ANSI H35.2 : 2017
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
DIMENSIONAL TOLERANCES FOR ALUMINUM MILL PRODUCTS
Available format(s)
Hardcopy , PDF
Superseded date
24-09-2024
Superseded by
Language(s)
English
Published date
12-05-2017
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.| DevelopmentNote |
Supersedes SAE AMS 2201, SAE AMS 2202, SAE AMS 2203, SAE MAM 2203, SAE AMS 2204, SAE AMS 2205. (07/1999) Supersedes MIL A 52174. (05/2004) Supersedes SAE AMS 2205 (07/2004) Also available in online format. (05/2017)
|
| DocumentType |
Standard
|
| Pages |
57
|
| PublisherName |
Aluminum Association
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| SAE AMS 4319 : 2013 | ALUMINUM ALLOY, ROLLED OR COLD FINISHED, BARS AND RODS 12.2SI - 1.0MG - 0.90CU - 0.90NI (4032-T651) SOLUTION HEAT TREATED, STRESS-RELIEVED, AND ARTIFICIALLY AGED |
| SAE AMS 4069 : 2015 | ALUMINUM ALLOY, DRAWN, ROUND SEAMLESS TUBING, CLOSE TOLERANCE, 2.5MG - 0.25CR (5052-0) ANNEALED |
| SAE AMS 4113 : 2014 | ALUMINUM ALLOY, EXTRUDED PROFILES 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-T6) SOLUTION AND PRECIPITATION HEAT TREATED |
| AASHTO M 181 :2010 | SPECIFICATION FOR CHAIN-LINK FENCE |
| SAE AMS 4202 : 2005 | ALUMINUM ALLOY, PLATE - 5.7ZN - 2.2MG - 1.6CU - 0.22CR (7475-T7351), SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, AND PRECIPITATION HEAT TREATED |
| ASTM B 317/B317M : 2007 | Standard Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, Structural Profiles, and Profiles for Electrical Purposes (Bus Conductor) |
| SAE AMS 4295 : 2013 | ALUMINUM ALLOY SHEET AND PLATE, 6.3CU - 0.30MN - 0.06TI - 0.10V - 0.18ZR (2219 - O, F, T31, T351, T37, T81, T851, T87) |
| SAE AMS 4306 : 2018 | ALUMINUM ALLOY, PLATE, 6.4ZN - 2.4MG - 2.2CU - 0.12ZR (7150-T6151), SOLUTION HEAT TREATED, STRESS RELIEVED, AND AGED |
| SAE AMS 4083 : 2012 | ALUMINUM ALLOY TUBING, HYDRAULIC, SEAMLESS, DRAWN, ROUND, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-T6), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4347 : 2014 | ALUMINUM ALLOY SHEET, 1.0MG - 0.8SI - 0.8CU - 0.5MN (6013-T4), SOLUTION HEAT TREATED AND NATURALLY AGED |
| SAE AMS 4159 : 2015 | ALUMINUM ALLOY, EXTRUSIONS 7.7ZN - 2.4MG - 1.6CU - 0.16CR (7049-T76511) SOLUTION HEAT TREATED, STRESS RELIEVED, STRAIGHTENED, AND OVERAGED |
| SAE AMS 4401 : 2011 | ALUMINUM ALLOY PLATE (7140-T7451), 6.6ZN - 1.8CU - 2.0MG - 0.10ZR, SOLUTION HEAT TREATED, STRESS RELIEVED AND OVERAGED (COMPOSITION SIMILAR TO UNS A97140) |
| SAE AMS 4182 : 2016 | ALUMINUM ALLOY, WIRE, 5.0MG - 0.12MN - 0.12CR (5056-0), ANNEALED |
| SAE AMS 4364 : 2016 | ALUMINUM ALLOY, PLATE, 7.9ZN - 1.8CU - 2.0MG - 0.10ZR (7099-T7651) SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
| SAE AMS 4184 : 2016 | FILLER METAL, ALUMINUM BRAZING, 10SI - 4.0CU (4145) |
| ASTM B 211 : 2012 | Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire |
| MIL-DTL-46192 Revision C:1998 | ALUMINUM ALLOY ARMOR ROLLED PLATE (1/2 TO 4 INCHES THICK), WELDABLE (ALLOY 2519) |
| SAE AMS 4465 : 2015 | ALUMINUM ALLOY, CLAD ONE SIDE SHEET, 0.6MG - 0.35SI - 0.28CU (NO. 23 BRAZING SHEET), AS FABRICATED |
| SAE AMS 4064 : 2013 | ALUMINUM ALLOY, CLAD TWO SIDES SHEET, 1.25MN - 0.12CU (NO. 12-0 BRAZING SHEET), ANNEALED |
| MIL-DTL-46063 Revision H:1998 | ARMOR PLATE, ALUMINUM ALLOY, 7039 |
| QQ-A-225 Revision G:1990 | ALUMINUM AND ALUMINUM ALLOY BAR, ROD, WIRE, OR SPECIAL SHAPES, ROLLED, DRAWN, OR COLD FINISHED, GENERAL SPECIFICATION FOR |
| SAE AMS 4613 : 2017 | ALUMINUM ALLOY, SHEET AND PLATE, 6.3CU - 0.30MN - 0.06TI - 0.10V - 0.18ZR, SOLUTION HEAT TREATED, COLD WORKED (8%) AND PRECIPITATION HEAT TREATED (2219 -T87) |
| SAE AMS B 20148 : 2016 | BRAZING SHEET, ALUMINUM ALLOY |
| MIL A 46192 : B | ALUMINUM ALLOY ARMOR ROLLED PLATE (1/2 TO 4 INCHES THICK), WELDABLE (ALLOY 2519) |
| SAE AMS 7913 : 2015 | ALUMINUM-BERYLLIUM ALLOY, SHEET AND PLATE, 38AL - 62BE |
| FED-STD-245 Revision E:1985 | TOLERANCES FOR ALUMINUM ALLOY AND MAGNESIUM ALLOY WROUGHT PRODUCTS |
| SAE AMS 4330 : 2018 | ALUMINUM ALLOY, PLATE (2297-T87), 2.8CU - 1.5LI - 0.30MN - 0.12ZR, SOLUTION HEAT TREATED, STRETCHED, AND ARTIFICIALLY AGED |
| SAE AMS 4416 : 2017 | ALUMINUM ALLOY, EXTRUDED PROFILES (2196-T8511) 2.9CU - 1.7LI - 0.4MG - 0.4AG - 0.10ZR SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING AND ARTIFICIALLY AGED |
| SAE AMS 4332 : 2012 | ALUMINUM ALLOY, EXTRUDED PROFILES (7349-T76511) 8.1ZN - 1.7CU - 2.2MG - 0.16ZR SOLUTION HEAT TREATED, STRESS-RELIEVED, AND OVERAGED |
| SAE AMS 4276 : 2018 | ALUMINUM ALLOY, SHEET - 4.4CU - 1.5MG - 0.60MN (2024-O) ANNEALED, FINE GRAINED |
| SAE AMS 4473 : 2017 | ALUMINUM ALLOY PLATE (2624-T39), 4.1CU - 1.4MG - 0.6MN, SOLUTION HEAT TREATED, COLD WORKED AND NATURALLY AGED |
| MIL-DTL-46083 Revision D:1998 | ALUMINUM ALLOY ARMOR, EXTRUDED, WELDABLE |
| MIL-C-8603 Revision B:1984 | CLAMPS, LOOP TYPE, AND STRAPS, SUPPORT |
| SAE AMS 4462 : 2018 | ALUMINUM ALLOY, SHEET AND PLATE, ALCLAD, 4.4CU - 1.5MG - 0.60MN (ALCLAD 2024, -T3 SHEET, -T351 PLATE), SOLUTION HEAT TREATED, COLD WORKED AND NATURALLY AGED |
| SAE AMS 4203 : 2012 | ALUMINUM ALLOY, PLATE, 6.2ZN - 1.8CU - 2.4MG - 0.13ZR (7010-T7351) SOLUTION HEAT TREATED, STRESS RELIEVED AND PRECIPITATION HEAT TREATED (COMPOSITION SIMILAR TO UNS A97010) |
