AS 1931.1-1996
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
High-voltage test techniques - General definitions and test requirements
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
30-06-2017
English
01-01-1996
Applies to tests with direct, alternating and impulse voltage and with impulse currents on equipment having its highest voltage above 1 kV. This Standard is identical with and has been reproduced from IEC 60-1:1989 and its Corrigendum:1992.
Committee |
EL-007
|
DocumentType |
Standard
|
ISBN |
0 7337 0231 7
|
Pages |
68
|
PublisherName |
Standards Australia
|
Status |
Withdrawn
|
Supersedes |
This standard is applicable to:- dielectric tests with direct voltage;- dielectric tests with alternating voltage; - dielectric tests with impulse voltage;- tests with impulse current; - tests with combinations of the above.This standard is applicable only to tests on equipment having its highest voltage for equipment Um above 1 kV.This standard is not intended to be used for electromagnetic compatibility tests on electric or electronic equipment.
Standards | Relationship |
IEC 60060-1:1989 | Identical |
IEC 60060-1:1989/COR1:1992 | Identical |
First published as AS C94-1942 (being endorsement of BS 923-1940 without Amendment).
Revised and redesignated AS C328-1960.
Second edition 1965.
Revised and redesignated AS 1931.1-1976.
Second edition 1996.
AS 2886-1986 | Voltage measurement - Sphere-gap method (one sphere earthed) |
AS 1931.2-1996 | High-voltage test techniques - Measuring systems |
AS 1018-1985 | Partial discharge measurements |
AS/NZS 3133:2003 | Approval and test specification - Air break switches |
AS 62052.11-2005 | Electricity metering equipment (AC) - General requirements, tests and test conditions Metering equipment (IEC 62052-11, Ed.1.0 (2003) MOD) |
AS/NZS 61008.1:2011 | Residual current operated circuit breakers without integral overcurrent protection for household and similar uses (RCCBs) General rules (IEC 61008-1, Ed. 3.0 (2010) MOD) |
AS/NZS 3100:1997 | Approval and test specification - General requirements for electrical equipment |
AS 62052.21-2006 | Electricity metering equipment (ac) - General requirements, tests and test conditions Tariff and load control equipment (IEC 62052-21, Ed. 1.0 (2004) MOD) |
AS 3300-1996 | Approval and test specification - General requirements for household and similar electrical appliances |
AS 1418.10-1996 | Cranes (including hoists and winches) - Elevating work platforms |
AS 1429.1-1993 | Electric cables - Polymeric insulated For working voltages 1.9/3.3 (3.6) kV up to and including 19/33 (36) kV |
AS 62271.100-2005 | High-voltage switchgear and controlgear High-voltage alternating current circuit-breakers (IEC 62271-100, Ed. 1.1 (2003) MOD) |
AS 1767.2.1-1999 | Insulating liquids, Part 2: Test methods Determination of the breakdown voltage at power frequency (Reconfirmed 2016) |
AS 62310.1-2005 | Static transfer systems (STS) General and safety requirements (Reconfirmed 2016) |
AS/NZS 1158.6:2010 | Lighting for roads and public spaces Luminaires |
AS 4435.4-2005 | Insulators - Composite for overhead power lines - Voltages greater than 1000 V a.c. Definitions, test methods, acceptance criteria for post insulator units (Reconfirmed 2016) |
AS/NZS 3599.2:1999 | Electric cables - Aerial bundled - Polymeric insulated - Voltages 6.35/11(12) kV and 12.7/22(24) kV Non-metallic screened |
AS 4362.2-1996 | High-voltage test techniques for low-voltage equipment Test equipment |
AS 1284.6-1992 | Electricity metering Ripple control receivers for tariff and load control |
AS 1137.3-1981 | Insulators - Porcelain and glass indoor and outdoor station post insulators (for voltages greater than 1000 V a.c.) |
AS 60044.2-2007 | Instrument transformers Inductive voltage transformers (IEC 60044-2:Ed.1.2 (2003) MOD) |
AS 4117(INT)-1993 | Surge suppression devices for telecommunication applications |
AS 61010.031-2004 | Safety requirements for electrical equipment for measurement, control and laboratory use Safety requirements for hand held probe assemblies for electrical measurement and test (IEC 61010-031:2002 MOD) |
AS/NZS 3133:2008 | Approval and test specification - Air-break switches |
AS/NZS 61058.1:2008 | Switches for appliances General requirements (IEC 61058-1, Ed. 3.1 (2000), MOD) |
