API STD 17F : 2017
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
SUBSEA PRODUCTION CONTROL SYSTEMS
Amended by
Available format(s)
Hardcopy , PDF
Superseded date
10-06-2021
Superseded by
Language(s)
English
Published date
01-11-2017
Publisher
1 Scope
2 Normative References
3 Terms, Definitions, Acronyms,
Abbreviations, and Symbols
4 System Requirements
5 Surface Equipment
6 Subsea Equipment
7 Interfaces
8 Materials and Fabrication
9 Testing
10 Marking, Packaging, Storage,
and Shipping
Annex A (normative) - Obsolescence Management
Annex B (normative) - Subsea Electrical and
Optical Connectors and Flying Leads
Annex C (informative) - Property Requirements of
Control Fluids
Annex D (normative) - Analog Devices - SIIS Level 1
Annex E (normative) - Digital Serial Devices - SIIS
Level 2
Annex F (normative) - Intelligent Well Devices, IWIS
Annex G (normative) - Ethernet TCP/IP Devices - SIIS
Level 3
Annex H (normative) - Insulation Resistance (IR)
Testing
Bibliography
Pertains to design, fabrication, testing, installation, and operation of subsea production control systems (SPCSs).
| DocumentType |
Standard
|
| Pages |
241
|
| ProductNote |
NEW CHILD ERR 2 2019 IS ADDED This product is unavailable in Cuba, Iran, North Korea, Syria New child ERR 1 2018 is now added.
|
| PublisherName |
American Petroleum Institute
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| IEC 60270:2000+AMD1:2015 CSV | High-voltage test techniques - Partial discharge measurements |
| IEC TS 60479-1:2005+AMD1:2016 CSV | Effects of current on human beings and livestock - Part 1: Generalaspects |
| ASTM D 892 : 2013-07 | TEST METHOD FOR FOAMING CHARACTERISTICS OF LUBRICATING OILS |
| IEC 60228:2004 | Conductors of insulated cables |
| EI GUIDE MGMT. OBSOLESCENCE SUBSEA : 1ED 2011 | GUIDELINES FOR THE MANAGEMENT OF OBSOLESCENCE IN SUBSEA FACILITIES |
| ISO 9606-2:2004 | Qualification test of welders — Fusion welding — Part 2: Aluminium and aluminium alloys |
| ISO/TR 10949:2002 | Hydraulic fluid power Component cleanliness Guidelines for achieving and controlling cleanliness of components from manufacture to installation |
| ASME PV CODE 9 : 2017 | BOILER AND PRESSURE VESSEL CODE - WELDING, BRAZING, AND FUSING QUALIFICATIONS - QUALIFICATION STANDARD FOR WELDING, BRAZING, AND FUSING PROCEDURES; WELDERS; BRAZERS; AND WELDING, BRAZING, AND FUSING OPERATORS |
| ASTM D 665 : 2014-11 | TEST METHOD FOR RUST-PREVENTING CHARACTERISTICS OF INHIBITED MINERAL OIL IN THE PRESENCE OF WATER |
| ISO 15610:2003 | Specification and qualification of welding procedures for metallic materials — Qualification based on tested welding consumables |
| ASTM D 1141 : 1998 : EDT 1 | Standard Practice for the Preparation of Substitute Ocean Water |
| ASTM D 1414 : 2015 : REDLINE | Standard Test Methods for Rubber O-Rings |
| IEC 60502-1:2004+AMD1:2009 CSV | Power cables with extruded insulation and their accessories for rated voltages from 1 kV (<em>U</em><sub>m</sub> = 1,2 kV) up to 30 kV(<em>U</em><sub>m</sub> = 36 kV) - Part 1: Cables for rated voltages of 1 kV (<em>U</em><sub>m</sub> = 1,2 kV) and 3 kV (<em>U</em><sub>m</sub> = 3,6 kV) |
| ASME PV CODE 8 DIV 1 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1 |
| API 6A : 2010 | SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
| IEEE 802.3-2012 | IEEE Standard for Ethernet |
| TIA/EIA 568-2 : C2009 AMD 1 2016 | COMMERCIAL BUILDING TELECOMMUNICATIONS CABLING STANDARD - PART 2: BALANCED TWISTED-PAIR TELECOMMUNICATIONS CABLING AND COMPONENTS STANDARDS |
| IEC TS 62239:2008 | Process management for avionics - Preparation of an electronic components management plan |
| ISO/IEC 8802-3:2000 | Information technology Telecommunications and information exchange between systems Local and metropolitan area networks Specific requirements Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications |
| ASME B31.3:2016 | PROCESS PIPING |
| IEC 61000-4-4:2012 RLV | Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test |
| ISO 9606-1:2012 | Qualification testing of welders — Fusion welding — Part 1: Steels |
| PD 6667:2000 | Obsolescence management. Code of practice for obsolescence notification and support from suppliers of electronic components |
| BS 903-C2:1982 | Physical testing of rubber Determination of volume resistivity |
| ISO 15612:2004 | Specification and qualification of welding procedures for metallic materials Qualification by adoption of a standard welding procedure |
