89/686/EEC : 1989 AMD 5 2012
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
COUNCIL DIRECTIVE OF 21 DECEMBER 1989 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO PERSONAL PROTECTIVE EQUIPMENT
09-03-2016
12-01-2013
Objective is to remove barriers to trade between Member States in personal protective equipment (PPE) by harmonizing basic requirements for the design, manufacture, testing and certification of these goods, while maintaining the highest possible level of safety. PPE means any device or appliance designed to be worn or held by an individual for protection against one or more safety and health hazards. The Directive applies to all PPE intended for professional and private use (sport, leisure, domestic use ) except PPE covered by another Directive with the same objectives.
DevelopmentNote |
Superseded by 2016/425/EU, but remains valid until 20/04/2018. (09/2017)
|
DocumentType |
Miscellaneous Product
|
PublisherName |
European Union
|
Status |
Superseded
|
SupersededBy |
10/30207275 DC : 0 | BS 8468-6.1 - RESPIRATORY PROTECTIVE DEVICES FOR USE AGAINST CHEMICAL, BIOLOGICAL, RADIOLOGICAL AND NUCLEAR (CBRN) AGENTS - PART 6.1: POSITIVE-PRESSURE COMPRESSED AIRLINE EQUIPMENT - SPECIFICATION |
BS EN 13277-7:2009 | Protective equipment for martial arts Additional requirements and test methods for hand and foot protectors |
S.R. CEN/TR 1030-2:2016 | HAND-ARM VIBRATION - GUIDELINES FOR VIBRATION HAZARDS REDUCTION - PART 2: MANAGEMENT MEASURES AT THE WORKPLACE |
15/30303027 DC : 0 | BS EN ISO 27065 - PROTECTIVE CLOTHING - PERFORMANCE REQUIREMENTS FOR PROTECTIVE CLOTHING WORN BY OPERATORS APPLYING LIQUID PESTICIDES AND FOR RE-ENTRY WORKERS |
NF CR 13033 : 98 FD | PERSONAL PROTECTIVE EQUIPMENT - LIFEJACKETS AND BUOYANCY AIDS - GUIDE FOR SELECTION AND USE |
NF EN 363 : 2008 | PERSONAL FALL PROTECTION EQUIPMENT - PERSONAL FALL PROTECTION SYSTEMS |
BS EN ISO 12312-2:2015 | Eye and face protection. Sunglasses and related eyewear Filters for direct observation of the sun |
BS EN ISO 12127-1:2015 | Clothing to protect against heat and flame. Determination of contact heat transmission through clothing or constituent materials Contact heat produced by heating cylinder |
I.S. EN 136:1998 | RESPIRATORY PROTECTIVE DEVICES - FULL-FACE MASKS - REQUIREMENTS, TESTING, MARKING |
11/30239230 DC : DRAFT MAR 2011 | BS EN ISO 14116 - PROTECTIVE CLOTHING - PROTECTION AGAINST HEAT AND FLAME - LIMITED FLAME SPREAD MATERIALS, MATERIAL ASSEMBLIES AND CLOTHING |
NF EN 13277-7 : 2009 | PROTECTIVE EQUIPMENT FOR MARTIAL ARTS - PART 7: ADDITIONAL REQUIREMENTS AND TEST METHODS FOR HAND AND FOOT PROTECTORS |
PD CEN/TR 1030-2:2016 | Hand-arm vibration. Guidelines for vibration hazards reduction Management measures at the workplace |
BS EN ISO 17491-4 : 2008 | PROTECTIVE CLOTHING - TEST METHODS FOR CLOTHING PROVIDING PROTECTION AGAINST CHEMICALS - PART 4: DETERMINATION OF RESISTANCE TO PENETRATION BY A SPRAY OF LIQUID (SPRAY TEST) (ISO 17491-4:2008) |
PREN 1127-1 : DRAFT 2017 | EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY |
PD CEN/TR 16386:2013 | Dentistry. Guidelines for handling methacrylate-based materials in the dental laboratory |
12/30256100 DC : 0 | BS EN 12878 - PIGMENTS FOR THE COLOURING OF BUILDING MATERIALS BASED ON CEMENT AND/OR LIME - SPECIFICATIONS AND METHODS OF TEST |
09/30204814 DC : 0 | BS EN 374-1 - PROTECTIVE GLOVES AGAINST CHEMICALS AND MICRO-ORGANISMS - PART 1: TERMINOLOGY AND PERFORMANCE REQUIREMENTS |
14/30293500 DC : 0 | BS EN 14225-3 - DIVING SUITS - PART 3: ACTIVELY HEATED OR COOLED SUIT SYSTEMS AND COMPONENTS - REQUIREMENTS AND TEST METHODS |
PREN 564 : DRAFT 2013 | MOUNTAINEERING EQUIPMENT - ACCESSORY CORD - SAFETY REQUIREMENTS AND TEST METHODS |
10/30196552 DC : 0 | BS EN ISO 15027-2 - IMMERSION SUITS - PART 2: ABANDONMENT SUITS, REQUIREMENTS INCLUDING SAFETY |
PREN 374-1 : DRAFT 2009 | PROTECTIVE GLOVES AGAINST CHEMICALS AND MICRO-ORGANISMS - PART 1: TERMINOLOGY AND PERFORMANCE REQUIREMENTS |
S.R. CEN/TR 15419:2017 | PROTECTIVE CLOTHING - GUIDELINES FOR SELECTION, USE, CARE AND MAINTENANCE OF CHEMICAL PROTECTIVE CLOTHING |
16/30341178 DC : 0 | BS EN ISO 11393-3 - PROTECTIVE CLOTHING FOR USERS OF HAND-HELD CHAIN-SAWS - PART 3: TEST METHODS FOR FOOTWEAR |
FD S70 100 : 2007 FD | PERSONAL PROTECTIVE EQUIPMENT (PPE) - GUIDE FOR DRAFTING THE INFORMATION TO BE SUPPLIED BY THE MANUFACTURERS TO THE USERS IN COMPLIANCE WITH DIRECTIVE 89/686/EEC |
BS 8467:2006 | Protective clothing. Personal protective ensembles for use against chemical, biological, radiological and nuclear (CBRN) agents. Categorization, performance requirements and test methods |
10/30216633 DC : 0 | BS EN 1621-1 - MOTORCYCLISTS' PROTECTIVE CLOTHING AGAINST MECHANICAL IMPACT - PART 1: MOTORCYCLISTS' LIMB JOINT IMPACT PROTECTORS - REQUIREMENTS AND TEST METHODS |
BS 8608:2014 | Specification for radio telemetry systems for use with respiratory protective devices used by emergency first responders |
00/563154 DC : DRAFT JUL 2000 | PREN ISO 12402-5 - PERSONAL FLOTATION DEVICES - PART 5: CLASS E (BUOYANCY AIDS - 50 N), SAFETY REQUIREMENTS |
BS EN ISO 374-1 : 2016 | PROTECTIVE GLOVES AGAINST DANGEROUS CHEMICALS AND MICRO-ORGANISMS - PART 1: TERMINOLOGY AND PERFORMANCE REQUIREMENTS FOR CHEMICAL RISKS (ISO 374-1:2016) |
12/30270980 DC : 0 | BS EN 1127-2 - EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING |
12/30260502 DC : 0 | BS EN 16448-2 - PROTECTIVE CLOTHING - BODY ARMOUR - PART 2: BULLET RESISTANCE - REQUIREMENTS AND TEST METHODS |
BS EN ISO 13688:2013 | Protective clothing. General requirements |
BS EN ISO 11612:2015 | Protective clothing. Clothing to protect against heat and flame. Minimum performance requirements |
00/562463 DC : DRAFT MAY 2000 | PREN ISO 12402-3 - PERSONAL FLOTATION DEVICES - PART 3: CLASS C (OFFSHORE LIFEJACKETS - 150 N), SAFETY REQUIREMENTS |
04/30095069 DC : 0 | BS EN 443 - FIREFIGHTERS HELMETS |
15/30322058 DC : 0 | BS EN 958 - MOUNTAINEERING EQUIPMENT - ENERGY ABSORBING SYSTEMS FOR USE IN KLETTERSTEIG (VIA FERRATA) CLIMBING - SAFETY REQUIREMENTS AND TEST METHODS |
03/115243 DC : DRAFT OCT 2003 | PR BS EN 511 - PROTECTIVE GLOVES AGAINST COLD |
03/115242 DC : DRAFT OCT 2003 | BS EN 14786 - PROTECTIVE CLOTHING - DETERMINATION OF RESISTANCE TO PENETRATION BY SPRAYED LIQUID CHEMICALS, EMULSIONS AND DISPERSIONS - ATOMIZER TEST |
15/30296817 DC : 0 | BS EN ISO 10256-2 - PROTECTIVE EQUIPMENT FOR USE IN ICE HOCKEY - PART 2: HEAD PROTECTION FOR SKATERS |
05/30128013 DC : DRAFT JULY 2005 | BS 5655-12 - LIFTS AND SERVICE LIFTS - PART 12: CODE OF PRACTICE FOR THE UNDERTAKING OF MODIFICATIONS TO EXISTING HYDRAULIC LIFTS |
BS 7971-1:2002 | Protective clothing and equipment for use in violent situations and in training General requirements |
09/30200151 DC : 0 | BS EN ISO 20346 - PERSONAL PROTECTIVE EQUIPMENT - PROTECTIVE FOOTWEAR |
BS 8468-2:2006 | Respiratory protective devices for use against chemical, biological, radiological and nuclear (CBRN) agents Negative pressure, air purifying devices with full face mask. Specification |
I.S. 355:2006 | SPECIFICATION FOR HELMETS FOR HURLING AND CAMOGIE PLAYERS |
PD CLC/TR 60079-32-1:2015 | Explosive atmospheres Electrostatic hazards, guidance |
BS EN 148-1:1999 | Respiratory protective devices: threads for facepieces Standard thread connection |
17/30360256 DC : 0 | BS EN 15288-2 - SWIMMING POOLS - PART 2: SAFETY REQUIREMENTS FOR OPERATION |
17/30365866 DC : 0 | BS EN 1127-1 - EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY |
16/30338920 DC : 0 | BS EN 14325 - PROTECTIVE CLOTHING AGAINST CHEMICALS - TEST METHODS AND PERFORMANCE CLASSIFICATION OF CHEMICAL PROTECTIVE CLOTHING MATERIALS, SEAMS, JOINS AND ASSEMBLAGES |
S.R. CEN TR 14560:2003 | GUIDANCE FOR SELECTION, USE, CARE AND MAINTENANCE OF PROTECTIVE CLOTHING AGAINST HEAT AND FLAME |
NF EN 13595-1 : 2003 | PROTECTIVE CLOTHING FOR PROFESSIONAL MOTORCYCLE RIDERS - JACKETS, TROUSERS AND ONE-PIECE OR DIVIDED SUITS - PART 1: GENERAL REQUIREMENTS |
NF EN 13819-2 : 2003 | HEARING PROTECTORS - TESTING - PART 2: ACOUSTIC TEST METHODS |
NF EN 15614 : 2007 | PROTECTIVE CLOTHING FOR FIREFIGHTERS - LABORATORY TEST METHODS AND PERFORMANCE REQUIREMENTS FOR WILDLAND CLOTHING |
NF EN 352-7 : 2003 | HEARING PROTECTORS - SAFETY REQUIREMENTS AND TESTING - PART 7: LEVEL-DEPENDANT EAR-PLUGS |
NF EN 352-6 : 2003 | HEARING PROTECTORS - SAFETY REQUIREMENTS AND TESTING - PART 6: EAR-MUFFS WITH ELECTRICAL AUDIO INPUT |
EN 15567-1:2015 | Sports and recreational facilities - Ropes courses - Part 1: Construction and safety requirements |
NF EN 13034 : 2005 + A1 2009 | PROTECTIVE CLOTHING AGAINST LIQUID CHEMICALS - PERFORMANCE REQUIREMENTS FOR CHEMICAL PROTECTIVE CLOTHING OFFERING LIMITED PROTECTIVE PERFORMANCE AGAINST LIQUID CHEMICALS (TYPE 6 AND TYPE PB [6] EQUIPMENT) |
BS EN 863:1996 | Protective clothing. Mechanical properties. Test method: puncture resistance |
BS EN ISO 12402-7 : 2007 | PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS |
BS EN 15567-2:2015 | Sports- and recreational facilities. Ropes courses Operation requirements |
BS EN 13641:2002 | Elimination or reduction of risk of infection related to in vitro diagnostic reagents |
BS EN 12094-2:2003 | Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for non-electrical automatic control and delay devices |
BS EN 813:1997 | Personal protective equipment for prevention of falls from a height. Sit harnesses |
BS EN 352-5:2002 | Hearing protectors. Safety requirements and testing Active noise reduction ear muffs |
BS EN ISO 15027-3:2012 | Immersion suits Test methods |
BS EN ISO 10256:2003 | Head and face protection for use in ice hockey |
BS EN 172:1995 | Specification for sunglare filters used in personal eye-protectors for industrial use |
BS EN ISO 13982-2:2004 | Protective clothing for use against solid particulates Test method of determination of inward leakage of aerosols of fine particles into suits |
UNE-EN 1127-1:2012 | Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology |
BS EN 14360:2004 | Protective clothing against rain. Test method for ready made garments. Impact from above with high energy droplets |
BS EN 142:2002 | Respiratory protective devices. Mouthpiece assemblies. Requirements, testing, marking |
BS EN 374-3:2003 | Protective gloves against chemicals and micro-organisms Determination of resistance to permeation by chemicals |
ISO 12402-7:2006 | Personal flotation devices Part 7: Materials and components Safety requirements and test methods |
BS EN 420 : 2003 | PROTECTIVE GLOVES - GENERAL REQUIREMENTS AND TEST METHODS |
BS EN 354:2010 | Personal fall protection equipment. Lanyards |
BS EN 13781:2012 | Protective helmets for drivers and passengers of snowmobiles and bobsleighs |
ISO 20349:2010 | Personal protective equipment Footwear protecting against thermal risks and molten metal splashes as found in foundries and welding Requirements and test method |
BS EN 361:2002 | Personal protective equipment against falls from a height. Full body harnesses |
