AAS3P-10 : 2011
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
SAFETY AND SUITABILITY FOR SERVICE ASSESSMENT TESTING FOR SHOULDER LAUNCHED MUNITIONS
Hardcopy , PDF
24-03-2023
English
20-10-2011
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1 INTRODUCTION
2 SCOPE
3 DEFINITIONS
4 FACILITIES AND INSTRUMENTATION
5 LIFE CYCLE ENVIRONMENTAL PROFILE (LCEP)
6 SAFETY TEST PLANNING
7 POST-TEST EXAMINATIONS
8 PROGRAM OVERVIEW
9 ADDITIONAL TESTS
10 MUNITION SAFETY DATA PACKAGE
ANNEX A - BACKGROUND/RATIONALE
ANNEX B - S3 TEST PROGRAM
ANNEX C - ENVIRONMENTAL TEST DESCRIPTIONS
ANNEX D - OPERATING TEST DESCRIPTIONS
ANNEX E - BREAKDOWN TEST AND CRITICAL ANALYSIS (BTCA)
ANNEX F - FACILITIES AND INSTRUMENTATION REQUIREMENTS
ANNEX G - MARGIN OF SAFETY CALCULATIONS FOR PRESSURE VESSELS
ANNEX H - NON-SEQUENTIAL TESTS/ASSESSMENTS
ANNEX I - ABBREVIATIONS/REFERENCES/RELATED DOCUMENTS
Describes personnel involved in the planning and implementation of S3 assessment testing of munitions to enable appropriate evidence to be collected covering the entire life cycle.
| DocumentType |
Standard
|
| Pages |
119
|
| PublisherName |
NATO
|
| Status |
Superseded
|
| SupersededBy |
| STANAG 4759 Ed: 1:2017 | SAFETY AND SUITABILITY FOR SERVICE ASSESSMENT TESTING FOR AIRCRAFT LAUNCHED MUNITIONS |
| STANAG 4761 : 2017 | SAFETY AND SUITABILITY FOR SERVICE ASSESSMENT TESTING OF LARGE CALIBRE AMMUNITION GREATER THAN 40 MM |
| STANAG 4758 : 2017 | SAFETY AND SUITABILITY FOR SERVICE ASSESSMENT TESTING FOR SURFACE AND UNDERWATER LAUNCHED MUNITIONS |
| DEFSTAN 00-35(PT4)/4(2006) : 2006 | ENVIRONMENTAL HANDBOOK FOR DEFENCE MATERIEL - PART 4: NATURAL ENVIRONMENTS |
| AOP 39 : 2010 | GUIDANCE ON THE ASSESSMENT AND DEVELOPMENT OF INSENSITIVE MUNITIONS (IM) |
| MIL-STD-648 Revision E:2016 | Specialized Shipping Containers |
| AECTP-400 : 2006 | MECHANICAL ENVIRONMENTAL TESTS |
| AECTP-250 : 2014 | ELECTRICAL AND ELECTROMAGNETIC ENVIRONMENTAL CONDITIONS |
| DEFSTAN 00-35(PT5)/4(2006) : 2006 | ENVIRONMENTAL HANDBOOK FOR DEFENCE MATERIEL - PART 5: INDUCED MECHANICAL ENVIRONMENTS |
| AOP 52 : 2016 | GUIDANCE ON SOFTWARE SAFETY DESIGN AND ASSESSMENT OF MUNITION-RELATED COMPUTING SYSTEMS |
| MIL-HDBK-46855 Revision A:1999 | HUMAN ENGINEERING PROGRAM - PROCESS AND PROCEDURES |
| STANAG 4187 : 2007 | FUZING SYSTEMS - SAFETY DESIGN REQUIREMENTS |
| MIL-STD-810 Revision G:2008 | ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS |
| STANAG 4157 : 2017 | SAFETY, ARMING AND FUNCTIONING SYSTEMS (SAF SYSTEMS) TESTING REQUIREMENTS |
| ENV 50166-1 : DRAFT 1995 | HUMAN EXPOSURE TO ELECTROMAGNETIC FIELDS - LOW-FREQUENCY (0 Hz TO 10 kHz) |
| STANAG 4629 : 2011 | SAFETY AND SUITABILITY FOR SERVICE ASSESSMENT TESTING OF NON-NUCLEAR MUNITIONS |
| AOP 20 : 2017 | SAFETY, ARMING AND FUNCTIONING SYSTEMS MANUAL OF TESTS |
| MIL-STD-1316 Revision F:2017 | Fuze Design, Safety Criteria for |
| STANAG 2345 : 2015 | MILITARY WORKPLACES - FORCE HEALTH PROTECTION REGARDING PERSONNEL EXPOSURE TO ELECTRIC, MAGNETIC, AND ELECTROMAGNETIC FIELDS, 0 HZ TO 300 GHZ |
| STANAG 4382 : 2003 | SLOW HEATING, MUNITIONS TEST PROCEDURES |
| AOP 21 : 2016 | INITIATION SYSTEMS: CHARACTERISATION AND SAFETY TEST METHODS AND PROCEDURES FOR DETONATING EXPLOSIVE COMPONENTS |
| STANAG 4241 : 2003 | BULLET IMPACT, MUNITION TEST PROCEDURES |
