AECTP-500 : 2016
Current
Current
The latest, up-to-date edition.
ELECTROMAGNETIC ENVIRONMENTAL EFFECTS TESTS AND VERIFICATION
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
09-12-2016
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
CHAPTER 1 - INTRODUCTION TO ELECTROMAGNETIC
ENVIRONMENTAL TESTS AND VERIFICATION
CHAPTER 2 - REFERENCES
CHAPTER 3 - ACRONYMS
ANNEX A - RISK ASSESSMENT OF COTS/MOTS PROCUREMENT
ANNEX B - E3 PROGRAM REQUIREMENTS AND TESTING
ANNEX C - GLOSSARY OF E3 TERMINOLOGY
Includes Electromagnetic Environmental Effects (E3) test requirements and procedures necessary to ensure military Platforms, Systems, Subsystems, and Equipment have been designed for Electromagnetic Compatibility (EMC) and evaluated to verify, by test, analysis, or modeling and simulation as appropriate, that the desired performance requirements will be met when subjected to the Electromagnetic Environment (EME).
| DevelopmentNote |
Supersedes STANAG 4435, STANAG 4436 & STANAG 4437. (04/2008)
|
| DocumentType |
Standard
|
| Pages |
1125
|
| PublisherName |
NATO
|
| Status |
Current
|
| Supersedes |
| DEFSTAN 00-972(PT1)/5(2015) : 2015 | MILITARY AIR TRAFFIC SERVICES EQUIPMENT SAFETY AND PERFORMANCE STANDARDS (AERODROME, TERMINAL AND NAVAL AIR TRAFFIC SERVICES) - PART 1: GENERIC AND SOFTWARE |
| DEFSTAN 59-114(PT3)/1(2012) : 2012 | SAFETY PRINCIPLES FOR ELECTRICAL CIRCUITS IN SYSTEMS INCORPORATING EXPLOSIVE COMPONENTS - PART 3: ASSESSMENT, SAFETY MARGINS & TRIALS |
| AAP-48 : 2013 | NATO SYSTEM LIFE CYCLE STAGES AND PROCESSES |
| STANREC 4567 : 2014 | NATO IMPLEMENTATION OF UNIFIED PROTECTION AGAINST ELECTROMAGNETIC ENVIRONMENTAL EFFECTS (UE3) |
| DEFSTAN 59-411(PT1)/2(2014) : 2014 | ELECTROMAGNETIC COMPATIBILITY - PART 1: MANAGEMENT AND PLANNING |
| CLC/TR 50538:2010 | Guide to EMC Directive conformity of equipment designed for military purposes |
| DEFSTAN 00-970(PT0)/9(2012) : 2012 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 59-114(PT2)/1(2012) : 2012 | SAFETY PRINCIPLES FOR ELECTRICAL CIRCUITS IN SYSTEMS INCORPORATING EXPLOSIVE COMPONENTS - PART 2: ELECTRO-EXPLOSIVE DEVICES AND THEIR CHARACTERIZATION |
| DEFSTAN 61-23 SUPP001/1(2011) : 2011 | GENERIC FUEL CELL - SUPPLEMENT 1: METHANOL FUEL CELL SYSTEM |
| DEFSTAN 00-970(PT0)/17(2016) : 2016 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT9)/5(2009) : 2009 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 9: UAV SYSTEMS |
| DEFSTAN 59-114(PT1)/1(2012) : 2012 | SAFETY PRINCIPLES FOR ELECTRICAL CIRCUITS IN SYSTEMS INCORPORATING EXPLOSIVE COMPONENTS - PART 1: PRINCIPLES, DESIGN RECOMMENDATIONS AND ELECTRICAL/ELECTROMAGNETIC ENVIRONMENTS |
| DEFSTAN 00-970(PT0)/14(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/7(2011) : 2011 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 59-188(PT1)/2(2014) : 2014 | HIGH ALTITUDE ELECTROMAGNETIC PULSE (HEMP) PROTECTION FOR GROUND BASED COMMUNICATION FACILITIES PERFORMING CRITICAL, TIME-URGENT MISSIONS - PART 1: FIXED FACILITIES |