| ISO 15614-1:2017 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys |
| ISO 13357-2:2017 | Petroleum products — Determination of the filterability of lubricating oils — Part 2: Procedure for dry oils |
| ISO 1431-1:2012 | Rubber, vulcanized or thermoplastic Resistance to ozone cracking Part 1: Static and dynamic strain testing |
| ISO 11500:2008 | Hydraulic fluid power — Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle |
| ISO 15611:2003 | Specification and qualification of welding procedures for metallic materials — Qualification based on previous welding experience |
| BS 6899:1991 | Specification for rubber insulation and sheath of electric cables |
| IEC 60945:2002 | Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results |
| ISO 8580:1987 | Rubber and plastics hoses Determination of ultra-violet resistance under static conditions |
| ISO 3722:1976 | Hydraulic fluid power — Fluid sample containers — Qualifying and controlling cleaning methods |
| IEC 62402:2007 | Obsolescence management - Application guide |
| IEC 60721-3-2:1997 | Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 2: Transportation |
| IEC 61300-3-4:2012 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-4: Examinations and measurements - Attenuation |
| ASTM G 46 : 1994 : R2018 | Standard Guide for Examination and Evaluation of Pitting Corrosion |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| IEC 60533:2015 | Electrical and electronic installations in ships - Electromagnetic compatibility (EMC) - Ships with a metallic hull |
| BS 7201-2:1995 | Hydraulic fluid power. Gas loaded accumulators Dimensions of gas ports |
| IEC 62309:2004 | Dependability of products containing reused parts - Requirements for functionality and tests |
| BS EN 14359:2017 | Gas-loaded accumulators for fluid power applications |
| ISO 11898-3:2006 | Road vehicles Controller area network (CAN) Part 3: Low-speed, fault-tolerant, medium-dependent interface |
| ASME PV CODE 5 : 2017 | BOILER AND PRESSURE VESSEL CODE - NONDESTRUCTIVE EXAMINATION |
| API SPEC 17E : 2017 | SPECIFICATION FOR SUBSEA UMBILICALS |
| SAE AS 4059F : 2013 | AEROSPACE FLUID POWER - CONTAMINATION CLASSIFICATION FOR HYDRAULIC FLUIDS |
| ISO 15609-2:2001 | Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 2: Gas welding |
| ISO 21018-1:2008 | Hydraulic fluid power — Monitoring the level of particulate contamination of the fluid — Part 1: General principles |
| API 17Q : 2010 | RECOMMENDED PRACTICE ON SUBSEA EQUIPMENT QUALIFICATION |
| ISO 16889:2008 | Hydraulic fluid power Filters Multi-pass method for evaluating filtration performance of a filter element |
| DIN 41612-2:1987-10 | TWO-PART CONNECTORS FOR PRINTED BOARDS; GRID 2,54 MM; DIMENSIONS OF TYPES B, C AND D |
| ISO 15613:2004 | Specification and qualification of welding procedures for metallic materials Qualification based on pre-production welding test |
| IEC 60060-1:2010 | High-voltage test techniques - Part 1: General definitions and test requirements |
| AWS D1.1 : 2000 | STRUCTURAL WELDING CODE - STEEL |
| ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials General rules |
| ISO 10945:1994 | Hydraulic fluid power Gas-loaded accumulators Dimensions of gas ports |
| ISO 4021:1992 | Hydraulic fluid power — Particulate contamination analysis — Extraction of fluid samples from lines of an operating system |
| API 17O : 2014 | SUBSEA HIGH INTEGRITY PRESSURE PROTECTION SYSTEMS (HIPPS) |
| ISO 4405:1991 | Hydraulic fluid power — Fluid contamination — Determination of particulate contamination by the gravimetric method |
| API RP 17N : 2017 | RECOMMENDED PRACTICE ON SUBSEA PRODUCTION SYSTEM RELIABILITY, TECHNICAL RISK, AND INTEGRITY MANAGEMENT |
| ASTM D 471 : 2016-02 | TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS |
| API 17H : 2013 | REMOTELY OPERATED TOOLS AND INTERFACES ON SUBSEA PRODUCTION SYSTEMS |
| API 17D : 2011 | DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - SUBSEA WELLHEAD AND TREE EQUIPMENT |
| ISO 4407:2002 | Hydraulic fluid power — Fluid contamination — Determination of particulate contamination by the counting method using an optical microscope |
| IEC 60885-2:1987 | Electrical test methods for electric cables. Part 2: Partial discharge tests |
| EN 287-1:2011 | Qualification test of welders - Fusion welding - Part 1: Steels |
Important note : All end users must be registered with an Account prior to user licenses being assigned.Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Are you sure?
Logging out.