BS EN 1149-3:2004 | Protective clothing. Electrostatic properties Test methods for measurement of charge decay |
BS EN 14605 : 2005 | PROTECTIVE CLOTHING AGAINST LIQUID CHEMICALS - PERFORMANCE REQUIREMENTS FOR CLOTHING WITH LIQUID-TIGHT (TYPE 3) OR SPRAY-TIGHT (TYPE 4) CONNECTIONS, INCLUDING ITEMS PROVIDING PROTECTION TO PARTS OF THE BODY ONLY (TYPES PB [3] AND PB [4]) |
BS EN 13595-1:2002 | Protective clothing for professional motorcycle riders. Jackets, trousers and one piece or divided suits General requirements |
BS EN 13484:2012 | Helmets for users of luges |
ISO 6942:2002 | Protective clothing — Protection against heat and fire — Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat |
BS EN 12094-8:2006 | Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for connectors |
BS EN 353-2:2002 | Personal protective equipment against falls from a height Guided type fall arresters including a flexible anchor line |
BS EN 374-1:2003 | Protective gloves against chemicals and micro-organisms Terminology and performance requirements |
BS EN 352-3:2002 | Hearing protectors. Safety requirements and testing Ear-muffs attached to an industrial safety helmet |
BS EN 893:2010 | Mountaineering equipment. Crampons. Safety requirements and test methods |
BS EN 966 : 2012 | HELMETS FOR AIRBORNE SPORTS |
BS EN 12492:2012 | Mountaineering equipment. Helmets for mountaineers. Safety requirements and test methods |
I.S. EN 14126:2003+AC:2004 | PROTECTIVE CLOTHING - PERFORMANCE REQUIREMENTS AND TESTS METHODS FOR PROTECTIVE CLOTHING AGAINST INFECTIVE AGENTS |
BS EN 13087-4:2012 | Protective helmets. Test methods Retention system effectiveness |
BS EN 12270:2013 | Mountaineering equipment. Chocks. Safety requirements and test methods |
BS EN 13819-1:2002 | Hearing protectors. Testing Physical test methods |
BS EN 14021:2003 | Stone shields for off-road motorcycling suited to protect riders against stones and debris. Requirements and test methods |
BS EN 1497:2007 | Personal fall protection equipment. Rescue harnesses |
BS EN 14404 : 2004 | PERSONAL PROTECTIVE EQUIPMENT - KNEE PROTECTORS FOR WORK IN THE KNEELING POSITION |
BS EN ISO 20346:2014 | Personal protective equipment. Protective footwear |
BS EN 360:2002 | Personal protective equipment against falls from a height. Retractable type fall arresters |
DIN EN 1127-2:2002-07 | EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING |
EN 1078:2012+A1:2012 | Helmets for pedal cyclists and for users of skateboards and roller skates |
CEN/TR 1030-2:2016 | Hand-arm vibration - Guidelines for vibration hazards reduction - Part 2: Management measures at the workplace |
EN 1077:2007 | Helmets for alpine skiers and snowboarders |
EN 13087-10:2012 | Protective helmets - Test methods - Part 10: Resistance to radiant heat |
EN 13087-6:2012 | Protective helmets - Test methods - Part 6: Field of vision |
EN 12275:2013 | Mountaineering equipment - Connectors - Safety requirements and test methods |
EN 13034:2005+A1:2009 | Protective clothing against liquid chemicals - Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment) |
EN ISO 12401:2009 | Small craft - Deck safety harness and safety line - Safety requirements and test methods (ISO 12401:2009) |
EN 1149-3:2004 | Protective clothing - Electrostatic properties - Part 3: Test methods for measurement of charge decay |
EN 12278:2007 | Montaineering equipment - Pulleys - Safety requirements and test methods |
EN 13087-2:2012 | Protective helmets - Test methods - Part 2: Shock absorption |
EN 13546:2002+A1:2007 | Protective clothing - Hand, arm, chest, abdomen, leg, foot and genital protectors for field hockey goal keepers, and shin protectors for field players - Requirements and test methods |
EN 1005-1:2001+A1:2008 | Safety of machinery - Human physical performance - Part 1: Terms and definitions |
NF EN 381-10 : 2003 | PROTECTIVE CLOTHING FOR USERS OF HAND-HELD CHAINSAWS - PART 10: TEST METHOD FOR UPPER BODY PROTECTORS |
EN 133:2001 | Respiratory protective devices - Classification |
EN 13089:2011+A1:2015 | Mountaineering equipment - Ice-tools - Safety requirements and test methods |
EN 13567:2002+A1:2007 | Protective clothing - Hand, arm, chest, abdomen, leg, genital and face protectors for fencers - Requirements and test methods |
EN 12094-2:2003 | Fixed firefighting systems - Components for gas extinguishing systems - Part 2: Requirements and test methods for non-electrical automatic control and delay devices |
EN 13087-5:2012 | Protective helmets - Test methods - Part 5: Retention system strength |
EN 12021:2014 | Respiratory equipment - Compressed gases for breathing apparatus |
EN 12094-8:2006 | Fixed firefighting systems - Components for gas extinguishing systems - Part 8: Requirements and test methods for connectors |
EN 13794:2002 | Respiratory protective devices - Self-contained closed-circuit breathing apparatus for escape - Requirements, testing, marking |
PD ISO/TR 2801:2007 | Clothing for protection against heat and flame. General recommendations for selection, care and use of protective clothing |
BS EN 15288-2:2008 | Swimming pools Safety requirements for operation |
12/30268236 DC | BS EN 943-2. Protective clothing against solid, liquid and gaseous chemicals, including liquid and solid aerosols. Performance requirements for gas-tight (Type 1) chemical protective suits for emergency teams (ET) |
BS EN 12277 : 2015 | MOUNTAINEERING EQUIPMENT - HARNESSES - SAFETY REQUIREMENTS AND TEST METHODS |
16/30332885 DC : 0 | BS EN 342 - PROTECTIVE CLOTHING - ENSEMBLES AND GARMENTS FOR PROTECTION AGAINST COLD |
13/30279677 DC : 0 | BS EN 15567-1 - SPORTS AND RECREATIONAL FACILITIES - ROPES COURSES - PART 1: CONSTRUCTION AND SAFETY REQUIREMENTS |
BS EN 60903:2003 | Live working. Gloves of insulating material |
12/30271676 DC : 0 | BS EN 353-1 - REV PERSONAL FALL PROTECTION EQUIPMENT - GUIDED TYPE FALL ARRESTERS INCLUDING AN ANCHOR LINE - PART 1: GUIDED TYPE FALL ARRESTERS INCLUDING A RIGID ANCHOR LINE |
BS EN 16805:2015 | Diving equipment. Diving mask. Requirements and test methods |
10/30236372 DC : 0 | BS EN 12276 - MOUNTAINEERING EQUIPMENT - FRICTIONAL ANCHORS - SAFETY REQUIREMENTS AND TEST METHODS |
15/30256940 DC : 0 | BS EN ISO 10256-1 - PROTECTIVE EQUIPMENT FOR USE IN ICE HOCKEY - PART 1: GENERAL REQUIREMENTS |
PREN 958 : DRAFT 2015 | METHODSNEERING EQUIPMENT - ENERGY ABSORBING SYSTEMS FOR USE IN KLETTERSTEIG (VIA FERRATA) CLIMBING - SAFETY REQUIREMENTS AND TEST METHODS |
BS EN 1149-5:2008 | Protective clothing. Electrostatic properties Material performance and design requirements |
14/30310789 DC : 0 | BS EN 565 - MOUNTAINEERING EQUIPMENT - TAPE - SAFETY REQUIREMENTS AND TEST METHODS |
15/30324466 DC : 0 | BS EN 16716 - MOUNTAINEERING EQUIPMENT - AVALANCHE AIRBAG SYSTEMS - SAFETY REQUIREMENTS AND TEST METHODS |
10/30234587 DC : 0 | BS 8468-5 - RESPIRATORY PROTECTIVE DEVICES FOR USE AGAINST CHEMICAL, BIOLOGICAL, RADIOLOGICAL AND NUCLEAR (CBRN) AGENTS - PART 5: DUAL-MODE APPARATUS - SPECIFICATION |
BS EN 1621-4:2013 | Motorcyclists\' protective clothing against mechanical impact Motorcyclists\' inflatable protectors. Requirements and test methods |
06/30156009 DC : DRAFT SEP 2006 | BS EN 13921 - PERSONAL PROTECTIVE EQUIPMENT - ERGONOMIC PRINCIPLES |
12/30254411 DC : 0 | BS EN 13138-1 - BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR BUOYANT AIDS TO BE WORN |
BS EN ISO 25649-1:2017 | Floating leisure articles for use on and in the water Classification, materials, general requirements and test methods |
BS EN ISO 20349:2010 | Personal protective equipment. Footwear protecting against thermal risks and molten metal splashes as found in foundries and welding. Requirements and test method |
06/30157890 DC : 0 | BS EN 50496 - DETERMINATION OF WORKERS' EXPOSURE TO ELECTROMAGNETIC FIELDS AND ASSESSMENT OF RISK AT A BROADCAST SITE |
BS EN ISO 10256-1:2016 | Protective equipment for use in ice hockey General requirements |
EN ISO 374-1:2016 | Protective gloves against dangerous chemicals and micro-organisms - Part 1: Terminology and performance requirements for chemical risks (ISO 374-1:2016) |
PREN 892 : DRAFT 2011 | MOUNTAINEERING EQUIPMENT - DYNAMIC MOUNTAINEERING ROPES - SAFETY REQUIREMENTS AND TEST METHODS |
16/30347802 DC : 0 | BS EN 1149-5 - PROTECTIVE CLOTHING - ELECTROSTATIC PROPERTIES - PART 5: MATERIAL PERFORMANCE AND DESIGN REQUIREMENTS |
BS 7373-2:2001 | Product specifications Guide to identifying criteria for a product specification and to declaring product conformity |
15/30313584 DC : 0 | BS ISO 25649-1 - FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
BS EN ISO 12401:2009 | Small craft. Deck safety harness and safety line. Safety requirements and test methods |
PREN 565 : DRAFT 2014 | MOUNTAINEERING EQUIPMENT - TAPE - SAFETY REQUIREMENTS AND TEST METHODS |
04/30095730 DC : DRAFT APR 2004 | EN 13832-3 - FOOTWEAR PROTECTING AGAINST CHEMICALS AND MICRO-ORGANISMS - PART 3: FOOTWEAR HIGHLY PROTECTIVE AGAINST CHEMICALS |
BS EN 16716:2017 | Mountaineering equipment. Avalanche airbag systems. Safety requirements and test methods |
15/30296827 DC : 0 | BS EN ISO 10256-4 - PROTECTIVE EQUIPMENT FOR USE IN ICE HOCKEY - PART 4: HEAD AND FACE PROTECTION FOR GOALKEEPERS |
PREN 13911 : DRAFT 2013 | PROTECTIVE CLOTHING FOR FIREFIGHTERS - REQUIREMENTS AND TEST METHODS FOR FIRE HOODS FOR FIREFIGHTERS |
BS EN ISO 374-5:2016 | Protective gloves against dangerous chemicals and micro-organisms Terminology and performance requirements for micro-organisms risks |
09/30200146 DC : 0 | BS EN ISO 20344 - PERSONAL PROTECTIVE EQUIPMENT - TEST METHODS FOR FOOTWEAR |
BS EN ISO 20471 : 2013 | HIGH VISIBILITY CLOTHING - TEST METHODS AND REQUIREMENTS (ISO 20471:2013) |
PREN 943-2 : DRAFT 2016 | PROTECTIVE CLOTHING AGAINST DANGEROUS SOLID, LIQUID AND GASEOUS CHEMICALS, INCLUDING LIQUID AND SOLID AEROSOLS - PART 2: PERFORMANCE REQUIREMENTS FOR TYPE 1 (GAS-TIGHT) CHEMICAL PROTECTIVE SUITS FOR EMERGENCY TEAMS (ET) |
PREN 342 : DRAFT 2016 | PROTECTIVE CLOTHING - ENSEMBLES AND GARMENTS FOR PROTECTION AGAINST COLD |
13/30282890 DC : 0 | BS EN 564 - MOUNTAINEERING EQUIPMENT - ACCESSORY CORD - SAFETY REQUIREMENTS AND TEST METHODS |
00/562571 DC : DRAFT JUN 2000 | BS EN 13921-4 - PERSONAL PROTECTIVE EQUIPMENT - ERGONOMIC PRINCIPLES - PART 4: THERMAL CHARACTERISTICS |
12/30265636 DC : 0 | BS ISO 20346 - PERSONAL PROTECTIVE EQUIPMENT - PROTECTIVE FOOTWEAR |
BS EN 15333-1:2008 | Respiratory equipment. Open-circuit umbilical supplied compressed gas diving apparatus Demand apparatus |
04/30095724 DC : DRAFT APR 2004 | EN 13832-1 - FOOTWEAR PROTECTING AGAINST CHEMICALS AND MICRO-ORGANISMS - PART 1: TERMINOLOGY AND TEST METHODS |
05/30127970 DC : DRAFT JAN 2005 | EN 1127-1 - EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY |
PD CEN/TR 15321:2006 | Guidelines on the selection, use, care and maintenance of protective clothing |
UNE-EN 16716:2017 | Mountaineering equipment - Avalanche Airbag systems - Safety requirements and test methods |
