API 579-1 : 2016
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
FITNESS-FOR-SERVICE
Available format(s)
Hardcopy , PDF
Superseded date
09-02-2022
Superseded by
Language(s)
English
Published date
01-06-2016
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
PART 1 - INTRODUCTION
PART 2 - FITNESS-FOR-SERVICE ENGINEERING ASSESSMENT
PROCEDURE
PART 3 - ASSESSMENT OF EXISTING EQUIPMENT FOR BRITTLE
FRACTURE
PART 4 - ASSESSMENT OF GENERAL METAL LOSS
PART 5 - ASSESSMENT OF LOCAL METAL LOSS
PART 6 - ASSESSMENT OF PITTING CORROSION
PART 7 - ASSESSMENT OF HYDROGEN BLISTERS AND HYDROGEN
DAMAGE ASSOCIATED WITH HIC AND SOHIC
PART 8 - ASSESSMENT OF WELD MISALIGNMENT AND SHELL
DISTORTIONS
PART 9 - ASSESSMENT OF CRACK-LIKE FLAWS
PART 10 - ASSESSMENT OF COMPONENTS OPERATING IN THE
CREEP RANGE
PART 11 - ASSESSMENT OF FIRE DAMAGE
PART 12 - ASSESSMENT OF DENTS, GOUGES, AND DENT-GOUGE
COMBINATIONS
PART 13 - ASSESSMENT OF LAMINATIONS
PART 14 - ASSESSMENT OF FATIGUE DAMAGE
Gives rules for the design, fabrication, inspection and testing of new pressure vessels, piping systems, and storage tanks.
| DevelopmentNote |
Also numbered as ASME FFS 1. (04/2008) Also available in CD-ROM format. Also available in Hard-Copy and CD-ROM combination format. (08/2016)
|
| DocumentType |
Standard
|
| ISBN |
9780791870570
|
| Pages |
1320
|
| ProductNote |
This product is unavailable in Cuba, Iran, North Korea, Syria
|
| PublisherName |
American Petroleum Institute
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| PD CEN/TR 15235:2005 | Welding. Methods for assessing imperfections in metallic structures |
| 15/30316712 DC : 0 | BS ISO 27306 - METALLIC MATERIALS - METHOD OF CONSTRAINT LOSS CORRECTION OF CTOD FRACTURE TOUGHNESS FOR FRACTURE ASSESSMENT OF STEEL COMPONENTS |
| EI SAND EROSION & EROSION-CORROSION : 2017 | GUIDELINES ON SAND EROSION AND EROSION-CORROSION MANAGEMENT |
| CSA N285.7 : 2015 | Periodic inspection of CANDU nuclear power plant balance of plant systems and components<br> |
| PD 8010-4:2012 | Pipeline systems Steel pipelines on land and subsea pipelines. Code of practice for integrity management |
| API 570 REDLINE : 2009 | PIPING INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION OF PIPING SYSTEMS |
| MIL-PRF-32080 Revision G:2014 | TRUCK, AIRCRAFT FUELING-DEFUELING, 6,000 GALLON, A/S32R-11 |
| BS PD ISO/TR 10400 : 2007 | PETROLEUM AND NATURAL GAS INDUSTRIES - EQUATIONS AND CALCULATIONS FOR THE PROPERTIES OF CASING, TUBING, DRILL PIPE AND LINE PIPE USED AS CASING OR TUBING |
| API 579-2 : 2009 | FITNESS-FOR-SERVICE EXAMPLE PROBLEM MANUAL |
| API 574 : 2016 | INSPECTION PRACTICES FOR PIPING SYSTEM COMPONENTS |
| 17/30293106 DC : 0 | BS EN ISO 19345-2 - PETROLEUM AND NATURAL GAS INDUSTRY - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE INTEGRITY MANAGEMENT SPECIFICATION - PART 2: FULL-LIFE CYCLE INTEGRITY MANAGEMENT FOR OFFSHORE PIPELINE |