AS 2264-1995 | A.C. insulation-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 38 kV |
AS/NZS 4117:1999 | Surge protective devices for telecommunication applications |
AS/NZS 61534.1:2008 | Powertrack systems General requirements (IEC 61534-1, Ed. 1 (2003) MOD) |
AS/NZS 1300:2009 | Electrical equipment for mines and quarries - Bolted explosion-protected three-phase cable coupling devices (Reconfirmed 2020) |
AS/NZS 1768:2007 | Lightning protection |
AS 60060.3-2008 | High-voltage test techniques Definitions and requirements for on-site testing |
AS 3134(INT)-1991 | Approval and test specification - a.c. supplied electronic ballasts for tubular fluorescent lamps |
AS 1768-1991 | Lightning protection |
AS 4202-1994 | Insulating covers for electrical purposes |
AS 1307.2-1996 | Surge arresters Metal-oxide surge arresters without gaps for a.c. systems (Reconfirmed 2015) |
AS 1265-1990 | Bushings for alternating voltages above 1000 V |
AS/NZS 60137:2008 | Insulated bushings for alternating voltages above 1000 V (IEC 60137, Ed. 5.0 (2003) MOD) |
AS/NZS 1429.1:2006 | Electric cables - Polymeric insulated For working voltages 1.9/3.3 (3.6) kV up to and including 19/33 (36) kV |
AS IEC 60437-2005 | Radio interference test on high-voltage insulators (Reconfirmed 2016) |
AS/NZS 1660.3:1998 | Test methods for electric cables, cords and conductors Electrical tests (Reconfirmed 2017) |
AS/NZS 60076.3:2008 | Power transformers Insulation levels, dielectric tests and external clearances in air (IEC 60076-3, Ed. 2 (2000) MOD) |
AS/NZS 3190:2002 | Approval and test specification - Residual current devices (current-operated earth-leakage devices) |
AS/NZS 4871.1:2010 | Electrical equipment for mines and quarries General requirements |
AS 2732-1984 | Guide to the lightning impulse and switching impulse testing of power transformers and reactors |
AS 1352.1-1991 | Fixed resistors for use in electronic equipment Terms and methods of test - Generic specification (QC400000) |
AS 1824.1-1995 | Insulation co-ordination Definitions, principles and rules |
AS 62217-2007 | Polymeric insulators for indoor and outdoor use with a nominal voltage > 1000 V - General definitions, test methods and acceptance criteria |
AS/NZS 2081:2011 | Electrical protection devices for mines and quarries (Reconfirmed 2022) |
AS 62271.200-2005 | High-voltage switchgear and controlgear A.C. metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV (IEC 62271-200, Ed. 1 (2003) MOD) |
AS 1154.1-2009 | Insulator and conductor fittings for overhead power lines Performance, material, general requirements and dimensions (Reconfirmed 2019) |
AS/NZS 2802:2000 | Electric cables - Reeling and trailing - For mining and general use (other than underground coal mining) (Reconfirmed 2020) |
AS 3134-1992 | Approval and test specification - a.c. supplied electronic ballasts for tubular fluorescent lamps |
AS/NZS 60840:2006 | Power cables with extruded insulation and their accessories for rated voltages above 30 kV (Um = 36 kV) up to 150 kV (Um = 170 kV) - Test methods and requirements |
AS/NZS 4802.3:1994 | Information processing systems - Local area networks Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications |
AS/NZS 4117:1996 | Surge suppression devices for telecommunication applications |
AS/NZS 61000.4.5:1999 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Surge immunity test |
AS 1824.2-1985 | Insulation coordination (phase-to-earth and phase-to-phase, above 1 kV) - Application guide |
AS 3609-2005 | Insulators - Porcelain stay type - Voltages greater than 1000 V a.c. |
AS 1284.5-1992 | Electricity metering General purpose electronic watthour meters |
AS 60270-2001 | High-voltage test techniques - Partial discharge measurements (Reconfirmed 2015) |
AS/NZS 2978:1995 | Insulating mats for electrical purposes |
AS 2629-2008 | Separable insulated connectors for power distribution systems above 1 kV (Reconfirmed 2019) |
AS 60870.2.1-1998 | Telecontrol equipment and systems Operating conditions - Power supply and electromagnetic compatibility |
AS 1418.10(INT)-2004 | Cranes, hoists and winches Elevating work platforms |
AS 4428.0-1997 | Fire detection, warning, control and intercom systems - Control and indicating equipment General requirements and test methods (Reconfirmed 2016) |
