API 934-A : 2008
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
MATERIALS AND FABRICATION OF 2 [1/4]CR-1MO, 2 [1/4]CR-1MO-[1/4]V, 3CR-1MO, AND 3CR-1MO-[1/4]V STEEL HEAVY WALL PRESSURE VESSELS FOR HIGH-TEMPERATURE, HIGH-PRESSURE HYDROGEN SERVICE
Hardcopy , PDF
07-02-2019
01-01-2008
1 Scope
2 References
3 Terms, Definitions, and Acronyms
4 Design
5 Base Metal Requirements
6 Welding Consumable Requirements
7 Welding, Heat Treatment and Production Testing
8 Nondestructive Examinations (NDE)
9 Hydrostatic Testing
10 Preparations for Shipping
11 Documentation
Annex A (informative) - Guidance for Inspection for
Transverse Reheat Cracking
Annex B (informative) - Weld Metal/Flux Screening Test
for Reheat Cracking Susceptibility
Bibliography
Describes materials and fabrication requirements for new 2 [1/4]Cr and 3Cr steel heavy wall pressure vessels for high-temperature, high-pressure hydrogen service.
| DevelopmentNote |
Also available in Russian translation, see API 934-A RUSSIAN. (07/2013)
|
| DocumentType |
Standard
|
| Pages |
57
|
| ProductNote |
New child ADD 2 is added.
|
| PublisherName |
American Petroleum Institute
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| BS ISO 16110-1:2007 | Hydrogen generators using fuel processing technologies Safety |
| API 582 REDLINE : 2009 | WELDING GUIDELINES FOR THE CHEMICAL, OIL, AND GAS INDUSTRIES |
| API TR 934-D : 2010 | TECHNICAL REPORT ON THE MATERIALS AND FABRICATION ISSUES OF 1[1/4]CR-[1/2]MO AND 1CR-[1/2]MO STEEL PRESSURE VESSELS |
| API 660 : 2015 | SHELL-AND-TUBE HEAT EXCHANGERS |
| ASME PTB 2 : 2009 | GUIDE TO LIFE CYCLE MANAGEMENT OF PRESSURE EQUIPMENT INTEGRITY |
| 17/30341479 DC : 0 | BS ISO 16111 - TRANSPORTABLE GAS STORAGE DEVICES - HYDROGEN ABSORBED IN REVERSIBLE METAL HYDRIDE |
| API TR 934-B : 2011 | FABRICATION CONSIDERATIONS FOR VANADIUM-MODIFIED CR-MO STEEL HEAVY WALL PRESSURE VESSELS |
| BS ISO 16111:2008 | Transportable gas storage devices. Hydrogen absorbed in reversible metal hydride |
| API 571 REDLINE : 2011 | DAMAGE MECHANISMS AFFECTING FIXED EQUIPMENT IN THE REFINING INDUSTRY |
| API 571 FRENCH : 2003 | MECANISMES D'ENDOMMAGEMENT AFFECTANT LES EQUIPEMENTS STATIQUES DANS L'INDUSTRIE DU RAFFINAGE |
| API 571 GERMAN : 2009 | SCHADENSMECHANISMEN UND DEREN EINFLUSS AUF STATISCHE AUSRUESTUNGSTEILE IN DER RAFFINERIEINDUSTRIE |
| ANSI/CSA FC 1:2014 | FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY |
| ISO 16111:2008 | Transportable gas storage devices Hydrogen absorbed in reversible metal hydride |
| ISO 16110-1:2007 | Hydrogen generators using fuel processing technologies Part 1: Safety |
| API 582 : 2016 | WELDING GUIDELINES FOR THE CHEMICAL, OIL, AND GAS INDUSTRIES |
| API 571 : 2011 | DAMAGE MECHANISMS AFFECTING FIXED EQUIPMENT IN THE REFINING INDUSTRY |
| SAE J2579_201303 | Standard for Fuel Systems in Fuel Cell and Other Hydrogen Vehicles |