| SAE AMS 4015 : 2018 | ALUMINUM ALLOY, SHEET AND PLATE 2.5MG - 0.25CR (5052-O) ANNEALED |
| ASTM B 736 : 2000 : R2006 | Standard Specification for Aluminum, Aluminum Alloy and Aluminum-Clad Steel Cable Shielding Stock (Withdrawn 2015) |
| SAE AMS 4162 : 2014 | ALUMINUM ALLOY, EXTRUSIONS, 6.3CU - 0.30MN - 0.18ZR - 0.10V - 0.06TI (2219-T8511), SOLUTION TREATED, STRESS RELIEF STRETCHED, STRAIGHTENED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4413 : 2012 | ALUMINUM ALLOY, PLATE, 3.5 CU - 1.0LI - .40MG - .35 MN - .45AG - 0.12ZR (2050-T84), SOLUTION HEAT TREATED, STRESS RELIEVED, AND ARTIFICIALLY AGED |
| SAE AMS 4345 : 2012 | ALUMINUM ALLOY, EXTRUSIONS - 6.4ZN - 2.4MG - 2.2CU - 0.12ZR (7150-T77511) SOLUTION HEAT TREATED, STRESS-RELIEVED, STRAIGHTENED, AND OVERAGED |
| SAE AMS 4048 : 2016 | ALUMINUM ALLOY SHEET AND PLATE, ALCLAD 5.6ZN - 2.5MG - 1.6CU - 0.23CR (ALCLAD 7075-O) ANNEALED OR WHEN SPECIFIED, 'AS FABRICATED' (ALCLAD 7075-F) |
| SAE AMS 4026 : 2014 | ALUMINUM ALLOY, SHEET AND PLATE, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061; -T4 SHEET, -T451 PLATE), SOLUTION HEAT TREATED AND NATURALLY AGED |
| SAE AMS 4027 : 2014 | ALUMINUM ALLOY, SHEET AND PLATE, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061; -T6 SHEET, -T651 PLATE), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4374 : 2016 | ALUMINUM ALLOY, EXTRUDED PROFILES, 8.9ZN - 2.2CU - 2.2MG - 0.15ZR (7136-T73511), SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, STRAIGHTENED, AND OVERAGED |
| SAE AMSWWT700B:2001(S2018) | TUBE, ALUMINIUM AND ALUMINIUM ALLOY, DRAWN, SEAMLESS, GENERAL SPECIFICATION FOR |
| SAE AMS 4344 : 2011 | ALUMINUM ALLOY, EXTRUSIONS, 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7175-T73511), SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, STRAIGHTENED, AND OVERAGED |
| ASTM B 928/B928M : 2015 : REDLINE | Standard Specification for High Magnesium Aluminum-Alloy Products for Marine Service and Similar Environments |
| SAE AMS 4130 : 2014 | ALUMINUM ALLOY DIE FORGINGS, 4.4CU - 0.85SI - 0.80MN (2025-T6), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4046 : 2017 | ALUMINUM ALLOY, SHEET AND PLATE, ALCLAD ONE SIDE 5.6ZN - 2.5MG - 1.6CU - 0.23CR (ALCLAD ONE SIDE 7075; -T6 SHEET -T651 PLATE) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4049 : 2016 | ALUMINUM ALLOY, SHEET AND PLATE, ALCLAD 5.6ZN - 2.5MG - 1.6CU - 0.23CR (ALCLAD 7075; -T6 SHEET - T651 PLATE) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4350 : 2017 | MAGNESIUM ALLOY, EXTRUSIONS 6.5A1 - 0.95ZN (AZ61A-F) AS EXTRUDED |
| SAE AMS 4213 : 2016 | ALUMINUM ALLOY PLATE (2027-T351) 4.4CU - 1.2MG - 0.8MN - 0.10ZR, SOLUTION HEAT TREATED, COLD WORKED AND NATURALLY AGED |
| SAE AMS 4268 : 2017 | ALUMINUM ALLOY, SHEET AND PLATE, 4.4CU - 1.5MG - 0.60MN; (2024-T81 SHEET, -T851 PLATE), SOLUTION HEAT TREATED, COLD WORKED AND ARTIFICIALLY AGED |
| SAE AMS 4415 : 2015 | ALUMINUM ALLOY EXTRUSIONS, 8.9ZN - 2.2CU - 2.2MG - 0.15ZR (7136-T76511, -T76510) SOLUTION HEAT TREATED, STRESS-RELIEVED, STRAIGHTENED, AND OVERAGED |
| SAE AMS 4459 : 2013 | ALUMINUM ALLOY, EXTRUSION, 2.7CU - 1.8LI - 0.7ZN - 0.3MN - 0.3MG - 0.08ZR (2099-T81), SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING 1 TO 3% AND AGED |
| ASTM B 317/B317M : 2007 : R2015 : EDT 1 | Standard Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, Structural Profiles, and Profiles for Electrical Purposes (Bus Conductor) |
| SAE AMS 4287 : 2013 | ALUMINUM ALLOY, EXTRUSION, 2.7 CU - 1.8 LI - 0.7 ZN - 0.3 MN - 0.3 MG - 0.08 ZR (2099-T83), SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING 1% TO 4% AND AGED |
| ASTM B 491/B491M : 2015 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Extruded Round Tubes for General-Purpose Applications |
| SAE AMS QQ A 200 : 2004 | ALUMINUM ALLOY, BAR, ROD, SHAPES, STRUCTURAL SHAPES, TUBE, AND WIRE, EXTRUDED: GENERAL SPECIFICATION FOR |
| ASTM B 317/B317M : 2007 : R2015 | Standard Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, Structural Profiles, and Profiles for Electrical Purposes (Bus Conductor) |
| ASTM B 316/B316M : 2015 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods |
| SAE AMS 4468 : 2012 | ALUMINUM ALLOY, PLATE, 5.0CU - 0.4MN - 0.5MG - 0.4AG (2139-T84), SOLUTION HEAT TREATED, COLD WORKED, AND ARTIFICIALLY AGED (COMPOSITION SIMILAR TO UNS A92139) |
| SAE AMS 4140 : 2014 | ALUMINUM ALLOY DIE FORGINGS, 4.0CU - 2.0NI - 0.68MG (2018-T61), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4035 : 2017 | ALUMINUM ALLOY, SHEET AND PLATE, 4.4CU - 1.5MG - 0.60MN (2024-0) ANNEALED; OR WHEN SPECIFIED, 'AS FABRICATED' (2024-F) |
| SAE AMS 4086 : 2015 | ALUMINUM ALLOY, DRAWN, ROUND, SEAMLESS HYDRAULIC TUBING, 4.4CU - 1.5MG - 0.6MN (2024-T3), SOLUTION HEAT TREATED, COLD WORKED AND NATURALLY AGED |
| ASTM B 209 : 2014 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate |
| ASTM B 236 : 2007 : R2015 | Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) |
| SAE AMS 4257 : 2014 | ALUMINUM ALLOY, EXTRUSION 3.7CU - 1.15LI - 0.5ZN - 0.45AG - 0.4MG - 0.3MN - 0.1ZR (2055-T84) SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING 2% TO 5% AND AGED |
