ANSI/ASSE Z244.1 : 2016
Current
The latest, up-to-date edition.
THE CONTROL OF HAZARDOUS ENERGY LOCKOUT, TAGOUT AND ALTERNATIVE METHODS
Hardcopy , PDF
English
01-01-2016
Important note : All end users must be registered with an Account prior to user licenses being assigned.Introduction<br>1. Scope and Purpose<br>2. References<br>3. Definitions<br>4. Responsibilities<br>5. Design of Machinery/Equipment for the Control <br> of Hazardous Energy<br>6. Hazardous Energy Control Program<br>7. Control of Hazardous Energy<br>8. Alternative Methods of Hazardous Energy Control<br>Annexes<br>Annex A - The Risk Assessment Process<br>Annex B - Remote Lockout System<br>Annex C - Sample Lockout or Tagout Program and Policy<br>Annex D - Sample of a Lockout or Tagout Application <br> Inspection Form<br>Annex E - Sample Management of Change Form<br>Annex F - General Lockout or Tagout Procedure<br>Annex G - Sample of a Hazardous Energy Control Procedure<br>Annex H - Samples of a Lockout or Tagout Placard<br>Annex I - Lockout Tagout Permit<br>Annex J - Group Lockout Guidance<br>Annex K - Group Lockout or Tagout<br>Annex L-1 - Sample Alternative Methods <br> Practicability/Justification Evaluation<br>Annex L-2 - Sample Alternative Method (Lockout) - Risk<br> Assessment<br>Annex M - Alternative Risk Reduction Measures in the <br> Packaging Machinery Industry<br>Annex N - Alternative Risk Reduction Measures in the <br> Pharmaceutical Industry<br>Annex O - Alternative Risk Reduction Measures for the <br> Plastics Industry<br>Annex P - Alternative Risk Reduction Measures for the <br> Printing Industry<br>Annex Q - Alternative Risk Reduction Measure for Robotic <br> Applications<br>Annex R - Alternative Risk Reduction Measures in the Steel <br> Making Industry<br>Annex S - Application of this Standard to the Semiconductor <br> Industry<br>Annex T - Alternative Risk Reduction Measures involving Trapped <br> Key Interlock Systems<br>Annex U - Description of Risk Reduction Measures<br>Annex V - Control System Example Methodologies<br>Annex W - Alternative Risk Reduction Measures for Freeze <br> Plug Applications<br>Bibliography
Specifies requirements for the control of hazardous energy associated with machines, equipment, or processes that could cause injury to personnel.
| Committee |
Z244
|
| DocumentType |
Standard
|
| Pages |
128
|
| PublisherName |
American Society of Safety Engineers
|
| Status |
Current
|
| SupersededBy | |
| Supersedes |
| IEEE 902-1998 | IEEE Guide for Maintenance, Operation, and Safety of Industrial and Commercial Power Systems (Yellow Book) |
| BS ISO 12643-3:2010 | Graphic technology. Safety requirements for graphic technology equipment and systems Binding and finishing equipment and systems |
