• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

AS 1379-2007

Current

Current

The latest, up-to-date edition.

Specification and supply of concrete (Reconfirmed 2017)

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Published date

20-09-2007

Preview
£79.35
Excluding VAT

Sets out minimum requirements for the materials, plant and equipment used in the supply of concrete; the production and, if applicable, the delivery of concrete in the plastic state; specifying, sampling, testing and compliance with specified properties of plastic and hardened concrete; and the uniformity of mixing.

Committee
BD-049
DocumentType
Standard
ISBN
0 7337 8395 3
Pages
42
ProductNote
Reconfirmed 18/12/2017.This standard has been reconfirmed in Australia in 2017 and remains current in New Zealand. Reconfirmation Notice 18/12/2017
PublisherName
Standards Australia
Status
Current
Supersedes
UnderRevision

This Standard sets out the minimum requirements for - (a) the materials, plant and equipment used in the supply of concrete;(b) the production and, if applicable, the delivery of concrete in the plastic state;(c) specifying, sampling, testing and compliance with specified properties of plastic and hardened concrete; and(d) the uniformity of mixing.This Standard applies to the supply of all concrete. It is not intended to apply to mortars or grouts.NOTES:1 Requirements for mortars for masonry construction are given in AS 3700 and the methods for sampling and testing mortars in AS 2701.2 Requirements for grouts to be used for the grouting of prestressing tendons in ducts are given in AS 3600.3 It is not intended that this Standard take precedence over existing Australian Standards for the manufacture of specific concrete products.4 For additional requirements specified by the customer, the applicable contract documents should be consulted.

Originated as AS (E)A502-1941.
Revised and redesignated as AS 1379-1991.
Second edition 1997.
Third edition 2007.
Reissued incorporating Amendment No. 1 (June 2009).
Reissued incorporating Amendment No. 2 (March 2015).

AS 1289.4.2.1-1997 Methods of testing soils for engineering purposes Soil chemical tests - Determination of the sulfate content of a natural soil and the sulfate content of the groundwater - Normal method
AS 3972-1997 Portland and blended cements
AS/NZS 3582.3:2002 Supplementary cementitious materials for use with portland and blended cement Amorphous silica
AS/NZS 1580.505.1:1996 Paints and related materials - Methods of test pH of water-based paints (Reconfirmed 2013)
AS 1012.5-1999 Methods of testing concrete Determination of mass per unit volume of freshly mixed concrete
AS 2758.1-1998 Aggregates and rock for engineering purposes - Concrete aggregates
AS 1012.9-1999 Methods of testing concrete Determination of the compressive strength of concrete specimens
AS 1012.4.1-1999 Methods of testing concrete Determination of air content of freshly mixed concrete - Measuring reduction in concrete volume with increased air pressure
AS 3582.1-1998 Supplementary cementitious materials for use with portland and blended cement Fly ash
AS 1012.20-1992 Methods of testing concrete Determination of chloride and sulfate in hardened concrete and concrete aggregates
AS 1012.11-2000 Methods of testing concrete Determination of the modulus of rupture (Reconfirmed 2014)
AS 1012.13-1992 Methods of testing concrete Determination of the drying shrinkage of concrete for samples prepared in the field or in the laboratory
AS 1478.1-2000 Chemical admixtures for concrete, mortar and grout Admixtures for concrete (Reconfirmed 2018)
AS 1199.0-2003 Sampling procedures for inspection by attributes Introduction to the ISO 2859 attribute sampling system (Reconfirmed 2016)
AS 1012.12.1-1998 Methods of testing concrete Determination of mass per unit volume of hardened concrete - Rapid measuring method (Reconfirmed 2014)
AS 1012.10-2000 Methods of testing concrete Determination of indirect tensile strength of concrete cylinders ('Brazil' or splitting test) (Reconfirmed 2014)
AS 1012.8.2-2000 Methods of testing concrete Method for making and curing concrete - Flexure test specimens
AS 3700-2001 Masonry structures
AS 3550.4-1990 Waters Determination of solids - Gravimetric method
AS 1012.18-1996 Methods of testing concrete Determination of setting time of fresh concrete, mortar and grout by penetration resistance (Reconfirmed 2014)
AS/NZS ISO 9001:2000 Quality management systems - Requirements
AS 3600-2001 Concrete structures
AS 1141.6.1-2000 Methods for sampling and testing aggregates Particle density and water absorption of coarse aggregate - Weighing-in-water method (Reconfirmed 2016)
AS 1012.3.1-1998 Methods of testing concrete Determination of properties related to the consistency of concrete - Slump test
AS 1012.2-1994 Methods of testing concrete Preparation of concrete mixes in the laboratory
AS 1141.35-2007 Methods for sampling and testing aggregates Sugar
AS 1012.1-1993 Methods of testing concrete Sampling of fresh concrete
AS 1199.1-2003 Sampling procedures for inspection by attributes Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Reconfirmed 2016)
AS/NZS ISO 9004:2000 Quality management systems - Guidelines for performance improvements
AS 3600 SUPP 1-1994 Concrete structures - Commentary (Supplement to AS 3600-1994)
HB 18.28-2005 Conformity assessment - Guidance on a third-party certification system for products
AS 1012.8.1-2000 Methods of testing concrete Method for making and curing concrete - Compression and indirect tensile test specimens
HB 79-1996 Alkali Aggregate reaction - Guidelines on Minimising the Risk of Damage to Concrete Structures in Australia
AS 2701-2001 Methods of sampling and testing mortar for masonry construction (Reconfirmed 2015)
AS 3582.2-2001 Supplementary cementitious materials for use with portland and blended cement Slag - Ground granulated iron blast-furnace
AS 3700 SUPP 1-2004 Masonry structures - Commentary (Supplement to AS 3700-2001)