| SAE AMS 4172 : 2013 | ALUMINUM ALLOY, EXTRUSIONS 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-T4511 OR T4510) SOLUTION HEAT TREATED AND STRESS RELIEVED BY STRETCHING |
| SAE AMS 4274 : 2013 | ALUMINUM ALLOY, ALCLAD SHEET, 4.4CU - 1.5MG - 0.60MN (ALCLAD 2024-0), ANNEALED, FINE GRAIN |
| SAE AMS 4466 : 2017 | ALUMINUM ALLOY, SHEET AND PLATE, ALCLAD, 4.4CU - 1.5MG - 0.60MN (ALCLAD 2024, -T361 SHEET & PLATE), SOLUTION HEAT TREATED, 6% COLD WORKED AND NATURALLY AGED |
| SAE AMS 4472 : 2017 | ALUMINUM ALLOY, PLATE, 4.0CU - 1.0LI - 0.40MG - 0.35AG - 0.13ZR (2195-T34), SOLUTION HEAT TREATED AND STRESS RELIEVED |
| SAE AMS 4256 : 2018 | ALUMINUM ALLOY, CLAD TWO SIDES SHEET - 0.6MG - 0.35SI - 0.28CU (NO. 22 BRAZING SHEET) AS FABRICATED |
| SAE AMS 4148 : 2017 | ALUMINUM ALLOY DIE FORGINGS (7175-T66) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4164 : 2013 | ALUMINUM ALLOY, EXTRUSIONS, 4.4CU - 1.5MG - 0.60MN (2024-T3510), STRESS-RELIEF STRETCHED, UNSTRAIGHTENED |
| SAE AMS 4068 : 2015 | ALUMINUM ALLOY, DRAWN SEAMLESS TUBING, 6.3CU - 0.30MN - 0.18ZR - 0.10V - 0.06TI (2219-T3511), SOLUTION HEAT TREATED AND STRESS RELIEVED BY STRETCHING |
| SAE AMS 4296 : 2017 | ALUMINUM ALLOY, ALCLAD SHEET AND PLATE 4.3CU - 1.4MG - 0.60MN (ALCLAD 2524-T3) SOLUTION HEAT TREATED AND COLD WORKED |
| SAE AMS 4081 : 2014 | ALUMINUM ALLOY TUBING, HYDRAULIC, SEAMLESS, DRAWN, ROUND, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-T4) SOLUTION HEAT TREATED AND NATURALLY AGED |
| SAE AMS 4186 : 2012 | ALUMINUM ALLOY, BARS, RODS, AND WIRE, ROLLED OR COLD FINISHED, 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-F), AS FABRICATED OR WHEN SPECIFIED, ANNEALED (7075-O) |
| SAE AMS 4141 : 2014 | ALUMINUM ALLOY DIE FORGINGS, 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T73), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4476 : 2013 | ALUMINUM ALLOY, EXTRUSIONS 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-O), ANNEALED |
| API 620 : 2013 | DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS |
| SAE AMS 4094 : 2018 | ALUMINUM ALLOY, SHEET AND PLATE, ALCLAD 6.3CU - 0.30MN - 0.18ZR - 0.10V - 0.06TI ALCLAD 2219-T81 SHEET SOLUTION HEAT TREATED, COLD WORKED, AND PRECIPITATION HEAT TREATED ALCLAD 2219-T851 PLATE SOLUTION HEAT TREATED, STRESS RELIEVED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4405 : 2012 | ALUMINUM ALLOY, ALCLAD SHEET (6156-T4), 1.0SI - 0.90CU - 0.60MN - 0.90MG, SOLUTION HEAT TREATED AND NATURALLY AGED |
| SAE AMS 4361 : 2014 | ALUMINUM ALLOY, PLATE (7065-T7451) 7.7ZN - 2.1CU - 1.65MG - 0.10ZR SOLUTION HEAT TREATED, STRESS-RELIEVED, AND OVERAGED |
| SAE AMS 4469 : 2013 | ALUMINUM ALLOY TUBING, SEAMLESS, DRAWN, 1.8 CU - 1.0 MG - 0.8 SI - 0.20 CR, SOLUTION HEAT TREATED, STRESS-RELIEVED BY STRETCHING, AND AGED (2013-T4511) |
| SAE AMS 4617 : 2017 | ALUMINUM ALLOY, EXTRUSIONS, 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T73, 7075-T73511, 7075-T73510), SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING WHEN REQUIRED, AND OVERAGED |
| SAE AMS 4128 : 2013 | ALUMINUM ALLOY BARS, ROLLED OR COLD FINISHED, 1.0MG - 0.60SI - 0.30CU - 0.20CR (6061-T451), SOLUTION HEAT TREATED AND STRESS RELIEVED BY STRETCHING |
| SAE AMS 4411 : 2013 | ALUMINUM ALLOY PLATE (7081-T7651), 7.2ZN - 1.5CU - 2.0MG - 0.10ZR, SOLUTION HEAT TREATED, STRESS RELIEVED AND OVERAGED |
| SAE AMS 4133 : 2014 | ALUMINUM ALLOY FORGINGS AND ROLLED RINGS, 4.4CU - 0.85SI - 0.80MN - 0.50MG (2014-T6), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4208 : 2016 | ALUMINUM ALLOY SHEET, 6.0CU - 0.40ZR - (2004-F), AS ROLLED |
| SAE AMS 4050 : 2014 | ALUMINUM ALLOY, PLATE, 6.2ZN - 2.3CU - 2.2MG - 0.12ZR (7050-T7451), SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
| SAE AMS 4111 : 2014 | ALUMINUM ALLOY FORGINGS, 7.7ZN - 2.5MG - 1.5CU - 0.16CR (7049-T73), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4298 : 2016 | ALUMINUM ALLOY, ALCLAD SHEET 3.8CU - 1.0MG - 0.30MN - 0.60ZN (ALCLAD 2056-T3) SOLUTION HEAT TREATED AND COLD WORKED |
| SAE AMS 4216 : 2013 | ALUMINUM ALLOY, SHEET, 1.0MG - 0.8SI - 0.8CU - 0.50MN, (6013-T6), SOLUTION HEAT TREATED AND ARTIFICIALLY AGED |
| SAE AMS 4156 : 2015 | ALUMINUM ALLOY, EXTRUSIONS 0.68MG - 0.40SI (6063-T6) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4470 : 2012 | ALUMINUM ALLOY, PLATE (7085-T7451), 7.5ZN - 1.6CU - 1.5MG - 0.12ZR, SOLUTION HEAT TREATED, STRESS-RELIEVED, AND OVERAGED |
| SAE AMS 4320 : 2014 | ALUMINUM ALLOY FORGINGS, 7.7ZN - 2.5MG - 1.5CU - 0.16CR (7149-T73), SOLUTION AND PRECIPITATION HEAT TREATED |
| AWS D3.7 : 2004 | GUIDE FOR ALUMINUM HULL WELDING |
| SAE AMS 4357 : 2016 | ALUMINUM ALLOY, DIE FORGINGS 3.5CU - 1.0LI - 0.04MG - 0.35MN - 0.45AG - 0.12ZR (2050-T852) SOLUTION HEAT TREATED, COLD WORKED AND ARTIFICIALLY AGED |
| SAE AMS 4194 : 2018 | ALUMINUM ALLOY, SHEET AND PLATE, ALCLAD 4.4CU - 1.5MG - 0.60MN (2024 -T361 SHEET/PLATE WITH 1-1/2% ALCLAD) SOLUTION HEAT TREATED, 6% COLD WORKED AND NATURALLY AGED |
| ASAE S263.3 : 1998 | MINIMUM STANDARDS FOR ALUMINUM SPRINKLER IRRIGATION TUBING |
| SAE AMS 4031 : 2017 | ALUMINUM ALLOY, SHEET AND PLATE, 6.3CU - 0.30MN - 0.18ZR - 0.10V - 0.06TI (2219-O) ANNEALED OR WHEN SPECIFIED, 'AS FABRICATED' (2219-F) |