| UNE-ISO 16110-1:2015 | Hydrogen generators using fuel processing technologies -- Part 1: Safety |
| API 934-C : 2008 | MATERIALS AND FABRICATION OF 1 [1/4]CR-[1/2]MO STEEL HEAVY WALL PRESSURE VESSELS FOR HIGH-PRESSURE HYDROGEN SERVICE OPERATING AT OR BELOW 825 DEGREES F (441 DEGREES C) |
| ASME PCC 2S : 2015 | SUPPLEMENT TO ASME PCC-2 - 2015 - REPAIR OF PRESSURE EQUIPMENT AND PIPING |
| ASME PTB 8 : 2014 | Procurement Guidelines for Metallic Materials (PTB-8 - 2014) |
| ASME STP-PT-026 : 2009 | GUARANTEED HIGHER STRENGTH PROPERTIES |
| ASME PV CODE 8 DIV 2 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 2- ALTERNATIVE RULES |
| ASNT SNT TC 1A : 2016 | TOPICAL OUTLINES FOR QUALIFICATION OF NONDESTRUCTIVE TESTING PERSONNEL |
| ASME PV CODE 9 : 2017 | BOILER AND PRESSURE VESSEL CODE - WELDING, BRAZING, AND FUSING QUALIFICATIONS - QUALIFICATION STANDARD FOR WELDING, BRAZING, AND FUSING PROCEDURES; WELDERS; BRAZERS; AND WELDING, BRAZING, AND FUSING OPERATORS |
| ASTM G 146 : 2001 | Standard Practice for Evaluation of Disbonding of Bimetallic Stainless Alloy/Steel Plate for Use in High-Pressure, High-Temperature Refinery Hydrogen Service |
| ASME PV CODE 8 DIV 1 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1 |
| ASTM E 83 : 2016 : REDLINE | Standard Practice for Verification and Classification of Extensometer Systems |
| ISO 9513:2012 | Metallic materials — Calibration of extensometer systems used in uniaxial testing |
| AWS A4.3 : 1993 | DETERMINATION OF THE DIFFUSIBLE HYDROGEN CONTENT OF MARTENSITIC, BAINITIC, AND FERRITIC STEEL WELD METAL PRODUCED BY ARC WELDING |
| ASME PV CODE 2D METRIC : 2017 | BOILER AND PRESSURE VESSEL CODE - MATERIALS - PROPERTIES (METRIC) |
| ASTM E 633 : 2013 : REDLINE | Standard Guide for Use of Thermocouples in Creep and Stress-Rupture Testing to 1800°F (1000°C) in Air |
| ISO 376:2011 | Metallic materials — Calibration of force-proving instruments used for the verification of uniaxial testing machines |
| API 582 : 2016 | WELDING GUIDELINES FOR THE CHEMICAL, OIL, AND GAS INDUSTRIES |
| ASME PV CODE 5 : 2017 | BOILER AND PRESSURE VESSEL CODE - NONDESTRUCTIVE EXAMINATION |
| ASME PV CODE 2A : 2017 | BOILER AND PRESSURE VESSEL CODE - MATERIALS - FERROUS MATERIAL SPECIFICATIONS (BEGINNING TO SA-450) AND (SA-451 TO END) |
| ASME PV CODE 2D CUSTOMARY : 2017 | BOILER AND PRESSURE VESSEL CODE - MATERIALS - PROPERTIES (CUSTOMARY) |
| ASME PV CODE 2C : 2017 | BOILER AND PRESSURE VESSEL CODE - MATERIALS - SPECIFICATIONS FOR WELDING RODS, ELECTRODES, AND FILLER METALS |
| AWS A4.2M/A4.2 : 1997 | STANDARD PROCEDURE FOR CALIBRATING MAGNETIC INSTRUMENTS TO MEASURE THE DELTA FERRITE CONTENT OF AUSTENITIC AND DUPLEX FERRITIC-AUSTENITIC STAINLESS WELD METAL |
Important note : All end users must be registered with an Account prior to user licenses being assigned.Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Logging out.