| ANSI B11.21 : 2006 | SAFETY REQUIREMENTS FOR MACHINE TOOLS USING A LASERS FOR PROCESSING MATERIALS |
| ANSI B11.3 : 2012 | SAFETY REQUIREMENTS FOR POWER PRESS BRAKES |
| ANSI B11.12 : 2005 : R2010 | SAFETY REQUIREMENTS FOR ROLL-FORMING AND ROLL-BENDING MACHINES |
| IEEE 3007.3-2012 | IEEE Recommended Practice for Electrical Safety in Industrial and Commercial Power Systems |
| ANSI B11.20 : 2004 : R2009 | SAFETY REQUIREMENTS FOR INTEGRATED MANUFACTURING SYSTEMS |
| CSA Z460 : 2013 | CONTROL OF HAZARDOUS ENERGY - LOCKOUT AND OTHER METHODS |
| ANSI B11 TR1 : 2004 | ERGONOMIC GUIDELINES FOR THE DESIGN, INSTALLATION AND USE OF MACHINE TOOLS |
| ANSI B11.18 : 2006 | SAFETY REQUIREMENTS FOR MACHINES PROCESSING OR SLITTING COILED OR NON-COILED METAL |
| UFC 3-440-01 : V20020614 | UNIFIED FACILITIES CRITERIA - FACILITY-SCALE RENEWABLEENERGY SYSTEMS |
| ANSI O2.1 : 1983 | SAWMILLS - SAFETY REQUIREMENTS FOR |
| API 2217A REDLINE : 2009 | GUIDELINES FOR SAFE WORK IN INERT CONFINED SPACES IN THE PETROLEUM AND PETROCHEMICAL INDUSTRIES |
| ASTM F 2039 : 2000 | Standard Guide for the Basic Elements of a Shipboard Occupational Health and Safety Program |
| ANSI B11.20 : 2004 | SAFETY REQUIREMENTS FOR INTEGRATED MANUFACTURING SYSTEMS |
| 09/30201364 DC : 0 | BS ISO 12643-3 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 3: BINDING AND FINISHING EQUIPMENT AND SYSTEMS |
| RIA ISO 10218-1 : 2007 | ROBOTS FOR INDUSTRIAL ENVIRONMENT - SAFETY REQUIREMENTS - PART 1: ROBOT |
| 04/30110212 DC : DRAFT MAR 2004 | ISO 12648 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR PRINTING PRESS SYSTEMS |
| ANSI/ASSP A10.9-2013(R2018) | SAFETY REQUIREMENTS FOR CONCRETE AND MASONRY WORK - AMERICAN NATIONAL STANDARD FOR CONSTRUCTION AND DEMOLITION OPERATIONS |
| ANSI/ASSE Z117.1 : 2009 | SAFETY REQUIREMENTS FOR ENTERING CONFINED SPACES |
| ANSI B11.0 : 2015 | SAFETY OF MACHINERY - GENERAL REQUIREMENTS AND RISK ASSESSMENT |
| ANSI B11.2 : 2013 | SAFETY REQUIREMENTS FOR HYDRAULIC AND PNEUMATIC POWER PRESSES |
| ISO 12649:2004 | Graphic technology Safety requirements for binding and finishing systems and equipment |
| ANSI B11.17 : 2004 : R2015 | SAFETY REQUIREMENTS FOR HORIZONTAL HYDRAULIC EXTRUSION PRESSES |
| ANSI B11.17 : 2004 : R2009 | SAFETY REQUIREMENTS FOR HORIZONTAL HYDRAULIC EXTRUSION PRESSES |
| ANSI B11.23 : 2002 : R2012 | SAFETY REQUIREMENTS FOR MACHINING CENTERS AND AUTOMATIC, NUMERICALLY CONTROLLED MILLING, DRILLING AND BORING MACHINES |
| ANSI B11.1 : 2009 | SAFETY REQUIREMENTS FOR MECHANICAL POWER PRESSES |
| ANSI B11.10 : 2003 : R2009 | SAFETY REQUIREMENTS FOR METAL SAWING MACHINES |
| ANSI B11.24 : 2002 : R2012 | SAFETY REQUIREMENTS FOR TRANSFER MACHINES |
| ANSI B11.24 : 2002 : R2007 | SAFETY REQUIREMENTS FOR TRANSFER MACHINES |
