dangerous goods General requirements for all road tank vehicles |
| AS 1843-1976 | Foam (chemical) type portable fire extinguishers |
| AS/NZS 1200:2000 | Pressure equipment |
| AS 2809.1-1999 | Road tank vehicles for dangerous goods - General requirements |
| AS 3200-1986 | Approval and test specification - Electromedical equipment - General requirements |
| AS 4037-1992 | Boilers and pressure vessels - Examination and testing |
| AS/NZS 60079.10.1:2009 | Explosive atmospheres Classification of areas - Explosive gas atmospheres (IEC 60079-10-1, Ed.1.0(2008) MOD) |
| AS 4484-1997 | Industrial, medical and refrigerant compressed gas cylinder identification |
| AS/NZS 5601.2:2020 | Gas installations LP Gas installations in caravans and boats for non-propulsive purposes |
| AS 2527-1997 | Cylinders for dissolved acetylene |
| AS 2030.1-2009 | Gas cylinders General requirements |
| AS 1840-1976 | Water type portable fire extinguishers - Water (soda acid) type |
| AS/NZS 3788:1996 | Pressure equipment - In-service inspection |
| AS/NZS 3130:1995 | Approval and test specification - Beauty therapy equipment |
| AS 2030.1-1999 | The verification, filling, inspection, testing and maintenance of cylinders for storage and transport of compressed gases Cylinders for compressed gases other than acetylene |
| AS/NZS 2243.1:2005 | Safety in laboratories Planning and operational aspects |
| AS 4332-2004 | The storage and handling of gases in cylinders (Reconfirmed 2016) |
| AS 2527-2006 | Cylinders for dissolved acetylene |
| AS 2473-1996 | Valves for compressed gas cylinders (threaded outlet) |
| AS/NZS 2430.3.1:2004 | Classification of hazardous areas Examples of area classification - General |
| AS/NZS 3788:2006 | Pressure equipment - In-service inspection (Reconfirmed 2017) |
| HB 13-2007 | Electrical equipment for hazardous areas |
| AS 4484:2016 | Gas cylinders for industrial, scientific, medical and refrigerant use - Labelling and colour coding |
| AS 3580.2.2-1990 | Methods for sampling and analysis of ambient air Preparation of reference test atmospheres - Compressed gas method |
| HB 13-2000 | Electrical equipment for hazardous areas |
| AS 4484-2004 | |
| AS/NZS 3788:2001 | Pressure equipment - In-service inspection |
| AS 2030.5-2009 | Gas cylinders Filling, inspection and testing of refillable cylinders |
| AS 2971-2002 | Serially produced pressure vessels |
| AS 2971-2007 | Serially produced pressure vessels (Reconfirmed 2017) |
| AS 4332-1995 | The storage and handling of gases in cylinders |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.