S.R. CLC/TR 60079-32-1:2015 | EXPLOSIVE ATMOSPHERES - PART 32-1: ELECTROSTATIC HAZARDS - GUIDANCE |
PREN 1621-1 : DRAFT 2010 | MOTORCYCLISTS' PROTECTIVE CLOTHING AGAINST MECHANICAL IMPACT - PART 1: MOTORCYCLISTS' LIMB JOINT IMPACT PROTECTORS - REQUIREMENTS AND TEST METHODS |
DIN EN 71-13:2014-07 | Safety of toys - Part 13: Olfactory board games, cosmetic kits and gustative games |
UNI EN 71-4 : 2013 | SAFETY OF TOYS - PART 4: EXPERIMENTAL SETS FOR CHEMISTRY AND RELATED ACTIVITIES |
I.S. EN 1127-1:2011 | EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY |
S.R. CEN TR 15419:2006 | PROTECTIVE CLOTHING - GUIDELINES FOR SELECTION, USE, CARE AND MAINTENANCE OF CHEMICAL PROTECTIVE CLOTHING |
DIN EN ISO 10256-1:2015-08 (Draft) | PROTECTIVE EQUIPMENT FOR USE IN ICE HOCKEY - PART 1: GENERAL REQUIREMENTS (ISO 10256-1:2016) |
NF EN 342 : 2017 | PROTECTIVE CLOTHING - ENSEMBLES AND GARMENTS FOR PROTECTION AGAINST COLD |
PD CEN/TR 16953:2017 | Medical gloves for single use. Guidance for selection |
PREN 1809 : DRAFT 2012 | DIVING EQUIPMENT - BUOYANCY COMPENSATORS - FUNCTIONAL AND SAFETY REQUIREMENTS, TEST METHODS |
S.R. CEN TR 16149:2011 | GUIDANCE DOCUMENT FOR DRAFTING CEN/TC 158 STANDARDS |
PREN 50321 : DRAFT 2013 | LIVE WORKING - FOOTWEAR FOR ELECTRICAL PROTECTION - INSULATING FOOTWEAR AND OVERBOOTS |
BS EN ISO 9151:2016 | Protective clothing against heat and flame. Determination of heat transmission on exposure to flame |
NF EN ISO 12127-2 : 2008 | CLOTHING FOR PROTECTION AGAINST HEAT AND FLAME - DETERMINATION OF CONTACT HEAT TRANSMISSION THROUGH PROTECTIVE CLOTHING OR CONSTITUENT MATERIALS - PART 2: TEST METHOD USING CONTACT HEAT PRODUCED BY DROPPING SMALL CYLINDERS |
PREN 50575 : DRAFT 2012 | POWER, CONTROL AND COMMUNICATION CABLES - CABLES FOR GENERAL APPLICATIONS IN CONSTRUCTION WORKS SUBJECT TO REACTION TO FIRE REQUIREMENTS |
PREN 374-2 : DRAFT 2013 | PROTECTIVE GLOVES AGAINST CHEMICALS AND MICRO-ORGANISMS - PART 2: DETERMINATION OF RESISTANCE TO PENETRATION |
CEN/TR 15419:2017 | Protective clothing - Guidelines for selection, use, care and maintenance of chemical protective clothing |
EN 1146:2005 | Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus incorporating a hood for escape - Requirements, testing, marking |
NF EN 352-1 : 2003 | HEARING PROTECTORS - GENERAL REQUIREMENTS - PART 1: EAR-MUFFS |
NF EN 14387 : 2004 + A1 2008 | RESPIRATORY PROTECTIVE DEVICES - GAS FILTER(S) AND COMBINED FILTER(S) - REQUIREMENTS, TESTING, MARKING |
DIN EN 1005-1:2009-04 | SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 1: TERMS AND DEFINITIONS |
BS EN 13034 : 2005 | PROTECTIVE CLOTHING AGAINST LIQUID CHEMICALS - PERFORMANCE REQUIREMENTS FOR CHEMICAL PROTECTIVE CLOTHING OFFERING LIMITED PROTECTIVE PERFORMANCE AGAINST LIQUID CHEMICALS (TYPE 6 AND TYPE PB [6] EQUIPMENT) |
BS EN 1150:1999 | Protective clothing. Visibility clothing for non-professional use. Test methods and requirements |
BS EN 14225-4:2005 | Diving suits One atmosphere suits (ADS). Human factors requirements and test methods |
BS EN 533:1997 | Protective clothing. Protection against heat and flame. Limited flame spread materials and material assemblies |
BS EN 471 : 2003 | HIGH-VISIBILITY WARNING CLOTHING FOR PROFESSIONAL USE - TEST METHODS AND REQUIREMENTS |
BS EN 143:2000 | Respiratory protective devices. Particle filters. Requirements, testing, marking |
BS EN 15567-1:2015 | Sports and recreational facilities. Ropes courses Construction and safety requirements |
BS EN 175:1997 | Personal protection. Equipment for eye and face protection during welding and allied processes |
BS EN 13274-5:2001 | Respiratory protective devices. Methods of test Climatic conditions |
BS EN 133:2001 | Respiratory protective devices. Classification |
BS EN 1385:2012 | Helmets for canoeing and white water sports |
BS EN 421:2010 | Protective gloves against ionizing radiation and radioactive contamination |
BS EN 13138-1:2008 | Buoyant aids for swimming instruction Safety requirements and test methods for buoyant aids to be worn |
ISO 14877:2002 | Protective clothing for abrasive blasting operations using granular abrasives |
BS EN 13595-2:2002 | Protective clothing for professional motorcycle riders. Jackets, trousers and one piece or divided suits Test method for determination of impact abrasion resistance |
BS EN 958:2017 | Mountaineering equipment. Energy absorbing systems for use in klettersteig (via ferrata) climbing. Safety requirements and test methods |
BS EN 12083:1998 | Respiratory protective devices. Filters with breathing hoses, (non-mask mounted filters). Particle filters, gas filters, and combined filters. Requirements, testing, marking |
BS EN 15614:2007 | Protective clothing for firefighters. Laboratory test methods and performance requirements for wildland clothing |
BS EN 340:2003 | Protective clothing. General requirements |
BS EN 13567 : 2002 | PROTECTIVE CLOTHING - HAND, ARM, CHEST, ABDOMEN, LEG, GENITAL AND FACE PROTECTORS FOR FENCERS - REQUIREMENTS AND TEST METHODS |
BS EN ISO 12402-9 : 2006 | PERSONAL FLOTATION DEVICES - PART 9: TEST METHODS |
BS EN 134:1998 | Respiratory protective devices. Nomenclature of components |
I.S. EN 1005-1:2002 | SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 1: TERMS AND DEFINITIONS |
I.S. EN 13087-6:2012 | PROTECTIVE HELMETS - TEST METHODS - PART 6: FIELD OF VISION |
EN 14387:2004+A1:2008 | Respiratory protective devices - Gas filter(s) and combined filter(s) - Requirements, testing, marking |
I.S. EN 137:2006 | RESPIRATORY PROTECTIVE DEVICES - SELF-CONTAINED OPEN-CIRCUIT COMPRESSED AIR BREATHING APPARATUS WITH FULL FACE MASK - REQUIREMENTS, TESTING, MARKING |
EN 352-7:2002 | Hearing protectors - Safety requirements and testing - Part 7: Level-dependent ear-plugs |
EN 352-6:2002 | Hearing protectors - Safety requirements and testing - Part 6: Ear-muffs with electrical audio input |
EN 352-2:2002 | Hearing protectors - General requirements - Part 2: Ear-plugs |
I.S. EN 15567-2:2015 | SPORTS AND RECREATIONAL FACILITIES - ROPES COURSES - PART 2: OPERATION REQUIREMENTS |
DIN EN 1127-1:2011-10 | EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY |
I.S. EN 13087-5:2012 | PROTECTIVE HELMETS - TEST METHODS - PART 5: RETENTION SYSTEM STRENGTH |
I.S. EN 1127-2:2014 | EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING |
EN 352-1:2002 | Hearing protectors - General requirements - Part 1: Ear-Muffs |
I.S. EN 13087-4:2012 | PROTECTIVE HELMETS - TEST METHODS - PART 4: RETENTION SYSTEM EFFECTIVENESS |
DIN EN 12094-8:2006-07 | Fixed firefighting systems - Components for gas extinguishing systems - Part 8: Requirements and test methods for connectors |
I.S. EN 13781:2012 | PROTECTIVE HELMETS FOR DRIVERS AND PASSENGERS OF SNOWMOBILES AND BOBSLEIGHS |
I.S. EN 1497:2007 | PERSONAL FALL PROTECTION EQUIPMENT - RESCUE HARNESSES |
I.S. EN 12568:2010 | FOOT AND LEG PROTECTORS - REQUIREMENTS AND TEST METHODS FOR TOECAPS AND PENETRATION RESISTANT INSERTS |
EN 13819-1:2002 | Hearing protectors - Testing - Part 1: Physical test methods |
EN 352-3:2002 | Hearing protectors - General requirements - Part 3: Ear-muffs attached to an industrial safety helmet |
I.S. EN 13087-10:2012 | PROTECTIVE HELMETS - TEST METHODS - PART 10: RESISTANCE TO RADIANT HEAT |
EN 352-8:2008 | Hearing protectors - Safety requirements and testing - Part 8: Entertainment audio ear-muffs |
I.S. EN 12094-8:2006 | FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 8: REQUIREMENTS AND TEST METHODS FOR CONNECTORS |
PD 2777:1994 | Fabric flammability and burning accidents |
BS 5426:1993 | Specification for workwear and career wear |
BS 5655-11:2005 | Lifts and service lifts Code of practice for the undertaking of modifications to existing electric lifts |
BS 6739:2009 | Code of practice for instrumentation in process control systems: installation design and practice |
NF EN ISO 6942 : 2002 | PROTECTIVE CLOTHING - PROTECTION AGAINST HEAT AND FIRE - METHOD OF TEST: EVALUATION OF MATERIALS AND MATERIAL ASSEMBLIES WHEN EXPOSED TO A SOURCE OF RADIANT HEAT |
BS 6183-1:2000 | Protective equipment for cricketers General requirements |
BS 7985:2009 | Code of practice for the use of rope access methods for industrial purposes |
NF EN 166 : 2002 | PERSONAL EYE-PROTECTION - SPECIFICATIONS |
NF EN ISO 20345 : 2012 | PERSONAL PROTECTIVE EQUIPMENT - SAFETY FOOTWEAR |
BS 7985:2013 | Code of practice for the use of rope access methods for industrial purposes. Recommendations and guidance supplementary to BS ISO 22846 |
BS 5655-12:2005 | Lifts and service lifts Code of practice for the undertaking of modifications to existing hydraulic lifts |
BS 7184:2001 | Selection, use and maintenance of chemical protective clothing. Guidance |
BS 5883:1996 | Specification for surface swimming goggles |
BS 4275:1997 | Guide to implementing an effective respiratory protective device programme |
BS 6526:1998 | Domestic oven gloves. Requirements and test methods |
UNE-EN 71-13:2015 | Safety of toys - Part 13: Olfactory board games, cosmetic kits and gustative games |
DIN EN 15288-2:2009-05 | SWIMMING POOLS - PART 2: SAFETY REQUIREMENTS FOR OPERATION |
FD CEN ISO/TR 11610 : 2004 FD | PROTECTIVE CLOTHING - VOCABULARY |
I.S. EN ISO 10256-1:2016 | PROTECTIVE EQUIPMENT FOR USE IN ICE HOCKEY - PART 1: GENERAL REQUIREMENTS (ISO 10256-1:2016) |
DIN EN 71-13 E : 2014 | SAFETY OF TOYS - PART 13: OLFACTORY BOARD GAMES, COSMETIC KITS AND GUSTATIVE GAMES |
BS EN 352-8:2008 | Hearing protectors. Safety requirements and testing Entertainment audio ear-muffs |
BS EN 16350:2014 | Protective gloves. Electrostatic properties |
BS EN 50496:2008 | Determination of workers\' exposure to electromagnetic fields and assessment of risk at a broadcast site |
NF EN 14058 : 2017 | PROTECTIVE CLOTHING - GARMENTS FOR PROTECTION AGAINST COOL ENVIRONMENTS |
PD CEN/CLC/TR 16832:2015 | Selection, use, care and maintenance of personal protective equipment for preventing electrostatic risks in hazardous areas (explosion risks) |
PREN 360 : DRAFT 2016 | PERSONAL PROTECTIVE EQUIPMENT AGAINST FALLS FROM A HEIGHT - RETRACTABLE TYPE FALL ARRESTERS |
I.S. EN 12942:1999 | RESPIRATORY PROTECTIVE DEVICES - POWER ASSISTED FILTERING DEVICES INCORPORATING FULL FACE MASKS, HALF MASKS OR QUARTER MASKS - REQUIREMENTS, TESTING, MARKING |
00/562572 DC : DRAFT JUN 2000 | BS EN 13921-6 - PERSONAL PROTECTIVE EQUIPMENT - ERGONOMIC PRINCIPLES - PART 6: SENSORY FACTORS |
BS EN 14594:2005 | Respiratory protective devices. Continuous flow compressed air line breathing apparatus. Requirements, testing, marking |
BS PD CEN/TR 16832 : 2015 | SELECTION, USE, CARE AND MAINTENANCE OF PERSONAL PROTECTIVE EQUIPMENT FOR PREVENTING ELECTROSTATIC RISKS IN HAZARDOUS AREAS (EXPLOSION RISKS) |
12/30265285 DC : 0 | BS EN 16473 - FIREFIGHTERS HELMETS - HELMETS FOR TECHNICAL RESCUE |
14/30293497 DC : 0 | BS EN 14225-2 - DIVING SUITS - PART 2: DRY SUITS - REQUIREMENTS AND TEST METHODS |