| SAE AMS 4157 : 2018 | ALUMINUM ALLOY EXTRUSIONS, 7.7ZN - 2.4MG - 1.6CU - 0.16CR (7049-T73511), SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
| SAE AMS 4327 : 2016 | ALUMINUM ALLOY, PLATE (2098-O), 3.5CU - 1.1LI - 0.50MG - 0.40AG - 0.11ZR, ANNEALED |
| SAE AMS 4464 : 2017 | ALUMINUM ALLOY PLATE (2624-T351) 4.1CU - 1.4MG - 0.6MN, SOLUTION HEAT TREATED, COLD WORKED AND NATURALLY AGED |
| SAE AMS 4125 : 2014 | Aluminum Alloy Die Forgings, and Rolled or Forged Rings 0.9Si - 0.62Mg - 0.25Cr (6151-T6) Solution and Precipitation Heat Treated |
| SAE AMS 4329 : 2017 | ALUMINUM ALLOY, PLATE (7085-T7651), 7.5ZN - 1.6CU - 1.5MG - 0.12ZR, SOLUTION HEAT TREATED, STRESS-RELIEVED, AND OVERAGED |
| SAE AMS 4036 : 2017 | ALUMINUM ALLOY SHEET AND PLATE, ALCLAD ONE SIDE 4.4CU - 1.5MG - 0.60MN ALCLAD ONE SIDE 2024 AND 1-1/2% ALCLAD ONE SIDE 2024-T3 SHEET; 1-1/2% ALCLAD ONE SIDE 2024-T351 PLATE |
| SAE AMS4204C | ALUMINUM ALLOY, PLATE, 6.2ZN - 1.8CU - 2.4MG - 0.13ZR (7010-T7651), SOLUTION HEAT TREATED, STRESS RELIEVED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4143 : 2012 | ALUMINUM ALLOY FORGINGS AND ROLLED OR FORGED RINGS, 6.3CU - 0.30MN - 0.18ZR - 0.10V - 0.06TI (2219-T6), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4353 : 2014 | ALUMINUM ALLOY, EXTRUDED ROUND ROD, 3.5CU - 1.0LI - 0.40MG - 0.45AG - 0.12ZR (2050-T84) SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, AND ARTIFICIALLY AGED |
| ASTM B 221 : 2014 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes |
| ASTM B 236 : 2007 | Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) |
| ASTM B 211 : 2012 : EDT 1 | Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire |
| SAE AMS 4403 : 2017 | ALUMINUM ALLOY, DIE FORGINGS, 7.5ZN - 1.6CU - 1.5MG - 0.12ZR (7085-T7452), SOLUTION HEAT TREATED, COMPRESSION STRESS-RELIEVED, AND OVERAGED |
| SAE AMS 4410 : 2013 | ALUMINUM ALLOY PLATE (7081-T7451), 7.2ZN - 1.5CU - 2.0MG - 0.10ZR, SOLUTION HEAT TREATED, STRESS RELIEVED AND OVERAGED |
| ASTM B 483/B483M : 2013 | Standard Specification for Aluminum and Aluminum-Alloy Drawn Pipe for General Purpose Applications |
| SAE AMS 4272 : 2015 | ALUMINUM ALLOY, ALCLAD SHEET AND PLATE (ALCLAD 2029-T8) 3.6 CU, 0.30 MN, 0.95 MG, 0.40 AG, 0.12 ZR SOLUTION HEAT TREATED, COLD WORKED AND AGED |
| SAE AMS 4115 : 2015 | ALUMINUM ALLOY, ROLLED OR COLD-FINISHED, BARS, RODS, WIRE, AND FLASH WELDED RINGS, ANNEALED, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-O) |
| SAE AMS 4078 : 2011 | ALUMINUM ALLOY SHEET AND PLATE, 5.6ZN - 2.5MG - 1.6CU - 0.23CR, 7075: (-T73 SHEET, -T7351 PLATE), SOLUTION HEAT TREATED AND OVERAGED |
| SAE AMS 4458 : 2016 | ALUMINUM ALLOY, PLATE (2.7 CU - 1.8 LI - 0.7 ZN) 2099-T86, SOLUTION HEAT TREATED, COLD WORKED AND ARTIFICIALLY AGED |
| MIL A 46118 : D | ALUMINUM ALLOY ARMOR, 2219, ROLLED PLATE AND DIE FORGED SHAPES |
| SAE AMS 4117 : 2015 | ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS, RODS, AND WIRE AND FLASH WELDED RINGS, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061; -T6, -T651) |
| SAE AMS 4278 : 2013 | ALUMINUM ALLOY, ALCLAD SHEET 5.6ZN - 2.5MG - 1.6CU - 0.23CR (ALCLAD 7075-0) ANNEALED, FINE GRAINED |
| SAE AMS 4269 : 2017 | ALUMINUM ALLOY, SHEET AND PLATE, 4.4CU - 1.5MG - 0.60MN; (2024-T361), SOLUTION HEAT TREATED AND COLD WORKED |
| SAE AS 4060 : 2013 | TUBE FITTINGS SWAGED JOINT, ROLLER EXPANDER, MANUAL PROCESS, REQUIREMENTS FOR |
| SAE AMS 4173 : 2013 | ALUMINUM ALLOY, EXTRUSIONS 1.0MG - 0.60SI - 0.30CU - 0.20CR (6061-T6511 OR T6510) SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, STRAIGHTENED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4325 : 2013 | ALUMINUM ALLOY, EXTRUDED WIDE PANEL PROFILES (7150-T77511), 6.4ZN - 2.4MG - 2.2CU - 0.12ZR, SOLUTION HEAT TREATED, STRESS-RELIEVED, STRAIGHTENED AND OVERAGED |
| SAE AMS 4200 : 2017 | ALUMINUM ALLOY PLATE, 7.7ZN - 2.4MG - 1.6CU - 0.16CR (7049-T7351), SOLUTION HEAT TREATED, STRESS RELIEVED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4412 : 2015 | ALUMINUM ALLOY, SHEET, 3.2CU - 0.52MG - 0.30AG - 0.12ZR (2198-T8), SOLUTION HEAT TREATED, COLD WORKED, AND ARTIFICIALLY AGED |
| SAE AMS 4365 : 2017 | ALUMINUM ALLOY, PLATE, 7.9ZN - 1.2CU - 2.1MG - 0.10ZR (7097-T7651) SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
| SAE AMS 4339 : 2018 | ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS AND RODS 4.4CU - 1.5MG - 0.60MN (2024-T-851) SOLUTION HEAT TREATED, COLD WORKED, AND ARTIFICIALLY AGED |
| ASTM B 736 : 2000 | Standard Specification for Aluminum, Aluminum Alloy and Aluminum-Clad Steel Cable Shielding Stock |
| MIL A 46027 : H | ARMOUR PLATE, ALUMINUM ALLOY, WELDABLE 5083 AND 5456 |
| SAE AMS 4154 : 2015 | ALUMINUM ALLOY, EXTRUSIONS 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T6, 7075-T6510, 7075-T6511) SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING WHEN REQUIRED AND PRECIPITATION HEAT TREATED |
| SAE AMS 4193 : 2017 | ALUMINUM ALLOY SHEET AND PLATE, 4.4CU - 1.5MG - 0.60MN (2024-T861), SOLUTION HEAT TREATED, COLD WORKED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4343 : 2012 | ALUMINUM ALLOY, EXTRUSIONS, 7.7ZN - 2.4MG - 1.6CU - 0.16CR, (7149-T73511) SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, AND OVERAGED |
