ANSI FC 1 : 2012
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
STATIONARY FUEL CELL POWER SYSTEMS
Hardcopy , PDF
28-07-2021
English
01-01-2012
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Part I - Construction
Part II - Performance
Part III - Routine Tests
EXHIBIT A - List of Reference Standards
Part IV - Terms and Definitions
APPENDIX A - Significant hazards, hazardous situations
and events dealt with in this standard
APPENDIX B - Carburization and material compatibility
for hydrogen service
APPENDIX C - Alternate U.S. Standard References
APPENDIX D - Common Component U.S. Standards List
APPENDIX E - Guidelines for Determining Compliance of
Polymeric Enclosures, Cabinets and Other
Parts
APPENDIX F - Table of Conversion Factors
Pertains to stationary packaged, self-contained fuel cell power systems or fuel cell power systems comprised of factory matched packages of integrated systems which generate electricity through electrochemical reactions.
| DevelopmentNote |
Redesignated as CSA FC 1. (03/2014)
|
| DocumentType |
Standard
|
| Pages |
142
|
| PublisherName |
Canadian Standards Association
|
| Status |
Withdrawn
|
| SupersededBy |
| NFPA 54 : 2018 | NATIONAL FUEL GAS CODE |
| ANSI Z223.1 : 2018 | NATIONAL FUEL GAS CODE |
| SAE J 2578 : 2014 | RECOMMENDED PRACTICE FOR GENERAL FUEL CELL VEHICLE SAFETY |
| ICC IRC CODE AND COMMENTARY VOLUME 2 : 2015 | IRC® Code and Commentary, Volume 2 |
| ICC IFGC CODE AND COMMENTARY : 2015 | IFGC® Code and Commentary |
| IEC 61025:2006 | Fault tree analysis (FTA) |
| ISO/TR 15916:2015 | Basic considerations for the safety of hydrogen systems |
| CSA 4.9 : 2014 | GAS-FIRED LOW PRESSURE STEAM AND HOT WATER BOILERS |
| CSA/ANSI Z21.13 : 2014 | GAS-FIRED LOW PRESSURE STEAM AND HOT WATER BOILERS |
| NFPA 853 : 2010 | INSTALLATION OF STATIONARY FUEL CELL POWER SYSTEMS |
| IEC 60812:2006 | Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA) |
| CSA 6.5 : 2015 | AUTOMATIC VALVES FOR GAS APPLIANCES |
| ANSI S1.4 : 1983 | SPECIFICATION FOR SOUND LEVEL METERS |
| ISO 4413:2010 | Hydraulic fluid power General rules and safety requirements for systems and their components |
| IEC GUIDE 117:2010 | Electrotechnical equipment - Temperatures of touchable hot surfaces |
| NFPA 79 : 2015 | ELECTRICAL STANDARD FOR INDUSTRIAL MACHINERY |
| UL 60335-1:6ED 2016-10-31 | Standard for Safety of Household and Similar Appliances, Part 1: General Requirements |
| UL 795:8ED 2016-12-02 | Commercial-Industrial Gas Heating Equipment |
| IEC 60079-10-1:2015 | Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres |
| ICC 2012 INTERNATIONAL PLUMBING CODE : 2012 | INTERNATIONAL PLUMBING CODE (INCLUDES IPSDC) |
| NFPA 496 : 2017 | PURGED AND PRESSURIZED ENCLOSURES FOR ELECTRICAL EQUIPMENT |
| CFR 47(PTS0-19) : OCT 2017 | TELECOMMUNICATION - FEDERAL COMMUNICATIONS COMMISSION |
| IEEE/ASTM SI_10-2010 | American National Standard for Metric Practice |
| UL 60730-2-9:4ED 2017-02-14 | Automatic Electrical Controls - Part 2-9: Particular Requirements for Temperature Sensing Controls |
| UL 2075:2ED 2013-03-05 | Gas and Vapor Detectors and Sensors |
| CSA 6.10 : 2015 | CONNECTORS FOR GAS APPLIANCES |
| NFPA 274 : 2013 | TEST METHOD TO EVALUATE FIRE PERFORMANCE CHARACTERISTICS OF PIPE INSULATION |
| SAE J1739_200901 | POTENTIAL FAILURE MODE AND EFFECTS ANALYSIS IN DESIGN (DESIGN FMEA), POTENTIAL FAILURE MODE AND EFFECTS ANALYSIS IN MANUFACTURING AND ASSEMBLY PROCESSES (PROCESS FMEA) |
| ISA 12.13.01 : 2003 | PERFORMANCE REQUIREMENTS FOR COMBUSTIBLE GAS DETECTORS |
| NSS 1740.16 : 0 | SAFETY STANDARD FOR HYDROGEN AND HYDROGEN SYSTEMS |
| ASCE 7 10 : 2010 | MINIMUM DESIGN LOADS FOR BUILDINGS AND OTHER STRUCTURES |
| NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
| UL 372:6ED 2007-07-31 | Automatic Electrical Controls for Household and Similar Use - Part 2: Particular Requirements for Burner Ignition Systems and Components |
| IEC 60730-2-5:2013+AMD1:2017 CSV | Automatic electrical controls - Part 2-5: Particular requirements for automatic electrical burner control systems |
| UL 429:7ED 2013-11-06 | Electrically Operated Valves |
| SAE J30_201202 | FUEL AND OIL HOSES |
| ISO 4414:2010 | Pneumatic fluid power General rules and safety requirements for systems and their components |
| CGA 12.3 : 1995 | FUEL SYSTEM COMPONENTS FOR NATURAL GAS POWERED VEHICLES |
| NFPA 54 : 2018 | NATIONAL FUEL GAS CODE |
| UL 778:6ED 2016-07-07 | Motor-Operated Water Pumps |
| IEC 61032:1997 | Protection of persons and equipment by enclosures - Probes for verification |
| ANSI Z223.1 : 2018 | NATIONAL FUEL GAS CODE |
| ISA 60079-0 : 2005 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
| ANSI Z21.24 : 2015 | CONNECTORS FOR GAS APPLIANCES |
| UL 515:2ED 2015-07-17 | Standard for Electrical Resistance Trace Heating for Commercial Applications |
| UL 60079-0:6ED 2013-07 | Explosive Atmospheres - Part 0: Equipment - General Requirements |
| AIAA G 095 : 2004 | GUIDE TO SAFETY OF HYDROGEN AND HYDROGEN SYSTEMS |
| NFPA 497 : 2017 | CLASSIFICATION OF FLAMMABLE LIQUIDS, GASES, OR VAPORS AND OF HAZARDOUS (CLASSIFIED) LOCATIONS FOR ELECTRICAL INSTALLATIONS IN CHEMICAL PROCESS AREAS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.