AS 1228-1997
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Pressure equipment - Boilers
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
23-05-2024
01-01-1997
Important note : All end users must be registered with an Account prior to user licenses being assigned.
This Standard sets out requirements for materials, design, construction, inspection and testing of boilers as defined in AS/NZS 1200. Specifically applies to design and construction of boilers including superheaters, reheaters and economizers. Incorporates the existing AS 1228-1990, Boilers-Water-tube, and AS 1797-1986, Boilers-Fire-tube, shell and miscellaneous, into one document. This incorporation eliminates duplication and possible conflict when considering the core documents for the Pressure Equipment suite of Standards.
| Committee |
ME-001
|
| DocumentType |
Standard
|
| ISBN |
0 7337 1006 9
|
| Pages |
218
|
| PublisherName |
Standards Australia
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes | |
| UnderRevision |
This Standard sets out requirements for materials, design, construction, inspection and testing of boilers as defined in AS/NZS 1200.NOTE: The Scope of this Standard covers requirements for cast iron in addition to welded boilers inclusive of vapour-generating and hot fluid units subject to internal vapour or liquid pressure. Other forms of construction should be by agreement between the parties concerned.This Standard specifically applies to design and construction of boilers including superheaters, reheaters and economizers. It also applies to all pressure parts containing fluid up to and including the valves separating the pressure parts from -(a) steam piping to and from other equipment; (b) water piping to and from other equipment; (c) drain piping; (d) the surrounding atmosphere, except that for safety valves, their vent piping to the atmosphere is also covered; and (e) for equipment such as reheaters which may not incorporate valves at their supply and return connection points, the Standard applies to the equipment included between the inlet to the inlet header and the outlet from the outlet header of such equipment.
First published in Australia in part as AS B31-1931.
AS CB1 first published 1932.
Redated 1932.
Redated 1939.
Second edition 1942.
Redated 1950.
AS CB1.5 first published 1951.
AS CB1-1950 redated 1952.
AS B31-1931 incorporated into AS CB1-1952 as Amendment.
AS CB1-1952 redated 1954.
AS CB1.5-1951 redated 1954.
AS CB1-1954 revised and redesignated in part as AS CB1.1-1962 and AS 1228-1972.
AS CB1.5-1954 revised and redesignated in part as AS 1228-1972.
AS CB1.1-1962 revised and redesignated as AS 1797-1975 and AS 1797-1978.
Second edition AS 1228-1980.
Third edition AS 1797-1981.
Third edition AS 1228-1984.
Fourth edition AS 1797-1986.
Fourth edition AS 1228-1990.
AS 1797-1986 and AS 1228-1990 revised, amagamated and designated AS 1228-1997.
| AS 2291-1979 | Methods for tensile testing of metals at elevated temperatures |
| AS 4037-1999 | Pressure equipment - Examination and testing (Reconfirmed 2016) |
| AS 1680.1-1990 | Interior lighting General principles and recommendations |
| AS 3990-1993 | Mechanical equipment - Steelwork (Reconfirmed 2016) |
| AS 1271-1997 | Safety valves, other valves, liquid level gauges, and other fittings for boilers and unfired pressure vessels |
| AS 3992-1992 | Boilers and pressure vessels - Welding and brazing qualification |
| AS 3873-1995 | Pressure equipment - Operation and maintenance |
| AS 2528-1982 | Bolts, studbolts and nuts for flanges and other high and low temperature applications |
| AS/NZS 3678:1996 | Structural steel - Hot-rolled plates, floorplates and slabs |
| AS/NZS 3679.1:1996 | Structural steel Hot-rolled bars and sections |
| AS 1722.1-1975 | Pipe threads of Whitworth form Sealing pipe threads (metric units) |
| AS 4041-1998 | Pressure piping |