| I.S. CEN/TR 15235:2005 | WELDING - METHODS FOR ASSESSING IMPERFECTIONS IN METALLIC STRUCTURES |
| API 17G : 2006 : R2011 | RECOMMENDED PRACTICE FOR COMPLETION/WORKOVER RISERS |
| API 572 : 2016 | INSPECTION PRACTICES FOR PRESSURE VESSELS |
| ISO/TTA 5:2007 | Code of practice for creep/fatigue testing of cracked components |
| API 653 : 2014 | TANK INSPECTION, REPAIR, ALTERATION, AND RECONSTRUCTION |
| NACE SP 01 10 : 2010 | WET GAS INTERNAL CORROSION DIRECT ASSESSMENT METHODOLOGY FOR PIPELINES |
| API 530 : 2015 | CALCULATION OF HEATER-TUBE THICKNESS IN PETROLEUM REFINERIES |
| NACE RP 02 05 : 2005 | RECOMMENDED PRACTICE FOR THE DESIGN, FABRICATION, AND INSPECTION OF TANKS FOR THE STORAGE OF PETROLEUM REFINING ALKYLATION UNIT SPENT SULFURIC ACID AT AMBIENT TEMPERATURES |
| ASME PTB 2 : 2009 | GUIDE TO LIFE CYCLE MANAGEMENT OF PRESSURE EQUIPMENT INTEGRITY |
| API TR 942-A : 2014 | MATERIALS, FABRICATION, AND REPAIR CONSIDERATIONS FOR HYDROGEN REFORMER FURNACE OUTLET PIGTAILS AND MANIFOLDS |
| API 530 REDLINE : 2008 | CALCULATION OF HEATER-TUBE THICKNESS IN PETROLEUM REFINERIES |
| 14/30286897 DC : 0 | PD 8010-1 - PIPELINE SYSTEMS - PART 1: STEEL PIPELINES ON LAND - CODE OF PRACTICE |
| EEMUA 223 : 2010 | PRESSURE EQUIPMENT TESTING AFTER REPAIR, MODIFICATIONS OR RE-RATING: A GUIDE TO THE PRESSURE TEST WAIVER |
| 12/30241229 DC : 0 | BS 7910 - GUIDE TO METHODS FOR ASSESSING THE ACCEPTABILITY OF FLAWS IN METALLIC STRUCTURES |
| PD ISO/TR 22694:2008 | Gas cylinders. Methods for establishing acceptance/ rejection criteria for flaws in seamless steel and aluminium alloy cylinders at time of periodic inspection and testing |
| API 581 REDLINE : 2008 | RISK-BASED INSPECTION TECHNOLOGY |
| CSA S473 : 2004 | STEEL STRUCTURES |
| API 571 REDLINE : 2011 | DAMAGE MECHANISMS AFFECTING FIXED EQUIPMENT IN THE REFINING INDUSTRY |
| ISO/TS 35105:2018 | Petroleum and natural gas industries Arctic operations Material requirements for arctic operations |
| EN 16991:2018 | Risk-based inspection framework |
| BS EN ISO 13704:2007 | Petroleum, petrochemical and natural gas industries. Calculation of heater-tube thickness in petroleum refineries |
| ISO/TS 24817:2006 | Petroleum, petrochemical and natural gas industries Composite repairs for pipework Qualification and design, installation, testing and inspection |
| BS 7910(2013) : 2013 | GUIDE TO METHODS FOR ASSESSING THE ACCEPTABILITY OF FLAWS IN METALLIC STRUCTURES |
| BS 7910:2005 | Guide to methods for assessing the acceptability of flaws in metallic structures |
| ASME PV CODE 8 DIV 3 : 2017 | BPVC Section VIII-BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS - ALTERNATIVE RULES FOR CONSTRUCTION OF HIGH PRESSURE VESSELS |
| ASME PCC 2 : 2015 | REPAIR OF PRESSURE EQUIPMENT AND PIPING |