| ANSI B11.23 : 2002 : R2007 | SAFETY REQUIREMENTS FOR MACHINING CENTERS AND AUTOMATIC, NUMERICALLY CONTROLLED MILLING, DRILLING AND BORING MACHINES |
| ANSI B11.10 : 2003 : R2015 | SAFETY REQUIREMENTS FOR METAL SAWING MACHINES |
| ANSI B11.22 : 2002 : R2012 | SAFETY REQUIREMENTS FOR TURNING CENTERS AND AUTOMATIC, NUMERICALLY CONTROLLED TURNING MACHINES |
| ANSI B11.18 : 2006 : R2012 | SAFETY REQUIREMENTS FOR MACHINES PROCESSING OR SLITTING COILED OR NON-COILED METAL |
| ANSI B11.22 : 2002 : R2007 | SAFETY REQUIREMENTS FOR TURNING CENTERS AND AUTOMATIC, NUMERICALLY CONTROLLED TURNING MACHINES |
| ASME B30.17 : 2015 | Cranes and Monorails (With Underhung Trolley or Bridge) |
| ASME B30.2 : 2016 | OVERHEAD AND GANTRY CRANES (TOP RUNNING BRIDGE, SINGLE OR MULTIPLE GIRDER, TOP RUNNING TROLLEY HOIST) - SAFETY STANDARD FOR CABLEWAYS, CRANES, DERRICKS, HOISTS, HOOKS, JACKS, AND SLINGS |
| API RP 2207 : 2017 | PREPARING TANK BOTTOMS FOR HOT WORK |
| ANSI/SPI B151.31:2014 | PLASTICS MACHINERY - SAFETY REQUIREMENTS FOR THE MANUFACTURE AND USE OF BLOW MOLDING MACHINES |
| API 2221 : 2011 | CONTRACTOR AND OWNER SAFETY PROGRAM IMPLEMENTATION |
| 06/30157246 DC : 0 | BS ISO 12643-3 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 3: BINDING AND FINISHING EQUIPMENT |
| API 2009 : 2002 : R2007 | SAFE WELDING, CUTTING, AND HOT WORK PRACTICES IN THE PETROLEUM AND PETROCHEMICAL INDUSTRIES |
| ANSI Z245.1 : 2017 | MOBILE WASTES AND RECYCLABLE MATERIALS COLLECTION, TRANSPORTATION, AND COMPACTION EQUIPMENT |
| BS ISO 12648:2006 | Graphic technology. Safety requirements for printing press systems |
| RIA R15.05 2 : 1992(R1999) | INDUSTRIAL ROBOTS AND ROBOT SYSTEMS - PATH-RELATED AND DYNAMIC PERFORMANCE CHARACTERISTICS - EVALUATION |
| ASTM F 2039 : 2000 : R2006 | Standard Guide for Basic Elements of Shipboard Occupational Health and Safety Program |
| AWS C5.7 : 2000 | RECOMMENDED PRACTICES FOR ELECTROGAS WELDING |
| NFPA 350 : 2016 | SAFE CONFINED SPACE ENTRY AND WORK |
| ANSI/ASSE Z590.3 : 2011 | PREVENTION THROUGH DESIGN GUIDELINES FOR ADDRESSING OCCUPATIONAL HAZARDS AND RISKS IN DESIGN AND REDESIGN PROCESSES |
| ANSI Z117.1 REDLINE : 2009 | COMPARISON DOCUMENT OF ANSI/ASSE Z117.1 AMERICAN NATIONAL STANDARD - SAFETY REQUIREMENTS FOR CONFINED SPACES (FOR VERSIONS 1995, 2003 AND 2009) |
| ISO 12643-1:2009 | Graphic technology — Safety requirements for graphic technology equipment and systems — Part 1: General requirements |
| NASA STD 8719.24 : 2011 | NASA EXPENDABLE LAUNCH VEHICLE PAYLOAD SAFETY REQUIREMENTS |
| ANSI B11.25 : 2015 | SAFETY REQUIREMENTS FOR LARGE MACHINES |
| ANSI B11.7 : 1995 | COLD HEADERS AND COLD FORMERS - SAFETY REQUIREMENTS FOR CONSTRUCTION, CARE, AND USE |
| ANSI B11.9:2010 | SAFETY REQUIREMENTS FOR GRINDING MACHINES |