AS 1281-2001 Cement mortar lining of steel pipes and fittings (Reconfirmed 2018)
AS 3735-2001 Concrete structures for retaining liquids
AS/NZS 3845.2:2017 Road safety barrier systems and devices Road safety devices
AS 1085.14-2012 Railway track material Prestressed concrete sleepers
AS 2870-1996 Residential slabs and footings - Construction
AS/NZS 3500.4:2015 Plumbing and drainage Heated water services
AS/NZS 3500.2:2018 Plumbing and drainage Sanitary plumbing and drainage
AS 1597.1-2010 Precast reinforced concrete box culverts Small culverts (not exceeding 1200 mm span and 1200 mm height)
AS/NZS 1546.1:2008 On-site domestic wastewater treatment units Septic tanks
AS 2159-1995 Piling - Design and installation
AS/NZS 3500.1:2018 Plumbing and drainage Water Services
AS 3600-2001 Concrete structures
AS 4425-1996 Above ground burial structures
AS 4139-2003 Fibre-reinforced concrete pipes and fittings (Reconfirmed 2018)
AS 1597.2-2013 Precast reinforced concrete box culverts Large culverts (exceeding 1200 mm span or 1200 mm height and up to and including 4200 mm span and 4200 mm height)
AS/NZS 4677:2010 Steel utility services poles
HB 84-2006 Guide to Concrete Repair and Protection
AS 2876-2000 Concrete kerbs and channels (gutters) - Manually or machine placed
AS 3990-1993 Mechanical equipment - Steelwork (Reconfirmed 2016)
AS/NZS 3500.5:2012 Plumbing and drainage Housing installations
AS/NZS 3500.5:2012 Plumbing and drainage Housing installations
AS/NZS 3725:2007 Design for installation of buried concrete pipes
AS 3958.1-2007 Ceramic tiles Guide to the installation of ceramic tiles
AS/NZS 4058:2007 Precast concrete pipes (pressure and non-pressure)
AS 2870-2011 Residential slabs and footings
AS/NZS 1314:2003 Prestressing anchorages (Reconfirmed 2016)
AS/NZS 3500.4:2003 Plumbing and drainage Heated water services
AS/NZS 3500.2:2003 Plumbing and drainage Sanitary plumbing and drainage
AS/NZS 3500.2.2:1996 National plumbing and drainage Sanitary plumbing and drainage - Acceptable solutions
AS 2159-2009 Piling - Design and installation
AS/NZS 4065:2010 Concrete utility services poles
AS 2758.1-1998 Aggregates and rock for engineering purposes - Concrete aggregates
AS 5216:2018 Design of post-installed and cast-in fastenings in concrete
AS/NZS 3500.3:2003 Plumbing and drainage Stormwater drainage
AS 1085.14-2003 Railway track material Prestressed concrete sleepers
AS 1012.19-1988 Methods of testing concrete Accelerated curing of concrete compression test specimens (laboratory or field) - Hot water and warm water methods
AS 1012.17-1997 Methods of testing concrete Determination of the static chord modulus of elasticity and Poisson’s ratio of concrete specimens (Reconfirmed 2014)
AS 1012.1-1993 Methods of testing concrete Sampling of fresh concrete
AS 3600:2018 Concrete structures
AS/NZS 3500.3:2018 Plumbing and drainage Stormwater drainage
AS 2327.1-2003 Composite structures Simply supported beams
AS 5100.5:2017 Bridge design Concrete
AS 4198-1994 Precast concrete access chambers for sewerage applications
AS 2049-2002 Roof tiles (Reconfirmed 2015)
AS 3600-2009 Concrete structures
AS/NZS 3500.4:2018 Plumbing and drainage Heated water services
AS 1012.14:2018 Methods of testing concrete Method for securing and testing cores from hardened concrete for compressive strength and mass per unit volume
AS 3996:2019 Access covers and grates
AS/NZS 2327:2017 Composite structures - Composite steel-concrete construction in buildings
AS 1735.1-2003 Lifts, escalators and moving walks General requirements
AS/NZS 3500.1:2003 Plumbing and drainage Water services
AS 1597.2-1996 Precast reinforced concrete box culverts Large culverts (from 1500 mm span and up to and including 4200 mm span and 4200 mm height)
AS 3727.1:2016 Pavements Residential
AS/NZS 3500.3:2015 Plumbing and drainage Stormwater drainage
AS 3996-2006 Access covers and grates

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.