ANSI/CSA FC 1:2014
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
Available format(s)
Hardcopy , PDF
Withdrawn date
30-03-2014
Language(s)
English
Published date
01-01-2014
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Safety requirements and protective measures
5 Type tests
6 Routine tests
7 Marking, labelling and packaging
Annex A (informative) - Significant hazards, hazardous
situations and events dealt with in this standard
Annex B (informative) - Carburization and material
compatibility for hydrogen service
Annex C (informative) - Alternate U.S. standard references
Annex D (informative) - Additional U.S. standard references
Annex E (informative) - Guidelines for determining
compliance of polymeric enclosures, cabinets
and other parts
Annex F (informative) - Table of conversion factors
Bibliography
Pertains to stationary packaged, self-contained fuel cell power systems or fuel cell power systems comprised of factory matched packages of integrated systems which generate electricity through electrochemical reactions.
| DevelopmentNote |
Supersedes & Redesignates ANSI Z21.83. (05/2004) Supersedes & Redesignates ANSI FC 1. (02/2014)
|
| DocumentType |
Revision
|
| Pages |
132
|
| PublisherName |
Canadian Standards Association
|
| Status |
Withdrawn
|
| Supersedes |
| NFPA 54 : 2018 | NATIONAL FUEL GAS CODE |
| ANSI Z223.1 : 2018 | NATIONAL FUEL GAS CODE |
| NFPA 2:2023 | Hydrogen Technologies Code |
| NFPA 2 : 2016 | HYDROGEN TECHNOLOGIES CODE |
| ICC IRC CODE AND COMMENTARY VOLUME 2 : 2015 | IRC® Code and Commentary, Volume 2 |
| ICC IFGC CODE AND COMMENTARY : 2015 | IFGC® Code and Commentary |
| ICC IMC Code and Commentary : 2015 | IMC® Code and Commentary |
| ICC 2012 INTERNATIONAL FUEL GAS CODE : 2012 | INTERNATIONAL FUEL GAS CODE |
| ICC 2012 INTERNATIONAL RESI. CODE : 2012 | INTERNATIONAL RESIDENTIAL CODE FOR ONE- AND TWO-FAMILY DWELLINGS |
| SAE J 2579 : 2013 | STANDARD FOR FUEL SYSTEMS IN FUEL CELL AND OTHER HYDROGEN VEHICLES |
| ICC 2012 INTERNATIONAL MECH. CODE : 2012 | INTERNATIONAL MECHANICAL CODE |
| IEC 61025:2006 | Fault tree analysis (FTA) |
| ISO/TR 15916:2015 | Basic considerations for the safety of hydrogen systems |
| IEC 60950-1:2005+AMD1:2009+AMD2:2013 CSV | Information technology equipment - Safety - Part 1: General requirements |
| ISO 13707:2000 | Petroleum and natural gas industries Reciprocating compressors |
| BS 7886:1997 | Method of measurement of hydrogen permeation and the determination of hydrogen uptake and transport in metals by an electrochemical technique |
| ISO 12499:1999 | Industrial fans Mechanical safety of fans Guarding |
| ANSI S1.23 : 1976 | DESIGNATION OF SOUND POWER EMITTED BY MACHINERY AND EQUIPMENT, METHOD FOR THE |
| ISO 15649:2001 | Petroleum and natural gas industries — Piping |
| IAPMO UNIFORM PLUMBING CODE : 2012 | 2012 UNIFORM PLUMBING CODE |
| IEC 60730-2-9:2015 RLV | Automatic electrical controls - Part 2-9: Particular requirements for temperature sensing controls |
| CSA 4.9 : 2014 | GAS-FIRED LOW PRESSURE STEAM AND HOT WATER BOILERS |
| CSA/ANSI Z21.13 : 2014 | GAS-FIRED LOW PRESSURE STEAM AND HOT WATER BOILERS |
| ISO 10442:2002 | Petroleum, chemical and gas service industries Packaged, integrally geared centrifugal air compressors |
| ASME B31.1 : 2016 | POWER PIPING |
| NFPA 853 : 2010 | INSTALLATION OF STATIONARY FUEL CELL POWER SYSTEMS |