| SAE AMS 4002 : 2018 | ALUMINUM ALLOY TUBING, SEAMLESS, DRAWN 1.8CU - 1.0MG - 0.8SI - 0.20CR SOLUTION HEAT TREATED, STRESS-RELIEVED BY STRETCHING, AND AGED (2013-T6511) |
| SAE AMS 4293 : 2013 | ALUMINUM ALLOY EXTRUSIONS, 7.9ZN - 1.6CU - 2.2MG - 0.16CR (7249-T76511), SOLUTION HEAT TREATED, STRESS-RELIEVED, STRAIGHTENED, AND OVERAGED |
| ASTM B 90/B90M : 2015 : REDLINE | Standard Specification for Magnesium-Alloy Sheet and Plate |
| SAE AMS 4183 : 2016 | ALUMINUM ALLOY, EXTRUDED PROFILES (2027-T3511) 4.4CU - 1.2MG - 0.8MN - 0.10ZR, SOLUTION HEAT TREATED AND STRESS RELIEVED BY STRETCHING |
| SAE AMS 4209 : 2016 | ALUMINUM ALLOY SHEET, ALCLAD, 6.0CU - 0.40ZR - (2004-F), AS ROLLED |
| SAE AMS 4070 : 2015 | ALUMINUM ALLOY, DRAWN, ROUND SEAMLESS TUBING, 2.5MG - 0.25CR (5052-O), ANNEALED |
| SAE AMS 4252 : 2012 | ALUMINUM ALLOY, PLATE - 6.4ZN - 2.4MG - 2.2CU - 0.12ZR (7150-T7751), SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
| SAE AMS 4160 : 2013 | ALUMINUM ALLOY, EXTRUSIONS 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-0), ANNEALED |
| SAE AMS 4251 : 2017 | ALUMINUM ALLOY SHEET, 2.7CU - 2.2LI - 0.12ZR (2090-T83), SOLUTION HEAT TREATED, COLD WORKED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4277 : 2018 | ALUMINUM ALLOY, SHEET - 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-O) ANNEALED, FINE GRAINED |
| SAE AMS 4127 : 2012 | ALUMINUM ALLOY, FORGINGS AND ROLLED OR FORGED RINGS, (6061-T6) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4045 : 2016 | ALUMINUM ALLOY SHEET AND PLATE 5.6ZN - 2.5MG - 1.6CU - 0.23CR 7075: (-T6 SHEET, -T651 PLATE) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4479 : 2015 | ALUMINUM ALLOY, EXTRUDED PROFILES (2824-T3511) 4.0CU - 1.35MG - 0.7MN SOLUTION HEAT TREATED AND STRESS RELIEVED BY STRETCHING |
| SAE AMS 4084 : 2017 | ALUMINUM ALLOY SHEET, 5.7ZN - 2.2MG - 1.6CU - 0.22CR (7475-T61), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4408 : 2018 | ALUMINUM ALLOY, PLATE (7140-T7651), 6.6ZN - 1.8CU - 2.0MG - 0.10ZR, SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
| SAE AMS 4463 : 2017 | ALUMINUM ALLOY, PLATE (7255-T7751) 8.0ZN - 2.3CU - 2.0MG - 0.12ZR, SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
| SAE AMS 4101 : 2018 | ALUMINUM ALLOY, PLATE, 4.4CU - 1.5MG - 0.60MN (2124-T851), SOLUTION HEAT TREATED, STRETCHED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4341 : 2011 | ALUMINUM ALLOY, EXTRUSIONS, 6.2ZN - 2.3CU - 2.2MG - 0.12ZR (7050-T73511), SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, STRAIGHTENED, AND OVERAGED |
| SAE AMS 4017 : 2018 | ALUMINUM ALLOY SHEET AND PLATE, 2.5MG - 0.25CR, (5052-H34), STRAIN-HARDENED, HALF-HARD, AND STABILIZED |
| SAE AMS 4304 : 2015 | ALUMINUM ALLOY, DISCONTINUOUSLY REINFORCED SHEET, 2009/SIC/15W (T8P), SOLUTION HEAT TREATED, STRETCHED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4371 : 2015 | MAGNESIUM ALLOY, PLATE, 4.0Y - 2.25ND - 0.5ZR (WE43C - T5), PRECIPITATION HEAT TREATED |
| SAE AMS 3025 : 2018 | POLYALKYLENE GLYCOL HEAT TREAT QUENCHANT |
| SAE AMS 4118 : 2014 | ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS, RODS, AND WIRE, 4.0CU - 0.70MN - 0.60MG - 0.50SI (2017; -T4, -T451), SOLUTION HEAT TREATED |
| ASTM B 241/B241M : 2016 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube |
| SAE AMS 4120 : 2018 | ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS, RODS, AND WIRE, 4.4CU - 1.5MG - 0.60MN (2024), SOLUTION HEAT TREATED AND NATURALLY AGED (T4), SOLUTION HEAT TREATED, COLD WORKED, AND NATURALLY AGED (T351) |
| SAE AMS 4179 : 2016 | ALUMINUM ALLOY FORGINGS, 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7175-T7452), SOLUTION HEAT TREATED, STRESS RELIEVED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4165 : 2013 | ALUMINUM ALLOY, EXTRUSIONS, 4.4CU - 1.5MG - 0.60MN (2024-T3511), SOLUTION HEAT TREATED, STRESS-RELIEVED BY STRETCHING, AND STRAIGHTENED |
| SAE AMS 4122 : 2012 | ALUMINUM ALLOY BARS, RODS, AND WIRE ROLLED OR COLD FINISHED, AND RINGS, 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T6, 7075-T651), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4255 : 2012 | ALUMINUM ALLOY, CLAD ONE SIDE SHEET - 0.6MG - 0.35SI - 0.28CU (NO. 21 BRAZING SHEET) AS FABRICATED |
| SAE AMS 4205 : 2015 | ALUMINUM ALLOY, PLATE 6.2ZN - 1.8CU - 2.4MG - 0.13ZR (7010-T7451) SOLUTION HEAT TREATED, STRESS RELIEVED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4337 : 2017 | ALUMINUM ALLOY, EXTRUDED PROFILES (7055-T77511), 8.0ZN - 2.3CU - 2.0MG - 0.16ZR, SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
| ASTM B 483/B483M : 2013 : EDT 1 | Standard Specification for Aluminum and Aluminum-Alloy Drawn Tube and Drawn Pipe for General Purpose Applications |
| ASTM B 744/B744M : 2015 : REDLINE | Standard Specification for Aluminum Alloy Sheet for Corrugated Aluminum Pipe |