| 08/30190505 DC : 0 | BS ISO 12643-1 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| RIA TR R15.106 : 2006 | TECHNICAL REPORT FOR INDUSTRIAL ROBOTS AND ROBOT SYSTEMS-SAFETY REQUIREMENTS TEACHING MULTIPLE ROBOTS |
| ANSI B11.9 : 2010(R2015) | SAFETY REQUIREMENTS FOR GRINDING MACHINES |
| BS ISO 12643-1:2009 | Graphic technology. Safety requirements for graphic technology equipment and systems General requirements |
| ANSI B11.13 : 1992 | MACHINE TOOLS - SINGLE AND MULTIPLE SPINDLE, AUTOMATIC SCREW/BAR AND CHUCKING MACHINES - SAFETY REQUIREMENTS FOR CONSTRUCTION, CARE AND USE |
| 14/30279065 DC : 0 | BS EN ISO 12643-3 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 3: BINDING AND FINISHING EQUIPMENT AND SYSTEMS |
| API 2009 : 2002 | SAFE WELDING, CUTTING, AND HOT WORK PRACTICES IN THE PETROLEUM AND PETROCHEMICAL INDUSTRIES |
| ANSI B11.12 : 2005 : R2015 | SAFETY REQUIREMENTS FOR ROLL-FORMING AND ROLL-BENDING MACHINES |
| API 2220 : 2011 | CONTRACTOR SAFETY PERFORMANCE PROCESS |
| ISO 12648:2006 | Graphic technology Safety requirements for printing press systems |
| ANSI/ASSP A10.9:2013 | SAFETY REQUIREMENTS FOR CONCRETE AND MASONRY WORK - AMERICAN NATIONAL STANDARD FOR CONSTRUCTION AND DEMOLITION OPERATIONS |
| ANSI A10.24 : 2014 | ROOFING - SAFETY REQUIREMENTS FOR LOW-SLOPED ROOFS |
| ANSI/ASSE Z117.1 : 2009 | SAFETY REQUIREMENTS FOR ENTERING CONFINED SPACES |
| ASTM E 2706 : 2018 | Standard Practice for Equipment Technology and Operations for Mobile and Plant-Based Secure Destruction Safety Requirements |
| ISO 12643-3:2010 | Graphic technology — Safety requirements for graphic technology equipment and systems — Part 3: Binding and finishing equipment and systems |
| IEEE 242-2001 | IEEE Recommended Practice for Protection and Coordination of Industrial and Commercial Power Systems (IEEE Buff Book) |
| ANSI B93.114M : 1987 | PNEUMATIC FLUID POWER - SYSTEMS STANDARD FOR INDUSTRIAL MACHINERY |
| API 2217A : 2009 | SAFE WORK IN INERT CONFINED SPACES IN THE PETROLEUM AND PETROCHEMICAL INDUSTRIES |
| API 2220 CHINESE : 2011 | CONTRACTOR SAFETY PERFORMANCE PROCESS |
| ANSI Z117.1 REDLINE : 2009 | COMPARISON DOCUMENT OF ANSI/ASSE Z117.1 AMERICAN NATIONAL STANDARD - SAFETY REQUIREMENTS FOR CONFINED SPACES (FOR VERSIONS 1995, 2003 AND 2009) |
| BS ISO 12649:2004 | Graphic technology. Safety requirements for binding and finishing systems and equipment |
| ANSI B11.20 : 2004 : R2015 | SAFETY REQUIREMENTS FOR INTEGRATED MANUFACTURING SYSTEMS |
| ANSI B11.21 : 2006 : R2012 | SAFETY REQUIREMENTS FOR MACHINE TOOLS USING A LASERS FOR PROCESSING MATERIALS |
| ASTM F 2039 : 2000 : R2012 | Standard Guide for Basic Elements of Shipboard Occupational Health and Safety Program |
| ANSI A10.44 : 2014 | CONTROL OF ENERGY SOURCES (LOCKOUT/TAGOUT) FOR CONSTRUCTION AND DEMOLITION OPERATIONS |
| API 2001 : 2012 | FIRE PROTECTION IN REFINERIES |