| CFR 29(PTS1900-1910) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
| IEC 61511-1:2016+AMD1:2017 CSV | Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and application programming requirements |
| IEC 61000-6-2:2016 | Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments |
| IEC 60812:2006 | Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA) |
| ASTM G 146 : 2001 | Standard Practice for Evaluation of Disbonding of Bimetallic Stainless Alloy/Steel Plate for Use in High-Pressure, High-Temperature Refinery Hydrogen Service |
| ISO 3864-2:2016 | Graphical symbols — Safety colours and safety signs — Part 2: Design principles for product safety labels |
| ISO 13631:2002 | Petroleum and natural gas industries Packaged reciprocating gas compressors |
| ANSI S1.4 : 1983 | SPECIFICATION FOR SOUND LEVEL METERS |
| ISO 9587:2007 | Metallic and other inorganic coatings Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement |
| IEC TS 62282-1:2013 | Fuel cell technologies - Part 1: Terminology |
| NACE TM 02 84 : 2016 | EVALUATION OF PIPELINE AND PRESSURE VESSEL STEELS FOR RESISTANCE TO HYDROGEN-INDUCED CRACKING |
| ISO 4413:2010 | Hydraulic fluid power General rules and safety requirements for systems and their components |
| NFPA 79 : 2015 | ELECTRICAL STANDARD FOR INDUSTRIAL MACHINERY |
| UL 60335-1:6ED 2016-10-31 | Standard for Safety of Household and Similar Appliances, Part 1: General Requirements |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| UL 795:8ED 2016-12-02 | Commercial-Industrial Gas Heating Equipment |
| NACE TM 01 77 : 2016 | LABORATORY TESTING OF METALS FOR RESISTANCE TO SULFIDE STRESS CRACKING AND STRESS CORROSION CRACKING IN H[2]S ENVIRONMENTS |
| ASME B31.3:2016 | PROCESS PIPING |
| IEC 60730-2-6:2015 | Automatic electrical controls - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements |
| ICC 2012 INTERNATIONAL PLUMBING CODE : 2012 | INTERNATIONAL PLUMBING CODE (INCLUDES IPSDC) |
| IEC 60079-20-1:2010 | Explosive atmospheres - Part 20-1: Material characteristics for gas and vapour classification - Test methods and data |
| NFPA 496 : 2017 | PURGED AND PRESSURIZED ENCLOSURES FOR ELECTRICAL EQUIPMENT |
| ISO 10440-2:2001 | Petroleum and natural gas industries Rotary-type positive-displacement compressors Part 2: Packaged air compressors (oil-free) |
| ISO 15330:1999 | Fasteners — Preloading test for the detection of hydrogen embrittlement — Parallel bearing surface method |
| ISO 15724:2001 | Metallic and other inorganic coatings — Electrochemical measurement of diffusible hydrogen in steels — Barnacle electrode method |
| CFR 47(PTS0-19) : OCT 2017 | TELECOMMUNICATION - FEDERAL COMMUNICATIONS COMMISSION |
| IEC 62040-1:2017 EXV | UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 1: SAFETY REQUIREMENTS |
| IEC 60335-2-51:2002+AMD1:2008+AMD2:2011 CSV | Household and similar electrical appliances - Safety - Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations |
| ICC 2006 INTERNATIONAL PLUMBING CODE : 2006 | INTERNATIONAL PLUMBING CODE |
| DIN 8572-1:1981-03 | DETERMINATION OF HYDROGEN IN DEPOSITED WELD METAL; MANUAL ARC WELDING WITH COVERED ELECTRODE |
| ASME B31.12 : 2014 | HYDROGEN PIPING AND PIPELINES |
| UL 60730-2-9:4ED 2017-02-14 | Automatic Electrical Controls - Part 2-9: Particular Requirements for Temperature Sensing Controls |