BS EN ISO 12127-2:2007 | Clothing for protection against heat and flame. Determination of contact heat transmission through protective clothing or constituent materials Test method using contact heat produced by dropping small cylinders |
13/30268672 DC : 0 | BS EN 1809 - DIVING EQUIPMENT - BUOYANCY COMPENSATORS - FUNCTIONAL AND SAFETY REQUIREMENTS, TEST METHODS |
03/100433 DC : DRAFT JAN 2003 | EN 14605 - PROTECTIVE CLOTHING FOR USE AGAINST LIQUID CHEMICALS - PERFORMANCE REQUIREMENTS FOR CHEMICAL PROTECTIVE CLOTHING WITH LIQUID-TIGHT (TYPE 3) OR SPRAY-TIGHT (TYPE 4) CONNECTIONS BETWEEN PARTS OF THE CLOTHING, INCLUDING ITEMS PROVIDING PROTECTION TO PARTS OF THE BODY ONLY |
00/562462 DC : DRAFT MAY 2000 | PREN ISO 12402-2 - PERSONAL FLOTATION DEVICES - PART 2: CLASS B (OFFSHORE LIFEJACKETS, EXTREME CONDITIONS - 275 N), SAFETY REQUIREMENTS |
PREN 13158 : DRAFT 2017 | PROTECTIVE CLOTHING - PROTECTIVE JACKETS, BODY AND SHOULDER PROTECTORS FOR EQUESTRIAN USE, FOR HORSE RIDERS AND THOSE WORKING WITH HORSES, AND FOR HORSE DRIVERS - REQUIREMENTS AND TEST METHODS |
11/30246171 DC : 0 | BS EN 71-4 - SAFETY OF TOYS - PART 4: EXPERIMENTAL SETS FOR CHEMISTRY AND RELATED ACTIVITIES |
08/30184738 DC : DRAFT JUNE 2008 | BS EN 353-1 - PERSONAL PROTECTIVE EQUIPMENT AGAINST FALLS FROM A HEIGHT - PART 1: GUIDED TYPE FALL ARRESTERS INCLUDING A RIGID ANCHOR LINE |
99/566214 DC : DRAFT NOV 1999 | PREN ISO 14876-2 - PROTECTIVE CLOTHING - BODY ARMOUR - PART 2: BULLET RESISTANCE - REQUIREMENTS AND TEST METHODS |
14/30281804 DC : 0 | BS 8608 - SPECIFICATION FOR RADIO TELEMETRY SYSTEMS FOR THE FIRE AND RESCUESERVICE |
09/30200155 DC : 0 | BS EN ISO 20347 - PERSONAL PROTECTIVE EQUIPMENT - OCCUPATIONAL FOOTWEAR |
BS 8468-4:2008 | Respiratory protective devices for use against chemical, biological, radiological and nuclear (CBRN) agents Powered air-purifying respirators. Specification |
07/30169528 DC : 0 | BS EN 15333-2 - RESPIRATORY EQUIPMENT - OPEN-CIRCUIT UMBILICAL SUPPLIED COMPRESSED GAS DIVING APPARATUS - PART 2: FREE FLOW APPARATUS |
00/565107 DC : DRAFT NOV 2000 | BS EN 14052 - SPECIFICATION FOR HIGH PERFORMANCE INDUSTRIAL SAFETY HELMETS |
BS EN 15649-1 : 2009 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
12/30260505 DC : 0 | BS EN 16448-3 - PROTECTIVE CLOTHING - BODY ARMOUR - PART 3: KNIFE AND SPIKE RESISTANCE - REQUIREMENTS AND TEST METHODS |
16/30341170 DC : 0 | BS EN ISO 11393-1 - PROTECTIVE CLOTHING FOR USERS OF HAND-HELD CHAIN-SAWS - PART 1: TEST RIG FOR TESTING RESISTANCE TO CUTTING BY A CHAIN-SAW |
13/30282508 DC : 0 | BS EN 1073-1 - PROTECTIVE CLOTHING AGAINST RADIOACTIVE CONTAMINATION - PART 1: REQUIREMENTS AND TEST METHODS FOR VENTILATED PROTECTIVE CLOTHING AGAINST PARTICULATE RADIOACTIVE CONTAMINATION |
09/30200131 DC : 0 | BS EN ISO 20345 - PERSONAL PROTECTIVE EQUIPMENT - SAFETY FOOTWEAR |
11/30239233 DC : DRAFT MAR 2011 | BS EN ISO 11611 - PROTECTIVE CLOTHING FOR USE IN WELDING AND ALLIED PROCESSES |
13/30284837 DC : 0 | BS EN 16689 - PROTECTIVE CLOTHING TO BE WORN BY FIREFIGHTERS DURING TECHNICAL RESCUE OPERATIONS |
13/30259878 DC : 0 | BS EN ISO 12312-2 - EYE AND FACE PROTECTION - SUNGLASSES AND RELATED EYEWEAR - PART 2: FILTERS FOR DIRECT OBSERVATION OF THE SUN |
BS DD253(2001) : 2001 | MOUTHGUARDS FOR USE IN SPORT AND RECREATION - REQUIREMENTS AND TEST METHODS |
11/30239239 DC : DRAFT MAR 2011 | BS EN ISO 11612 - PROTECTIVE CLOTHING - CLOTHING TO PROTECT AGAINST HEAT AND FLAME - MINIMUM PERFORMANCE REQUIREMENTS |
11/30247808 DC : 0 | BS EN 12270 - MOUNTAINEERING EQUIPMENT - CHOCKS - SAFETY REQUIREMENTS AND TEST METHODS |
11/30215084 DC : 0 | BS EN ISO 6529 - PROTECTIVE CLOTHING - PROTECTION AGAINST CHEMICALS - DETERMINATION OF RESISTANCE OF PROTECTIVE CLOTHING MATERIALS TO PERMEATION BY LIQUIDS AND GASES |
ISO/TR 2801:2007 | Clothing for protection against heat and flame General recommendations for selection, care and use of protective clothing |
NF EN 13158 : 2018 | PROTECTIVE CLOTHING - PROTECTIVE JACKETS, BODY AND SHOULDER PROTECTORS FOR EQUESTRIAN USE, FOR HORSE RIDERS AND THOSE WORKING WITH HORSES, AND FOR HORSE DRIVERS - REQUIREMENTS AND TEST METHODS |
BS EN 16473:2014 | Firefighters helmets. Helmets for technical rescue |
00/563156 DC : DRAFT JULY 2000 | PREN ISO 12402-9 - PERSONAL FLOTATION DEVICES - PART 9: TEST METHODS FOR CLASSES A TO F |
10/30217692 DC : 0 | BS 8468-6.2 - RESPIRATORY PROTECTIVE DEVICES FOR USE AGAINST CHEMICAL, BIOLOGICAL, RADIOLOGICAL AND NUCLEAR (CBRN) AGENTS - PART 6.2: CONSTANT FLOW COMPRESSED AIRLINE EQUIPMENT - SPECIFICATION |
00/562569 DC : DRAFT JUN 2000 | BS EN 13921-1 - PERSONAL PROTECTIVE EQUIPMENT - ERGONOMIC PRINCIPLES - PART 1: GENERAL REQUIREMENTS FOR THE DESIGN AND THE SPECIFICATION |
16/30336443 DC : 0 | BS EN 207 - PERSONAL EYE-PROTECTION EQUIPMENT - FILTERS AND EYE-PROTECTORS AGAINST LASER RADIATION (LASER EYE-PROTECTORS) |
PREN 13634 : DRAFT 2017 | PROTECTIVE FOOTWEAR FOR MOTORCYCLE RIDERS - REQUIREMENTS AND TEST METHODS |
PREN 469 : DRAFT 2015 | PROTECTIVE CLOTHING FOR FIREFIGHTERS - PERFORMANCE REQUIREMENTS FOR PROTECTIVE CLOTHING FOR FIREFIGHTING |
PREN 13832-1 : DRAFT 2017 | FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 1: TERMINOLOGY AND TEST METHODS |
13/30280708 DC : 0 | BS EN 374-2 - PROTECTIVE GLOVES AGAINST CHEMICALS AND MICRO-ORGANISMS - PART 2: DETERMINATION OF RESISTANCE TO PENETRATION |
04/30095733 DC : DRAFT APR 2004 | EN 13832-4 - FOOTWEAR PROTECTING AGAINST CHEMICALS AND MICRO-ORGANISMS - PART 4: FOOTWEAR PROTECTIVE AGAINST MICRO-ORGANISMS |
UNE-EN 15649-1:2010 | Floating leisure articles for use on and in the water - Part 1: Classification, materials, general requirements and test methods |
UNE-EN ISO 10256-1:2017 | Protective equipment for use in ice hockey - Part 1: General requirements (ISO 10256-1:2016) |
EN 12277:2015 | Mountaineering equipment - Harnesses - Safety requirements and test methods |
PREN 407 : DRAFT 2017 | PROTECTIVE GLOVES AGAINST THERMAL RISKS (HEAT AND/OR FIRE) |
PREN 795 : DRAFT 2009 | PERSONAL FALL PROTECTION EQUIPMENT - ANCHOR DEVICES |
CEN/CLC/TR 16832:2015 | Selection, use, care and maintenance of personal protective equipment for preventing electrostatic risks in hazardous areas (explosion risks) |
CEN/TR 16953:2017 | Medical gloves for single use - Guidance for selection |
ISO 10819:2013 | Mechanical vibration and shock — Hand-arm vibration — Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand |
PD CEN/TR 14560:2003 | Guidelines for selection, use, care and maintenance of protective clothing against heat and flame |
PREN 15567-1 : DRAFT 2013 | SPORTS AND RECREATIONAL FACILITIES - ROPES COURSES - PART 1: CONSTRUCTION AND SAFETY REQUIREMENTS |
EN 388 : 1994 | PROTECTIVE GLOVES AGAINST MECHANICAL RISKS |
BS EN 388 : 2016 | PROTECTIVE GLOVES AGAINST MECHANICAL RISKS |
ISO 374-1:2016 | Protective gloves against dangerous chemicals and micro-organisms — Part 1: Terminology and performance requirements for chemical risks |
EN 14325:2004 | Protective clothing against chemicals - Test methods and performance classification of chemical protective clothing materials, seams, joins and assemblages |
NF EN 13595-2 : 2003 | PROTECTIVE CLOTHING FOR PROFESSIONAL MOTORCYCLE RIDERS - JACKETS, TROUSERS AND ONE-PIECE OR DIVIDED SUITS - PART 2: TEST METHOD FOR DETERMINATION OF IMPACT ABRASION RESISTANCE |
NF EN 893 : 2011 | MOUNTAINEERING EQUIPMENT - CRAMPONS - SAFETY REQUIREMENTS AND TEST METHODS |
NF EN 352-4 : 2001 AMD 1 2006 | HEARING PROTECTORS - SAFETY REQUIREMENTS AND TESTING - PART 4: LEVEL-DEPENDENT EAR-MUFFS |
DIN EN 1127-2:2014-09 | EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING |
DIN EN 12568:2010-10 | FOOT AND LEG PROTECTORS - REQUIREMENTS AND TEST METHODS FOR TOECAPS AND PENETRATION RESISTANT INSERTS |
NF EN 352-2 : 2003 | HEARING PROTECTORS - GENERAL REQUIREMENTS - PART 2: EAR-PLUGS |
DIN EN 12477:2005-09 | Protective gloves for welders; German version EN 12477:2001 + A1:2005 |
NF EN 13819-1 : 2003 | HEARING PROTECTORS - TESTING - PART 1: PHYSICAL TEST METHODS |
ISO 11612:2015 | Protective clothing — Clothing to protect against heat and flame — Minimum performance requirements |
BS EN ISO 6529:2001 | Protective clothing. Protection against chemicals. Determination of resistance of protective clothing materials to permeation by liquids and gases |
BS EN 1078 : 2012 | HELMETS FOR PEDAL CYCLISTS AND FOR USERS OF SKATEBOARDS AND ROLLER SKATES |
BS EN 168:2002 | Personal eye-protection. Non-optical test methods |
BS EN 397 : 2012 | INDUSTRIAL SAFETY HELMETS |
BS EN 13087-5:2012 | Protective helmets. Test methods Retention system strength |
BS EN 170:2002 | Personal eye-protection. Ultraviolet filters.Transmittance requirements and recommended use |
ISO 12311:2013 | Personal protective equipment — Test methods for sunglasses and related eyewear |
BS EN 795:2012 | Personal fall protection equipment. Anchor devices |
BS EN ISO 12402-3 : 2006 | PERSONAL FLOTATION DEVICES - PART 3: LIFEJACKETS, PERFORMANCE LEVEL 150 - SAFETY REQUIREMENTS |
BS EN 1621-1:2012 | Motorcyclists\' protective clothing against mechanical impact Motorcyclists\' limb joint impact protectors. Requirements and test methods |
BS EN 1082-1:1997 | Protective clothing. Gloves and arm guards protecting against cuts and stabs by hand knives Chain mail gloves and arm guards |
BS EN 13277-2:2000 | Protective equipment for martial arts Additional requirements and test methods for instep protectors, shin protectors and forearm protectors |
ISO 12127-1:2015 | Clothing for protection against heat and flame Determination of contact heat transmission through protective clothing or constituent materials Part 1: Contact heat produced by heating cylinder |
BS EN 381-7:1999 | Protective clothing for users of hand-held chain saws Requirements for chainsaw protective gloves |
BS EN 13274-4:2001 | Respiratory protective devices. Methods of test Flame tests |
ISO 12402-2:2006 | Personal flotation devices Part 2: Lifejackets, performance level 275 Safety requirements |
EN 420:2003+A1:2009 | Protective gloves - General requirements and test methods |
EN ISO 12402-10:2006 | Personal flotation devices - Part 10: Selection and application of personal flotation devices and other relevant devices (ISO 12402-10:2006) |
EN 13274-4:2001 | Respiratory protective devices - Methods of test - Part 4: Flame tests |
EN 355:2002 | Personal protective equipment against falls from a height - Energy absorbers |
EN 381-11:2002 | Protective clothing for users of hand-held chainsaws - Part 11: Requirements for upper body protectors |
EN 362:2004 | Personal protective equipment against falls from a height - Connectors |
EN 813:2008 | Personal fall protection equipment - Sit harnesses |
EN 142:2002 | Respiratory protective devices - Mouthpiece assemblies - Requirements, testing, marking |
EN 13795-1:2002+A1:2009 | Surgical drapes, gowns and clean air suits, used as medical devices, for patients, clinical staff and equipment - Part 1: General requirements for manufacturers, processors and products |
