API MPM CH8.1 : 2013
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 8.1: STANDARD PRACTICE FOR MANUAL SAMPLING OF PETROLEUM AND PETROLEUM PRODUCTS
Available format(s)
Hardcopy , PDF
Superseded date
09-08-2019
Superseded by
Language(s)
English
Published date
01-10-2013
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1 Scope
2 Referenced Documents
3 Terminology
4 Significance and Use
5 Health and Safety Precautions
6 Apparatus
7 Sampling Devices/Equipment and Accessories
8 Manual Sampling Concepts and Objective
9 Sampling Requirements, Considerations, and Procedures
10 Special Instructions for Specific Products
11 Keywords
Appendix X1 (Nonmandatory Information) - Crude Oil Sample
Handling - Test Matrix
Describes procedures and equipment for manually obtaining samples of liquid petroleum and petroleum products, crude oils, and intermediate products from the sample point into the primary container
| DevelopmentNote |
Also numbered as ASTM D 4057. (03/2004) Also available in Spanish translation, see API MPM CH8.1 SPANISH. (09/2017)
|
| DocumentType |
Standard
|
| Pages |
56
|
| ProductNote |
This product is unavailable in Cuba, Iran, North Korea, Syria
|
| PublisherName |
American Petroleum Institute
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| API MPM CH17.2 : 1999 : R2006 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 17: MARINE MEASUREMENT - SECTION 2: MEASUREMENT OF CARGOES ON BOARD TANK VESSELS |
| API MPM CH10.1 : 2007(R2012) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 10: SEDIMENT AND WATER - SECTION 1: STANDARD TEST METHOD FOR SEDIMENT IN CRUDE OILS AND FUEL OILS BY THE EXTRACTION METHOD |
| API MPM CH3.6 : 2001 : R2011 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 3 - TANK GAUGING - SECTION 6 - MEASUREMENT OF LIQUID HYDROCARBONS BY HYBRID TANK MEASUREMENT SYSTEMS |
| API MPM CH10.8:2005 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 10: SEDIMENT AND WATER - SECTION 8: STANDARD TEST METHOD FOR SEDIMENT IN CRUDE OIL BY MEMBRANE FILTRATION |
| EI HM 51 : 2015 | PROCEDURES FOR BULK LIQUID CHEMICAL CARGO INSPECTIONS |
| API MPM CH3.6 : 2001 : INC : ERR 1 : 2005 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 3 - TANK GAUGING - SECTION 6 - MEASUREMENT OF LIQUID HYDROCARBONS BY HYBRID TANK MEASUREMENT SYSTEMS |
| ASTM D 473 : 2007 : R2012 | Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method |
| ASTM D 6822 : 2012 : REV B : R2017 | Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method |
| API MPM CH20.1 : 1993 : R2011 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 20 - ALLOCATION MEASUREMENT - SECTION 1 - ALLOCATION MEASUREMENT |
| API MPM CH10.5 : 2013 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 10.5: STANDARD TEST METHOD FOR WATER IN PETROLEUM PRODUCTS AND BITUMINOUS MATERIALS BY DISTILLATION |
| ASTM D 473 : 2007 : R2012 : EDT 1 | Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method |
| ASTM D 4807 : 2005 : EDT 1 | Standard Test Method for Sediment in Crude Oil by Membrane Filtration |
| ASTM D 4007 : 2011 : EDT 1 | Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure) |
| ASTM D 7829 : 2013 : EDT 1 | Standard Guide for Sediment and Water Determination in Crude Oil |
| ASTM D 5854 : 1996 : R2000 | Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products |
| ASTM D 1298 : 2012 : REV A | Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method |
| API MPM CH8.5 : 2015 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 8.5: STANDARD PRACTICE FOR MANUAL PISTON CYLINDER SAMPLING FOR VOLATILE CRUDE OILS, CONDENSATES, AND LIQUID PETROLEUM PRODUCTS |