| DEFSTAN 00-035(PT2)/5(2017) : 2017 | ENVIRONMENTAL HANDBOOK FOR DEFENCE MATERIEL - PART 2: ENVIRONMENTAL TRIALS PROGRAMME DERIVATION AND ASSESSMENT METHODOLOGIES |
| DEFSTAN 00-970(PT0)/12(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/11(2013) : 2013 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/15(2015) : 2015 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/13(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 59-411(PT1)/1(2007) : 2007 | ELECTROMAGNETIC COMPATIBILITY - PART 1: MANAGEMENT AND PLANNING |
| DEFSTAN 00-970(PT0)/8(2011) : 2011 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/16(2015) : 2015 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/10(2013) : 2013 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| AAS3P-1 : 2011 | ALLIED AMMUNITION SAFETY AND SUITABILITY FOR SERVICE ASSESSMENT TESTING PUBLICATION - GUIDANCE |
| AECTP-600 : 2007 | THE TEN STEP METHOD FOR EVALUATING THE ABILITY OF MATERIEL TO MEET EXTENDED LIFE REQUIREMENTS AND ROLE AND DEPLOYMENT CHANGES |
| MIL-STD-464 Revision C:2010 | ELECTROMAGNETIC ENVIRONMENTAL EFFECTS REQUIREMENTS FOR SYSTEMS |
| PD CLC/TR 50538:2010 | Guide to EMC Directive conformity of equipment designed for military purposes |
| STANAG 4416 : 0 | NUCLEAR ELECTROMAGNETIC PULSE TESTING OF MUNITIONS CONTAINING ELECTRO-EXPLOSIVE DEVICES |
| AOP 39 : 2010 | GUIDANCE ON THE ASSESSMENT AND DEVELOPMENT OF INSENSITIVE MUNITIONS (IM) |
| STANAG 4560 : 2016 | ELECTRO-EXPLOSIVE DEVICES, ASSESSMENT AND TEST METHODS FOR CHARACTERIZATION - AOP-43 EDITION 3 |
| AOP 20 : 2017 | SAFETY, ARMING AND FUNCTIONING SYSTEMS MANUAL OF TESTS |
| STANAG 4187 : 2007 | FUZING SYSTEMS - SAFETY DESIGN REQUIREMENTS |
| STANAG 4599 : 2007 | WEAPON LAUNCHED GRENADE SYSTEMS, DESIGN SAFETY REQUIREMENTS AND SAFETY AND SUITABILITY FOR SERVICE EVALUATION |
| STANAG 4516 : 0 | CANNON (12.7 TO 40MM), DESIGN SAFETY REQUIREMENTS AND SAFETY AND SUITABILITY FOR SERVICE EVALUATION |
| STANAG 4497 : 2016 | HAND-EMPLACED MUNITIONS (HEM), PRINCIPLES FOR SAFE DESIGN |
| AEP-41 VOL 6 : 2014 | NATO IMPLEMENTATION OF UNIFIED PROTECTION AGAINST ELECTROMAGNETIC ENVIRONMENTAL EFFECTS (UE[3]) |
| AECTP-250 : 2014 | ELECTRICAL AND ELECTROMAGNETIC ENVIRONMENTAL CONDITIONS |
| AEP-41 VOL 7 : 2014 | NATO IMPLEMENTATION OF UNIFIED PROTECTION AGAINST ELECTROMAGNETIC ENVIRONMENTAL EFFECTS (UE[3]) - VOLUME 7: SUSTAINMENT TEST AND EVALUATION |
| S.R. CLC/TR 50538:2010 | |
| AOP 43 : 2016 | ELECTRO-EXPLOSIVE DEVICES, ASSESSMENT AND TEST METHODS FOR CHARACTERIZATION - GUIDELINES FOR STANAG 4560 |
| AAS3P-10 : 2011 | SAFETY AND SUITABILITY FOR SERVICE ASSESSMENT TESTING FOR SHOULDER LAUNCHED MUNITIONS |
| STANAG 4368 : 2011 | IGNITION SYSTEMS FOR ROCKET AND GUIDED MISSILE MOTORS, SAFETY DESIGN REQUIREMENTS |
| AOP 38 : 2006 | SPECIALIST GLOSSARY OF TERMS AND DEFINITIONS ON AMMUNITION SAFETY |