| SAE AMS 4150 : 2013 | ALUMINUM ALLOY, EXTRUSIONS AND RINGS 1.0MG - 0.60SI - 0.28CU - 0.20CR - (6061-T6) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4315 : 2017 | ALUMINUM ALLOY SHEET AND PLATE, 5.6ZN - 2.5MG - 1.6CU - 0.23CR, 7075: (-T76 SHEET, -T7651 PLATE), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4090 : 2015 | ALUMINUM ALLOY, PLATE 5.7ZN - 2.2MG - 1.6CU - 0.22CR (7475-T651) SOLUTION HEAT TREATED, STRESS RELIEVED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4250 : 2018 | ALUMINUM ALLOY, PLATE - 8.1ZN - 2.3MG - 1.0CU - ZR (7449-T7651) SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
| SAE AMS 4599 : 2017 | ALUMINUM ALLOY, SHEET AND PLATE, 6.3CU - 0.30MN - 0.06TI - 0.10V - 0.18ZR, SOLUTION AND PRECIPITATION HEAT TREATED (2219 -T81/-T851) |
| SAE AMS 4232 : 2012 | ALUMINUM ALLOY EXTRUSIONS, 2.7CU - 2.2LI - 0.12ZR (2090-T86), SOLUTION HEAT TREATED, COLD WORKED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4163 : 2017 | ALUMINUM ALLOY, EXTRUSIONS 6.3CU - 0.30MN - 0.18ZR - 0.10V - 0.06TI (2219-T3511) SOLUTION HEAT TREATED, STRESS-RELIEVED BY STRETCHING, AND STRAIGHTENED |
| MIL-DTL-46027 Revision K:2007 | ARMOR PLATE, ALUMINUM ALLOY, WELDABLE 5083, 5456, & 5059 |
| SAE AMS 4342 : 2018 | ALUMINUM ALLOY, EXTRUSIONS, 6.2ZN - 2.3CU - 2.2MG - 0.12ZR (7050-T74511), SOLUTION HEAT TREATED, STRESS RELIEVED, STRAIGHTENED, AND OVERAGED |
| SAE AMS 4211 : 2012 | ALUMINUM ALLOY, PLATE, 6.2ZN - 1.9CU - 2.1MG - 0.10ZR (7040-T7451) SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
| SAE AMS 4351 : 2014 | ALUMINUM ALLOY, PLATE (7065-T7651) 7.7ZN - 2.1CU - 1.65MG - 0.10ZR SOLUTION HEAT TREATED, STRESS-RELIEVED, AND OVERAGED |
| SAE AMS 4460 : 2015 | ALUMINUM ALLOY, CLAD TWO SIDES SHEET, 0.6MG - 0.35SI - 0.28CU (NO. 24 BRAZING SHEET), AS FABRICATED |
| SAE AMS 4474 : 2015 | ALUMINUM ALLOY, SHEET AND PLATE, 4.0CU - 1.0LI - 0.40MG - 0.35AG - 0.13ZR (2195-T8), SOLUTION HEAT TREATED, COLD WORKED, AND ARTIFICIALLY AGED |
| SAE AMS 4089 : 2014 | ALUMINUM ALLOY, PLATE 1.6CU - 2.2MG - 0.22CR - 5.7ZN (7475-T7651) SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, AND PRECIPITATION HEAT TREATED |
| MIL-DTL-46118 Revision E:1998 | ALUMINUM ALLOY ARMOR, 2219, ROLLED PLATE AND DIE FORGED SHAPES |
| MIL-DTL-25995 Revision E:2014 | PIPE, ALUMINUM ALLOY, DRAWN OR EXTRUDED |
| SAE AMS 4206 : 2017 | ALUMINUM ALLOY, PLATE (7055-T7751), 8.0ZN - 2.3CU - 2.0MG - 0.16ZR, SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
| SAE AMS 4477 : 2017 | ALUMINUM ALLOY, COILED SHEET, 4.4CU - 1.5MG - 0.60MN (2024-T4), SOLUTION TREATED |
| MIL A 46063 : G | ARMOUR PLATE, ALUMINUM ALLOY, 7039 |
| SAE AMS 4071 : 2017 | ALUMINUM ALLOY, DRAWN, ROUND, SEAMLESS HYDRAULIC TUBING, 2.5MG - 0.25CR (5052-O), ANNEALED |
| SAE AMS 4299 : 2018 | ALUMINUM ALLOY, PLATE (7449-T7951), 8.1ZN - 1.8CU - 2.3MG SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
| SAE AMS 4331 : 2014 | ALUMINUM ALLOY EXTRUSIONS 7.8ZN - 2.6MG - 2.0CU - 0.10ZR - (7068-T6511) SOLUTION HEAT TREATED, STRESS RELIEVED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4461 : 2012 | ALUMINUM ALLOY, SHEET AND PLATE, ALCLAD, 4.4CU - 1.5MG - 0.60MN (ALCLAD 2024-O, SHEET AND PLATE) ANNEALED; OR WHEN SPECIFIED, 'AS FABRICATED' (2024-F) |
| SAE AMS 4303 : 2017 | ALUMINUM ALLOY PLATE, 2.7CU - 2.2LI - 0.12ZR (2090-T81), SOLUTION HEAT TREATED, COLD WORKED, AND AGED |
| SAE AMS 4404 : 2014 | ALUMINUM ALLOY, EXTRUDED PROFILES (6056-T4511), 1.0SI - 0.90MG - 0.80CU - 0.60MN - 0.40ZN, SOLUTION HEAT TREATED AND STRESS-RELIEVED BY STRETCHING |
| SAE AMS 4016 : 2013 | ALUMINUM ALLOY, SHEET AND PLATE, 2.5MG - 0.25CR (5052-H32), STRAIN HARDENED, QUARTER-HARD, AND STABILIZED |
| SAE AMS 4063 : 2013 | ALUMINUM ALLOY, CLAD ONE SIDE SHEET, 1.25MN - 0.12CU (NO. 11-0 BRAZING SHEET), ANNEALED |
| SAE AMS QQ A 250 B : 2012 | ALUMINUM AND ALUMINUM ALLOY, PLATE AND SHEET GENERAL SPECIFICATION FOR |
| SAE AMS 4025 : 2014 | ALUMINUM ALLOY, SHEET AND PLATE, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-O) ANNEALED |
| SAE AMS 4333 : 2015 | ALUMINUM ALLOY, DIE FORGINGS 6.2ZN - 2.3CU - 2.2MG - 0.12ZR (7050-T7452) SOLUTION HEAT TREATED, COMPRESSION STRESS-RELIEVED, AND OVERAGED |
| SAE AMS 4152 : 2007 | ALUMINUM ALLOY EXTRUSIONS 4.4CU - 1.5MG - 0.60MN (2024-T3) SOLUTION HEAT TREATED |
| SAE AMS 4409 : 2013 | ALUMINUM ALLOY, PLATE, 4.0ZN - 2.0MG - 0.32MN (7019-T651), SOLUTION HEAT TREATED, STRESS RELIEVED AND ARTIFICIALLY AGED |
| SAE J 457 : 2017 | CHEMICAL COMPOSITIONS, MECHANICAL PROPERTY LIMITS, AND DIMENSIONAL TOLERANCES OF SAE WROUGHT ALUMINUM ALLOYS |
| SAE AMS4221E : 2016 | ALUMINUM ALLOY, PLATE, 4.4CU - 1.5MG - 0.60MN (2124-T8151) SOLUTION HEAT TREATED, STRESS RELIEVED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4149 : 2016 | ALUMINUM ALLOY, DIE AND HAND FORGINGS, 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7175-T74), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4375 : 2017 | SHEET AND PLATE, MAGNESIUM ALLOY - 3.0AL - 1.0ZN - 0.20MN (AZ31B-0) ANNEALED AND RECRYSTALLIZED |
| SAE AMS QQ A 225 : 2018 | ALUMINUM AND ALUMINUM ALLOY, BAR, ROD, WIRE OR SPECIAL SHAPES; ROLLED, DRAWN OR COLD FINISHED; GENERAL SPECIFICATION FOR |
| API 620 CHINESE : 2013 | DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS |
| SAE AMS 4041 : 2012-07 | ALUMINUM ALLOY, SHEET AND PLATE, ALCLAD 4.4CU - 1.5MG - 0.60MN (2024, -T3 SHEET/-T351 PLATE WITH 1-1/2% ALCLAD) SOLUTION HEAT TREATED, COLD WORKED AND NATURALLY AGED |