EN 137:2006 | Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with full face mask - Requirements, testing, marking |
UNI EN 1127-2 : 2014 | EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING |
UNI EN 12568 : 2010 | FOOT AND LEG PROTECTORS - REQUIREMENTS AND TEST METHODS FOR TOECAPS AND PENETRATION RESISTANT INSERTS |
EN ISO 374-5:2016 | Protective gloves against dangerous chemicals and micro-organisms - Part 5: Terminology and performance requirements for micro-organisms risks (ISO 374-5:2016) |
UNI EN 1005-1 : 2009 | SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 1: TERMS AND DEFINITIONS |
S.R. CEN/TR 16953:2017 | MEDICAL GLOVES FOR SINGLE USE - GUIDANCE FOR SELECTION |
16/30280808 DC : 0 | BS 7971-5 - PROTECTIVE CLOTHING AND EQUIPMENT FOR USE IN VIOLENT SITUATIONS AND IN TRAINING - PART 5: FOOTWEAR - REQUIREMENTS AND TEST METHODS |
BS EN ISO 10862:2009 | Small craft. Quick release system for trapeze harness |
16/30338534 DC : 0 | BS EN 144-2 - RESPIRATORY PROTECTIVE DEVICES - GAS CYLINDER VALVES - PART 2: OUTLET CONNECTIONS |
PREN 144-2 : DRAFT 2016 | RESPIRATORY PROTECTIVE DEVICES - GAS CYLINDER VALVES - PART 2: OUTLET CONNECTIONS |
PREN 144-1 : DRAFT 2016 | RESPIRATORY PROTECTIVE DEVICES - GAS CYLINDER VALVES - PART 1: INLET CONNECTIONS |
BS 8468-5:2011 | Respiratory protective devices for use against chemical, biological, radiological and nuclear (CBRN) agents Dual-mode apparatus. Specification |
BS 8468-3.1:2009 | Respiratory protective devices for use against chemical, biological, radiological and nuclear (CBRN) agents Self-contained open-circuit compressed air breathing apparatus incorporating a hood for escape. Specification |
PREN 12878 : DRAFT 2012 | PIGMENTS FOR THE COLOURING OF BUILDING MATERIALS BASED ON CEMENT AND/OR LIME - SPECIFICATIONS AND METHODS OF TEST |
I.S. EN ISO 25649-1:2017 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS (ISO 25649-1:2017) |
14/30281166 DC : 0 | BS EN 50321 - LIVE WORKING - FOOTWEAR FOR ELECTRICAL PROTECTION - INSULATING FOOTWEAR AND OVERBOOTS |
BS EN 15333-2:2009 | Respiratory equipment. Open-circuit umbilical supplied compressed gas diving apparatus Free flow apparatus |
I.S. EN 13794:2002 | RESPIRATORY PROTECTIVE DEVICES - SELF-CONTAINED CLOSED-CIRCUIT BREATHING APPARATUS FOR ESCAPE - REQUIREMENTS, TESTING, MARKING |
10/30196548 DC : 0 | BS EN ISO 15027-1 - IMMERSION SUITS - PART 1: CONSTANT WEAR SUITS, REQUIREMENTS INCLUDING SAFETY |
10/30196555 DC : 0 | BS EN ISO 15027-3 - IMMERSION SUITS - PART 3: TEST METHODS |
BS 8468-1:2006 | Respiratory equipment for use against chemical, biological, radiological and nuclear (CBRN) agents Positive pressure, self-contained, open-circuit breathing apparatus. Specification |
I.S. EN ISO 10256:2003 | HEAD AND FACE PROTECTION FOR USE IN ICE HOCKEY |
16/30341711 DC : 0 | BS EN 943-2 - PROTECTIVE CLOTHING AGAINST DANGEROUS SOLID, LIQUID AND GASEOUS CHEMICALS, INCLUDING LIQUID AND SOLID AEROSOLS - PART 2: PERFORMANCE REQUIREMENTS FOR TYPE 1 (GAS-TIGHT) CHEMICAL PROTECTIVE SUITS FOR EMERGENCY TEAMS (ET) |
BS 8469:2007 | Personal protective equipment for firefighters. Assessment of ergonomic performance and compatibility. Requirements and test methods |
NF EN 144-1 : 2000 AMD 2 2005 | RESPIRATORY PROTECTIVE DEVICES - GAS CYLINDER VALVES - PART 1: THREAD CONNECTIONS FOR INSERT CONNECTOR |
14/30288533 DC : 0 | BS EN 13634:2010 - PROTECTIVE FOOTWEAR FOR MOTORCYCLE RIDERS - REQUIREMENTS AND TEST METHODS |
14/30288142 DC : 0 | BS EN 16716 - MOUNTAINEERING EQUIPMENT - AVALANCHE AIRBAG SYSTEMS - SAFETY REQUIREMENTS AND TEST METHODS |
11/30247805 DC : 0 | BS EN 567 - MOUNTAINEERING EQUIPMENT - ROPE CLAMPS - SAFETY REQUIREMENTS AND TEST METHODS |
04/30112373 DC : DRAFT SEP 2004 | PREN 1149-1 - PROTECTIVE CLOTHING - ELECTROSTATIC PROPERTIES - PART 1: TEST METHOD FOR MEASUREMENT OF SURFACE RESTIVITY |
14/30299477 DC : 0 | BS EN 568 - MOUNTAINEERING EQUIPMENT - ICE ANCHORS - SAFETY REQUIREMENTS AND TEST METHODS |
00/564562 DC : DRAFT SEP 2000 | BS EN 469 - PROTECTIVE CLOTHING FOR FIREFIGHTERS - LABORATORY TEST METHODS AND PERFORMANCE REQUIREMENTS FOR PROTECTIVE CLOTHING FOR FIREFIGHTING |
13/30290127 DC : 0 | BS EN 13911 - PROTECTIVE CLOTHING FOR FIREFIGHTERS - REQUIREMENTS AND TEST METHODS FOR FIRE HOODS FOR FIREFIGHTERS |
03/117128 DC : 0 | EN 1486 - PROTECTIVE CLOTHING FOR FIREFIGHTERS - TEST METHODS AND REQUIREMENTS FOR REFLECTIVE CLOTHING FOR SPECIALISED FIRE-FIGHTING |
16/30341182 DC : 0 | BS EN ISO 11393-4 - PROTECTIVE CLOTHING FOR USERS OF HAND-HELD CHAIN-SAWS - PART 4: TEST METHODS AND PERFORMANCE REQUIREMENTS FOR PROTECTIVE GLOVES |
11/30242690 DC : 0 | BS EN 892 - MOUNTAINEERING EQUIPMENT - DYNAMIC MOUNTAINEERING ROPES - SAFETY REQUIREMENTS AND TEST METHODS |
11/30241728 DC : DRAFT MAR 2011 | BS EN ISO 13287 - PERSONAL PROTECTIVE EQUIPMENT - FOOTWEAR - TEST METHOD FOR SLIP RESISTANCE |
BS 7971-10:2014 | Protective clothing and equipment for use in violent situations and in training Coveralls. Requirements and test methods |
CEN/TR 16832 : 2015 COR 2015 | SELECTION, USE, CARE AND MAINTENANCE OF PERSONAL PROTECTIVE EQUIPMENT FOR PREVENTING ELECTROSTATIC RISKS IN HAZARDOUS AREAS (EXPLOSION RISKS) |
DIN EN 15649-1:2014-06 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
PREN 16523-2 : DRAFT 2013 | DETERMINATION OF MATERIAL RESISTANCE TO PERMEATION BY CHEMICALS - PART 2: PERMEATION BY GASEOUS CHEMICAL UNDER CONDITIONS OF CONTINUOUS CONTACT |
PREN 14325 : DRAFT 2016 | PROTECTIVE CLOTHING AGAINST CHEMICALS - TEST METHODS AND PERFORMANCE CLASSIFICATION OF CHEMICAL PROTECTIVE CLOTHING MATERIALS, SEAMS, JOINS AND ASSEMBLAGES |
BS EN 15151-1:2012 | Mountaineering equipment. Braking devices Braking devices with manually assisted locking, safety requirements and test methods |
16/30341186 DC : 0 | BS EN ISO 11393-5 - PROTECTIVE CLOTHING FOR USERS OF HAND-HELD CHAIN-SAWS - PART 5: TEST METHODS AND PERFORMANCE REQUIREMENTS FOR PROTECTIVE GAITERS |
17/30351919 DC : 0 | BS EN 13634 - PROTECTIVE FOOTWEAR FOR MOTORCYCLE RIDERS - REQUIREMENTS AND TEST METHODS |
16/30296872 DC : 0 | BS ISO 10256-5 - PROTECTIVE EQUIPMENT FOR USE IN ICE HOCKEY - PART 5: NECK LACERATION PROTECTORS FOR ICE HOCKEY PLAYERS |
04/30095727 DC : DRAFT APR 2004 | EN 13832-2 - FOOTWEAR PROTECTING AGAINST CHEMICALS AND MICRO-ORGANISMS - PART 2: PROTECTION AGAINST CHEMICALS SPRAYING |
17/30353379 DC : 0 | BS EN 13158 - PROTECTIVE CLOTHING - PROTECTIVE JACKETS, BODY AND SHOULDER PROTECTORS FOR EQUESTRIAN USE, FOR HORSE RIDERS AND THOSE WORKING WITH HORSES, AND FOR HORSE DRIVERS - REQUIREMENTS AND TEST METHODS |
11/30246792 DC : 0 | BS 8468-7 - RESPIRATORY PROTECTIVE DEVICES FOR USE AGAINST CHEMICAL, BIOLOGICAL, RADIOLOGICAL AND NUCLEAR (CBRN) AGENTS - PART 7: CLOSED-CIRCUIT BREATHING APPARATUS - SPECIFICATION |
16/30341174 DC : 0 | BS EN ISO 11393-2 - PROTECTIVE CLOTHING FOR USERS OF HAND-HELD CHAIN-SAWS - PART 2: PERFORMANCE REQUIREMENTS AND TEST METHODS FOR LEG PROTECTORS |
12/30259025 DC : 0 | BS EN 50575 - POWER, CONTROL AND COMMUNICATION CABLES - CABLES FOR GENERAL APPLICATIONS IN CONSTRUCTION WORKS SUBJECT TO REACTION TO FIRE REQUIREMENTS |
12/30260499 DC : 0 | BS EN 16448-1 - PROTECTIVE CLOTHING - BODY ARMOUR - PART 1: GENERAL REQUIREMENTS |
PD CEN/TR 16149:2011 | Guidance Document for drafting CEN/TC 158 Standards |
07/30149276 DC : 0 | BS 8468-4 - RESPIRATORY PROTECTIVE DEVICES FOR USE AGAINST CHEMICAL, BIOLOGICAL, RADIOLOGICAL AND NUCLEAR (CBRN) AGENTS - PART 4: POWERED AIR-PURIFYING RESPIRATORS - SPECIFICATION |
PD CEN/TR 15419:2017 | Protective clothing. Guidelines for selection, use, care and maintenance of chemical protective clothing |
09/30203310 DC : 0 | BS EN 15090 - FOOTWEAR FOR FIREFIGHTERS |
NF EN 1149-5 : 2008 | PROTECTIVE CLOTHING - ELECTROSTATIC PROPERTIES - PART 5: MATERIAL PERFORMANCE AND DESIGN REQUIREMENTS |
DIN EN ISO 10862:2009-10 | SMALL CRAFT - QUICK RELEASE SYSTEM FOR TRAPEZE HARNESS |
15/30296820 DC : 0 | BS EN ISO 10256-3 - PROTECTIVE EQUIPMENT FOR USE IN ICE HOCKEY - PART 3: FACE PROTECTORS |
UNI EN 1127-1 : 2011 | EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY |
UNI EN 71-13 : 2014 | SAFETY OF TOYS - PART 13: OLFACTORY BOARD GAMES, COSMETIC KITS AND GUSTATIVE GAMES |
UNI EN 15649-1 : 2014 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
BS EN ISO 13287:2012 | Personal protective equipment. Footwear. Test method for slip resistance |
PREN ISO 15027-1 : DRAFT 2010 | IMMERSION SUITS - PART 1: CONSTANT WEAR SUITS, REQUIREMENTS INCLUDING SAFETY |
S.R. CEN/TR 16386:2013 | DENTISTRY - GUIDELINES FOR HANDLING METHACRYLATE-BASED MATERIALS IN THE DENTAL LABORATORY |
BS PD IEC TS 60079-32-1 : 2013 | EXPLOSIVE ATMOSPHERES - PART 32-1: ELECTROSTATIC HAZARDS, GUIDANCE |
I.S. EN 15288-2:2008 | SWIMMING POOLS - PART 2: SAFETY REQUIREMENTS FOR OPERATION |
ANSI S3.40 : 2002 | |
PREN 12276 : DRAFT 2010 | MOUNTAINEERING EQUIPMENT - FRICTIONAL ANCHORS - SAFETY REQUIREMENTS AND TEST METHODS |
I.S. EN 50496:2018 | DETERMINATION OF WORKERS' EXPOSURE TO ELECTROMAGNETIC FIELDS AND ASSESSMENT OF RISK AT A BROADCAST SITE |
PREN 353-1 : DRAFT 2012 | PERSONAL FALL PROTECTION EQUIPMENT - GUIDED TYPE FALL ARRESTERS INCLUDING AN ANCHOR LINE - PART 1: GUIDED TYPE FALL ARRESTERS INCLUDING A RIGID ANCHOR LINE |
NF EN 358 : 2000 | PERSONAL PROTECTIVE EQUIPMENT FOR WORK POSITIONING AND PREVENTION OF FALLS FROM A HEIGHT - BELTS FOR WORK POSITIONING AND RESTRAINT AND WORK POSITIONING LANYARDS |
I.S. EN 71-13:2014 | SAFETY OF TOYS - PART 13: OLFACTORY BOARD GAMES, COSMETIC KITS AND GUSTATIVE GAMES |
17/30353382 DC : 0 | BS EN 17092-1 - PROTECTIVE GARMENTS FOR MOTORCYCLE RIDERS - PART 1: TEST METHODS |
17/30359551 DC : 0 | BS EN 13832-1 - FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 1: TERMINOLOGY AND TEST METHODS |
BS EN 353-1 : 2014 | PERSONAL FALL PROTECTION EQUIPMENT - GUIDED TYPE FALL ARRESTERS INCLUDING AN ANCHOR LINE - PART 1: GUIDED TYPE FALL ARRESTERS INCLUDING A RIGID ANCHOR LINE |
BS EN ISO 10819:2013 | Mechanical vibration and shock. Hand-arm vibration. Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand |
EN 15288-2:2008 | Swimming pools - Part 2: Safety requirements for operation |
UNI EN 15288-2 : 2009 | SWIMMING POOLS - PART 2: SAFETY REQUIREMENTS FOR OPERATION |
NF EN 352-3 : 2003 | HEARING PROTECTORS - GENERAL REQUIREMENTS - PART 3: EARMUFFS ATTACHED TO AN INDUSTRIAL SAFETY HELMET |
DIN EN 12094-8:2016-06 (Draft) | FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 8: REQUIREMENTS AND TEST METHODS FOR CONNECTORS |
DIN EN 15567-2:2015-08 | SPORTS- AND RECREATIONAL FACILITIES - ROPES COURSES - PART 2: OPERATION REQUIREMENTS |
BS EN 13921:2007 | Personal protective equipment. Ergonomic principles |
BS EN 381-10:2002 | Protective clothing for users of hand-held chain saws Test method for upper body protectors |
BS EN 13594:2015 | Protective gloves for motorcycle riders. Requirements and test methods |