| ISO 23553-1:2014 | Safety and control devices for oil burners and oil-burning appliances Particular requirements Part 1: Automatic and semi-automatic valves |
| AWS A4.3 : 1993 | DETERMINATION OF THE DIFFUSIBLE HYDROGEN CONTENT OF MARTENSITIC, BAINITIC, AND FERRITIC STEEL WELD METAL PRODUCED BY ARC WELDING |
| UL 2075:2ED 2013-03-05 | Gas and Vapor Detectors and Sensors |
| ISO 5388:1981 | Stationary air compressors Safety rules and code of practice |
| ASTM B 849 : 2002 | Standard Specification for Pre-Treatments of Iron or Steel for Reducing Risk of Hydrogen Embrittlement |
| IEC 62282-3-200:2015 | Fuel cell technologies - Part 3-200: Stationary fuel cell power systems - Performance test methods |
| IEC 61000-6-3:2006+AMD1:2010 CSV | Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments |
| CSA 6.10 : 2015 | CONNECTORS FOR GAS APPLIANCES |
| NFPA 274 : 2013 | TEST METHOD TO EVALUATE FIRE PERFORMANCE CHARACTERISTICS OF PIPE INSULATION |
| ISO 14847:1999 | Rotary positive displacement pumps Technical requirements |
| ISO 16111:2008 | Transportable gas storage devices Hydrogen absorbed in reversible metal hydride |
| ICC 2009 INTERNATIONAL PLUMBING CODE : 2009 | INTERNATIONAL PLUMBING CODE |
| SAE J 1739 : 2009 | POTENTIAL FAILURE MODE AND EFFECTS ANALYSIS IN DESIGN (DESIGN FMEA), POTENTIAL FAILURE MODE AND EFFECTS ANALYSIS IN MANUFACTURING AND ASSEMBLY PROCESSES (PROCESS FMEA) |
| ISA 12.13.01 : 2003 | PERFORMANCE REQUIREMENTS FOR COMBUSTIBLE GAS DETECTORS |
| ISO 7539-6:2011 | Corrosion of metals and alloys Stress corrosion testing Part 6: Preparation and use of precracked specimens for tests under constant load or constant displacement |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| ASCE 7 10 : 2010 | MINIMUM DESIGN LOADS FOR BUILDINGS AND OTHER STRUCTURES |
| API 941 : 2016 | STEELS FOR HYDROGEN SERVICE AT ELEVATED TEMPERATURES AND PRESSURES IN PETROLEUM REFINERIES AND PETROCHEMICAL PLANTS |
| ISO 23551-1:2012 | Safety and control devices for gas burners and gas-burning appliances Particular requirements Part 1: Automatic and semi-automatic valves |
| ANSI S1.10 : 66(R2001) | AMERICAN NATIONAL STANDARD METHOD FOR THE CALIBRATION OF MICROPHONES |
| NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
| ISO 9588:2007 | Metallic and other inorganic coatings Post-coating treatments of iron or steel to reduce the risk of hydrogen embrittlement |
| UL 372:6ED 2007-07-31 | Automatic Electrical Controls for Household and Similar Use - Part 2: Particular Requirements for Burner Ignition Systems and Components |
| SAE AMS 2759/9 : 2009 | HYDROGEN EMBRITTLEMENT RELIEF (BAKING) OF STEEL PARTS |
| IEC TS 61000-3-4:1998 | Electromagnetic compatibility (EMC) - Part 3-4: Limits - Limitation of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater than 16 A |
| ICC 2000 INTERNATIONAL PLUMBING CODE : 2000 | INTERNATIONAL PLUMBING CODE |
| IEC 60079-0:2011 | Explosive atmospheres - Part 0: Equipment - General requirements |
| DIN 8572-2:1981-03 | DETERMINATION OF DIFFUSIBLE HYDROGEN IN WELD METAL; SUBMERGED ARC WELDING |
| API 934-A : 2008 | MATERIALS AND FABRICATION OF 2 [1/4]CR-1MO, 2 [1/4]CR-1MO-[1/4]V, 3CR-1MO, AND 3CR-1MO-[1/4]V STEEL HEAVY WALL PRESSURE VESSELS FOR HIGH-TEMPERATURE, HIGH-PRESSURE HYDROGEN SERVICE |
| IEC 61000-3-3:2013 RLV | Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection |
| IEC 61000-6-1:2016 | Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments |
| ICC 2003 INTERNATIONAL PLUMBING CODE : 2003 | INTERNATIONAL PLUMBING CODE |
| IEC 60730-2-5:2013+AMD1:2017 CSV | Automatic electrical controls - Part 2-5: Particular requirements for automatic electrical burner control systems |
| ISO 11114-4:2017 | Transportable gas cylinders Compatibility of cylinder and valve materials with gas contents Part 4: Test methods for selecting steels resistant to hydrogen embrittlement |
| ISO 26142:2010 | Hydrogen detection apparatus Stationary applications |
| IEC 61000-6-4:2006+AMD1:2010 CSV | Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments |
| ASTM F 2078 : 2015 : REDLINE | Standard Terminology Relating to Hydrogen Embrittlement Testing |
| UL 746A:6ED 2012-09-06 | Polymeric Materials - Short Term Property Evaluations |
| ISO 13709:2009 | Centrifugal pumps for petroleum, petrochemical and natural gas industries |
| UL 429:7ED 2013-11-06 | Electrically Operated Valves |
| SAE J 30 : 2012 | FUEL AND OIL HOSES |
| ISO 3690:2012 | Welding and allied processes Determination of hydrogen content in arc weld metal |
| ISO 10440-1:2007 | Petroleum, petrochemical and natural gas industries — Rotary-type positive-displacement compressors — Part 1: Process compressors |
| ISO 4414:2010 | Pneumatic fluid power General rules and safety requirements for systems and their components |
| UL 60730-1:5ED 2016-08-03 | Automatic Electrical Controls - Part 1: General Requirements |
| ISO 13850:2015 | Safety of machinery Emergency stop function Principles for design |
| IEC 60079-30-1:2007 | Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements |
| ISO 2626:1973 | Copper — Hydrogen embrittlement test |
| NFPA 54 : 2018 | NATIONAL FUEL GAS CODE |
| ASTM F 1624 : 2012-11 | TEST METHOD FOR MEASUREMENT OF HYDROGEN EMBRITTLEMENT THRESHOLD IN STEEL BY THE INCREMENTAL STEP LOADING TECHNIQUE |
| ISO 7000:2014 | Graphical symbols for use on equipment Registered symbols |
| IEC 62061:2005+AMD1:2012+AMD2:2015 CSV | Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems |
| ASME PV CODE SET : 2017 | BOILER AND PRESSURE VESSEL CODE - COMPLETE SET |
| ASTM F 326 : 1996 | Standard Test Method for Electronic Measurement for Hydrogen Embrittlement from Cadmium-Electroplating Processes |
| ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
| ANSI Z21.24 : 2015 | CONNECTORS FOR GAS APPLIANCES |
| UL 515:2ED 2015-07-17 | Standard for Electrical Resistance Trace Heating for Commercial Applications |
| UL 60079-0:6ED 2013-07 | Explosive Atmospheres - Part 0: Equipment - General Requirements |
| SAE USCAR 5 : 2012 | AVOIDANCE OF HYDROGEN EMBRITTLEMENT OF STEEL |
| ISO 23550:2011 | Safety and control devices for gas burners and gas-burning appliances General requirements |
| SAE AMS 2451/4D : 2017 | PLATING, BRUSH, CADMIUM CORROSION PROTECTIVE, LOW HYDROGEN EMBRITTLEMENT |
| NFPA 497 : 2017 | CLASSIFICATION OF FLAMMABLE LIQUIDS, GASES, OR VAPORS AND OF HAZARDOUS (CLASSIFIED) LOCATIONS FOR ELECTRICAL INSTALLATIONS IN CHEMICAL PROCESS AREAS |
| IEC 60730-1:2013+AMD1:2015 CSV | Automatic electrical controls - Part 1: General requirements |
| ISO 10439:2002 | Petroleum, chemical and gas service industries Centrifugal compressors |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.