ACI 213 : 1987(R1999)
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
GUIDE FOR STRUCTURAL LIGHTWEIGHT-AGGREGATE CONCRETE
23-07-2013
12-01-2013
Chapter 1 Introduction
1.1 Objective of the guide
1.2 Historical development
1.3 Economy of structural lightweight concrete
1.4 Lightweight aggregates - classifications
1.5 Definition of structural lightweight aggregate concrete
1.6 Structural lightweight aggregates
Chapter 2 Structural lightweight aggregates
2.1 Scope
2.2 Introduction
2.3 Internal structure of aggregates
2.4 Production of aggregates
2.5 Aggregate properties
Chapter 3 Proportioning, mixing and handling
3.1 Scope
3.2 Mix proportioning criteria
3.3 Materials
3.4 Proportioning and adjusting mixes
3.5 Mixing and delivery
3.6 Placing
3.7 Pumping structural lightweight concrete
3.8 Laboratory and field control
Chapter 4 Physical and mechanical properties of structural
lightweight aggregate concrete
4.1 Scope
4.2 Method of presenting data
4.3 Compressive strength
4.4 Cement content
4.5 Unit weight
4.6 Modulus of elasticity
4.7 Poisson's ratio
4.8 Creep
4.9 Drying shrinkage
4.10 Splitting tensile strength
4.11 Modulus of rupture
4.12 Durability
4.13 Bond strength (pullout tests)
4.14 Ultimate strength factors
4.15 Water absorption of concrete
4.16 Alkali-aggregate reaction
4.17 Thermal expansion
4.18 Heat flow properties
4.19 Fire endurance
4.20 Abrasion resistance
Chapter 5 Design of structural lightweight aggregate concrete
5.1 Scope
5.2 General considerations
5.3 Modulus of elasticity
5.4 Tensile strength
5.5 Development length
5.6 Creep and shrinkage
5.7 Deflection
5.8 Shear and diagonal tension
5.9 Strength design
5.10 Working strength design
5.11 Columns
5.12 Prestressed lightweight concrete applications
5.13 Thermal design considerations
5.14 Seismic design
5.15 Specifications
Chapter 6 References
6.1 Specified references
6.2 Cited references
The guide summarizes the present state of technology. It presents and interprets the data on lightweight aggregate concretes from many laboratory studies, accumulated experience resulting from successful use, and the performance of structural lightweight aggregate concrete in service. The guide is intended for all sections of ACI readership. It includes a definition of lightweight aggregate concrete for structural purposes and it discusses in condensed fashion the production methods for and inherent properties of structural lightweight aggregates. Other chapters follow on current practices for proportioning, mixing, transporting, and placing; properties of hardened concretes; and the design of structural concrete with special reference to ACI 318.
Committee |
213
|
DocumentType |
Standard
|
PublisherName |
American Concrete Institute
|
Status |
Superseded
|
SupersededBy |
ACI 304.5R : 91(R1997) | BATCHING, MIXING, AND JOB CONTROL OF LIGHTWEIGHT CONCRETE |
ACI 223 : 1998 | PRACTICE FOR THE USE OF SHRINKAGE-COMPENSATING CONCRETE |
ACI PRC-357 : 1984 | GUIDE FOR THE DESIGN AND CONSTRUCTION OF FIXED OFFSHORE CONCRETE STRUCTURES |
ACI 304.2R : 2017 | GUIDE TO PLACING CONCRETE BY PUMPING METHODS |
ACI 301 : 2016 | SPECIFICATIONS FOR STRUCTURAL CONCRETE |
ACI 318 : 2014 | BUILDING CODE REQUIREMENTS FOR STRUCTURAL CONCRETE AND COMMENTARY |
ACI 211.1 : 1991 | SELECTING PROPORTIONS FOR NORMAL, HEAVYWEIGHT AND MASS CONCRETE |
ACI 302.1R : 2015 | GUIDE TO CONCRETE FLOOR AND SLAB CONSTRUCTION |
ACI 318R : 1995 | COMMENTARY ON BUILDING CODE REQUIREMENTS FOR REINFORCED CONCRETE |
ACI 225R : 2016 | GUIDE TO THE SELECTION AND USE OF HYDRAULIC CEMENTS |
ACI 212.2R : 1986 | GUIDE FOR ADMIXTURES IN CONCRETE |
ACI 304.5R : 91(R1997) | BATCHING, MIXING, AND JOB CONTROL OF LIGHTWEIGHT CONCRETE |
ASTM C 512 : 2002 | Standard Test Method for Creep of Concrete in Compression |
ASTM C 234 : 1991 : REV A | Standard Test Method for Comparing Concretes on the Basis of the Bond Developed with Reinforcing Steel (Withdrawn 2000) |
ACI 211.2 : 1998 | SELECTING PROPORTIONS FOR STRUCTURAL LIGHTWEIGHT CONCRETE |
ASTM C 330 : 2005 | Standard Specification for Lightweight Aggregates for Structural Concrete |
ACI 308 : 92(R1997) | PRACTICE FOR CURING CONCRETE |
ACI 221R : 1996 | GUIDE FOR USE OF NORMAL WEIGHT AND HEAVYWEIGHT AGGREGATES IN CONCRETE |
ACI 212.1R : 1986 | ADMIXTURES FOR CONCRETE, AND GUIDE FOR USE OF ADMIXTURES IN CONCRETE |
ACI 304R : 2000 | GUIDE FOR MEASURING, MIXING, TRANSPORTING AND PLACING CONCRETE |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.