ANSI/AWWA C522:2022
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Rotary Cone Valves, 6 In. Through 60 In. (150 mm Through 1,500 mm)
Hardcopy , PDF
09-08-2024
English
01-05-2023
Important note : All end users must be registered with an Account prior to user licenses being assigned.This standard covers gray-iron, ductile-iron, and cast or weld fabricated-steel or stainless steel flanged-end, low-leakage trunnion-mounted, full-port, two(2)- and four(4)-seated rotary cone valves for pressures up to 300 psi (2,100 kPa) in sizes from 6-in. through 60-in.
| DocumentType |
Standard
|
| ISBN |
9781647171209
|
| Pages |
56
|
| PublisherName |
American Water Works Association
|
| Status |
Superseded
|
| SupersededBy |
| AWWA C541 : 2016 | HYDRAULIC AND PNEUMATIC CYLINDER AND VANE-TYPE ACTUATORS FOR VALVES AND SLIDE GATES |
| ASTM B 584 : 2014 | Standard Specification for Copper Alloy Sand Castings for General Applications |
| AWWA C550 : 2017 | PROTECTIVE INTERIOR COATINGS FOR VALVES AND HYDRANTS |
| ASME B16.1 : 2020 | Gray Iron Pipe Flanges and Flanged Fittings Classes 25, 125, and 250 |
| ASTM E 1032 : 2012 | Standard Test Method for Radiographic Examination of Weldments |
| ASTM B 127 : 2019 | Standard Specification for Nickel-Copper Alloy Plate, Sheet, and Strip |
| ASTM A 322 : 2013 | Standard Specification for Steel Bars, Alloy, Standard Grades |
| ASTM A 564/A564M : 2004 | Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes |
| ASTM E 165 : 2009 | Standard Practice for Liquid Penetrant Examination for General Industry |
| ANSI/AWWA C228 : 2019 | AWWA C228-19 Stainless-Steel Pipe Flange Joints for Water Service—Sizes 2 In. Through 72 In. (50 mm Through 1,800 mm) |
| ASTM E 709 : 2021 | Standard Guide for Magnetic Particle Testing |
| ASME PCC-1:2022 | Pressure Boundary Bolted Flange Joint Assembly |
| ASTM A 351/A351M : 2013 | Standard Specification for Castings, Austenitic, for Pressure-Containing Parts |
| ASTM B 148 : 2018 | Standard Specification for Aluminum-Bronze Sand Castings |
| AWWA C207:2018 | Steel Pipe Flanges for Waterworks Service, Sizes 4 In. Through 144 In. (100 mm Through 3,600 mm) |
| AWWA M11 : 2004 | STEEL PIPE: A GUIDE FOR DESIGN AND INSTALLATION |
| ASTM A 27/A27M : 2020 | Standard Specification for Steel Castings, Carbon, for General Application |
| AWWA C542 : 2016 | ELECTRIC MOTOR ACTUATORS FOR VALVES AND SLIDE GATES |
| ASTM A 743/A743M : 2019 | Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application |
| ASTM A 516/A516M : 2017 | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service |
| ASTM A 126 : 2004 | Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings |
| ASME B16.47 : 2020 | Large Diameter Steel Flanges NPS 26 Through NPS 60 Metric/Inch Standard |
| ASME B46.1 : 2019 | Surface Texture (Surface Roughness, Waviness, and Lay) |
| ASME B16.5:2020 | Pipe Flanges and Flanged Fittings: NPS 1/2 through NPS 24, Metric/Inch Standard |
| AWWA M49 : 2017 | BUTTERFLY VALVES: TORQUE, HEAD LOSS, AND CAVITATION ANALYSIS |
| ASTM E 164 : 2019 | Standard Practice for Contact Ultrasonic Testing of Weldments |
| ASTM B 271 : 2011 | Standard Specification for Copper-Base Alloy Centrifugal Castings |
| ASTM A 307 : 2021 | Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength |
| ASTM A 395/A395M : 1998 | Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.