AS 1627.1-2003
Current
The latest, up-to-date edition.
Metal finishing - Preparation and pretreatment of surfaces Removal of oil, grease and related contamination (Reconfirmed 2017)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
02-06-2003
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Specifies procedures for cleaning metal surfaces of loosely adhering matter, oil, grease, wax, dirt, by treatment with solvents and alkaline solutions.
| Committee |
MT-009
|
| DocumentType |
Standard
|
| ISBN |
0 7337 5257 8
|
| Pages |
12
|
| ProductNote |
Reconfirmed 07/04/2017.This standard has been reconfirmed in Australia in 2017 and remains current in New Zealand. Reconfirmation Notice 07/04/2017
|
| PublisherName |
Standards Australia
|
| Status |
Current
|
| Supersedes |
This Standard sets out a variety of methods for eliminating dirt and organic residues, such as oil, grease and related contaminates from metal surfaces, so as to facilitate the satisfactory application of finished coatings. Methods described for decontaminating surfaces include simple solvent wiping, immersion in solvent, solvent spray, vapour degreasing, emulsion cleaning, and alkaline cleaning. The process will usually remove loose adherent dirt from affected surfaces. Depending on the nature of the finish coating to be applied, cleaning by any of the procedures described in this Standard may be followed by a more rigorous intermediate treatment, such as pickling or abrasive blast cleaning. NOTE: Appendix A contains advice and recommendations on information which should be supplied by the purchaser at the time of inquiry or order.
Originated as AS CK9.1-1965.
Previous edition AS 1627.1-1989.
Third edition 2003.
| AS 4108-2005 | Metal finishing - Glossary of terms in electroplating and related processes (Reconfirmed 2017) |
| AS 4108-1993 | Metal finishing - Glossary of terms used in electroplating and related processes |
| AS/NZS 1715:1994 | Selection, use and maintenance of respiratory protective devices |
| AS 3894.6-2002 | Site testing of protective coatings Determination of residual contaminants (Reconfirmed 2013) |
| AS/NZS 1716:1994 | Respiratory protective devices |
| AS/NZS 1337:1992 | Eye protectors for industrial applications |
| AS/NZS 1716:2003 | Respiratory protective devices |
| AS 2661-1983 | Vapour degreasing plant - Design, installation and operation - Safety requirements |
| AS 2419.3-2012 | Fire hydrant installations Fire brigade booster connections |
| AS 4848.1-2006 | Application specifications for coating systems Single coat inorganic (ethyl) zinc silicate - Solvent-borne |
| AS 1901-2004 | Electroplated coatings - Gold and gold alloys |
| AS 2309-2008 | Durability of galvanized and electrogalvanized zinc coatings for the protection of steel in structural applications - Atmospheric |
| AS 1627.0-1997 | Metal finishing - Preparation and pretreatment of surfaces Method selection guide (Reconfirmed 2017) |
| AS 1627.5-2003 | Metal finishing - Preparation and pretreatment of surfaces Pickling (Reconfirmed 2017) |
| AS 2400.5-2005 | Packaging Temporary corrosion protection (Reconfirmed 2016) |
| AS 1627.6-2003 | Metal finishing - Preparation and pretreatment of surfaces Chemical conversion treatment of metals (Reconfirmed 2017) |
| AS 4848.1:2019 | Application specifications for coating systems Single coat inorganic (ethyl) zinc silicate - Solvent-borne |
| AS 1485-1983 | Safety and health in workrooms of educational establishments |
| AS 4506-2005 | Metal finishing - Thermoset powder coatings (Reconfirmed 2017) |
| AS 3978-2003 | Non-destructive testing - Visual inspection of metal products and components (Reconfirmed 2022) |
| AS/NZS 3750.9:2009 | Paints for steel structures Organic zinc-rich primer (Reconfirmed 2019) |
| AS/NZS 2312:2002 | Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings |
| AS 1856-2004 | Electroplated coatings - Silver |
| AS 2429-2004 | Electroplated coatings of rhodium for general engineering applications |
| AS 2871-1988 | Solvents - 1,1,1-Trichloroethane (inhibited) |
| AS 4361.1-1995 | Guide to lead paint management - Industrial applications |
| AS/NZS 5131:2016 | Structural steelwork - Fabrication and erection |
| AS 1627.2-2002 | Metal finishing - Preparation and pretreatment of surfaces Power tool cleaning (Reconfirmed 2017) |
| AS 1627.9-2002 | Metal finishing - Preparation and pretreatment of surfaces Pictorial surface preparation standards for painting steel surfaces (Reconfirmed 2017) |
| AS 1627.4-2005 | Metal finishing - Preparation and pretreatment of surfaces Abrasive blast cleaning of steel (Reconfirmed 2017) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.