| API 571 FRENCH : 2003 | MECANISMES D'ENDOMMAGEMENT AFFECTANT LES EQUIPEMENTS STATIQUES DANS L'INDUSTRIE DU RAFFINAGE |
| BS ISO 27306:2016 | Metallic materials. Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components |
| NACE SP 02 08 : 2008 | INTERNAL CORROSION DIRECT ASSESSMENT METHODOLOGY FOR LIQUID PETROLEUM PIPELINES |
| API 945:2003 | AVOIDING ENVIRONMENTAL CRACKING IN AMINE UNITS |
| 14/30286899 DC : 0 | PD 8010-2 - PIPELINE SYSTEMS - PART 2: SUBSEA PIPELINES - CODE OF PRACTICE |
| 08/30151040 DC : DRAFT MAR 2008 | BS ISO 27306 - METALLIC MATERIALS - METHOD OF CONSTRAINT LOSS CORRECTION OF CTOD FRACTURE TOUGHNESS FOR FRACTURE ASSESSMENT OF STEEL COMPONENTS |
| API 571 GERMAN : 2009 | SCHADENSMECHANISMEN UND DEREN EINFLUSS AUF STATISCHE AUSRUESTUNGSTEILE IN DER RAFFINERIEINDUSTRIE |
| UNI/TS 11325-1 : 2009 | PRESSURE EQUIPMENT - PUTTING INTO SERVICE AND USE OF PRESSURE EQUIPMENT AND ASSEMBLIES - PART 1: ASSESSMENT OF INTEGRITY AND EFFICIENCY OF IN-SERVICE PIPELINES FOR THE PURPOSES OF PERIODIC REQUALIFICATION |
| API TR 942-B : 2017 | MATERIAL, FABRICATION, AND REPAIR CONSIDERATIONS FOR AUSTENITIC ALLOYS SUBJECT TO EMBRITTELEMENT AND CRACKING IN HIGH TEMPERATURE 565 DEGREES C TO 760 DEGREES C (1050 DEGREES F TO 1400 DEGREES F) REFINERY SERVICES |
| API 584 : 2014 | INTEGRITY OPERATING WINDOWS |
| PD 8010-1:2004 | Code of practice for pipelines Steel pipelines on land |
| ISO 24817:2017 | Petroleum, petrochemical and natural gas industries — Composite repairs for pipework — Qualification and design, installation, testing and inspection |
| API RP 2611 : 2011 | TERMINAL PIPING INSPECTION - INSPECTION OF IN-SERVICE TERMINAL PIPING SYSTEMS |
| FD ISO/TR 22694 : 2009 FD | GAS CYLINDERS - METHODS FOR ESTABLISHING ACCEPTANCE/REJECTION CRITERIA FOR FLAWS IN SEAMLESS STEEL AND ALUMINIUM ALLOY CYLINDERS AT TIME OF PERIODIC INSPECTION AND TESTING |
| API 578 : 2018 | GUIDELINES FOR A MATERIAL VERIFICATION PROGRAM (MVP) FOR NEW AND EXISTING ASSETS |
| API 939-E : 2013 | IDENTIFICATION, REPAIR, AND MITIGATION OF CRACKING OF STEEL EQUIPMENT IN FUEL ETHANOL SERVICE |
| API 939-C : 2009 | GUIDELINES FOR AVOIDING SULFIDATION (SULFIDIC) CORROSION FAILURES IN OIL REFINERIES |
| BS EN ISO 24817:2017 | Petroleum, petrochemical and natural gas industries. Composite repairs for pipework. Qualification and design, installation, testing and inspection |
| I.S. EN 16991:2018 | RISK-BASED INSPECTION FRAMEWORK |
| NACE SP 02 05 : 2010 | DESIGN, FABRICATION, AND INSPECTION OF TANKS FOR THE STORAGE OF PETROLEUM REFINING ALKYLATION UNIT SPENT SULFURIC ACID AT AMBIENT TEMPERATURES |
| API 1626 REDLINE : 2010 | STORING AND HANDLING ETHANOL AND GASOLINE-ETHANOL BLENDS AT DISTRIBUTION TERMINALS AND FILLING STATIONS |
| NFPA 55 : 2016 | COMPRESSED GASES AND CRYOGENIC FLUIDS CODE |
