• Shopping Cart
    There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ACI 345R : 2011

Current

Current

The latest, up-to-date edition.

GUIDE FOR CONCRETE HIGHWAY BRIDGE DECK CONSTRUCTION

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-09-2011

£64.12
Excluding VAT

Chapter 1 - Introduction and scope
Chapter 2 - Definitions
Chapter 3 - Design and durability considerations
Chapter 4 - Concrete materials
Chapter 5 - Reinforcement
Chapter 6 - Placing, finishing, and curing
Chapter 7 - Overlays
Chapter 8 - References

Presents recommendations for bridge deck construction based on considerations of durability, concrete materials, reinforcement, placing, finishing and curing, and overlays.

Committee
345
DocumentType
Standard
Pages
46
PublisherName
American Concrete Institute
Status
Current
Supersedes

ACI 222.3R : 2011 GUIDE TO DESIGN AND CONSTRUCTION PRACTICES TO MITIGATE CORROSION OF REINFORCEMENT IN CONCRETE STRUCTURES
ACI 224.1R : 2007 CAUSES, EVALUATION, AND REPAIR OF CRACKS IN CONCRETE STRUCTURES

ASTM C 586 : 2011 : REDLINE TEST METHOD FOR POTENTIAL ALKALI REACTIVITY OF CARBONATE ROCKS AS CONCRETE AGGREGATES (ROCK-CYLINDER METHOD)
ASTM C 457/C457M : 2016 : REDLINE Standard Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete
ASTM C 1260 : 2014 : REDLINE Standard Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method)
AASHTO T 84 : 2013 METHOD OF TEST FOR SPECIFIC GRAVITY AND ABSORPTION OF FINE AGGREGATE
AASHTO MP 18M/MP 18 : 1900 SPECIFICATION FOR UNCOATED, CORROSION-RESISTANT, DEFORMED AND PLAIN ALLOY, BILLET-STEEL BARS FOR CONCRETE REINFORCEMENT AND DOWELS
ACI 503R : 1993 USE OF EPOXY COMPOUNDS WITH CONCRETE
AASHTO M 307 : 2013(R2017) SPECIFICATION FOR SILICA FUME USED IN CEMENTITIOUS MIXTURES
ACI PRC-308 : 2016 GUIDE TO EXTERNAL CURING OF CONCRETE
ASTM A 615/A615M : 2016-03 SPECIFICATION FOR DEFORMED AND PLAIN CARBON-STEEL BARS FOR CONCRETE REINFORCEMENT
ASTM C 1603 : 2016 : REDLINE Standard Test Method for Measurement of Solids in Water
AASHTO T 96 : 2002 METHOD OF TEST FOR RESISTANCE TO DEGRADATION OF SMALL-SIZE COARSE AGGREGATE BY ABRASION AND IMPACT IN THE LOS ANGELES MACHINE
ASTM C 1157/C1157M : 2017 : REDLINE Standard Performance Specification for Hydraulic Cement
ACI 440.1R : 2015 GUIDE FOR THE DESIGN AND CONSTRUCTION OF STRUCTURAL CONCRETE REINFORCED WITH FIBER-REINFORCED POLYMER (FRP) BARS
AASHTO M 85 : 2015 SPECIFICATION FOR PORTLAND CEMENT
ASTM C 150/C150M : 2017-04 SPECIFICATION FOR PORTLAND CEMENT
ASTM C 87/C87M : 2017 : REDLINE Standard Test Method for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar
ASTM C 88 : 2013-08 TEST METHOD FOR SOUNDNESS OF AGGREGATES BY USE OF SODIUM SULFATE OR MAGNESIUM SULFATE
ACI 212.4R : 2004 GUIDE FOR THE USE OF HIGH-RANGE WATER-REDUCING ADMIXTURES (SUPERPLASTICIZERS) IN CONCRETE
ACI PRC-548.3 : 2009 REPORT ON POLYMER-MODIFIED CONCRETE
ACI 305R : 2010 GUIDE TO HOT WEATHER CONCRETING
AASHTO T 113 : 2015 METHOD OF TEST FOR LIGHTWEIGHT PIECES IN AGGREGATE
