AS 1357.1-2004
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Valves primarily for use in heated water systems Protection valves
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
23-05-2024
01-01-2004
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Sets out requirements for the design, construction, testing and performance of the following types of valves within the range of DN 15 to DN 50; a. Temperature-pressure relief valves; b. Expansion control valves; c. Non-return valves; d. Temperature relief valves; e. Combination high pressure expansion non-return valves.
| Committee |
WS-026
|
| DocumentType |
Standard
|
| ISBN |
0 7337 5630 1
|
| Pages |
80
|
| PublisherName |
Standards Australia
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes | |
| UnderRevision |
This Standard sets out requirements for the design, construction, testing and performance of the following types of valves, within the range of DN 15 to DN 50:(a) Temperature/pressure-relief valves.(b) Expansion-control valves.(c) Non-return valves.(d) Temperature-relief valves. (e) Combination high-pressure expansion non-return valves (HPNR). The valves specified in this Standard are primarily intended for use in warm and hot water systems that are required to operate at— (a) continuous operating temperatures not exceeding 85°C; (b) temperatures under emergency conditions, not exceeding 99°C; and (c) continuous working pressure not exceeding 1400 kPa. NOTE: For valves used with water heaters, which are intended to operate at temperatures above 99°C (e.g. hot water boilers), see AS 1271. Means for demonstrating compliance with this Standard are given in Appendix A.
First published as part of AS B271-1968.
Revised and redesignated AS 1357-1972.
Revised and redesignated in part as AS 1357.1-1988.
Second edition 1992.
Third edition 2004.
| AS 1646.2-2000 | Elastomeric seals for waterworks purposes Material requirements for pipe joint seals used in water and wastewater applications - Specifies by prescription formulation |
| AS 1167.1-1993 | Welding and brazing - Filler metals Filler metal for brazing and braze welding |
| AS/NZS 1568:1998 | Copper and copper alloys - Forging stock and forgings |
| AS 1432-2004 | Copper tubes for plumbing, gasfitting and drainage applications |
| AS 1565-1996 | Copper and copper alloys - Ingots and castings (Reconfirmed 2020) |
| AS 2345-1992 | Dezincification resistance of copper alloys |
| HB 18.28-2005 | Conformity assessment - Guidance on a third-party certification system for products |
| AS/NZS 4020:2005 | Testing of products for use in contact with drinking water |
| AS 1722.1-1975 | Pipe threads of Whitworth form Sealing pipe threads (metric units) |
| AS 1568-1985 | Copper and copper alloys - Forging stock and forgings |
| AS 1199.1-2003 | Sampling procedures for inspection by attributes Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Reconfirmed 2016) |
| AS/NZS 3500.0:2003 | Plumbing and drainage Glossary of terms |
| AS/NZS 1167.1:2005 | Welding and brazing - Filler metals Filler metal for brazing and braze welding |
| AS/NZS 4020:2002 | Testing of products for use in contact with drinking water |
| AS 1271-2003 | Safety valves, other valves, liquid level gauges and other fittings for boilers and unfired pressure vessels (Reconfirmed 2016) |
| AS 2738-2000 | Copper and copper alloys - Compositions and designations of refinery products, wrought products, ingots and castings (Reconfirmed 2018) |
| AS/NZS ISO 9004:2000 | Quality management systems - Guidelines for performance improvements |
| AS 1572-1998 | Copper and copper alloys - Seamless tubes for engineering purposes (Reconfirmed 2018) |
| AS 2136-1977 | Method for detecting the susceptibility of copper and its alloys to stress corrosion cracking using the mercurous nitrate test (Reconfirmed 2018) |
| MP 52-2005 | Manual of authorization procedures for plumbing and drainage products |
| AS 1349-1986 | Bourdon tube pressure and vacuum gauges (Reconfirmed 2018) |
| AS 3688-1994 | Water supply - Copper and copper alloy body compression and capillary fittings and threaded-end connectors |
| AS 2837-1986 | Wrought alloy steels - Stainless steel bars and semi-finished products |
| AS 1432-1996 | Copper tubes for plumbing, gasfitting and drainage applications |
| AS 3688-2005 | Water supply - Metallic fittings and end connectors |
| AS 1722.2-1992 | Pipe threads of Whitworth form Fastening pipe threads (Reconfirmed 2017) |
| AS 1834.1-1991 | Material for soldering Solder alloys (Reconfirmed 2018) |
| AS 2345-2006 | Dezincification resistance of copper alloys |
| HB 18.28-1991 | Guidelines for third-party certification and accreditation - Guide 28: General rules for a model third-party certification system for products |
| AS 1567-1985 | Copper and copper alloys - Wrought rods, bars and sections |
| AS/NZS ISO 9001:2000 | Quality management systems - Requirements |
| AS/NZS 1567:1997 | Copper and copper alloys - Wrought rods, bars and sections (Reconfirmed 2021) |
| MP 52-2001 | Manual of authorization procedures for plumbing and drainage products |
| AS 5200.000-2006 | Technical specification for plumbing and drainage products Procedures for certification of plumbing and drainage products (Reconfirmed 2018) |
| AS 5601-2004 | Gas installations |
| AS 3814-2005 | Industrial and commercial gas-fired appliances |
| AS/NZS 4692.1:2005 | Electric water heaters Energy consumption, performance and general requirements (Reconfirmed 2016) |
| AS/NZS 3500.4:2003 | Plumbing and drainage Heated water services |
| MP 52-2005 | Manual of authorization procedures for plumbing and drainage products |
| AS 1357.2-2005 | Valves primarily for use in heated water systems Control valves (Reconfirmed 2015) |
| AS 2658-2008 | LP Gas - Portable and mobile appliances |
| AS 5200.000-2005 | Technical specification for plumbing and drainage products Procedures for certification of plumbing and drainage products |
| SAA/SNZ HB32:1995 | Control of microbial growth in air-handling and water systems in buildings (Reconfirmed 2016) |
| ATS 5200.481-2006 | Technical Specification for plumbing and drainage products Thermal switching valves |
| AS 4552-2005 | Gas fired water heaters for hot water supply and/or central heating |
| ATS 5200.052-2005 | Metallic-bodied inlet pressure control valves greater than DN 50 |
| AS 3498-2003 | Authorization requirements for plumbing products - Water heaters and hot-water storage tanks |
| AS 4560-2004 | Gas pool heaters (Reconfirmed 2016) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.