| ISO 13704:2007 | Petroleum, petrochemical and natural gas industries — Calculation of heater-tube thickness in petroleum refineries |
| NASA STD 5019 : 2016 | FRACTURE CONTROL REQUIREMENTS FOR SPACEFLIGHT HARDWARE |
| NASA STD 5019(INT) : 2006 | FRACTURE CONTROL REQUIREMENTS FOR SPACEFLIGHT HARDWARE |
| EEMUA 193 : 2013 | MANAGING COMPETENCE ASSURANCE FOR PERSONNEL UNDERTAKING IN-SERVICE INSPECTION OF PRESSURE EQUIPMENT |
| EEMUA 211 : 2016 | GUIDANCE ON THE SPECIFICATION OF PRESSURE VESSELS |
| I.S. EN ISO 13704:2007 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - CALCULATION OF HEATER-TUBE THICKNESS IN PETROLEUM REFINERIES |
| BS ISO 13628-7 : 2005 AMD 16887 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 7: COMPLETION/WORKOVER RISER SYSTEMS |
| 04/19991491 DC : DRAFT DEC 2004 | BS ISO 10400 - PETROLEUM AND NATURAL GAS INDUSTRIES - FORMULAE AND CALCULATION FOR CASING, TUBING, DRILL PIPE AND LINE PIPE PROPERTIES |
| NACE SP 01 13 : 2013 | PIPELINE INTEGRITY METHOD SELECTION |
| API 570 : 2016 | PIPING INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION OF PIPING SYSTEMS |
| 14/30256269 DC : 0 | BS EN ISO 24817 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COMPOSITE REPAIRS FOR PIPEWORK - QUALIFICATION AND DESIGN, INSTALLATION, TESTING AND INSPECTION |
| UNI CEN/TR 15235 : 2012 | WELDING - METHODS FOR ASSESSING IMPERFECTIONS IN METALLIC STRUCTURES |
| PD 8010-2:2004 | Code of practice for pipelines Subsea pipelines |
| DD ISO/TS 24817 : 2006 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COMPOSITE REPAIRS FOR PIPEWORK - QUALIFICATION AND DESIGN, INSTALLATION, TESTING AND INSPECTION |
| API 939-B : 2002 | REPAIR AND REMEDIATION STRATEGIES FOR EQUIPMENT OPERATING IN WET H[2]S SERVICE |
| API 573 : 2013 | INSPECTION OF FIRED BOILERS AND HEATERS |
| API 970 : 2017 | CORROSION CONTROL DOCUMENTS |
| API 653 CHINESE : 2014 | TANK INSPECTION, REPAIR, ALTERATION, AND RECONSTRUCTION |
| API 580 REDLINE : 2009 | RISK-BASED INSPECTION |
| API 585 : 2014 | PRESSURE EQUIPMENT INTEGRITY INCIDENT INVESTIGATION |
| API 2A WSD : 2014 | PLANNING, DESIGNING, AND CONSTRUCTING FIXED OFFSHORE PLATFORMS - WORKING STRESS DESIGN |
| API 571 : 2011 | DAMAGE MECHANISMS AFFECTING FIXED EQUIPMENT IN THE REFINING INDUSTRY |
| API 510 CHINESE : 2014 | PRESSURE VESSEL INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION |
| API 570 CHINESE : 2009 | PIPING INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION OF PIPING SYSTEMS |
| API RP 1176 : 2016 | RECOMMENDED PRACTICE FOR ASSESSMENT AND MANAGEMENT OF CRACKING IN PIPELINES |
| S.R. CEN ISO TR 10400:2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - EQUATIONS AND CALCULATIONS FOR THE PROPERTIES OF CASING, TUBING, DRILL PIPE AND LINE PIPE USED AS CASING OR TUBING |
| ISO/TR 22694:2008 | Gas cylinders Methods for establishing acceptance/rejection criteria for flaws in seamless steel and aluminium alloy cylinders at time of periodic inspection and testing |