| API MPM CH10.2 : 2016 | Determination of Water in Crude Oil by Distillation |
| API MPM CH10.1 : 2007 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 10: SEDIMENT AND WATER - SECTION 1: STANDARD TEST METHOD FOR SEDIMENT IN CRUDE OILS AND FUEL OILS BY THE EXTRACTION METHOD |
| API MPM CH16.2 : 1994 : R2012 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 16 - MEASUREMENT OF HYDROCARBON FLUIDS BY WEIGHT OR MASS - SECTION 2 - MASS MEASUREMENT OF LIQUID HYDROCARBONS IN VERTICAL CYLINDRICAL STORAGE TANKS BY HYDROSTATIC TANK GAUGING |
| API MPM CH10.7 : 2002(R2011) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 10 - SEDIMENT AND WATER - SECTION 7 - STANDARD TEST METHOD FOR WATER IN CRUDE OILS BY POTENTIOMETRIC KARL FISCHER TITRATION |
| API MPM CH10.6:2013 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 10.6: STANDARD TEST METHOD FOR WATER AND SEDIMENT IN FUEL OILS BY THE CENTRIFUGE METHOD (LABORATORY PROCEDURE) |
| API MPM CH3.6:2001 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 3 - TANK GAUGING - SECTION 6 - MEASUREMENT OF LIQUID HYDROCARBONS BY HYBRID TANK MEASUREMENT SYSTEMS |
| API MPM CH5.6:2002 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 5 - METERING - SECTION 6 - MEASUREMENT OF LIQUID HYDROCARBONS BY CORIOLIS METERS |
| API MPM CH5.6 : 2002 : R2008 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 5 - METERING - SECTION 6 - MEASUREMENT OF LIQUID HYDROCARBONS BY CORIOLIS METERS |
| EI HM 52 : 2009 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 17.11: MEASUREMENT AND SAMPLING OF CARGOES ON BOARD TANK VESSELS USING CLOSED AND RESTRICTED EQUIPMENT |
| API MPM CH6.6 : 1991 : R2007 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 6 - METERING ASSEMBLIES - SECTION 6 - PIPELINE METERING SYSTEMS |
| API MPM CH6.6 : 1991(R2017) | Metering Assemblies: Pipeline Metering Systems |
| API MPMS CH17.12 : 2015 | PROCEDURES FOR BULK LIQUID CHEMICAL CARGO INSPECTIONS |
| ASTM D 4807 : 2005 : R2010 | Standard Test Method for Sediment in Crude Oil by Membrane Filtration |
| API MPM CH17.2 : 1999 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 17: MARINE MEASUREMENT - SECTION 2: MEASUREMENT OF CARGOES ON BOARD TANK VESSELS |
| API MPM CH20.1 : 1993 : INC : ADD 1 : 2013 : R201100 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 20 - ALLOCATION MEASUREMENT - SECTION 1 - ALLOCATION MEASUREMENT |
| ASTM D 1796 : 2011 : R2016 | Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure) |
| API TR 2573 : 2013(R2018) | Standard Guide for Sediment and Water Determination in Crude Oil Standard Guide for Sediment and Water Determination in Crude Oil |
| API MPM CH17.11 : 2016 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS CHAPTER 17.11 - MEASUREMENT AND SAMPLING OF CARGOES ON BOARD TANK VESSELS USING CLOSED AND RESTRICTED EQUIPMENT - EL HYDROCARBON MANAGEMENT HM 52 |
| ASTM D 473 : 2007 | Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method |
| ASTM D 1298 : 2012 : REV B : R2017 | Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method |
| ASTM D 6822 : 2012 | Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method |
| ASTM D 4807 : 2005 : R2015 | Standard Test Method for Sediment in Crude Oil by Membrane Filtration |
| ASTM D 4377 : 2000 | Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration |
| API MPM CH10.3:2003 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 10.3: STANDARD TEST METHOD FOR WATER AND SEDIMENT IN CRUDE OIL BY THE CENTRIFUGE METHOD (LABORATORY PROCEDURE) |