AS/NZS 2373.2:1995 | Electric cables for control and protection circuits - Twisted pair control cables |
AS 2067-1984 | Switchgear assemblies and ancillary equipment for alternating voltages above 1 kV |
AS 60044.1-2007 | Instrument transformers Current transformers (IEC 60044-1 Ed.1.2 (2003) MOD) (Reconfirmed 2016) |
AS/NZS 61058.1:2002 | Switches for appliances General requirements (IEC 61058.1:2000 MOD) |
AS/NZS 1802:2003 | Electric cables - Reeling and trailing - For underground coal mining purposes |
AS 2263-1995 | Gas-insulated metal-enclosed switchgear for rated voltages of 72.5 kV and above |
AS/NZS 3190:2009 | Approval and test specification - Residual current devices (current-operated earth-leakage devices) |
AS 62271.100-2008 | High-voltage switchgear and controlgear High-voltage alternating-current circuit-breakers (IEC 62271-100, Ed. 1.2 (2006) MOD) |
AS/NZS 1418.10:2011 | Cranes, hoists and winches Mobile elevating work platforms |
AS 62103-2006 | Electronic equipment for use in power installations |
AS 1418.12-1991 | Cranes (including hoists and winches) Crane collector systems (Reconfirmed 2016) |
AS 1802-1992 | Electric cables - Reeling and trailing - For underground coal mining purposes |
AS 2326.1-1991 | On-load tap-changers - Requirements |
AS 62271.201-2008 | High-voltage switchgear and controlgear AC insulation-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV |
AS 3439.1-1993 | Low-voltage switchgear and controlgear assemblies Type-tested and partially type-tested assemblies |
AS/NZS 2947.1:1999 | Insulators - Porcelain and glass for overhead power lines - Voltages greater than 1000 V a.c. Test methods - Insulator units |
AS/NZS 2650:2000 | Common specifications for high-voltage switchgear and controlgear standards |
AS 2067-2008 | Substations and high voltage installations exceeding 1 kV a.c. |
AS 1284.1-1991 | Electricity metering General purpose induction watthour meters |
AS 62231-2007 | Composite station post insulators for substations with a.c. voltages greater than 1000 V up to 245 kV - Definitions, test methods and acceptance criteria |
AS 1026-1992 | Electric cables - Impregnated paper insulated - Working voltages up to and including 33 kV |
AS 1033.2-1988 | High voltage fuses (For rated voltages exceeding 1000 V) Current-limiting (Powder-filled) type (Reconfirmed 2018) |
AS 1018-1985 | Partial discharge measurements |
AS 2989-1992 | Electrical equipment for coal mines - Specific requirements for high voltage circuit-breakers and disconnectors |
AS/NZS 60898.1:2004 | Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations Circuit-breakers for a.c. operation (IEC 60898-1, Ed. 1.2 (2003) MOD) |
AS 3168-1991 | Approval and test specifications - Fluorescent lamp ballasts |
AS 60076.4-2006 | Power transformers Guide to the lightning impulse and switching impulse testing - Power transformers and reactors (Reconfirmed 2016) (Reconfirmed 2024) |
AS/NZS 1802:2018 | Electric cables - Reeling and trailing - For underground coal mining |
AS/NZS 3350.2.76:1998 | Safety of household and similar electrical appliances Particular requirements - Electric fence energizers |
AS 4435.1-1996 | Insulators - Composite for overhead lines - Voltages greater than 1000 V a.c. Definitions, test methods and acceptance criteria for string insulator units |
AS/NZS 1026:2004 | Electric cables - Impregnated paper insulated - For working voltages up to and including 19/33 (36) kV |
AS 2374.3.1-1992 | Power transformers Insulation levels and dielectric test - External clearances in air |
AS 1243-1982 | Voltage transformers for measurement and protection |
AS/NZS 3947.1:1998 | Low-voltage switchgear and controlgear General rules |
AS 1284.1-2004 | Electricity metering General purpose induction watthour meters (Reconfirmed 2019) |
AS 1033.1-1990 | High voltage fuses (for rated voltages exceeding 1000 V) Expulsion type (Reconfirmed 2018) |
AS 1154.1-2004 | Insulator and conductor fittings for overhead power lines - Performance, material, general requirements and dimensions |
AS/NZS 3100:2002 | Approval and test specification - General requirements for electrical equipment |
AS/NZS 2947.4:1999 | Insulators - Porcelain and glass for overhead power lines - Voltages greater than 1000 V a.c. Test methods - Insulator strings and insulator sets |