| ANSI B11.4 : 2003 | SAFETY REQUIREMENTS FOR SHEARS |
| ASME B30.7 : 2016 | Base-Mounted Drum Hoists (B30.7 - 2006) |
| IEEE 45-5 : 2014 | ELECTRICAL INSTALLATIONS ON SHIPBOARD - SAFETY CONSIDERATIONS |
| ASME B30.11 : 2010 | MONORAILS AND UNDERHUNG CRANES - SAFETY STANDARD FOR CABLEWAYS, CRANES, DERRICKS, HOISTS, HOOKS, JACKS, AND SLINGS |
| ASME B30.28 : 2015 | BALANCE LIFTING UNITS - SAFETY STANDARD FOR CABLEWAYS, CRANES, DERRICKS, HOISTS, HOOKS, JACKS, AND SLINGS |
| ASME B30.18 : 2016 | STACKER CRANES (TOP OR UNDER RUNNING BRIDGE, MULTIPLE GIRDER WITH TOP OR UNDER RUNNING TROLLEY HOIST) - SAFETY STANDARD FOR CABLEWAYS, CRANES, DERRICKS, HOISTS, HOOKS, JACKS, AND SLINGS |
| ASME B30.19 : 2016 | CABLEWAYS - SAFETY STANDARD FOR CABLEWAYS, CRANES, DERRICKS, HOISTS, HOOKS, JACKS, AND SLINGS |
| ASME B30.27 : 2014 | MATERIAL PLACEMENT SYSTEMS - SAFETY STANDARD FOR CABLEWAYS, CRANES, DERRICKS, HOISTS, HOOKS, JACKS, AND SLINGS |
| ISO 14119:2013 | Safety of machinery — Interlocking devices associated with guards — Principles for design and selection |
| CFR 29(PTS1900-1910) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
| ANSI B65.1 : 2011 | GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| ANSI Z21.22 : 2015 | RELIEF VALVES FOR HOT WATER SUPPLY SYSTEMS |
| NFPA 79 : 2015 | ELECTRICAL STANDARD FOR INDUSTRIAL MACHINERY |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| SPI B151.1 : 2007 | PLASTICS MACHINERY - SAFETY REQUIREMENTS FOR INJECTION MOLDING MACHINES |
| ISO 14118:2000 | Safety of machinery Prevention of unexpected start-up |
| ANSI B11 TR3 : 2000 | RISK ASSESSMENT AND RISK REDUCTION - A GUIDE TO ESTIMATE, EVALUATE AND REDUCE RISKS ASSOCIATED WITH MACHINE TOOLS |
| ANSI B65.2 : 2011 | GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 2: PREPRESS AND PRESS EQUIPMENT AND SYSTEMS |
| ANSI B11.19 : 2010 | PERFORMANCE CRITERIA FOR SAFEGUARDING |
| ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
| ISO/TR 14121-2:2012 | Safety of machinery — Risk assessment — Part 2: Practical guidance and examples of methods |
| ANSI/SPI B151.31:2014 | PLASTICS MACHINERY - SAFETY REQUIREMENTS FOR THE MANUFACTURE AND USE OF BLOW MOLDING MACHINES |
| RIA R15.06 : 1999 | INDUSTRIAL ROBOTS AND ROBOT SYSTEMS - SAFETY REQUIREMENTS |
| MIL-STD-882 Revision E:2012 | System Safety |
| ANSI Z241.1 : 1989 | SAND PREPARATION, MOLDING, AND COREMAKING IN THE SAND FOUNDRY INDUSTRY SAFETY REQUIREMENTS FOR, |
| NFPA 70E : 2018 | ELECTRICAL SAFETY IN THE WORKPLACE |
| ANSI B11.0 : 2015 | SAFETY OF MACHINERY - GENERAL REQUIREMENTS AND RISK ASSESSMENT |
| ANSI B65.3 : 2011 | GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 3: BINDING AND FINISHING EQUIPMENT AND SYSTEMS |
| ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.