UNE-EN 530:2011 | Abrasion resistance of protective clothing material - Test methods |
BS EN 13087-2:2012 | Protective helmets. Test methods Shock absorption |
BS EN 14529:2005 | Respiratory protective devices. Self-contained open-circuit compressed air breathing apparatus with half mask designed to include a positive pressure lung governed demand valve for escape purposes only |
BS EN 13794:2002 | Respiratory protective devices. Self-contained closed-circuit breathing apparatus for escape. Requirements, testing, marking |
BS EN 12276:2013 | Mountaineering equipment. Frictional anchors. Safety requirements and test methods |
BS EN 1146:2005 | Respiratory protective devices. Selfcontained open-circuit compressed air breathing apparatus incorporating a hood for escape. Requirements, testing, marking |
ISO 13982-1:2004 | Protective clothing for use against solid particulates — Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing) |
BS EN 14120 : 2003 | PROTECTIVE CLOTHING - WRIST, PALM, KNEE AND ELBOW PROTECTORS FOR USERS OF ROLLER SPORTS EQUIPMENT - REQUIREMENTS AND TEST METHODS |
BS EN 402:2003 | Respiratory protective devices. Lung governed demand self-contained open-circuit compressed air breathing apparatus with full face mask or mouthpiece assembly for escape. Requirements, testing, marking |
BS EN 13087-3:2000 | Protective helmets. Test methods Resistance to penetration |
BS EN ISO 13997:1999 | Protective clothing. Mechanical properties. Determination of resistance to cutting by sharp objects |
BS EN 12568:1998 | Foot and leg protectors. Requirements and test methods for toecaps and metal penetration resistant inserts |
BS EN 381-9:1997 | Protective clothing for users of hand-held chain saws Requirements for chain saw protective gaiters |
BS EN 13274-2:2001 | Respiratory protective devices. Methods of test Practical performance tests |
BS EN 1005-1 : 2001 | SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 1: TERMS AND DEFINITIONS |
BS EN 1809 : 2014 | DIVING EQUIPMENT - BUOYANCY COMPENSATORS - FUNCTIONAL AND SAFETY REQUIREMENTS, TEST METHODS |
BS EN 169:2002 | Personal eye-protection. Filters for welding and related techniques. Transmittance requirements and recommended use |
BS EN 140:1999 | Respiratory protective devices. Half masks and quarter masks. Requirements, testing, marking |
ISO 17249:2013 | Safety footwear with resistance to chain saw cutting |
BS EN 171:2002 | Personal eye-protection. Infrared filters. Transmittance requirements and recommended use |
BS EN 12477:2001 | Protective gloves for welders |
BS EN 529:2005 | Respiratory protective devices. Recommendations for selection, use, care and maintenance. Guidance document |
BS EN 12275:2013 | Mountaineering equipment. Connectors. Safety requirements and test methods |
BS EN 381-8:1997 | Protective clothing for users of hand-held chain saws Test methods for chain saw protective gaiters |
BS EN 13277-4 : 2001 | PROTECTIVE EQUIPMENT FOR MARTIAL ARTS - PART 4: ADDITIONAL REQUIREMENTS AND TEST METHODS FOR HEAD PROTECTORS |
BS EN 14325:2004 | Protective clothing against chemicals. Test methods and performance classification of chemical protective clothing materials, seams, joins and assemblages |
BS EN 13287:2004 | Safety, protective and occupational footwear for professional use. Test method for slip resistance |
BS EN ISO 12402-6 : 2006 | PERSONAL FLOTATION DEVICES - PART 6: SPECIAL PURPOSE LIFEJACKETS AND BUOYANCY AIDS - SAFETY REQUIREMENTS AND ADDITIONAL TEST METHODS |
BS EN 13061:2009 | Protective clothing. Shin guards for association football players. Requirements and test methods |
BS EN ISO 12402-5 : 2006 | PERSONAL FLOTATION DEVICES - PART 5: BUOYANCY AIDS (LEVEL 50) - SAFETY REQUIREMENTS |
BS EN 13277-1:2000 | Protective equipment for martial arts General requirements and test methods |
BS EN 1938:2010 | Personal eye protection. Goggles for motorcycle and moped users |
BS EN ISO 12402-4 : 2006 | PERSONAL FLOTATION DEVICES - PART 4: LIFEJACKETS, PERFORMANCE LEVEL 100 - SAFETY REQUIREMENTS |
BS EN 352-1:2002 | Hearing protectors. Safety requirements and testing Ear-muffs |
BS EN 469:2014 | Protective clothing for firefighters. Performance requirements for protective clothing for firefighting |
BS EN 12841:2006 | Personal fall protection equipment. Rope access systems. Rope adjustment devices |
BS EN 355:2002 | Personal protective equipment against falls from a height. Energy absorbers |
BS EN 564:2014 | Mountaineering equipment. Accessory cord. Safety requirements and test methods |
BS EN 132:1999 | Respiratory protective devices. Definitions of terms and pictograms |
BS EN 13087-6:2012 | Protective helmets. Test methods Field of vision |
ISO 12312-2:2015 | Eye and face protection — Sunglasses and related eyewear — Part 2: Filters for direct observation of the sun |
BS EN ISO 13982-1 : 2004 | PROTECTIVE CLOTHING FOR USE AGAINST SOLID PARTICULATES - PART 1: PERFORMANCE REQUIREMENTS FOR CHEMICAL PROTECTIVE CLOTHING PROVIDING PROTECTION TO THE FULL BODY AGAINST AIRBORNE SOLID PARTICULATES (TYPE 5 CLOTHING) |
BS EN 12021:2014 | Respiratory equipment. Compressed gases for breathing apparatus |
BS EN 135:1999 | Respiratory protective devices. List of equivalent terms |
BS EN 13274-6:2002 | Respiratory protective devices. Methods of test Determination of carbon dioxide content of the inhalation air |
BS EN 403:2004 | Respiratory protective devices for self-rescue. Filtering devices with hood for escape from fire. Requirements, testing, marking |
ISO 10862:2009 | Small craft Quick release system for trapeze harness |
ISO 6530:2005 | Protective clothing — Protection against liquid chemicals — Test method for resistance of materials to penetration by liquids |
BS EN 13274-3:2001 | Respiratory protective devices. Methods of test Determination of breathing resistance |
ISO 10256:2003 | Head and face protection for use in ice hockey |
ISO 12402-3:2006 | Personal flotation devices Part 3: Lifejackets, performance level 150 Safety requirements |
ISO 12402-8:2006 | Personal flotation devices Part 8: Accessories Safety requirements and test methods |
ISO 20346:2014 | Personal protective equipment Protective footwear |
BS EN 1127-2:2014 | Explosive atmospheres. Explosion prevention and protection Basic concepts and methodology for mining |
ISO 15027-2:2012 | Immersion suits Part 2: Abandonment suits, requirements including safety |
ISO 17491-4:2008 | Protective clothing — Test methods for clothing providing protection against chemicals — Part 4: Determination of resistance to penetration by a spray of liquid (spray test) |
ISO 13287:2012 | Personal protective equipment Footwear Test method for slip resistance |
ISO 12402-4:2006 | Personal flotation devices Part 4: Lifejackets, performance level 100 Safety requirements |
BS EN 1149-2:1997 | Protective clothing. Electrostatic properties Test method for measurement of the electrical resistance through a material (vertical resistance) |
ISO 12127-2:2007 | Clothing for protection against heat and flame — Determination of contact heat transmission through protective clothing or constituent materials — Part 2: Test method using contact heat produced by dropping small cylinders |
BS EN 362:2004 | Personal protective equipment against falls from a height. Connectors |
BS EN ISO 17249:2013 | Safety footwear with resistance to chain saw cutting |
BS EN 136:1998 | Respiratory protective devices. Full face masks. Requirements, testing, marking |
ISO 22612:2005 | Clothing for protection against infectious agents Test method for resistance to dry microbial penetration |
BS EN ISO 12402-10:2006 | Personal flotation devices Selection and application of personal flotation devices and other relevant devices |
ISO 13982-2:2004 | Protective clothing for use against solid particulates — Part 2: Test method of determination of inward leakage of aerosols of fine particles into suits |
ISO 12401:2009 | Small craft — Deck safety harness and safety line — Safety requirements and test methods |
ISO 12312-1:2013 | Eye and face protection Sunglasses and related eyewear Part 1: Sunglasses for general use |
BS EN 13274-8:2002 | Respiratory protective devices. Methods of test Determination of dolomite dust clogging |
BS EN 531:1995 | Protective clothing for workers exposed to heat |
BS EN 1149-1:2006 | Protective clothing. Electrostatic properties Test method for measurement of surface resistivity |
BS EN 207:2017 | Personal eye-protection equipment. Filters and eye-protectors against laser radiation (laser eye-protectors) |
BS EN 405 : 2002 | RESPIRATORY PROTECTIVE DEVICES - VALVED FILTERING HALF MASKS TO PROTECT AGAINST GASES OR GASES AND PARTICLES - REQUIREMENTS, TESTING, MARKING |
BS EN 352-6:2002 | Hearing protectors. Safety requirements and testing Ear-muffs with electrical audio input |
BS EN 145:1998 | Respiratory protective devices. Self-contained closed-circuit breathing apparatus compressed oxygen or compressed oxygen-nitrogen type. Requirements, testing, marking |
BS EN 943-1:2015+A1:2019 | Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols Performance requirements for Type 1 (gas-tight) chemical protective suits |
BS EN 167:2002 | Personal eye protection. Optical test methods |
BS EN ISO 13998:2003 | Protective clothing. Aprons, trousers and vests protecting against cuts and stabs by hand knives |
ISO 10256-1:2016 | Protective equipment for use in ice hockey — Part 1: General requirements |
ISO 15027-1:2012 | Immersion suits Part 1: Constant wear suits, requirements including safety |
BS EN 13087-7:2000 | Protective helmets. Test methods Flame resistance |
UNE-EN 71-4:2013 | Safety of toys - Part 4: Experimental sets for chemistry and related activities |
ISO 15025:2016 | Protective clothing Protection against flame Method of test for limited flame spread |
BS EN ISO 15027-1:2012 | Immersion suits Constant wear suits, requirements including safety |
BS EN 15090:2012 | Footwear for firefighters |
BS EN 379 : 2003 | PERSONAL EYE-PROTECTION - AUTOMATIC WELDING FILTERS |
BS EN 1077:2007 | Helmets for alpine skiers and snowboarders |
BS EN 1073-2:2002 | Protective clothing against radioactive contamination Requirements and test methods for non-ventilated protective clothing against particulate radioactive contamination |
BS EN 13277-3:2013 | Protective equipment for martial arts Additional requirements and test methods for trunk protectors |
BS EN ISO 12402-2 : 2006 | PERSONAL FLOTATION DEVICES - PART 2: LIFEJACKETS, PERFORMANCE LEVEL 275 - SAFETY REQUIREMENTS |
BS EN ISO 15025:2016 | Protective clothing. Protection against flame. Method of test for limited flame spread |
BS EN 12278:2007 | Mountaineering equipment. Pulleys. Safety requirements and test methods |
BS EN 14052 : 2012 | HIGH PERFORMANCE INDUSTRIAL HELMETS |
BS EN 12941 : 1999 | RESPIRATORY PROTECTIVE DEVICES - POWERED FILTERING DEVICES INCORPORATING A HELMET OR A HOOD - REQUIREMENTS, TESTING, MARKING |