| API MPM CH3.6 : 2001 : R2006 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 3 - TANK GAUGING - SECTION 6 - MEASUREMENT OF LIQUID HYDROCARBONS BY HYBRID TANK MEASUREMENT SYSTEMS |
| API MPM CH10.7:2002 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 10 - SEDIMENT AND WATER - SECTION 7 - STANDARD TEST METHOD FOR WATER IN CRUDE OILS BY POTENTIOMETRIC KARL FISCHER TITRATION |
| API MPM CH10.8 : 2005 : R2010 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 10: SEDIMENT AND WATER - SECTION 8: STANDARD TEST METHOD FOR SEDIMENT IN CRUDE OIL BY MEMBRANE FILTRATION |
| API MPMS CH17.8 : 2016 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 17.8: GUIDELINES FOR PRE-LOADING INSPECTION OF MARINE VESSEL CARGO TANKS AND THEIR CARGO-HANDLING SYSTEMS |
| API MPMS CH10.3 : 2013(R2016) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 10.3: STANDARD TEST METHOD FOR WATER AND SEDIMENT IN CRUDE OIL BY THE CENTRIFUGE METHOD (LABORATORY PROCEDURE) |
| API MPMS CH9.4 : 2018 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 9.4 - CONTINUOUS DENSITY MEASUREMENT UNDER DYNAMIC (FLOWING) CONDITIONS |
| API MPMS CH9.1 : 2012(R2017) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 9.1: STANDARD TEST METHOD FOR DENSITY, RELATIVE DENSITY, OR API GRAVITY OF CRUDE PETROLEUM AND LIQUID PETROLEUM PRODUCTS BY HYDROMETER METHOD |
| BS ISO 13739:2010 | Petroleum products. Procedures for transfer of bunkers to vessels CD-ROM |
| API 3000 : 2014 | CLASSIFYING AND LOADING OF CRUDE OIL INTO RAIL TANK CARS |
| API MPMS CH8.5 SPANISH : 2015 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 8.5: STANDARD PRACTICE FOR MANUAL PISTON CYLINDER SAMPLING FOR VOLATILE CRUDE OILS, CONDENSATES, AND LIQUID PETROLEUM PRODUCTS |
| API MPM CH3.1B : 2001(R2016) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 3 - TANK GAUGING - SECTION 1B - STANDARD PRACTICE FOR LEVEL MEASUREMENT OF LIQUID HYDROCARBONS IN STATIONARY TANKS BY AUTOMATIC TANK GAUGING |
| API MPM CH16.2 : 1994 : R2007 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 16 - MEASUREMENT OF HYDROCARBON FLUIDS BY WEIGHT OR MASS - SECTION 2 - MASS MEASUREMENT OF LIQUID HYDROCARBONS IN VERTICAL CYLINDRICAL STORAGE TANKS BY HYDROSTATIC TANK GAUGING |
| API MPM CH6.6 : 1991 : R2012 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 6 - METERING ASSEMBLIES - SECTION 6 - PIPELINE METERING SYSTEMS |
| API MPMS CH10.8 : 2005(R2015) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 10: SEDIMENT AND WATER - SECTION 8: STANDARD TEST METHOD FOR SEDIMENT IN CRUDE OIL BY MEMBRANE FILTRATION |
| API MPM CH5.2:2005 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 5 - METERING - SECTION 2 - MEASUREMENT OF LIQUID HYDROCARBONS BY DISPLACEMENT METERS |
| ASTM D 1796 : 2011 : EDT 1 | Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure) |
| API MPM CH6.4 : 2007 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 6: METERING ASSEMBLIES - SECTION 4: METERING SYSTEMS FOR AVIATION FUELING FACILITIES |
| API MPM CH20.5 : 2017 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 20.5: RECOMMENDED PRACTICE FOR APPLICATION OF PRODUCTION WELL TESTING IN MEASUREMENT AND ALLOCATION |
| API MPM CH6.4 : 2007 : R2012 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 6: METERING ASSEMBLIES - SECTION 4: METERING SYSTEMS FOR AVIATION FUELING FACILITIES |
| API MPMS CHAPTER 17.2 : 1999(R2011) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 17: MARINE MEASUREMENT - SECTION 2: MEASUREMENT OF CARGOES ON BOARD TANK VESSELS |