| SAE AMS 4475 : 2017 | Aluminum Alloy, Coiled Sheet, Alclad 4.4Cu – 1.5Mg – 0.60Mn (Alclad 2024; -T4 Coiled Sheet) Solution Heat Treated |
| SAE AMS 4467 : 2017 | ALUMINUM ALLOY, SHEET AND PLATE, ALCLAD 4.4CU 1.5MG 0.60MN (ALCLAD 2024, -T861 SHEET & PLATE) SOLUTION HEAT TREATED, 6% COLD WORKED AND ARTIFICIALLY AGED |
| SAE AMS 4366 : 2014 | ALUMINUM ALLOY, EXTRUDED PROFILES (2065-T84) 4.2CU - 1.2LI - 0.52MG - 0.32MN - 0.32AG - 0.1ZR SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING AND ARTIFICIALLY AGED |
| API 620 REDLINE : 2008 | DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS |
| SAE AMS 4161 : 2013 | ALUMINUM ALLOY, EXTRUSIONS 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-T4) SOLUTION HEAT TREATED AND NATURALLY AGED |
| SAE AMS 4243 : 2014 | ALUMINUM ALLOY, ALCLAD SHEET 6.2ZN - 2.3CU - 2.2MG - 0.12ZR (ALCLAD 7050-T76) SOLUTION HEAT TREATED AND OVERAGED |
| SAE AMS 4402 : 2018 | ALUMINUM ALLOY, EXTRUDED PROFILES (2024-T432), 4.4CU - 1.5MG - 0.6MN, ANNEALED, STRETCH FORMED, SOLUTION HEAT TREATED AND STRESS RELIEVED BY STRETCHING |
| SAE AMS 4359 : 2016 | ALUMINUM ALLOY, EXTRUDED PROFILES (2395-T84), 3.95CU - 1.15LI - 0.3AG - 0.5MG - 0.1ZR, SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, AND AGED |
| ASTM C 1729M : 2017 : REDLINE | Standard Specification for Aluminum Jacketing for Insulation |
| SAE AMS 4037 : 2014 | ALUMINUM ALLOY, SHEET AND PLATE, 4.4CU - 1.5MG - 0.60MN (2024; -T3 FLAT SHEET, -T351 PLATE) SOLUTION HEAT TREATED |
| SAE AMS 4066 : 2013 | ALUMINUM ALLOY, DRAWN, ROUND SEAMLESS TUBING 6.3CU - 0.30MN - 0.18ZR - 0.10V - 0.06TI - (2219-T8511) SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING AND PRECIPITATION HEAT TREATED |
| SAE AMS 4116 : 2015 | ALUMINUM ALLOY, BARS, RODS, AND WIRE, 1.0MG - 0.60SI - 0.30CU - 0.20CR (6061-T4), COLD FINISHED, SOLUTION HEAT TREATED AND NATURALLY AGED |
| SAE AMS 4126 : 2010 | ALUMINUM ALLOY, DIE AND HAND FORGINGS AND ROLLED RINGS - 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7079-T6) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4040 : 2018 | ALUMINUM ALLOY, SHEET AND PLATE, ALCLAD 4.4CU - 1.5MG - 0.60MN (2024-O WITH 1-1/2% ALCLAD); ANNEALED |
| SAE AMS 4095 : 2018 | ALUMINUM ALLOY, ALCLAD SHEET AND PLATE 6.3CU - 0.30MN - 0.18ZR - 0.10V - 0.06TI ALCLAD 2219-T31; SHEET, SOLUTION HEAT TREATED AND COLD WORKED ALCLAD 2219-T351; PLATE, SOLUTION HEAT TREATED AND STRESS RELIEVED |
| MIL-DTL-32375 Revision B:2017 | Armor Plate, Aluminum Alloy, 7085, 7056, 7075, 7181, and 7099, Unweldable Applique |
| AASHTO M 181 : 2010 : R2015 | SPECIFICATION FOR CHAIN-LINK FENCE |
| SAE AMS 4338 : 2007 | ALUMINUM ALLOY, EXTRUSIONS, 4.0CU - 1.3MG - 0.60MN (2026-T3511), SOLUTION HEAT TREATED AND STRESS RELIEVED BY STRETCHING |
| MIL-DTL-32262 Revision A:2015 | ARMOR PLATE, ALUMINUM ALLOY 6055 WELDABLE & ALLOY 6061, UNWELDABLE APPLIQUE |
| SAE AMS 4336 : 2013 | ALUMINUM ALLOY, EXTRUDED ROD, BAR, AND PROFILES (7055-T76511) - 8.0ZN - 2.3CU - 2.0MG - 0.16ZR - SOLUTION HEAT TREATED, STRESS-RELIEVED, AND OVERAGED |
| SAE AMS 4088 : 2015 | ALUMINUM ALLOY, DRAWN, SEAMLESS TUBING 4.4CU - 1.5MG - 0.60MN (2024-T3) SOLUTION HEAT TREATED AND COLD WORKED |
| SAE AMS 4414 : 2013 | ALUMINUM ALLOY, HAND FORGINGS, 7.5ZN - 1.6CU - 1.5MG - 0.12ZR (7085-T7452), SOLUTION HEAT TREATED, COMPRESSION STRESS-RELIEVED, AND OVERAGED |
| SAE AMS 4080 : 2016 | ALUMINUM ALLOY, DRAWN SEAMLESS TUBING, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-0), ANNEALED |
| SAE AMS 4372 : 2018 | ALUMINUM ALLOY, PLATE, 3.5CU - 1.0LI - 0.40MG - 0.35MN - 0.45AG - 0.12ZR (2050-T34), SOLUTION HEAT TREATED AND STRESS RELIEVED |
| SAE AMS 4352J : 2017 | MAGNESIUM ALLOY, EXTRUSIONS, 5.5ZN - 0.45ZR (ZK60A - T5), PRECIPITATION HEAT TREATED |
| SAE AMS 4124 : 2012 | ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS, RODS, AND WIRE - 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T7351), SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, AND OVERAGED |
| SAE AMS 4132 : 2013 | ALUMINUM ALLOY, DIE AND HAND FORGINGS, ROLLED RINGS, AND FORGING STOCK, 2.3CU - 1.6MG - 1.1FE - 1.0NI - 0.18SI - 0.07TI (2618-T61), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4100 : 2016 | ALUMINUM ALLOY, ALCLAD, SHEET, 5.7ZN - 2.2MG - 1.6CU - 0.22CR (ALCLAD 7475-T761), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4029 : 2012 | ALUMINUM ALLOY SHEET AND PLATE (2014; -T6 SHEET, -T651 PLATE) SOLUTION AND PRECIPITATION HEAT TREATED (COMPOSITION SIMILAR TO UNS A92014) |
| SAE AMS 4195 : 2016 | ALUMINUM ALLOY SHEET AND PLATE, ALCLAD, 4.4CU - 1.5MG - 0.60MN (ALCLAD 2024 AND 1-1/2% ALCLAD 2024-T861 FLAT SHEET; 1-1/2% ALCLAD 2024-T861 PLATE), SOLUTION HEAT TREATED, COLD WORKED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4207 : 2012 | ALUMINUM ALLOY SHEET, ALCLAD, 5.7ZN - 2.2MG - 1.6CU - 0.22CR (7475-T61) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4457 : 2014 | ALUMINUM ALLOY, SHEET 3.5CU - 1.1LI - 0.50MG - 0.40AG - 0.12ZR (2098-T8) SOLUTION HEAT TREATED, COLD WORKED, AND ARTIFICIALLY AGED |
| SAE AMS 4082 : 2014 | ALUMINUM ALLOY, SEAMLESS DRAWN TUBING, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-T6) SOLUTION AND PRECIPITATION HEAT TREATED |