| API 1626 : 2010 | STORING AND HANDLING ETHANOL AND GASOLINE-ETHANOL BLENDS AT DISTRIBUTION TERMINALS AND FILLING STATIONS |
| ISO/TR 10400:2007 | Petroleum and natural gas industries Equations and calculations for the properties of casing, tubing, drill pipe and line pipe used as casing or tubing |
| BS EN ISO 13628-7:2006 | Petroleum and natural gas industries. Design and operation of subsea production systems Completion/workover riser systems |
| ISO 13628-7:2005 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 7: Completion/workover riser systems |
| EN ISO 13628-7:2006 | Petroleum and natural gas industries - Design and operation of subsea production systems - Part 7: Completion/workover riser systems (ISO 13628-7:2005) |
| 16/30337806 DC : 0 | BS EN 16991 - RISK BASED INSPECTION FRAMEWORK (RBIF) |
| NASA JSC 25863 : 2009 | FRACTURE CONTROL PLAN FOR JSC SPACE-FLIGHT HARDWARE |
| API 574 REDLINE : 2009 | INSPECTION PRACTICES FOR PIPING SYSTEM COMPONENTS |
| API 945 : 2003 : R2008 | AVOIDING ENVIRONMENTAL CRACKING IN AMINE UNITS |
| API 653 REDLINE : 2009 | TANK INSPECTION, REPAIR, ALTERATION, AND RECONSTRUCTION |
| API 580 : 2016 | RISK-BASED INSPECTION |
| API 572 REDLINE : 2009 | INSPECTION PRACTICES FOR PRESSURE VESSELS |
| NACE SP 02 94 : 2006 | DESIGN, FABRICATION, AND INSPECTION OF STORAGE TANK SYSTEMS FOR CONCENTRATED FRESH AND PROCESS SULFURIC ACID AND OLEUM AT AMBIENT TEMPERATURES |
| API 510 : 2014 | PRESSURE VESSEL INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION |
| API TR 1PER15K-1 : 2013 | PROTOCOL FOR VERIFICATION AND VALIDATION OF HIGH-PRESSURE HIGH-TEMPERATURE EQUIPMENT |
| API 1160 : 2013 | MANAGING SYSTEM INTEGRITY FOR HAZARDOUS LIQUID PIPELINES |
| API 572 CHINESE : 2009 | INSPECTION PRACTICES FOR PRESSURE VESSELS |
| API 17G : 2006 : R2016 | RECOMMENDED PRACTICE FOR COMPLETION/WORKOVER RISERS |
| API 574 CHINESE : 2009 | INSPECTION PRACTICES FOR PIPING SYSTEM COMPONENTS |
| API TR 934-G : 2016 | DESIGN, FABRICATION, OPERATIONAL EFFECTS, INSPECTION, ASSESSMENT, AND REPAIR OF COKE DRUMS AND PERIPHERAL COMPONENTS IN DELAYED COKING UNITS |
| API 17G:2006 | RECOMMENDED PRACTICE FOR COMPLETION/WORKOVER RISERS |
| API TR 17TR8 : 2018 | HIGH-PRESSURE HIGH-TEMPERATURE DESIGN GUIDELINES |
| UNI/TS 11325-8 : 2013 | PRESSURE EQUIPMENT - PUTTING INTO SERVICE AND USE OF PRESSURE EQUIPMENT AND ASSEMBLIES - PART 8: PLANNING OF PRESSURE EQUIPMENT MAINTENANCE BY MEANS OF TECHNIQUES BASED ON RISK ASSESSMENT (RBI) |
| API 581 : 2016 | RISK-BASED INSPECTION METHODOLOGY |
| S.R. CEN ISO TS 24817:2011 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COMPOSITE REPAIRS FOR PIPEWORK - QUALIFICATION AND DESIGN, INSTALLATION, TESTING AND INSPECTION |
| CEN/TR 15235:2005 | Welding - Methods for assessing imperfections in metallic structures |