I.S. EN 15567-1:2015 | SPORTS AND RECREATIONAL FACILITIES - ROPES COURSES - PART 1: CONSTRUCTION AND SAFETY REQUIREMENTS |
BS EN 13087-10:2012 | Protective helmets. Test methods Resistance to radiant heat |
BS EN 13595-3:2002 | Protective clothing for professional motorcycle riders. Jackets, trousers and one piece or divided suits Test method for determination of burst strength |
BS EN ISO 14460:1999 | Protective clothing for automobile racing drivers. Protection against heat and flame. Performance requirements and test methods |
BS EN 13595-4:2002 | Protective clothing for professional motorcycle riders. Jackets, trousers and one piece or divided suits Test methods for the determination of impact cut resistance |
BS EN 144-3:2003 | Respiratory protective devices. Gas cylinder valves Outlet connections for diving gases Nitrox and oxygen |
BS EN 174:2001 | Personal eye-protection. Ski goggles for downhill skiing |
ISO 12402-6:2006 | Personal flotation devices Part 6: Special purpose lifejackets and buoyancy aids Safety requirements and additional test methods |
BS EN 381-11:2002 | Protective clothing for users of hand-held chain saws Requirements for upper body protectors |
ISO 374-5:2016 | Protective gloves against dangerous chemicals and micro-organisms — Part 5: Terminology and performance requirements for micro-organisms risks |
BS EN 148-2:1999 | Respiratory protective devices: threads for facepieces Centre thread connection |
BS EN 566:2017 | Mountaineering equipment. Slings. Safety requirements and test methods |
EN 353-2:2002 | Personal protective equipment against falls from a height - Part 2: Guided type fall arresters including a flexible anchor line |
EN 1497:2007 | Personal fall protection equipment - Rescue harnesses |
EN ISO 10256:2003 | Head and face protection for use in ice hockey (ISO 10256:2003) |
EN 15151-1:2012 | Mountaineering equipment - Braking devices - Part 1: Braking devices with manually assisted locking, safety requirements and test methods |
EN 170:2002 | Personal eye-protection - Ultraviolet filters - Transmittance requirements and recommended use |
EN 207:2017 | Personal eye-protection equipment - Filters and eye-protectors against laser radiation (laser eye-protectors) |
EN 403:2004 | Respiratory protective devices for self-rescue - Filtering devices with hood for escape from fire - Requirements, testing, marking |
EN 15567-2:2015 | Sports- and recreational facilities - Ropes courses - Part 2: Operation requirements |
EN 1938:2010 | Personal eye protection - Goggles for motorcycle and moped users |
EN 13595-3:2002 | Protective clothing for professional motorcycle riders - Jackets, trousers and one-piece or divided suits - Part 3: Test method for determination of burst strength |
EN 14120:2003+A1:2007 | Protective clothing - Wrist, palm, knee and elbow protectors for users of roller sports equipment - Requirements and test methods |
EN 14529:2005 | Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with half mask designed to include a positive pressure lung governed demand valve for escape purposes only |
EN 16350:2014 | Protective gloves - Electrostatic properties |
EN 13594:2015 | Protective gloves for motorcycle riders - Requirements and test methods |
EN 361:2002 | Personal protective equipment against falls from a height - Full body harnesses |
EN ISO 22612:2005 | Clothing for protection against infectious agents - Test method for resistance to dry microbial penetration (ISO 22612:2005) |
EN 402:2003 | Respiratory protective devices - Lung governed demand self-contained open-circuit compressed air breathing apparatus with full face mask or mouthpiece assembly for escape - Requirements, testing, marking |
EN ISO 14877:2002 | Protective clothing for abrasive blasting operations using granular abrasives (ISO 14877:2002) |
EN 14021:2003 | Stone shields for off-road motorcycling suited to protect riders against stones and debris - Requirements and test methods |
EN 13795:2011+A1:2013 | Surgical drapes, gowns and clean air suits, used as medical devices for patients, clinical staff and equipment - General requirements for manufacturers, processors and products, test methods, performance requirements and performance levels |
EN 1827:1999+A1:2009 | Respiratory protective devices - Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only - Requirements, testing, marking |
EN 16805:2015 | Diving equipment - Diving mask - Requirements and test methods |
EN 15333-2:2009 | Respiratory equipment - Open-circuit umbilical supplied compressed gas diving apparatus - Part 2: Free flow apparatus |
EN 16716:2017 | Mountaineering equipment - Avalanche airbag systems - Safety requirements and test methods |
EN 15090:2012 | Footwear for firefighters |
EN 13921:2007 | Personal protective equipment - Ergonomic principles |
EN 397:2012+A1:2012 | Industrial safety helmets |
EN ISO 15027-1:2012 | Immersion suits - Part 1: Constant wear suits, requirements including safety (ISO 15027-1:2012) |
EN 14605:2005+A1:2009 | Protective clothing against liquid chemicals - performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4]) |
EN 14435:2004 | Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with half mask designed to be used with positive pressure only - Requirements, testing, marking |
EN ISO 12311 : 2013 COR 2014 | PERSONAL PROTECTIVE EQUIPMENT - TEST METHODS FOR SUNGLASSES AND RELATED EYEWEAR (ISO 12311:2013, CORRECTED VERSION 2014-08-15) |
EN ISO 11612:2015 | Protective clothing - Clothing to protect against heat and flame - Minimum performance requirements (ISO 11612:2015) |
EN 16473:2014 | Firefighters helmets - Helmets for technical rescue |
EN ISO 6530:2005 | Protective clothing - Protection against liquid chemicals - Test method for resistance of materials to penetration by liquids (ISO 6530:2005) |
EN 175:1997 | Personal protection - Equipment for eye and face protection during welding and allied processes |
EN ISO 13998:2003 | Protective clothing - Aprons, trousers and vests protecting against cuts and stabs by hand knives (ISO 13998:2003) |
EN 15649-1:2009+A2:2013 | Floating leisure articles for use on and in the water - Part 1: Classification, materials, general requirements and test methods |
EN 13595-1:2002 | Protective clothing for professional motorcycle riders - Jackets, trousers and one piece or divided suits - Part 1: General requirements |
EN 250:2014 | Respiratory equipment - Open-circuit self-contained compressed air diving apparatus - Requirements, testing and marking |
EN ISO 12127-2:2007 | Clothing for protection against heat and flame - Determination of contact heat transmission through protective clothing or constituent materials - Part 2: Test method using contact heat produced by dropping small cylinders (ISO 12127-2:2007) |
EN ISO 20346:2014 | Personal protective equipment - Protective footwear (ISO 20346:2014) |
EN 14360:2004 | Protective clothing against rain - Test method for ready made garments - Impact from above with high energy droplets |
EN 1486:2007 | Protective clothing for fire-fighters - Test methods and requirements for reflective clothing for specialised fire-fighting |
EN 169:2002 | Personal eye-protection - Filters for welding and related techniques - Transmittance requirements and recommended use |
EN 1621-1:2012 | Motorcyclists' protective clothing against mechanical impact - Part 1: Motorcyclists' limb joint impact protectors - Requirements and test methods |
EN 360:2002 | Personal protective equipment against falls from a height - Retractable type fall arresters |
EN 379:2003+A1:2009 | Personal eye-protection - Automatic welding filters |
EN 564:2014 | Mountaineering equipment - Accessory cord - Safety requirements and test methods |
EN ISO 15027-2:2012 | Immersion suits - Part 2: Abandonment suits, requirements including safety (ISO 15027-2:2012) |
EN ISO 20349:2010 | Personal protective equipment - Footwear protecting against thermal risks and molten metal splashes as found in foundries and welding - Requirements and test method (ISO 20349:2010) |
EN 13595-4:2002 | Protective clothing for professional motorcycle riders - Jackets, trousers and one-piece or divided suits - Part 4: Test method for determination of impact cut resistance |
EN 14052:2012+A1:2012 | High performance industrial helmets |
EN 566:2017 | Mountaineering equipment - Slings - Safety requirements and test methods |
EN ISO 15025:2016 | Protective clothing - Protection against flame - Method of test for limited flame spread (ISO 15025:2016) |
EN 421:2010 | Protective gloves against ionizing radiation and radioactive contamination |
EN 374-1:2003 | Protective gloves against chemicals and micro-organisms - Part 1: Terminology and performance requirements |
EN 13781:2012 | Protective helmets for drivers and passengers of snowmobiles and bobsleighs |
EN 13641:2002 | Elimination or reduction of risk of infection related to in vitro diagnostic reagents |
EN ISO 20347:2012 | Personal protective equipment - Occupational footwear (ISO 20347:2012) |
EN 14225-4:2005 | Diving suits - Part 4: One atmosphere suits (ADS) - Human factors requirements and test methods |
EN 13595-2:2002 | Protective clothing for professional motorcycle riders - Jackets, trousers and one-piece or divided suits - Part 2: Test method for determination of impact abrasion resistance |
EN 16471:2014 | Firefighters helmets - Helmets for wildland fire fighting |
EN 13795-3:2006+A1:2009 | Surgical drapes, gowns and clean air suits, used as medical devices for patients, clinical staff and equipment - Part 3: Performance requirements and performance levels |
EN 943-1:2015 | Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols - Part 1: Performance requirements for Type 1 (gas-tight) chemical protective suits |
EN 966:2012+A1:2012 | Helmets for airborne sports |
EN 958:2017 | Mountaineering equipment - Energy absorbing systems for use in klettersteig (via ferrata) climbing - Safety requirements and test methods |
EN 471:2003+A1:2007 | High-visibility warning clothing for professional use - Test methods and requirements |
EN 1621-4:2013 | Motorcyclists' protective clothing against mechanical impact - Part 4: Motorcyclists' inflatable protectors - Requirements and test methods |
EN 1809:2014+A1:2016 | Diving equipment - Buoyancy compensators - Functional and safety requirements, test methods |
EN 354:2010 | Personal fall protection equipment - Lanyards |
EN ISO 10862:2009 | Small craft - Quick release system for trapeze harness (ISO 10862:2009) |
EN 340:2003 | Protective clothing - General requirements |
EN ISO 13982-2:2004 | Protective clothing for use against solid particulates - Part 2: Test method of determination of inward leakage of aerosols of fine particles into suits (ISO 13982-2:2004) |
EN ISO 12127-1:2015 | Clothing for protection against heat and flame - Determination of contact heat transmission through protective clothing or constituent materials - Part 1: Contact heat produced by heating cylinder (ISO 12127-1:2015) |
