AS 1410-2003
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Sterilizers - Steam - Pre-vacuum
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
30-06-2017
English
01-01-2003
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Specifies requirements for fully automatic jacketed pre-vacuum steam sterilizers that operate at a sterilizing temperature of 134 degrees Celsius and are intended for use in hospitals and other non-industrial applications for the sterilization of porous loads, and instruments and utensils wrapped in porous material. The sterilizers are not intended for the sterilization of fluids, installation in areas associated with the use of flammable anaesthetics or volatile liquids, or downward-displacement cycles, unless they also comply with AS 2192.
| Committee |
ME-003
|
| DocumentType |
Standard
|
| ISBN |
0 7337 5002 8
|
| Pages |
55
|
| ProductNote |
Withdrawn 30-01-2017.
|
| PublisherName |
Standards Australia
|
| Status |
Withdrawn
|
| Supersedes |
This Standard specifies requirements for fully-automatic jacketed pre-vacuum steam sterilizers that operate at a sterilizing temperature of 134°C and are intended for use in hospitals and other non-industrial applications for the sterilization of porous loads, and instruments and utensils wrapped in porous material. The sterilizers are not intended for— (a) sterilization of fluids; (b) installation in areas associated with the use of flammable anaesthetics or volatile liquids (see AS 1169); or (c) downward-displacement cycles, unless the sterilizer also complies with AS 2192. NOTES: 1 A sterilizer may be required to operate at a minimum of 121°C for a specific purpose. Refer to AS 4187 for sterilizer time/temperature relationships. 2 Guidance on information to be supplied with enquiries and orders is given in Appendix A. 3 Information on quality of water is given in Appendix B. 4 Information on steam supplies is given in Appendix C 5 Standards for machines that wash, sterilize or dry medical equipment in health care facilities are listed in Appendix D.
First published as AS 1410-1973.
Second edition 1981.
Third edition 1987.
Fourth edition 2003.
| AS/NZS 1167.2:1999 | Welding and brazing - Filler metals Filler metal for welding |
| AS 1627.5-2003 | Metal finishing - Preparation and pretreatment of surfaces Pickling (Reconfirmed 2017) |
| AS 1858.2-1989 | Electrodes and fluxes for submerged-arc welding - Low and intermediate alloy steels |
| AS 1210-1997 | Pressure vessels |
| AS/NZS 1044:1995 | Limits and methods of measurement of radio disturbance characteristics of electrical motor-operated and thermal appliances for household and similar purposes, electric tools and similar electric apparatus |
| AS/NZS 4680:2006 | Hot-dip galvanized (zinc) coatings on fabricated ferrous articles (Reconfirmed 2017) |
| AS 1271-1997 | Safety valves, other valves, liquid level gauges, and other fittings for boilers and unfired pressure vessels |
| AS/NZS 2717.1:1996 | Welding - Electrodes - Gas metal arc - Ferritic steel electrodes |
| AS/NZS 4187:2003 | Cleaning, disinfecting and sterilizing reusable medical and surgical instruments and equipment, and maintenance of associated environments in health care facilities |
| AS/NZS ISO 9001:2000 | Quality management systems - Requirements |
| AS 4187-1998 | Cleaning, disinfecting and sterilizing reusable medical and surgical instruments and equipment, and maintenance of associated environments in health care facilities |
| AS/NZS 1553.1:1995 | Covered electrodes for welding - Low carbon steel electrodes for manual metal-arc welding of carbon steels and carbon-manganese steels |
| AS/NZS 4680:1999 | Hot-dip galvanized (zinc) coatings on fabricated ferrous articles |
| AS 4041-2006 | Pressure piping (Reconfirmed 2016) |
| AS 1192-2004 | Electroplated coatings - Nickel and chromium (Reconfirmed 2017) |
| AS/NZS 3947.5.1:2000 | Low-voltage switchgear and controlgear Control circuit devices and switching elements - Electromechanical control circuit devices |