| VG 95370-27 : 2012 | ELECTROMAGNETIC COMPATIBILITY (EMC) - ELECTROMAGNETIC COMPATIBILITY OF AND IN SYSTEMS - PART 27: LIMITS FOR IMMUNITY TO EXTERNAL FIELD STRENGTHS |
| STANAG 4490 : 0 | EXPLOSIVES, ELECTROSTATIC DISCHARGE SENSITIVITY TEST(S) |
| DEFSTAN 59-411(PT5)/1(2007) : 2007 | ELECTROMAGNETIC COMPATIBILITY - PART 5: CODE OF PRACTICE FOR TRI-SERVICE DESIGN AND INSTALLATION |
| ASTM E 380 : 1993 | Standard Practice for Use of the Internation System of Units (SI) (the Modernized Metric System) (Withdrawn 1997) |
| AOP 24 : 1 | ELECTROSTATIC DISCHARGE, MUNITION ASSESSMENT AND TEST PROCEDURES |
| VG 95370-23 : 2012 | ELECTROMAGNETIC COMPATIBILITY (EMC) - ELECTROMAGNETIC COMPATIBILITY OF AND IN SYSTEMS - PART 23: LIMITS FOR IMMUNITY MARGINS AGAINST SYSTEM GENERATED FIELD STRENGTHS |
| MIL-STD-704 Revision F:2004 | AIRCRAFT ELECTRIC POWER CHARACTERISTICS |
| 2006/95/EC : 2006 | DIRECTIVE 2006/1995/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 12 DECEMBER 2006 ON THE HARMONISATION OF THE LAWS OF MEMBER STATES RELATING TO ELECTRICAL EQUIPMENT DESIGNED FOR USE WITHIN CERTAIN VOLTAGE LIMITS (CODIFIED VERSION) (TEXT WITH EEA RELEVANCE) |
| VG 95370-16 : 2011 | ELECTROMAGNETIC COMPATIBILITY (EMC) - ELECTROMAGNETIC COMPATIBILITY OF AND IN SYSTEMS - PART 16: TEST PROCEDURE FOR DISTURBING VOLTAGES AT RECEIVING ANTENNA TERMINALS |
| VG 95374-4 : 2013 | ELECTROMAGNETIC COMPATIBILITY (EMC) INCLUDING ELECTROMAGNETIC PULSE (EMP) AND LIGHTNING PROTECTION - PROGRAM AND PROCEDURES - PART 4: PROCEDURES FOR SYSTEMS AND EQUIPMENT |
| EN 61000-4-21:2011 | Electromagnetic compatibility (EMC) - Part 4-21: Testing and measurement techniques - Reverberation chamber test methods |
| AECTP-400 : 2006 | MECHANICAL ENVIRONMENTAL TESTS |
| MIL-STD-220 Revision C:2009 | Method of Insertion Loss Measurement |
| IEEE 299-2006 | IEEE Standard Method for Measuring the Effectiveness of Electromagnetic Shielding Enclosures |
| AECTP-250 : 2014 | ELECTRICAL AND ELECTROMAGNETIC ENVIRONMENTAL CONDITIONS |
| AECP-2 : 2002 | NATO NAVAL RADIO AND RADAR RADIATION HAZARDS MANUAL |
| STANAG 4135 : 0 | ELECTRICAL CHARACTERISTICS OF ROTATING ALTERNATING CURRENT GENERATING SETS |
| VG 95370-25 : 2003 | ELECTROMAGNETIC COMPATIBILITY - ELECTROMAGNETIC COMPATIBILITY OF AND IN SYSTEMS - PART 25: NOTES FOR ESTABLISHING LIMITS FOR COUPLING AND SHIELDING |
| STANAG 2345 : 2015 | MILITARY WORKPLACES - FORCE HEALTH PROTECTION REGARDING PERSONNEL EXPOSURE TO ELECTRIC, MAGNETIC, AND ELECTROMAGNETIC FIELDS, 0 HZ TO 300 GHZ |
| MIL-STD-469 Revision B:1996 | INTERFACE STANDARD FOR RADAR ENGINEERING INTERFACE REQUIREMENTS, ELECTROMAGNETIC COMPATIBILITY |
| SAE ARP 1972 : 2012 | RECOMMENDED MEASUREMENT PRACTICES AND PROCEDURES FOR EMC TESTING |
| MIL-HDBK-1857 Base Document:1998 | Grounding, Bonding and Shielding Design Practices |
| STANAG 4134 : 2008 | ELECTRICAL CHARACTERISTICS OF ROTATING 28-VOLT DC GENERATING SETS |