| ISO 13739:2010 | Petroleum products Procedures for transfer of bunkers to vessels |
| API MPM CH10.4 : 2013 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 10.4: DETERMINATION OF WATER AND/OR SEDIMENT IN CRUDE OIL BY THE CENTRIFUGE METHOD (FIELD PROCEDURE) |
| ASTM D 4377 : 2000 : R2006 | Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration |
| ASTM D 1796 : 2011 | Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure) |
| ASTM D 5854 : 1996 : R2010 | Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products |
| ASTM D 4377 : 2000 : R2011 | Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration (Withdrawn 2020) |
| ASTM D 4807 : 2005 | Standard Test Method for Sediment in Crude Oil by Membrane Filtration |
| ASTM D 5854 : 1996 : R2015 | Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products |
| ASTM D 4377 : 2000 : EDT 1 | Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration |
| API MPM CH3.1B : 2001 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 3 - TANK GAUGING - SECTION 1B - STANDARD PRACTICE FOR LEVEL MEASUREMENT OF LIQUID HYDROCARBONS IN STATIONARY TANKS BY AUTOMATIC TANK GAUGING |
| API MPM CH8.4 : 2017 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 8.4: STANDARD PRACTICE FOR SAMPLING AND HANDLING OF FUELS FOR VOLATILITY MEASUREMENT |
| API RP 77:2018 | RISK-BASED APPROACH FOR MANAGING HYDROCARBON VAPOR EXPOSURE DURING TANK GAUGING, SAMPLING, AND MAINTENANCE OF ONSHORE PRODUCTION FACILITIES |
| API MPM CH5.6 SPANISH : 2002 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 5: METERING - SECTION 6: MEASUREMENT OF LIQUID HYDROCARBONS BY CORIOLIS METERS |
| API MPMS : 2016 | MEASUREMENT OF CRUDE OIL BY CORIOLIS METERS |
| ASTM D 473 : 2007 : R2017 | Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method |
| ASTM D 5854 : 1996 : R2005 | Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products |
| API MPM CH3.1B SPANISH : 2001(R2006) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 3 : TANK GAUGING - SECTION 1B: STANDARD PRACTICE FOR LEVEL MEASUREMENT OF LIQUID HYDROCARBONS IN STATIONARY TANKS BY AUTOMATIC TANK GAUGING |
| API TR 2572 : 2013 | CARBON CONTENT, SAMPLING, AND CALCULATION |
| ASTM D 1298 : 2012 : REV B | Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method |
| API MPMS CH17.12 SPANISH : 2015 | API Manual of Petroleum Measurement Standards Chapter 17.12 - EI Hydrocarbon Management HM 51 |
| API MPM CH8.2 : 2016 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 8.2: STANDARD PRACTICE FOR AUTOMATIC SAMPLING OF PETROLEUM AND PETROLEUM PRODUCTS |
| API MPM CH20.1 : 1993 : R2006 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 20 - ALLOCATION MEASUREMENT - SECTION 1 - ALLOCATION MEASUREMENT |
| API TR 2573 : 2013 | Standard Guide for Sediment and Water Determination in Crude Oil Standard Guide for Sediment and Water Determination in Crude Oil |
| API MPM CH17.1 : 2014 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 17.1: GUIDELINES FOR MARINE INSPECTION |
| API MPM CH16.2:1994 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 16 - MEASUREMENT OF HYDROCARBON FLUIDS BY WEIGHT OR MASS - SECTION 2 - MASS MEASUREMENT OF LIQUID HYDROCARBONS IN VERTICAL CYLINDRICAL STORAGE TANKS BY HYDROSTATIC TANK GAUGING |
| API MPM CH20.1 : 1993 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 20 - ALLOCATION MEASUREMENT - SECTION 1 - ALLOCATION MEASUREMENT |
| ASTM D 1298 : 2012 | Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method |