| AS/NZS 3100:2002 | Approval and test specification - General requirements for electrical equipment |
| AS/NZS 1553.2:1999 | Covered electrodes for welding - Low and intermediate alloy steel electrodes for manual metal-arc welding of carbon steels and low and intermediate alloy steels |
| AS 1217.7-1985 | Acoustics - Determination of sound power levels of noise sources - Survey method |
| AS/NZS 1167.1:2005 | Welding and brazing - Filler metals Filler metal for brazing and braze welding |
| AS 1271-2003 | Safety valves, other valves, liquid level gauges and other fittings for boilers and unfired pressure vessels (Reconfirmed 2016) |
| AS/NZS ISO 9004:2000 | Quality management systems - Guidelines for performance improvements |
| AS 1192-1982 | Electroplated coatings - Nickel and chromium |
| AS 2717.2-1988 | Welding - Electrodes - Gas metal arc Aluminium and aluminium alloy |
| AS 1081.2-1990 | Acoustics - Measurements of airborne noise emitted by rotating electrical machinery Survey method |
| AS 4041-1998 | Pressure piping |
| AS 1349-1986 | Bourdon tube pressure and vacuum gauges (Reconfirmed 2018) |
| AS 2192-2002 | Sterilizers - Steam - Downward-displacement |
| AS 4426-1997 | Thermal insulation of pipework, ductwork and equipment - Selection, installation and finish (Reconfirmed 2018) |
| AS 1449-1994 | Wrought alloy steels - Stainless and heat-resisting steel plate, sheet and strip |
| AS 1167.1-1993 | Welding and brazing - Filler metals Filler metal for brazing and braze welding |
| AS 1169-1982 | Minimizing of combustion hazards arising from the medical use of flammable anaesthetic agents |
| AS 1199-1988 | Sampling procedures and tables for inspection by attributes |
| AS 1399-1990 | Guide to AS 1199 - Sampling procedures and tables for inspection by attributes |
| HB 18.28-2005 | Conformity assessment - Guidance on a third-party certification system for products |
| AS 3789.6-1996 | Textiles for health care facilities and institutions Fabric specifications |
| AS 2203.1-1990 | Cored electrodes for arc-welding Ferritic steel electrodes |
| AS 1722.1-1975 | Pipe threads of Whitworth form Sealing pipe threads (metric units) |
| AS 1858.1-1986 | Electrodes and fluxes for submerged-arc welding Carbon steels and carbon-manganese steels |
| AS 4260-1997 | High efficiency particulate air (HEPA) filters - Classification, construction and performance (Reconfirmed 2018) |
| AS 3789.2-1991 | Textiles for health care facilities and institutions Theatre linen and pre-packs |
| AS 1858.1-2003 | Electrodes and fluxes for submerged-arc welding Carbon steels and carbon-manganese steels |
| AS 1627.5-1994 | Metal finishing - Preparation and pretreatment of surfaces - Pickling, descaling and oxide removal |
| HB 18.28-1991 | Guidelines for third-party certification and accreditation - Guide 28: General rules for a model third-party certification system for products |
| AS/NZS 4187:2003 | Cleaning, disinfecting and sterilizing reusable medical and surgical instruments and equipment, and maintenance of associated environments in health care facilities |
| AS/NZS 2243.3:2002 | Safety in laboratories Microbiological aspects and containment facilities |
| AS 4125.1-2009 | Sound laboratory practice in food and water microbiology laboratories - Premises, safety, sample management, regulatory compliance and record management |
| AS/NZS 1200:2000 | Pressure equipment |
| AS 1079.4-1988 | Packaging of items (sterile) for patient care Flexible packaging systems - For single use in hospitals |
| AS/NZS 2243.3:2010 | Safety in laboratories Microbiological safety and containment |
| AS 1079.3-1994 | Packaging of items (sterile) for patient care Paper bags - For single use in health care facilities |
| AS 1079.1-1993 | Packaging of items (sterile) for patient care - Selection of packaging materials for goods undergoing sterilization |
| AS/NZS 4815:2006 | Office-based health care facilities - Reprocessing of reusable medical and surgical instruments and equipment, and maintenance of the associated environment |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.