| BS EN 61000-4-2:2009 | Electromagnetic compatibility (EMC) Testing and measurement techniques. Electrostatic discharge immunity test |
| VG 95370-14 : 2011 | ELECTROMAGNETIC COMPATIBILITY (EMC) - ELECTROMAGNETIC COMPATIBILITY OF AND IN SYSTEMS - PART 14: TEST PROCEDURE FOR IMMUNITY MARGINS FOR SUSCEPTIBILITY TO CONDUCTED SYSTEM-GENERATED INTERFERENCES |
| SAE ARP 958 : 1999 | ELECTROMAGNETIC INTERFERENCE MEASUREMENT ANTENNAS; STANDARD CALIBRATION METHOD |
| VG 95370-12 : 2011 | ELECTROMAGNETIC COMPATIBILITY (EMC) - ELECTROMAGNETIC COMPATIBILITY OF AND IN SYSTEMS - PART 12: TEST PROCEDURES FOR RADIATED EMISSIONS OF SYSTEMS |
| MIL-STD-188-125 Revision A:1994 | HIGH-ALTITUDE ELECTROMAGNETIC PULSE (HEMP) PROTECTION FOR GROUND-BASED C41 FACILITIES PERFORMING CRITICAL, TIME-URGENT MISSIONS - VOLUME 1 - FIXED FACILITIES (METRIC) |
| MIL-STD-464 Revision C:2010 | ELECTROMAGNETIC ENVIRONMENTAL EFFECTS REQUIREMENTS FOR SYSTEMS |
| IEC 61000-4-6:2013 | Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
| IEEE C95.3-2002 | IEEE Recommended Practice for Measurements and Computations of Radio Frequency Electromagnetic Fields With Respect to Human Exposure to Such Fields, 100 kHz-300 GHz |
| AECTP-100 : 2016 | ENVIRONMENTAL GUIDELINES FOR DEFENCE MATERIEL |
| VG 95370-22 : 2012 | ELECTROMAGNETIC COMPATIBILITY (EMC) - ELECTROMAGNETIC COMPATIBILITY OF AND IN SYSTEMS - PART 22: LIMITS FOR RADIATED EMISSION OF SYSTEMS |
| ANSI/NCSL Z540 1 : 94(R2002) | CALIBRATION - CALIBRATION LABORATORIES AND MEASURING AND TEST EQUIPMENT - GENERAL REQUIREMENTS |
| MIL-STD-1310 Revision H:2009 | SHIPBOARD BONDING, GROUNDING, AND OTHER TECHNIQUES FOR ELECTROMAGNETIC COMPATIBILITY, ELECTROMAGNETIC PULSE (EMP) MITIGATION, AND SAFETY |
| VG 95370-10 : 2011 | ELECTROMAGNETIC COMPATIBILITY (EMC) - ELECTROMAGNETIC COMPATIBILITY OF AND IN SYSTEMS - PART 10: TEST PROCEDURE FOR CONDUCTED EMISSIONS |
| STANAG 4239 : 0 | ELECTROSTATIC DISCHARGE, MUNITIONS TEST PROCEDURES |
| AOP 25 : 1999 | RATIONALE AND GUIDANCE CONCERNING STANAG 4327, LIGHTNING, MUNITION ASSESSMENT AND TEST PROCEDURES |
| STANAG 4327 : 0 | LIGHTNING, MUNITION ASSESSMENT AND TEST PROCEDURES |
| STANAG 4370 : 2016 | ENVIRONMENTAL TESTING |
| MIL-STD-461 Revision G:2015 | REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF SUBSYSTEMS AND EQUIPMENT |
| MIL-HDBK-423 Base Document:1993 | HIGH-ALTITUDE ELECTROMAGNETIC PULSE (HEMP) PROTECTION FOR FIXED AND TRANSPORTABLE GROUND - BASED C4 1 FACILITIES - VOLUME 1 - FIXED FACILITIES |
| IEEE C63.2-2009 | American National Standard for Electromagnetic Noise and Field Strength Instrumentation, 10 Hz to 40 GHz Specifications |
| STANAG 4145 : 1991 | NUCLEAR SURVIVABILITY CRITERIA FOR ARMED FORCES MATERIEL AND INSTALLATIONS - AEP-4 |
| VG 95370-15 : 1998 | ELECTROMAGNETIC COMPATIBILITY - ELECTROMAGNETIC COMPATIBILITY OF AND IN SYSTEMS - PART 15: TEST METHODS FOR COUPLING AND SHIELDING |