| ASTM D 4007 : 2011 | Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure) |
| ASTM D 6822 : 2012 : REV A | Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method |
| API MPM CH3.6 : 2001 : INC : ERR 1 : 2005(R2017) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 3 - TANK GAUGING - SECTION 6 - MEASUREMENT OF LIQUID HYDROCARBONS BY HYBRID TANK MEASUREMENT SYSTEMS |
| API MPM CH10.9 SPANISH : 2013 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 10.9: STANDARD TEST METHOD FOR WATER IN CRUDE OILS BY COULOMETRIC KARL FISCHER TITRATION |
| API MPM CH6.6:1991 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 6 - METERING ASSEMBLIES - SECTION 6 - PIPELINE METERING SYSTEMS |
| API MPM CH10.9 : 2013 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 10.9: STANDARD TEST METHOD FOR WATER IN CRUDE OILS BY COULOMETRIC KARL FISCHER TITRATION |
| API MPM CH5.6 : 2002(R2013) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 5 - METERING - SECTION 6 - MEASUREMENT OF LIQUID HYDROCARBONS BY CORIOLIS METERS |
| API MPM CH17.4 SPANISH : 2016 | Marine Measurement: Method for Quantification of Small Volumes on Marine Vessels (OBQ/ROB) |
| API MPMS CH10.6 : 2013(R2016) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 10.6: STANDARD TEST METHOD FOR WATER AND SEDIMENT IN FUEL OILS BY THE CENTRIFUGE METHOD (LABORATORY PROCEDURE) |
| ASTM D 4007 : 2011 : R2016 : EDT 1 | Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure) |
| API MPM CH17.8 SPANISH : 2016 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 17.8: GUIDELINES FOR PRE-LOADING INSPECTION OF MARINE VESSEL CARGO TANKS AND THEIR CARGO-HANDLING SYSTEMS |
| API MPM CH9.3 : 2012(R2017) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 9.3: STANDARD TEST METHOD FOR DENSITY, RELATIVE DENSITY, AND API GRAVITY OF CRUDE PETROLEUM AND LIQUID PETROLEUM PRODUCTS BY THERMOHYDROMETER METHOD |
| API MPM CH20.1 : 1993( R2016) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 20 - ALLOCATION MEASUREMENT - SECTION 1 - ALLOCATION MEASUREMENT |
| API MPM CH10.3 REDLINE : 2008 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 10: SEDIMENT AND WATER - SECTION 3: STANDARD TEST METHOD FOR WATER AND SEDIMENT IN CRUDE OIL BY THE CENTRIFUGE METHOD (LABORATORY PROCEDURE) |
| API MPM CH5.2 : 2005(R2015) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 5 - METERING - SECTION 2 - MEASUREMENT OF LIQUID HYDROCARBONS BY DISPLACEMENT METERS |
| API RP 1640 : 2013 | PRODUCT QUALITY IN LIGHT PRODUCT STORAGE AND HANDLING OPERATIONS |
| API MPM CH17.2 SPANISH : 1999 | MANUAL DE ESTANDARES DE MEDICION DE PETROLEO - CAPITULO 17: MEDICIONES MARITIMAS - SECCION 2: MEDICIONES DE CARGAS A BORDO DE BUQUE TANQUES |
| API MPMS CH17.4 : 2016 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 17.4: METHOD FOR QUANTIFICATION OF SMALL VOLUMES ON MARINE VESSELS (OBQ/ROB) |
| API MPM CH16.2 : 1994(R2017) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 16 - MEASUREMENT OF HYDROCARBON FLUIDS BY WEIGHT OR MASS - SECTION 2 - MASS MEASUREMENT OF LIQUID HYDROCARBONS IN VERTICAL CYLINDRICAL STORAGE TANKS BY HYDROSTATIC TANK GAUGING |
| API MPMS CH17.11 SPANISH : 2016 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 17.11: MEASUREMENT AND SAMPLING OF CARGOES ON BOARD TANK VESSELS USING CLOSED AND RESTRICTED EQUIPMENT |
| ASTM D 3089 : 1997 : R2008 | Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
| ASTM D 473 : 2007 : R2017 : EDT 1 | Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method |
| ASTM D 7829 : 2013 : R2018 | Standard Guide for Sediment and Water Determination in Crude Oil |