| MIL-DTL-32341 Revision A:2015 | ARMOR PLATE, ALUMINUM, ALLOY 2139 WELDABLE & ALLOY 2195 AND 2060 UNWELDABLE APPLIQUE |
| SAE AMS 4079 : 2017 | ALUMINUM ALLOY, DRAWN, ROUND, SEAMLESS, TUBING, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-O), CLOSE TOLERANCE, ANNEALED |
| SAE AMS 4307 : 2017 | ALUMINUM ALLOY, EXTRUSIONS, 6.4ZN - 2.4MG - 2.2CU - 0.12ZR (7150-T61511), SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, STRAIGHTENED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4480 : 2015 | ALUMINUM ALLOY, SEAMLESS DRAWN TUBING 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-T4) SOLUTION HEAT TREATED AND NATURALLY AGED |
| CSA A440 : 2017 | NORTH AMERICAN FENESTRATION STANDARD/SPECIFICATION FOR WINDOWS, DOORS, AND SKYLIGHTS |
| MIL-B-20148 Revision D:1987 | BRAZING SHEET, ALUMINUM ALLOY |
| SAE AMS 4270 : 2016 | ALUMINUM ALLOY, ALCLAD FLAT SHEET 4.1CU - 1.4MG - 0.45MN (ALCLAD 2424-T3) SOLUTION HEAT TREATED AND COLD WORKED |
| SAE AMS 4085 : 2011 | ALUMINUM ALLOY SHEET, 5.7ZN - 2.2MG - 1.6CU - 0.22CR (7475-T761), SOLUTION HEAT TREATED AND OVERAGED |
| SAE AMS 4077 : 2015 | ALUMINUM ALLOY SHEET AND PLATE, ALCLAD ONE SIDE, 4.4CU - 1.5MG - 0.60MN (CLAD ONE SIDE 2024-O), ANNEALED |
| SAE AMS 4407 : 2018 | ALUMINUM ALLOY, PLATE (7056-T7651), 9.1ZN - 1.6CU - 1.9MG, SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
| SAE AMS 4324 : 2016 | ALUMINUM ALLOY, EXTRUDED ROD, BAR AND PROFILES (7055-T74511), 8.0ZN - 2.3CU - 2.0MG - 0.16ZR, SOLUTION HEAT TREATED, STRESS-RELIEVED, AND OVERAGED |
| SAE AMS 4478 : 2018 | ALUMINUM ALLOY, SHEET AND PLATE, ALCLAD, 4.4CU - 1.5MG - 0.60MN (ALCLAD 2024, -T81 SHEET, -T851 PLATE), SOLUTION HEAT TREATED, COLD WORKED AND ARTIFICIALLY AGED |
| ASTM B 234 : 2017 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Surface Condensers, Evaporators, and Heat Exchangers |
| SAE AMS 4153 : 2015 | ALUMINUM ALLOY, EXTRUSIONS 4.5CU - 0.85SI - 0.80MN - 0.50MG (2014-T6) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4326 : 2018 | ALUMINUM ALLOY, 2013, EXTRUDED BAR, ROD, AND PROFILES, 1.0MG - 0.80SI - 1.8CU - 0.20CR (2013- T6511), SOLUTION HEAT TREATED, STRESS-RELIEVED BY STRETCHING, AND AGED |
| SAE AMS 4305 : 2012 | ALUMINUM ALLOY, EXTRUDED PROFILES (7449-T79511) 8.1ZN - 1.8CU - 2.2MG - 0.16ZR SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED (COMPOSITION SIMILAR TO UNS A97449) |
| SAE AMS 4279 : 2011 | ALUMINUM ALLOY, ALCLAD SHEET, 4.4CU - 1.5MG - 0.60MN (2024 -T4 FLAT SHEET), SOLUTION HEAT TREATED, HIGH FORMABILITY |
| SAE AMS 4087 : 2015 | ALUMINUM ALLOY TUBING, SEAMLESS, DRAWN, (2024-0), REINSTATE COMPOSITION ANNEALED |
| SAE AMS 4356 : 2016 | ALUMINUM ALLOY SEAMLESS DRAWN ROUND TUBING, 2.3 CU - 8.0 ZN - 2.0 MG - 0.16 ZR (7155-T76), SOLUTION HEAT TREATED AND AGED |
| SAE AMS 4107 : 2018 | ALUMINUM ALLOY DIE FORGINGS (7050-T74) SOLUTION HEAT TREATED AND OVERAGED |
| SAE AMS 4123 : 2011 | ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS AND RODS (7075-T651) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4201 : 2014 | ALUMINUM ALLOY PLATE 6.2ZN - 2.3CU - 2.2MG - 0.12ZR (7050-T7651) SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
| SAE AMS 4601 : 2017 | Aluminum Alloy, Sheet and Plate 6.3Cu - 0.30Mn - 0.06Ti - 0.10V - 0.18Zr Solution Heat Treated, Cold Worked and Naturally Aged (2219 -T31/-T351) |
| SAE AMS 4340 : 2011 | ALUMINUM ALLOY, EXTRUSIONS, 6.2ZN - 2.3CU - 2.2MG - 0.12ZR (7050-T76511), SOLUTION HEAT TREATED, STRESS RELIEVED, STRAIGHTENED, AND OVERAGED |
| ASTM C 1423 : 2016 : REDLINE | Standard Guide for Selecting Jacketing Materials for Thermal Insulation |
| SAE AMS 4044 : 2017 | ALUMINUM ALLOY, SHEET AND PLATE, 5.6ZN - 2.5MG - 1.6CU - 0.23CR, ANNEALED (7075-O), OR WHEN SPECIFIED, 'AS FABRICATED' (7075-F) |
| SAE AMS 4096 : 2016 | ALUMINUM ALLOY SHEET AND PLATE, ALCLAD, 6.3CU - 0.30MN - 0.18ZR - 0.10V - 0.06TI (ALCLAD 2219-O), ANNEALED |
| SAE AMS 4354 : 2016 | ALUMINUM ALLOY, PLATE, 7.9ZN - 1.8CU - 2.0MG - 0.10ZR (7099-T7451) SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
| ASTM C 1729 : 2017 : REDLINE | Standard Specification for Aluminum Jacketing for Insulation |
| SAE AMS 4056 : 2016 | ALUMINUM ALLOY, SHEET AND PLATE, 4.4MG - 0.70MN - 0.15CR (5083-O), ANNEALED |
| SAE AMS4276C:2024 | Aluminum Alloy, Sheet 4.4Cu - 1.5Mg - 0.60Mn (2024-O) Annealed, Fine Grained |
| SAE AMS4367A:2022 | Aluminum Alloy, Extruded Profiles, 8.9Zn - 2.2Cu - 2.2Mg - 0.15Zr (7136-T74511), Solution Heat Treated, Stress Relieved by Stretching, Straightened, and Overaged |
| SAE AMS4365A:2022 | Aluminum Alloy, Plate 7.9Zn - 1.2Cu - 2.1Mg - 0.10Zr (7097-T7651) Solution Heat Treated, Stress Relieved, and Overaged |
| SAE AMS4121K:2023 | Aluminum Alloy Bars, Rods, and Wire, Rolled, Drawn, or Cold Finished 4.5Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T6, -T651) Solution and Precipitation Heat Treated |
| SAE AMS4374A:2022 | Aluminum Alloy, Extruded Profiles 8.9Zn - 2.2Cu - 2.2Mg - 0.15Zr (7136-T73511) Solution Heat Treated, Stress Relieved by Stretching, Straightened, and Overaged |
| SAE AMS 4063F:2019 | Aluminum Alloy, Clad One Side, Sheet, 1.25Mn - 0.12Cu (No. 11-0 Brazing Sheet), Annealed |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.