AS/NZS 61009.1:2011 | Residual current operated circuit breakers with integral overcurrent protection for household and similar uses (RCBOs) General rules (IEC 61009-1, Ed. 3.0 (2010) MOD) |
AS 3100-1994 | Approval and test specification - General requirements for electrical equipment |
AS 60052-2005 | Voltage measurement by means of standard air gaps (Reconfirmed 2016) |
AS 2374.3.0-1982 | Power transformers Insulation levels and dielectric tests - General requirements |
AS/NZS 3190:2016 | Approval and test specification - Residual current devices (current operated earth-leakage devices) |
AS 2067:2016 | Substations and high voltage installations exceeding 1 kV a.c. |
AS/NZS 3100:2009 | |
AS 2629-1983 | Separable insulated connectors for power distribution systems above 1 kV |
AS 1801-1981 | Industrial safety helmets |
AS 3190-1994 | Approval and test specification - Residual current devices (current-operated earth-leakage devices) |
AS 61330-2005 | High-voltage/low-voltage prefabricated substations |
AS 3947.1-1993 | Low-voltage switchgear and controlgear General rules |
AS/NZS 3133:2013 | Approval and test specification - Air-break switches |
AS 4398.2-1996 | Insulators - Ceramic or glass - Station post for indoor and outdoor use - Voltages greater than 1000 V a.c. Tests |
AS 1931.2-1996 | High-voltage test techniques - Measuring systems |
AS 1029.2-1982 | Low voltage contactors - Semiconductor (solid state) (up to and including 1000 V a.c. and 1500 V d.c.) |
AS 2220.1-1989 | Emergency warning and intercommunication systems in buildings Equipment design and manufacture |
AS 4398.2-2005 | Insulators - Ceramic or glass - Station post for indoor or outdoor use - Voltages greater than 1000 V a.c. Tests (IEC 60168, Ed. 4.2 (2001) MOD) |
AS/NZS 1158.6:2004 | Lighting for roads and public spaces Luminaires |
AS 3771-1998 | Road lighting luminaires with integral control gear |
AS 1284.9-1993 | Electricity metering - Electronic watthour meters (Classes 0.2 S and 0.5 S) |
AS 2897-1986 | Power capacitors - Shunt - Rated voltages above 660 v a.c. |
AS 2802-1992 | Electric cables - Reeling and trailing - For mining and general use (other than underground coal mining) |
AS/NZS 3439.1:2002 | Low-voltage switchgear and controlgear assemblies Type-tested and partially type tested assemblies (IEC 60439-1:1999 MOD) |
AS 4168.2-1994 | Programmable controllers - Equipment requirements and tests |
AS 60034.1-2009 | Rotating electrical machines Rating and performance |
AS 2650-2005 | Common specifications for high-voltage switchgear and controlgear standards (IEC 60694 Ed.2.2(2002) MOD) |
AS 2362.8-1990 | Automatic fire detection and alarm systems - Methods of test for actuating devices - Impulse voltage withstand test |
AS/NZS 4871.1:2012 | Electrical equipment for mines and quarries General requirements |
AS 4435.4-1997 | Insulators - Composite for overhead power lines - Voltages greater than 1000 V a.c. Definitions, test methods and acceptance criteria for post insulator units |
AS/NZS 1429.1:2000 | Electric cables - Polymeric insulated For working voltages 1.9/3.3 (3.6) kV up to and including 19/33 (36) kV |
AS/NZS 60079.14:2009 | Explosive atmospheres Electrical installations design, selection and erection (IEC 60079-14, Ed. 4.0 (2007) MOD) |
AS/NZS 1768(INT):2003 | Lightning protection |
AS 1028-1992 | Power reactors and earthing transformers |
AS/NZS 3947.1:2001 | Low-voltage switchgear and controlgear General rules |
AS/NZS 3190:2011 | Approval and test specification - Residual current devices (current-operated earth-leakage devices) |
AS 60269.2.1-2005 | Low-voltage fuses Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Sections I to VI: Examples of types of standardized fuses |
AS/NZS 1429.2:1998 | Electric cables - Polymeric insulated - For working voltages above 19/33 (36) kV up to and including 76/132 (145) kV |
AS 60947.1-2004 | Low-voltage switchgear and controlgear General rules |
AS/NZS 3129.1:1993 | Approval and test specification - Electric fence energizers Safety requirements for mains-operated electric fence energizers |
AS/NZS 4871.1:2002 | Electrical equipment for coal mines, for use underground General requirements |
AS 1660.3-1993 | |
AS/NZS 3835.1:2006 | Earth potential rise - Protection of telecommunications network users, personnel and plant Code of practice |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.