| ASTM D 7829 : 2013 | Standard Guide for Sediment and Water Determination in Crude Oil |
| ASTM D 8009 : 2015 | Standard Practice for Manual Piston Cylinder Sampling for Volatile Crude Oils, Condensates, and Liquid Petroleum Products |
| IP 359 : 1982 | DETERMINATION OF WATER AND SEDIMENT CONTENT OF CRUDE OILS - CENTRIFUGE METHOD |
| ASTM D 4007 : 2011 : R2016 | Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure) |
| ASTM D 6822 : 2012 : REV B | Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method |
| ASTM UOP 163 : 2010 | Hydrogen Sulfide and Mercaptan Sulfur in Liquid Hydrocarbons by Potentiometric Titration |
| ASTM D 4840 : 1999 | Standard Guide for Sampling Chain-of-Custody Procedures |
| ASTM D 3700 : 2016 : REDLINE | Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder |
| ASTM D 2172 : 2005 | Standard Test Methods for Quantitative Extraction of Bitumen From Bituminous Paving Mixtures |
| ASTM D 4306 : 2015 : REDLINE | Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination |
| ASTM D 7169 : 2016-11 | TEST METHOD FOR BOILING POINT DISTRIBUTION OF SAMPLES WITH RESIDUES SUCH AS CRUDE OILS AND ATMOSPHERIC AND VACUUM RESIDUES BY HIGH TEMPERATURE GAS CHROMATOGRAPHY |
| ASTM D 6377 : 2016 : REDLINE | Standard Test Method for Determination of Vapor Pressure of Crude Oil: VPCR<inf>x</inf > (Expansion Method) |
| ASTM D 86 : 2017-06 | TEST METHOD FOR DISTILLATION OF PETROLEUM PRODUCTS AND LIQUID FUELS AT ATMOSPHERIC PRESSURE |
| API MPM CH10.4 : 2013 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 10.4: DETERMINATION OF WATER AND/OR SEDIMENT IN CRUDE OIL BY THE CENTRIFUGE METHOD (FIELD PROCEDURE) |
| ASTM D 4530 : 2015 : REDLINE | Standard Test Method for Determination of Carbon Residue (Micro Method) |
| API MPM CH17.1 : 2014 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 17.1: GUIDELINES FOR MARINE INSPECTION |
| ASTM D 217 : 2017 : REDLINE | TEST METHODS FOR CONE PENETRATION OF LUBRICATING GREASE |
| API MPM CH10.2 : 2016 | Determination of Water in Crude Oil by Distillation |
| API MPM CH10.9 : 2013 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 10.9: STANDARD TEST METHOD FOR WATER IN CRUDE OILS BY COULOMETRIC KARL FISCHER TITRATION |
| GPA 2174 : 2014 | OBTAINING LIQUID HYDROCARBONS SAMPLES FOR ANALYSIS BY GAS CHROMATOGRAPHY |
| API MPM CH8.4 : 2014 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 8.4: STANDARD PRACTICE FOR SAMPLING AND HANDLING OF FUELS FOR VOLATILITY MEASUREMENT |
| API MPM CH17.2 : 1999 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 17: MARINE MEASUREMENT - SECTION 2: MEASUREMENT OF CARGOES ON BOARD TANK VESSELS |
| ASTM D 6849 : 2013 : REDLINE | Standard Practice for Storage and Use of Liquefied Petroleum Gases (LPG) in Sample Cylinders for LPG Test Methods |
| ASTM D 5002 : 2016-02 | TEST METHOD FOR DENSITY AND RELATIVE DENSITY OF CRUDE OILS BY DIGITAL DENSITY ANALYZER |
| ASTM D 3230 : 2013 | Standard Test Method for Salts in Crude Oil (Electrometric Method) |
| ASTM D 2622 : 2016 : REDLINE | Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry |
| ASTM D 1838 : 2016 : REDLINE | Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases |
| CFR 49(PTS100-185) : 0 | TRANSPORTATION |
| ASTM D 5191 : 2015-10 | TEST METHOD FOR VAPOR PRESSURE OF PETROLEUM PRODUCTS (MINI METHOD) |
| API MPM CH8.2 : 2016 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 8.2: STANDARD PRACTICE FOR AUTOMATIC SAMPLING OF PETROLEUM AND PETROLEUM PRODUCTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.