| VG 95370-13 : 2011 | ELECTROMAGNETIC COMPATIBILITY (EMC) - ELECTROMAGNETIC COMPATIBILITY OF AND IN SYSTEMS - PART 13: TEST PROCEDURE FOR IMMUNITY MARGINS AGAINST SYSTEM GENERATED FIELD STRENGTHS |
| VG 95370-24 : 2012 | ELECTROMAGNETIC COMPATIBILITY (EMC) - ELECTROMAGNETIC COMPATIBILITY OF AND IN SYSTEMS - PART 24: LIMITS FOR IMMUNITY MARGINS FOR SUSCEPTIBILITY TO CONDUCTED SYSTEM-GENERATED INTERFERENCES |
| IEC 61000-4-2:2008 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
| VG 95370-26 : 2012 AMD 1 2013 | ELECTROMAGNETIC COMPATIBILITY (EMC) - ELECTROMAGNETIC COMPATIBILITY OF AND IN SYSTEMS - PART 26: LIMITS FOR DISTURBING VOLTAGES AT RECEIVING ANTENNA TERMINALS |
| STANAG 4416 : 0 | NUCLEAR ELECTROMAGNETIC PULSE TESTING OF MUNITIONS CONTAINING ELECTRO-EXPLOSIVE DEVICES |
| STANAG 1008 : 2004 | CHARACTERISTICS OF SHIPBOARD ELECTRICAL POWER SYSTEMS IN WARSHIPS OF THE NATO NAVIES |
| DEFSTAN 08-50/2(2010) : 2010 | INSTALLATION GUIDANCE FOR MEETING THE REQUIREMENTS OF NAVAL TEMPEST TESTING |
| AECTP-300 : 2006 | CLIMATIC ENVIRONMENTAL TESTS |
| STANAG 4238 : 2002 | MUNITION DESIGN PRINCIPLES, ELECTRICAL/ELECTROMAGNETIC ENVIRONMENTS |
| STANAG 4234 : 0 | ELECTROMAGNETIC RADIATION (RADIO FREQUENCY) - 200 KHz TO 40 GHz ENVIRONMENT - AFFECTING THE DESIGN OF MATERIEL FOR USE BY NATO FORCES |
| MIL-HDBK-237 Revision D:2005 | ELECTROMAGNETIC ENVIRONMENTAL EFFECTS AND SPECTRUM SUPPORTABILITY GUIDANCE FOR THE ACQUISITION PROCESS |
| MIL-HDBK-240 Revision A:2011 | HAZARDS OF ELECTROMAGNETIC RADIATION TO ORDNANCE TEST GUIDE |
| VG 95370-26 SUPP 1 : 2014 AMD 1 2017 | ELECTROMAGNETIC COMPATIBILITY (EMC) - ELECTROMAGNETIC COMPATIBILITY OF AND IN SYSTEMS - PART 26: LIMITS FOR INTERFERENCE VOLTAGES AT RECEIVING ANTENNAS; SUPPLEMENT 1: COMMENTS |
| AEP-18 : 1988 | THE NATO USERS GUIDE TO EMP TESTING AND SIMULATION |
| VG 95373-1 : 2016 | ELECTROMAGNETIC COMPATIBILITY (EMC) - ELECTROMAGNETIC COMPATIBILITY OF EQUIPMENT - PART 1: FUNDAMENTALS |
| AOP 43 : 2016 | ELECTRO-EXPLOSIVE DEVICES, ASSESSMENT AND TEST METHODS FOR CHARACTERIZATION - GUIDELINES FOR STANAG 4560 |
| ISO 10012-1:1992 | Quality assurance requirements for measuring equipment Part 1: Metrological confirmation system for measuring equipment |
| CISPR 16-1:1999+AMD1:2002 CSV | Specification for radio disturbance and immunity measuring apparatus and methods - Part 1: Radio disturbance and immunity measuring apparatus |
| STANAG 3856 : 0 | PROTECTION OF AIRCRAFT, CREW AND SUB-SYSTEMS IN FLIGHT AGAINST ELECTROSTATIC CHARGES - AEP-29 |
| VG 95370-11 : 2003 | ELECTROMAGNETIC COMPATIBILITY - ELECTROMAGNETIC COMPATIBILITY OF AND IN SYSTEMS - PART 11: TEST METHODS FOR INTERFERENCE VOLTAGES |
| STANAG 4560 : 2016 | ELECTRO-EXPLOSIVE DEVICES, ASSESSMENT AND TEST METHODS FOR CHARACTERIZATION - AOP-43 EDITION 3 |
| VG 95370-17 : 2011 | ELECTROMAGNETIC COMPATIBILITY (EMC) - ELECTROMAGNETIC COMPATIBILITY OF AND IN SYSTEMS - PART 17: TEST PROCEDURE FOR IMMUNITY TO EXTERNAL FIELD STRENGTHS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.