| MIL-STD-2105 Revision D:2011 | HAZARD ASSESSMENT TESTS FOR NON-NUCLEAR MUNITIONS |
| STANAG 2240 : 2005 | WEAPON DANGER AREAS/ZONES FOR UNGUIDED WEAPONS FOR USE BY NATO FORCES IN A GROUND ROLE: APPLICATIONS - ARSP-1 VOLUME 2 |
| AECTP-500 : 2016 | ELECTROMAGNETIC ENVIRONMENTAL EFFECTS TESTS AND VERIFICATION |
| STANAG 4363 : 2016 | INITIATION SYSTEMS: TESTING FOR THE ASSESSMENT OF DETONATING EXPLOSIVE COMPONENTS - AOP-21 EDITION 3 |
| AOP 7 : 2006 | MANUAL OF DATA REQUIREMENTS AND TESTS FOR THE QUALIFICATION OF EXPLOSIVE MATERIALS FOR MILITARY USE |
| MIL-STD-464 Revision C:2010 | ELECTROMAGNETIC ENVIRONMENTAL EFFECTS REQUIREMENTS FOR SYSTEMS |
| AECTP-100 : 2016 | ENVIRONMENTAL GUIDELINES FOR DEFENCE MATERIEL |
| AASTP-3 : 1995 | MANUAL OF NATO SAFETY PRINCIPLES FOR THE HAZARD CLASSIFICATION OF MILITARY AMMUNITION AND EXPLOSIVES |
| AECTP-240 : 2009 | MECHANICAL CONDITIONS |
| DEFSTAN 00-35(PT3)/4(2006) : 2006 | ENVIRONMENTAL HANDBOOK FOR DEFENCE MATERIEL - PART 3: ENVIRONMENTAL TEST METHODS |
| MIL-HDBK-764 Base Document:1990 | System Safety Engineering Design guide for Army Materiel |
| STANAG 4170 : 2008 | PRINCIPLES AND METHODOLOGY FOR THE QUALIFICATION OF EXPLOSIVE MATERIALS FOR MILITARY USE |
| ARSP-1 VOL 2 : 2005 | WEAPON DANGER AREAS/ZONES FOR UNGUIDED WEAPONS FOR USE BY NATO FORCES IN A GROUND ROLE - APPLICATIONS |
| STANAG 7201 : 2010 | THE HUMAN ENGINEERING TEST AND EVALUATION PROCEDURES FOR SYSTEMS, EQUIPMENT AND FACILITIES |
| MIL-STD-882 Revision E:2012 | System Safety |
| STANAG 4370 : 2016 | ENVIRONMENTAL TESTING |
| MIL-STD-461 Revision G:2015 | REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF SUBSYSTEMS AND EQUIPMENT |
| STANAG 4375 : 2010 | SAFETY DROP, MUNITION TEST PROCEDURE |
| STANAG 3606 : 2016 | LASER SAFETY FOR MILITARY USE |
| STANAG 4240 : 2003 | LIQUID FUEL/EXTERNAL FIRE, MUNITION TEST PROCEDURES |
| VG 95115 : 1996 | DEFENCE MATERIAL, TECHNICAL SAFETY - GENERAL PRINCIPLES - SYSTEM SAFETY PROGRAMS |
| AECTP-200 : 2009 | ENVIRONMENTAL CONDITIONS |
| IEC 61000-4-2:2008 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
| IEEE C95.1-2005 | IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz |
| MIL S 901 : D | SHOCK TESTS, HI [HIGH IMPACT] SHIPBOARD MACHINERY, EQUIPMENT AND SYSTEMS, REQUIREMENTS FOR |
| DIN EN 60825-1 : 2015-07 | SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS (IEC 60825-1:2014) |
| MIL-STD-1472 Revision G:2012 | HUMAN ENGINEERING |
| MIL-STD-1474 Revision E:2015 | NOISE LIMITS |
| MIL-HDBK-310 Base Document:1997 | DEPARTMENT OF DEFENSE HANDBOOK - GLOBAL CLIMATIC DATA FOR DEVELOPING MILITARY PRODUCTS |
| DEFSTAN 00-27/2(2005) : 2005 | THE MEASUREMENT OF IMPULSE NOISE FROM MILITARY WEAPONS, EXPLOSIVES AND PYROTECHNICS |
| STANAG 4150 : 79 AMD 2 | SHOCK TESTING OF HEAVYWEIGHT SURFACE SHIP EQUIPMENT IN FLOATING SHOCK VEHICLES |
| STANAG 4496 : 2006 | FRAGMENT IMPACT, MUNITIONS TEST PROCEDURE |
| AECTP-300 : 2006 | CLIMATIC ENVIRONMENTAL TESTS |
| MIL-STD-331 Revision D:2017 | FUZES, IGNITION SAFETY DEVICES AND OTHER RELATED COMPONENTS, ENVIRONMENTAL AND PERFORMANCE TESTS FOR |
| STANAG 4396 : 2003 | SYMPATHETIC REACTION - MUNITION TEST PROCEDURES |
| AECTP-230 : 2009 | CLIMATIC CONDITIONS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.