| ASME STP-PT-025 : 0 | EXTENDED FATIGUE EXEMPTION RULES FOR LOW CR ALLOYS INTO THE TIME-DEPENDENT RANGE FOR SECTION 8 DIVISION 2 CONSTRUCTION |
| ASME PVHO 2 : 2016 | SAFETY STANDARD FOR PRESSURE VESSELS FOR HUMAN OCCUPANCY: IN-SERVICE GUIDELINES |
| ASME STP-PT-082 : 2017 | STRESS INTENSITY K FACTORS FOR EXTERNAL SURFACE CRACKS IN THICK-WALLED CYLINDER VESSELS |
| ASME STP-PT-071 : 2014 | STRESS INTENSITY FACTOR SOLUTIONS FOR INTERNAL CRACKS IN THICK-WALLED CYLINDER VESSELS |
| ASME PCC 2S : 2015 | SUPPLEMENT TO ASME PCC-2 - 2015 - REPAIR OF PRESSURE EQUIPMENT AND PIPING |
| ASME STP-PT-024 : 2008 | DEVELOPMENT OF BASIC TIME-DEPENDENT ALLOWABLE STRESSES FOR CREEP REGIME IN SECTION 8, DIVISION 1 |
| ASME FFS 2 : 2009 | FITNESS-FOR-SERVICE EXAMPLE PROBLEM MANUAL |
| ASME PTB 3 : 2013 | ASME SECTION 8 - DIVISION 2 EXAMPLE PROBLEM MANUAL |
| ASME B31.12 : 2014 | HYDROGEN PIPING AND PIPELINES |
| ASME STP-NU-040 : 2012 | UPDATE AND IMPROVE SUBSECTION NH - SIMPLIFIED ELASTIC AND INELASTIC DESIGN ANALYSIS METHODS |
| ASME STP-PT-070 : 2014 | Design Guidelines for the Effects of Creep, Fatigue & Creep-Fatigue Interaction with Design-By-Analysis and Nondestructive Inspection Acceptance Criteria (STP-PT-070 - 2014) |
| NACE 8X194 : 2006 | MATERIALS AND FABRICATION PRACTICES FOR NEW PRESSURE VESSELS USED IN WET H[2]S REFINERY SERVICE |
| ASME PV CODE 8 DIV 2 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 2- ALTERNATIVE RULES |
| ASTM A 691 : 1998 | Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures |
| API 575 : 2014 | INSPECTION PRACTICES FOR ATMOSPHERIC AND LOW-PRESSURE STORAGE TANKS |
| ASME B31.1 : 2016 | POWER PIPING |
| ASME PV CODE 8 DIV 1 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1 |
| API 576 : 2017 | INSPECTION OF PRESSURE-RELIEVING DEVICES |
| ASME B31.8 : 2016 | Gas Transmission and Distribution Piping Systems |
| ASME PCC 2 : 2015 | REPAIR OF PRESSURE EQUIPMENT AND PIPING |
| API 653 : 2014 | TANK INSPECTION, REPAIR, ALTERATION, AND RECONSTRUCTION |
| API 620 : 2013 | DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS |
| API 573 : 2013 | INSPECTION OF FIRED BOILERS AND HEATERS |
| ASME B31.3:2016 | PROCESS PIPING |
| ASME B31.4 : 2016 | PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES |
| API 581 : 2016 | RISK-BASED INSPECTION METHODOLOGY |
| API 510 : 2014 | PRESSURE VESSEL INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION |
| ASME B31.12 : 2014 | HYDROGEN PIPING AND PIPELINES |
| API 578 : 2010 | GUIDELINES FOR A MATERIAL VERIFICATION PROGRAM (MVP) FOR NEW AND EXISTING ASSETS |
| ISO/TR 7468:1981 | Summary of average stress rupture properties of wrought steels for boilers and pressure vessels |
| API 580 : 2016 | RISK-BASED INSPECTION |
| ASME PTB 3 : 2013 | ASME SECTION 8 - DIVISION 2 EXAMPLE PROBLEM MANUAL |
| API 571 : 2011 | DAMAGE MECHANISMS AFFECTING FIXED EQUIPMENT IN THE REFINING INDUSTRY |
| ASME PV CODE 2D METRIC : 2017 | BOILER AND PRESSURE VESSEL CODE - MATERIALS - PROPERTIES (METRIC) |
| ASCE 7 10 : 2010 | MINIMUM DESIGN LOADS FOR BUILDINGS AND OTHER STRUCTURES |
| API 941 : 2016 | STEELS FOR HYDROGEN SERVICE AT ELEVATED TEMPERATURES AND PRESSURES IN PETROLEUM REFINERIES AND PETROCHEMICAL PLANTS |
| API 530 : 2015 | CALCULATION OF HEATER-TUBE THICKNESS IN PETROLEUM REFINERIES |
| ASME PTB 1 : 2014 | ASME SECTION 8 - DIVISION 2 CRITERIA AND COMMENTARY |
| NACE RP 02 96 : 2004 | GUIDELINES FOR DETECTION, REPAIR, AND MITIGATION OF CRACKING OF EXISTING PETROLEUM REFINERY PRESSURE VESSELS IN WET H[2]S ENVIRONMENTS |
| ASTM G 46 : 1994 : R2018 | Standard Guide for Examination and Evaluation of Pitting Corrosion |
| ASME PV CODE 1 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF POWER BOILERS |
| ASME CODE CASE B & PV : 2017 | CODE CASES: BOILERS AND PRESSURE VESSELS |
| DIN 2413-2:1993-10 | STEEL PIPES - DESIGN OF ELBOWS AND BENDS FOR STEEL PRESSURE PIPES |
| PD 6539:1994 | Guide to methods for the assessment of the influence of crack growth on the significance of defects in components operating at high temperatures |
| ASME PV CODE 2B : 2017 | BOILER AND PRESSURE VESSEL CODE - MATERIALS - NONFERROUS MATERIAL SPECIFICATIONS |
| BS 7448-2:1997 | Fracture mechanics toughness tests Method for determination of KIc, critical CTOD and critical J values of welds in metallic materials |
| ASME PV CODE 2A : 2017 | BOILER AND PRESSURE VESSEL CODE - MATERIALS - FERROUS MATERIAL SPECIFICATIONS (BEGINNING TO SA-450) AND (SA-451 TO END) |
| ASME B16.9 : 2012 | FACTORY-MADE WROUGHT BUTTWELDING FITTINGS |
| API 570 : 2016 | PIPING INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION OF PIPING SYSTEMS |
| ASME PV CODE 3 APP DIV 1 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR THE CONSTRUCTION OF NUCLEAR FACILITY COMPONENTS - APPENDICES |
| ASTM E 8 : 2004 | Standard Test Methods for Tension Testing of Metallic Materials |
| ASME PV CODE 2D CUSTOMARY : 2017 | BOILER AND PRESSURE VESSEL CODE - MATERIALS - PROPERTIES (CUSTOMARY) |
| API 572 : 2016 | INSPECTION PRACTICES FOR PRESSURE VESSELS |
| ISO 3057:1998 | Non-destructive testing — Metallographic replica techniques of surface examination |
| ASTM A 671 : 2009 | Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures |
| ASME PV CODE 11 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR INSERVICE INSPECTION OF NUCLEAR POWER PLANT COMPONENTS |
| API 577 : 2013 | WELDING PROCESSES, INSPECTION, AND METALLURGY |
| DIN 2413-1:1993-10 | STEEL PIPES - DESIGN OF STEEL PRESSURE PIPES |
| NACE SP 02 96 : 2010 | DETECTION, REPAIR, AND MITIGATION OF CRACKING IN REFINERY EQUIPMENT IN WET H[2]S ENVIRONMENTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.