ACI 234R : 2006 GUIDE FOR THE USE OF SILICA FUME IN CONCRETE
AASHTO T 27 : 2014 METHOD OF TEST FOR SIEVE ANALYSIS OF FINE AND COARSE AGGREGATES
ACI 548.8 : 2007 SPECIFICATION FOR TYPE EM (EPOXY MULTI-LAYER) POLYMER OVERLAY FOR BRIDGE AND PARKING GARAGE DECKS
ACI 548.9 : 2008 SPECIFICATION FOR TYPE ES (EPOXY SLURRY) POLYMER OVERLAYS FOR BRIDGE AND PARKING GARAGE DECKS
AASHTO T 161 : 2008 METHOD OF TEST FOR RESISTANCE OF CONCRETE TO RAPID FREEZING AND THAWING
ASTM C 171 : 2016 : REDLINE Standard Specification for Sheet Materials for Curing Concrete
AASHTO M 302 : 2015 SPECIFICATION FOR SLAG CEMENT FOR USE IN CONCRETE AND MORTARS
AASHTO M 31M/M 31 : 2015 STANDARD SPECIFICATION FOR DEFORMED AND PLAIN CARBON AND LOW-ALLOY STEEL BARS FOR CONCRETE REINFORCEMENT
ASTM A 706/A706M : 2016 : REDLINE Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement
ACI 211.4R : 2008 GUIDE FOR SELECTING PROPORTIONS FOR HIGH-STRENGTH CONCRETE USING PORTLAND CEMENT AND OTHER CEMENTITIOUS MATERIALS
ACI 221.1R : 1998 REPORT ON ALKALI-AGGREGATE REACTIVITY
ASTM C 539 : 1984 TEST METHOD FOR LINEAR THERMAL EXPANSION OF PORCELAIN ENAMEL AND GLAZE FRITS AND CERAMIC WHITEWARE MATERIALS BY INTERFEROMETRIC METHOD
ASTM C 1240 : 2015 : REDLINE Standard Specification for Silica Fume Used in Cementitious Mixtures
AASHTO TF 34 : 1995 TASK FORCE 34 - GUIDE SPECIFICATIONS FOR POLYMER CONCRETE BRIDGE DECK OVERLAYS
AASHTO T 19M/T 19 : 1900 METHOD OF TEST FOR BULK DENSITY ('UNIT WEIGHT') AND VOIDS IN AGGREGATE
ACI 544.3R : 2008 GUIDE FOR SPECIFYING, PROPORTIONING, AND PRODUCTION OF FIBER-REINFORCED CONCRETE
ACI 211.1 : 1991 SELECTING PROPORTIONS FOR NORMAL, HEAVYWEIGHT AND MASS CONCRETE
ACI 548.4 : 2011 SPECIFICATION FOR LATEX-MODIFIED CONCRETE (LCM) OVERLAYS
ACI 223R : 2010 GUIDE FOR THE USE OF SHRINKAGE-COMPENSATING CONCRETE
ACI 232.2R : 2003 REPORT ON THE USE OF FLY ASH IN CONCRETE
ASTM C 127 : 2015 : REDLINE Standard Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate (Withdrawn 2024)
ACI 504R : 90(R1997) GUIDE TO SEALING JOINTS IN CONCRETE STRUCTURES
ASTM C 672/C672M : 2012 Standard Test Method for Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals (Withdrawn 2021)
AASHTO M 284M/M 284 : 2009 SPECIFICATION FOR EPOXY-COATED REINFORCING BARS: MATERIALS AND COATING REQUIREMENTS
ACI 440R : 2007 REPORT ON FIBER-REINFORCED POLYMER (FRP) REINFORCEMENT FOR CONCRETE STRUCTURES
ACI 345.1R : 2016 GUIDE TO MAINTENANCE OF CONCRETE BRIDGE MEMBERS
ASTM E 274/E274M : 2015 : REDLINE Standard Test Method for Skid Resistance of Paved Surfaces Using a Full-Scale Tire
ACI 201.2R : 2008 Guide to Durable Concrete
ASTM C 666/C666M : 2015 : REDLINE Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing
ASTM C 845 : 2004 Standard Specification for Expansive Hydraulic Cement
ACI 306R : 2016 GUIDE TO COLD WEATHER CONCRETING
ACI 304.5R : 91(R1997) BATCHING, MIXING, AND JOB CONTROL OF LIGHTWEIGHT CONCRETE
ASTM C 309 : 2011 : REDLINE Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete
ACI 548.1R : 2009 GUIDE FOR THE USE OF POLYMERS IN CONCRETE
