AS 1138-2008
Current
The latest, up-to-date edition.
Thimbles for wire rope (Reconfirmed 2019)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
23-01-2008
Specifies requirements for thimbles that are suitable for use with Grade1770, galvanized or ungalvanized, round strand, equal lay, 6 (36 or 6) 19 construction groups Seale-Warrington+IWRC steel wire ropes.
Committee |
ME-025
|
DocumentType |
Standard
|
ISBN |
0 7337 8515 8
|
Pages |
15
|
ProductNote |
Reconfirmation Notice 01/02/2019 Reconfirmed 01/02/2019.
This standard has been reconfirmed in Australia in 2019 and remains current in New Zealand. |
PublisherName |
Standards Australia
|
Status |
Current
|
Supersedes |
This Standard specifies requirements for thimbles that are suitable for use with Grade 1770, galvanized or ungalvanized, round strand, equal lay, 6 ( 36 or 6 ( 19 construction groups Seale-Warrington + IWRC steel wire ropes.Thimbles suitable or higher capacity wire ropes are included.NOTES:1 This Standard does not prevent the use of these or other types of thimble with fibre rope.2 Guidance on information that should be supplied with enquiries and orders is given in Appendix A.3 Standards for components that are used in lifting systems are listed in Appendix B.
Originated as AS 1138-1978.
Second edition 1992.
Third edition 2008.
AS 14443.1-2003 | Identification cards - Contactless integrated circuit(s) cards - Proximity cards Physical characteristics (Reconfirmed 2016) |
AS 1831-2007 | Ductile cast iron (Reconfirmed 2017) |
AS 14443.4-2003 | Identification cards - Contactless integrated circuit(s) cards - Proximity cards Transmission protocol (Reconfirmed 2016) |
AS/NZS 1595:1998 | Cold-rolled, unalloyed, steel sheet and strip (Reconfirmed 2016) |
AS 1627.0-1997 | Metal finishing - Preparation and pretreatment of surfaces Method selection guide (Reconfirmed 2017) |
AS/NZS 4680:2006 | Hot-dip galvanized (zinc) coatings on fabricated ferrous articles (Reconfirmed 2017) |
AS 1199.1-2003 | Sampling procedures for inspection by attributes Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Reconfirmed 2016) |
AS/NZS 3678:1996 | Structural steel - Hot-rolled plates, floorplates and slabs |
AS 1627.6-2003 | Metal finishing - Preparation and pretreatment of surfaces Chemical conversion treatment of metals (Reconfirmed 2017) |
HB 18.28-2005 | Conformity assessment - Guidance on a third-party certification system for products |
AS/NZS 3679.1:1996 | Structural steel Hot-rolled bars and sections |
AS 1789-2003 | Electroplated zinc (electrogalvanized) coatings on ferrous articles (batch process) (Reconfirmed 2017) |
AS 1190-1972 | Photometric data on luminaires for interior lighting |
AS 2074-2003 | Cast steels |
AS 1443-2004 | Carbon and carbon-manganese steel - Cold finished bars (Reconfirmed 2022) |
AS 14443.2-2003 | Identification cards - Contactless integrated circuit(s) cards - Proximity cards Radio frequency power and signal interface (Reconfirmed 2016) |
AS 1442-2007 | Carbon steels and carbon-manganese steels - Hot rolled bars and semifinished products (Reconfirmed 2017) |
AS 14443.3-2003 | Identification cards - Contactless integrated circuit(s) - Proximity cards Initialization and anticollision (Reconfirmed 2016) |
AS/NZS ISO 9004:2000 | Quality management systems - Guidelines for performance improvements |
AS 1444-2007 | Wrought alloy steels - Standard, hardenability (H) series and hardened and tempered to designated mechanical properties (Reconfirmed 2017) |
AS 2193-2005 | Calibration and classification of force-measuring systems (Reconfirmed 2017) |
AS/NZS ISO 9001:2000 | Quality management systems - Requirements |
AS 3569-1989 | Steel wire ropes |
AS 1199.0-2003 | Sampling procedures for inspection by attributes Introduction to the ISO 2859 attribute sampling system (Reconfirmed 2016) |
AS 1446-1981 | Carbon steels and carbon-manganese steels - Hot-rolled slab, plate and strip based on chemical composition |
AS/NZS 4791:2006 | Hot-dip galvanized (zinc) coatings on ferrous open sections, applied by an in-line process (Reconfirmed 2017) |
AS 2550.1-2011 | Cranes, hoists and winches - Safe use General requirements |
AS 3585-2008 | End fittings for synthetic flat-webbing and round slings (Reconfirmed 2019) |
AS 1666.2-2009 | Wire-rope slings Care and use (Reconfirmed 2019) |
AS 3777-2008 | Shank hooks and large eye hooks - Maximum 60 t (Reconfirmed 2019) |
AS 2316.1-2009 | Artificial climbing structures and challenge courses Fixed and mobile artificial climbing and abseiling walls |
AS 1666.1-2009 | Wire-rope slings Product specification (Reconfirmed 2019) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.