EN 1385:2012 | Helmets for canoeing and white water sports |
EN 14404:2004+A1:2010 | Personal protective equipment - Knee protectors for work in the kneeling position |
EN 1731:2006 | Personal eye protection - Mesh eye and face protectors |
EN 893:2010 | Mountaineering equipment - Crampons - Safety requirements and test methods |
EN 149:2001+A1:2009 | Respiratory protective devices - Filtering half masks to protect against particles - Requirements, testing, marking |
11/30199139 DC : 0 | BS EN ISO 13688 - PROTECTIVE CLOTHING - GENERAL REQUIREMENTS |
13/30287913 DC : 0 | BS 7971-10 - PROTECTIVE CLOTHING AND EQUIPMENT FOR USE IN VIOLENT SITUATIONS AND IN TRAINING - PART 10: COVERALLS - REQUIREMENTS AND TEST METHODS |
00/565765 DC : DRAFT DEC 2000 | BS EN ISO 17250 - SAFETY FOOTWEAR WITH RESISTANCE TO FIRE-FIGHTING HAZARDS |
BS PAS 028(2002) : 2002 | MARINE SAFETY HELMETS |
12/30268675 DC : 0 | BS EN 958 - MOUNTAINEERING EQUIPMENT - ENERGY ABSORBING SYSTEMS FOR USE IN KLETTERSTEIG (VIA FERRATA) CLIMBING - SAFETY REQUIREMENTS AND TEST METHODS |
PREN 12270 : DRAFT 2011 | MOUNTAINEERING EQUIPMENT - CHOCKS - SAFETY REQUIREMENTS AND TEST METHODS |
PREN 568 : DRAFT 2014 | MOUNTAINEERING EQUIPMENT - ICE ANCHORS - SAFETY REQUIREMENTS AND TEST METHODS |
EN 71-13:2014 | Safety of toys - Part 13: Olfactory board games, cosmetic kits and gustative games |
16/30338531 DC : 0 | BS EN 144-1 - RESPIRATORY PROTECTIVE DEVICES - GAS CYLINDER VALVES - PART 1: INLET CONNECTIONS |
PREN 1073-1 : DRAFT 2013 | PROTECTIVE CLOTHING AGAINST RADIOACTIVE CONTAMINATION - PART 1: REQUIREMENTS AND TEST METHODS FOR VENTILATED PROTECTIVE CLOTHING AGAINST PARTICULATE RADIOACTIVE CONTAMINATION |
17/30353385 DC : 0 | BS EN 17092-2 - PROTECTIVE GARMENTS FOR MOTORCYCLE RIDERS - PART 2: HEAVY-DUTY PROTECTIVE GARMENTS - REQUIREMENTS |
BS 8468-3.2:2009 | Respiratory protective devices for use against chemical, biological, radiological and nuclear (CBRN) agents Air-purifying devices incorporating a hood for escape. Specification |
11/30212883 DC : 0 | BS EN ISO 10819 - MECHANICAL VIBRATION AND SHOCK - HAND-ARM VIBRATION - METHOD FOR THE MEASUREMENT AND EVALUATION OF THE VIBRATION TRANSMISSIBILITY OF GLOVES AT THE PALM OF THE HAND |
PREN 71-4 : DRAFT 2011 | SAFETY OF TOYS - PART 4: EXPERIMENTAL SETS FOR CHEMISTRY AND RELATED ACTIVITIES |
DIN EN 16716:2015-08 (Draft) | MOUNTAINEERING EQUIPMENT - AVALANCHE AIRBAG SYSTEMS - SAFETY REQUIREMENTS AND TEST METHODS |
99/566215 DC : DRAFT NOV 1999 | PREN ISO 14876-1 - PROTECTIVE CLOTHING - BODY ARMOUR - PART 1: GENERAL REQUIREMENTS |
09/30194709 DC : 0 | BS 10999 - SPECIFICATION FOR DISTRESS SIGNAL UNITS FOR THE FIRE AND RESCUE SERVICE |
BS 7971-2:2003 | Protective clothing and equipment for use in violent situations and in training Guidance on risk assessment and on the selection, use, cleaning and maintenance of protective clothing and equipment |
BS 8468-6.2:2011 | Respiratory protective devices for use against chemical, biological, radiological and nuclear (CBRN) agents Constant flow compressed airline equipment. Specification |
16/30341190 DC : 0 | BS EN ISO 11393-6 - PROTECTIVE CLOTHING FOR USERS OF HAND-HELD CHAIN-SAWS - PART 6: TEST METHODS AND PERFORMANCE REQUIREMENTS FOR UPPER BODY PROTECTORS |
PREN 1149-5 : DRAFT 2016 | PROTECTIVE CLOTHING - ELECTROSTATIC PROPERTIES - PART 5: MATERIAL PERFORMANCE AND DESIGN REQUIREMENTS |
BS EN ISO 12311:2013 | Personal protective equipment. Test methods for sunglasses and related eyewear |
PREN 567 : DRAFT 2011 | MOUNTAINEERING EQUIPMENT - ROPE CLAMPS - SAFETY REQUIREMENTS AND TEST METHODS |
BS 8468-6.1:2011 | Respiratory protective devices for use against chemical, biological, radiological and nuclear (CBRN) agents Positive-pressure compressed airline equipment. Specification |
PREN 12277 : DRAFT 2014 | MOUNTAINEERING EQUIPMENT - HARNESSES - SAFETY REQUIREMENTS AND TEST METHODS |
14/30282553 DC : 0 | BS EN ISO 13506-1 - PROTECTIVE CLOTHING AGAINST HEAT AND FLAME - PART 1: TEST METHOD FOR COMPLETE GARMENTS - MEASUREMENT OF TRANSFERRED ENERGY USING AN INSTRUMENTED MANIKIN |
CEI EN 50496 : 2010 | DETERMINATION OF WORKERS' EXPOSURE TO ELECTROMAGNETIC FIELDS AND ASSESSMENT OF RISK AT A BROADCAST SITE |
14/30304768 DC : 0 | BS EN 566 - MOUNTAINEERING EQUIPMENT - SLINGS - SAFETY REQUIREMENTS AND TEST METHODS |
14/30301155 DC : 0 | BS EN 12277 - MOUNTAINEERING EQUIPMENT - HARNESSES - SAFETY REQUIREMENTS AND TEST METHODS |
00/565179 DC : 0 | BS EN ISO 11611 - PROTECTIVE CLOTHING FOR USE IN WELDING AND ALLIED PROCESSES |
BS EN 71-13:2014 | Safety of toys Olfactory board games, cosmetic kits and gustative games |
BS EN 16471:2014 | Firefighters helmets. Helmets for wildland fire fighting |
PREN 14225-3 : DRAFT 2014 | DIVING SUITS - PART 3: ACTIVELY HEATED OR COOLED SUIT SYSTEMS AND COMPONENTS - REQUIREMENTS AND TEST METHODS |
NF EN 352-8 : 2008 | HEARING PROTECTORS - SAFETY REQUIREMENTS AND TESTING - PART 8: ENTERTAINMENT AUDIO EAR-MUFFS |
14/30304651 DC : 0 | BS EN ISO 20349-2 - FOOTWEAR PROTECTING AGAINST RISKS IN FOUNDRIES AND WELDING - PART 2: REQUIREMENTS AND TEST METHODS FOR PROTECTION AGAINST RISKS IN WELDING AND ALLIED PROCESSES |
16/30288107 DC : 0 | BS 7971-6 - PROTECTIVE CLOTHING AND EQUIPMENT FOR USE IN VIOLENT SITUATIONS AND IN TRAINING - PART 6: GLOVES - REQUIREMENTS AND TEST METHODS |
NF EN 14225-2 : 2005 | DIVING SUITS - PART 2: DRY SUITS - REQUIREMENTS AND TEST METHODS |
PREN 207 : DRAFT 2016 | PERSONAL EYE-PROTECTION EQUIPMENT - FILTERS AND EYE-PROTECTORS AGAINST LASER RADIATION (LASER EYE-PROTECTORS) |
09/30207442 DC : 0 | BS EN 16027 - PROTECTIVE CLOTHING - GLOVES WITH PROTECTIVE EFFECT FOR ASSOCIATION FOOTBALL GOAL KEEPERS |
09/30192714 DC : 0 | BS EN 795 - PERSONAL FALL PROTECTION EQUIPMENT - ANCHOR DEVICES |
BS 7985:2002 | Code of Practice for the use of rope access methods for industrial purposes |
BS 8468-7:2012 | Respiratory protective devices for use against chemical, biological, radiological and nuclear (CBRN) agents Closed-circuit breathing apparatus. Specification |
11/30235966 DC : DRAFT MAY 2011 | BS EN ISO 12127-1 - PROTECTIVE CLOTHING - PROTECTION AGAINST HEAT AND FLAME - TEST METHOD: DETERMINATION OF THE CONTACT HEAT TRANSMISSION THROUGH PROTECTIVE CLOTHING OR ITS MATERIALS - PART 1: CONTACT HEAT PRODUCED BY HEATING CYLINDER |
11/30229088 DC : 0 | BS 5655-6 - LIFTS AND SERVICE LIFTS - PART 6: CODE OF PRACTICE FOR THE SELECTION AND INSTALLATION OF NEW LIFTS |
NF EN ISO 12401 : 2009 | SMALL CRAFT - DECK SAFETY HARNESS AND SAFETY LINE - SAFETY REQUIREMENTS AND TEST METHODS |
PREN ISO 15027-2 : DRAFT 2010 | IMMERSION SUITS - PART 2: ABANDONMENT SUITS, REQUIREMENTS INCLUDING SAFETY |
07/30160485 DC : 0 | BS EN 13061 - PROTECTIVE CLOTHING - SHIN GUARDS FOR ASSOCIATION FOOTBALL PLAYERS - REQUIREMENTS AND TEST METHODS |
06/30148736 DC : 0 | EN 13138-1 - BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR BUOYANT AIDS TO BE WORN |
BS 8437(2005) : 2005 | CODE OF PRACTICE FOR SELECTION, USE AND MAINTENANCE OF PERSONAL FALL PROTECTION SYSTEMS AND EQUIPMENT FOR USE IN THE WORKPLACE |
BS EN 13795:2011+A1:2013 | Surgical drapes, gowns and clean air suits, used as medical devices for patients, clinical staff and equipment. General requirements for manufacturers, processors and products, test methods, performance requirements and performance levels |
I.S. EN 16716:2017 | MOUNTAINEERING EQUIPMENT - AVALANCHE AIRBAG SYSTEMS - SAFETY REQUIREMENTS AND TEST METHODS |
BS EN 1073-1 : 2016 | PROTECTIVE CLOTHING AGAINST SOLID AIRBORNE PARTICLES INCLUDING RADIOACTIVE CONTAMINATION - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPRESSED AIR LINE VENTILATED PROTECTIVE CLOTHING, PROTECTING THE BODY AND THE RESPIRATORY TRACT |
PREN 1127-2 : DRAFT 2012 | EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING |
I.S. EN 15649-1:2009 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
I.S. CEN TR 15321:2006 | GUIDELINES ON THE SELECTION, USE, CARE AND MAINTENANCE OF PROTECTIVE CLOTHING |
16/30332882 DC : 0 | BS EN 360 - PERSONAL PROTECTIVE EQUIPMENT AGAINST FALLS FROM A HEIGHT - RETRACTABLE TYPE FALL ARRESTERS |
NF EN 14225-3 : 2005 | DIVING SUITS - PART 3: ACTIVELY HEATED OR COOLED SUIT (SYSTEMS) - REQUIREMENTS AND TEST METHODS |
PREN 15090 : DRAFT 2009 | FOOTWEAR FOR FIREFIGHTERS |
BS EN 1127-1:2011 | Explosive atmospheres. Explosion prevention and protection Basic concepts and methodology |
CLC/TR 60079-32-1:2015 | Explosive atmospheres - Part 32-1: Electrostatic Hazards - Guidance |
BS EN 943-2:2002 | Protective clothing against liquid and gaseous chemicals, aerosols and solid particles Performance requirements for \'gas-tight\' (Type 1) chemical protective suits for emergency teams (ET) |
EN ISO 25649-1:2017 | Floating leisure articles for use on and in the water - Part 1: Classification, materials, general requirements and test methods (ISO 25649-1:2017) |
EN 1149-5:2008 | Protective clothing - Electrostatic properties - Part 5: Material performance and design requirements |
CEN/TR 14560:2003 | Guidance for selection, use, care and maintenance of protective clothing against heat and flame |
NF EN 143 : 2000 AMD 1 2006 | RESPIRATORY PROTECTIVE DEVICES - PARTICLE FILTERS - REQUIREMENTS, TESTING, MARKING |
NF EN 13274-2 : 2001 | RESPIRATORY PROTECTIVE DEVICES - METHODS OF TEST - PART 2: PRACTICAL PERFORMANCE TESTS |
BS EN 13795-1 : 2002 | SURGICAL DRAPES, GOWNS AND CLEAN AIR SUITS, USED AS MEDICAL DEVICES, FOR PATIENTS, CLINICAL STAFF AND EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR MANUFACTURERS, PROCESSORS AND PRODUCTS |
BS EN 352-2:2002 | Hearing protectors. Safety requirements and testing Ear-plugs |
ISO 12402-5:2006 | Personal flotation devices Part 5: Buoyancy aids (level 50) Safety requirements |
BS EN 13089 : 2011 | MOUNTAINEERING EQUIPMENT - ICE-TOOLS - SAFETY REQUIREMENTS AND TEST METHODS |
BS EN 14435:2004 | Respiratory protective devices. Self-contained open-circuit compressed air breathing apparatus with half mask designed to be used with positive pressure only. Requirements, testing, marking |
ISO 20347:2012 | Personal protective equipment Occupational footwear |
BS EN 14387 : 2004 | RESPIRATORY PROTECTIVE DEVICES - GAS FILTER(S) AND COMBINED FILTER(S) - REQUIREMENTS, TESTING, MARKING |
ISO 13688:2013 | Protective clothing — General requirements |
BS EN ISO 6942:2002 | Protective clothing. Protection against heat and fire. Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat |
BS EN 149 : 2001 | RESPIRATORY PROTECTIVE DEVICES - FILTERING HALF MASKS TO PROTECT AGAINST PARTICLES - REQUIREMENTS, TESTING, MARKING |
BS EN 137:2006 | Respiratory protective devices. Self-contained open-circuit compressed air breathing apparatus with full face mask. Requirements, testing, marking |
BS EN 13087-1:2000 | Protective helmets. Test methods Conditions and conditioning |
BS EN 1486:2007 | Protective clothing for fire-fighters. Test methods and requirements for reflective clothing for specialized fire-fighting |
BS EN ISO 14877:2002 | