AOP 20 : 2017
Current
Current
The latest, up-to-date edition.
SAFETY, ARMING AND FUNCTIONING SYSTEMS MANUAL OF TESTS
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
27-02-2017
Publisher
1. SCOPE
2. APPLICABLE DOCUMENTS
3. DEFINITIONS
4. GENERAL REQUIREMENTS
5. DETAILED REQUIREMENTS
6. NOTES
ANNEX A - MECHANICAL SHOCK TESTS
ANNEX B - VIBRATION TESTS
ANNEX C - CLIMATIC TESTS
ANNEX D - SAFETY, ARMING AND FUNCTIONING TESTS
ANNEX E - AIRCRAFT MUNITION TESTS
ANNEX F - ELECTRICAL AND ELECTROMAGNETIC INFLUENCE TESTS
ANNEX G - STATISTICAL METHODS TO DETERMINE THE INITIATION
PROBABILITY OF ONE-SHOT DEVICES
Pertains to all Safe, Arming and Functioning Systems (SAF Systems), including Fuzes, Fuzing Systems, Ignition Systems, as well as components of weapon systems serving a Fuzing or Ignition function, such as torpedo exploders, underwater mine-firing mechanisms, and solid propellant rocket and guided missile motor ignition.
| DocumentType |
Standard
|
| Pages |
228
|
| PublisherName |
NATO
|
| Status |
Current
|
| Supersedes |
| STANAG 4518 : 0 | DEMILITARIZATION AND DISPOSAL OF MUNITIONS, PRINCIPLES FOR DESIGN FEATURES AND ASSESSMENT |
| DEFSTAN 59-114(PT2)/1(2012) : 2012 | SAFETY PRINCIPLES FOR ELECTRICAL CIRCUITS IN SYSTEMS INCORPORATING EXPLOSIVE COMPONENTS - PART 2: ELECTRO-EXPLOSIVE DEVICES AND THEIR CHARACTERIZATION |
| AAS3P-1 : 2011 | ALLIED AMMUNITION SAFETY AND SUITABILITY FOR SERVICE ASSESSMENT TESTING PUBLICATION - GUIDANCE |
| AAS3P-20 : 2017 | SAFETY AND SUITABILITY FOR SERVICE ASSESSMENT TESTING OF LARGE CALIBER AMMUNITION GREATER THAN 40MM |
| AOP 39 : 2010 | GUIDANCE ON THE ASSESSMENT AND DEVELOPMENT OF INSENSITIVE MUNITIONS (IM) |
| STANAG 4560 : 2016 | ELECTRO-EXPLOSIVE DEVICES, ASSESSMENT AND TEST METHODS FOR CHARACTERIZATION - AOP-43 EDITION 3 |
| MIL-STD-1316 Revision F:2017 | Fuze Design, Safety Criteria for |
| STANAG 4187 : 2007 | FUZING SYSTEMS - SAFETY DESIGN REQUIREMENTS |
| STANAG 4599 : 2007 | WEAPON LAUNCHED GRENADE SYSTEMS, DESIGN SAFETY REQUIREMENTS AND SAFETY AND SUITABILITY FOR SERVICE EVALUATION |
| STANAG 4516 : 0 | CANNON (12.7 TO 40MM), DESIGN SAFETY REQUIREMENTS AND SAFETY AND SUITABILITY FOR SERVICE EVALUATION |
| AAS3P-12 : 2017 | SAFETY AND SUITABILITY FOR SERVICE ASSESSMENT TESTING FOR AIRCRAFT LAUNCHED MUNITIONS |
| STANAG 4497 : 2016 | HAND-EMPLACED MUNITIONS (HEM), PRINCIPLES FOR SAFE DESIGN |
| AAS3P-11 : 2017 | SAFETY AND SUITABILITY FOR SERVICE ASSESSMENT TESTING FOR SURFACE AND UNDERWATER LAUNCHED MUNITIONS |
| STANAG 4368 : 2011 | IGNITION SYSTEMS FOR ROCKET AND GUIDED MISSILE MOTORS, SAFETY DESIGN REQUIREMENTS |
| AAS3P-10 : 2011 | SAFETY AND SUITABILITY FOR SERVICE ASSESSMENT TESTING FOR SHOULDER LAUNCHED MUNITIONS |
| AOP 38 : 2006 | SPECIALIST GLOSSARY OF TERMS AND DEFINITIONS ON AMMUNITION SAFETY |
| STANAG 4297 : 0 | GUIDANCE ON THE ASSESSMENT OF THE SAFETY AND SUITABILITY FOR SERVICE OF MUNITIONS FOR NATO ARMED FORCES - AOP-15 |
| MIL-STD-648 Revision E:2016 | Specialized Shipping Containers |
| MIL-HDBK-505 Base Document:1998 | Definitions of Item Levels, Item Exchangeability, Models, and Related Terms |
| STANAG 4224 : 2007 | LARGE CALIBRE ARTILLERY AND NAVAL GUN AMMUNITION GREATER THAN 40 MM, SAFETY AND SUITABILITY FOR SERVICE EVALUATION |
| MIL-HDBK-1512 Base Document:1997 | ELECTROEXPLOSIVE SUBSYSTEMS, ELECTRICALLY INITIATED, DESIGN REQUIREMENTS AND TEST METHODS |
| AECTP-400 : 2006 | MECHANICAL ENVIRONMENTAL TESTS |
| ASTM G 21 : 2015 : REDLINE | Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi |
| STANAG 4187 : 2007 | FUZING SYSTEMS - SAFETY DESIGN REQUIREMENTS |
| MIL-DTL-12560 Revision K:2013 | ARMOR PLATE, STEEL, WROUGHT, HOMOGENEOUS (FOR USE IN COMBAT-VEHICLES AND FOR AMMUNITION TESTING) |
| MIL-STD-810 Revision G:2008 | ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS |
| MIL-STD-167-2 Revision A:1992 | MECHANICAL VIBRATIONS OF SHIPBOARD EQUIPMENT (RECIPROCATING MACHINERY AND PROPULSION SYSTEM AND SHAFTING) TYPES III, IV, AND V (CONTROLLED DISTRIBUTION) |
| STANAG 4157 : 2017 | SAFETY, ARMING AND FUNCTIONING SYSTEMS (SAF SYSTEMS) TESTING REQUIREMENTS |
| AOP 42 : 2009 | INTEGRATED DESIGN ANALYSIS FOR MUNITION INITIATION AND OTHER SAFETY CRITICAL SYSTEMS |
| STANAG 4629 : 2011 | SAFETY AND SUITABILITY FOR SERVICE ASSESSMENT TESTING OF NON-NUCLEAR MUNITIONS |
| SAE AMS6385K | Steel Sheet, Strip, and Plate, Low Alloy, Heat-Resistant 0.65Si - 1.25Cr - 0.50Mo - 0.25V (0.27 - 0.33C) |
| MIL-STD-1316 Revision F:2017 | Fuze Design, Safety Criteria for |
| EN 10025:1990/A1:1993 | HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS |
| STANAG 4382 : 2003 | SLOW HEATING, MUNITIONS TEST PROCEDURES |
| AOP 21 : 2016 | INITIATION SYSTEMS: CHARACTERISATION AND SAFETY TEST METHODS AND PROCEDURES FOR DETONATING EXPLOSIVE COMPONENTS |
| ASTM B 124 : 2008 | SPECIFICATION FOR COPPER AND COPPER ALLOY FORGING ROD, BAR AND SHAPES |
| STANAG 4241 : 2003 | BULLET IMPACT, MUNITION TEST PROCEDURES |
| ASTM B 121/B121M : 2016 : REDLINE | Standard Specification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar |
| AECTP-500 : 2016 | ELECTROMAGNETIC ENVIRONMENTAL EFFECTS TESTS AND VERIFICATION |
| STANAG 4363 : 2016 | INITIATION SYSTEMS: TESTING FOR THE ASSESSMENT OF DETONATING EXPLOSIVE COMPONENTS - AOP-21 EDITION 3 |
| AECTP-600 : 2007 | THE TEN STEP METHOD FOR EVALUATING THE ABILITY OF MATERIEL TO MEET EXTENDED LIFE REQUIREMENTS AND ROLE AND DEPLOYMENT CHANGES |
| IEEE/ASTM SI_10-2010 | American National Standard for Metric Practice |
| AOP 7 : 2006 | MANUAL OF DATA REQUIREMENTS AND TESTS FOR THE QUALIFICATION OF EXPLOSIVE MATERIALS FOR MILITARY USE |
| MIL-DTL-23659 Revision F:2010 | Initiators, Electric, General Design Specification for |
| AECTP-100 : 2016 | ENVIRONMENTAL GUIDELINES FOR DEFENCE MATERIEL |
| STANAG 4497 : 2016 | HAND-EMPLACED MUNITIONS (HEM), PRINCIPLES FOR SAFE DESIGN |
| STANAG 4170 : 2008 | PRINCIPLES AND METHODOLOGY FOR THE QUALIFICATION OF EXPLOSIVE MATERIALS FOR MILITARY USE |
| STANAG 4370 : 2016 | ENVIRONMENTAL TESTING |
| STANAG 4368 : 2011 | IGNITION SYSTEMS FOR ROCKET AND GUIDED MISSILE MOTORS, SAFETY DESIGN REQUIREMENTS |
| STANAG 4375 : 2010 | SAFETY DROP, MUNITION TEST PROCEDURE |
| STANAG 4240 : 2003 | LIQUID FUEL/EXTERNAL FIRE, MUNITION TEST PROCEDURES |
| AECTP-200 : 2009 | ENVIRONMENTAL CONDITIONS |
| ISO 80000-1:2009 | Quantities and units — Part 1: General |
| STANAG 2895 : 1990 | EXTREME CLIMATIC CONDITIONS AND DERIVED CONDITIONS FOR USE IN DEFINING DESIGN/TEST CRITERIA FOR NATO FORCES MATERIAL |
| SAE AS8660 | Silicone Compound NATO Code Number S-736 |
| AOP 4157 : 2017 | SAFETY, ARMING AND FUNCTIONING SYSTEMS (SAF SYSTEMS) TESTING REQUIREMENTS |
| STANAG 4225 : 0 | THE SAFETY EVALUATION OF MORTAR BOMBS |
| MIL-STD-322 Revision B:1984 | Explosive Components, Electrically Initiated, Basic Evaluation Tests for |
| ASTM D 4549 : 2015 : REDLINE | Standard Classification System and Basis for Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS) |
| MIL-T-18404 Base Document:1955 | TORPEDOES, ENVIRONMENTAL REQUIREMENTS; GENERAL SPECIFICATION FOR |
| STANAG 4439 : 2010 | POLICY FOR INTRODUCTION AND ASSESSMENT OF INSENSITIVE MUNITIONS (IM) |
| AECTP-300 : 2006 | CLIMATIC ENVIRONMENTAL TESTS |
| SAE AMS QQ A 225/8 : 1998 | ALUMINUM ALLOY 6061, BAR, ROD, WIRE, AND SPECIAL SHAPES; ROLLED, DRAWN, OR COLD FINISHED |
| MIL-STD-202 Revision H:2015 | ELECTRONIC AND ELECTRICAL COMPONENT PARTS |
| STANAG 4238 : 2002 | MUNITION DESIGN PRINCIPLES, ELECTRICAL/ELECTROMAGNETIC ENVIRONMENTS |
| SAE AMSQQA225/6A | Aluminum Alloy, 2024, Bar, Rod, and Wire; Rolled, Drawn, or Cold Finished |
| AOP 8 : 1990 | |
| MIL-STD-331 Revision D:2017 | FUZES, IGNITION SAFETY DEVICES AND OTHER RELATED COMPONENTS, ENVIRONMENTAL AND PERFORMANCE TESTS FOR |
| AOP 43 : 2016 | ELECTRO-EXPLOSIVE DEVICES, ASSESSMENT AND TEST METHODS FOR CHARACTERIZATION - GUIDELINES FOR STANAG 4560 |
| MIL-STD-167-1 Revision A:2005 | MECHANICAL VIBRATIONS OF SHIPBOARD EQUIPMENT (TYPE 1 - ENVIRONMENTAL AND TYPE 2 - INTERNALLY EXCITED) |
| STANAG 4560 : 2016 | ELECTRO-EXPLOSIVE DEVICES, ASSESSMENT AND TEST METHODS FOR CHARACTERIZATION - AOP-43 EDITION 3 |
Important note : All end users must be registered with an Account prior to user licenses being assigned.Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.