ACI 440.3R : 2012 GUIDE TEST METHODS FOR FIBER-REINFORCED POLYMERS (FRPS) FOR REINFORCING OR STRENGTHENING CONCRETE STRUCTURES
AASHTO T 131 : 2015 METHOD OF TEST FOR TIME OF SETTING OF HYDRAULIC CEMENT BY VICAT NEEDLE
ACI 365.1R : 2017 REPORT ON SERVICE LIFE PREDICTION
ASTM C 128 : 2015 : REDLINE Standard Test Method for Relative Density (Specific Gravity) and Absorption of Fine Aggregate
AASHTO T 26 : 1979 METHOD OF TEST FOR QUALITY OF WATER TO BE USED IN CONCRETE
AASHTO T 21M/T 21 : 2015 METHOD OF TEST FOR ORGANIC IMPURITIES IN FINE AGGREGATES FOR CONCRETE
AASHTO GFRP 1 : 0 LRFD BRIDGE DESIGN GUIDE SPECIFICATIONS FOR GFRP-REINFORCED CONCRETE BRIDGE DECKS AND TRAFFIC RAILINGS
ACI 233R : 2017 GUIDE TO THE USE OF SLAG CEMENT IN CONCRETE AND MORTAR
ASTM C 136 : 2006 Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates
ACI 363R : 2010 REPORT ON HIGH-STRENGTH CONCRETE
AASHTO T 85 : 2014 STANDARD METHOD OF TEST FOR SPECIFIC GRAVITY AND ABSORPTION OF COARSE AGGREGATE
ACI 211.2 : 1998 SELECTING PROPORTIONS FOR STRUCTURAL LIGHTWEIGHT CONCRETE
ASTM C 123 : 2004 Standard Test Method for Lightweight Particles in Aggregate
ACI 212.3R : 2016 REPORT ON CHEMICAL ADMIXTURES FOR CONCRETE
ACI 440.5 : 2008 SPECIFICATION FOR CONSTRUCTION WITH FIBER-REINFORCED POLYMER REINFORCING BARS
ACI 221R : 1996 GUIDE FOR USE OF NORMAL WEIGHT AND HEAVYWEIGHT AGGREGATES IN CONCRETE
AASHTO T 106M/T 106 : 1900 METHOD OF TEST FOR COMPRESSIVE STRENGTH OF HYDRAULIC CEMENT MORTAR (USING 50-MM OR 2-IN. CUBE SPECIMENS)
ACI 214R : 2011 GUIDE TO EVALUATION OF STRENGTH TEST RESULTS OF CONCRETE
ASTM C 117 : 2017 : REDLINE Standard Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing
AASHTO T 104 : 1999 METHOD OF TEST FOR SOUNDNESS OF AGGREGATE BY USE OF SODIUM SULFATE OR MAGNESIUM SULFATE
ACI PRC-201.1 : 2008 GUIDE FOR CONDUCTING A VISUAL INSPECTION OF CONCRETE IN SERVICE
ACI 440.6 : 2008 SPECIFICATION FOR CARBON AND GLASS FIBER-REINFORCED POLYMER BAR MATERIALS FOR CONCRETE REINFORCEMENT
ACI 309R : 2005 GUIDE FOR CONSOLIDATION OF CONCRETE
ASTM C 40 : 2004 Standard Test Method for Organic Impurities in Fine Aggregates for Concrete
AASHTO M 240 : 2015 SPECIFICATION FOR BLENDED HYDRAULIC CEMENT
ASTM C 494/C494M : 2017 : REDLINE Standard Specification for Chemical Admixtures for Concrete
ACI 548.5R : 2016 GUIDE FOR POLYMER CONCRETE OVERLAYS
ACI 325.6R : 88(R1997) TEXTURING CONCRETE PAVEMENTS
ASTM C 1137 : 2005 Standard Test Method for Degradation of Fine Aggregate Due to Attrition (Withdrawn 2011)
ACI 304R : 2000 GUIDE FOR MEASURING, MIXING, TRANSPORTING AND PLACING CONCRETE
ACI 308.1 : 2011 SPECIFICATION FOR CURING CONCRETE
AASHTO T 303 : 2000 METHOD OF TEST FOR ACCELERATED DETECTION OF POTENTIALLY DELETERIOUS EXPANSION OF MORTAR BARS DUE TO ALKALI-SILICA REACTION
ACI 304.2R : 2017 GUIDE TO PLACING CONCRETE BY PUMPING METHODS
ACI 232.1R : 2012 REPORT ON THE USE OF RAW OR PROCESSED NATURAL POZZOLANS IN CONCRETE

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.