| AS/NZS 3679.2:1996 | Structural steel Welded I sections |
| AS 4458-1997 | Pressure equipment - Manufacture (Reconfirmed 2016) |
| AS 3653-1993 | Boilers - Safety, management, combustion and other ancillary equipment |
| AS 1000-1979 | The International System of Units (SI) and its application |
| AS/NZS 1110:1995 | ISO metric precision hexagon bolts and screws |
| AS 1029.1-1985 | Low voltage contactors - Electromechanical (up to and including 1000 V a.c. and 1200 V d.c.) |
| AS 2074-1982 | Steel castings |
| AS 2129-1994 | Flanges for pipes, valves and fittings |
| AS 1710-1986 | Non-destructive testing - Ultrasonic testing of carbon and low alloy steel plate - Test methods and quality classification |
| AS 1210-1989 | |
| AS 1237-1973 | Flat metal washers - For general engineering purposes (metric series) |
| AS 3000-1986 | Electrical installations - Buildings, structures and premises (known as the SAA Wiring Rules) |
| AS 3920.1-1993 | Assurance of product quality Pressure equipment manufacture |
| AS 3892-1995 | Pressure equipment - Installation |
| AS 1074-1989 | Steel tubes and tubulars for ordinary service (Reconfirmed 2018) |
| AS/NZS 1112:1996 | ISO metric hexagon nuts, including thin nuts, slotted nuts and castle nuts |
| AS/NZS 1200:1994 | Pressure equipment |
| AS 1548-1995 | Steel plates for pressure equipment |
| AS/NZS 1596:2002 | The storage and handling of LP Gas |
| AS 3873-1995 | Pressure equipment - Operation and maintenance |
| AS 2865-1995 | Safe working in a confined space |
| AS 2593-2004 | Boilers - Safety management and supervision systems (Reconfirmed 2016) |
| AS 3892-2001 | Pressure equipment - Installation (Reconfirmed 2016) |
| AS 3653-1993 | Boilers - Safety, management, combustion and other ancillary equipment |
| AS 2780-1999 | Refractories and refractory materials - Glossary of terms |
| AS 3961-2005 | The storage and handling of liquefied natural gas |
| AS 1796-2001 | Certification of welders and welding supervisors (Reconfirmed 2016) |
| AS/NZS 1200:2000 | Pressure equipment |
| AS 4037-1992 | Boilers and pressure vessels - Examination and testing |
| AS 1796-1993 | Certification of welders and welding supervisors |
| AS 2593-1995 | Boilers - Unattended and limited attendance |
| AS 4041-2006 | Pressure piping (Reconfirmed 2016) |
| HB 213:2003 | Guidelines for safe working in a confined space |
| AS 3992-1992 | Boilers and pressure vessels - Welding and brazing qualification |
| AS/NZS 1200:1994 | Pressure equipment |
| MP 52-1997 | Manual of authorization procedures for plumbing and drainage products |
| AS/NZS 3788:1996 | Pressure equipment - In-service inspection |
| AS 4041-1992 | Pressure piping |
| AS 4037-1999 | Pressure equipment - Examination and testing (Reconfirmed 2016) |
| AS 3533.1-1997 | Amusement rides and devices Design and construction |
| AS/NZS 2865:2001 | Safe working in a confined space |
| AS 3533.2-1997 | Amusement rides and devices Operation and maintenance |
| AS 3873-2001 | Pressure equipment - Operation and maintenance |
| AS 3920.1-1993 | Assurance of product quality Pressure equipment manufacture |
| ATS 5200.105-2005 | |
| AS/NZS 3788:2006 | Pressure equipment - In-service inspection (Reconfirmed 2017) |
| AS 3857-1999 | Heat exchangers - Tubeplates - Method of design (Reconfirmed 2016) |
| AS 2593-2001 | Boilers - Unattended and limited attendance |
| AS 1210-1997 | Pressure vessels |
| AS 3961-1991 | Liquefied natural gas - Storage and handling |
| MP 52-2001 | Manual of authorization procedures for plumbing and drainage products |
| AS 2780-2003 | Refractories and refractory materials - Glossary of terms (Reconfirmed 2013) |
| AS 4458-1997 | Pressure equipment - Manufacture (Reconfirmed 2016) |
| AS/NZS 3788:2001 | Pressure equipment - In-service inspection |
| AS 3892-1995 | Pressure equipment - Installation |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.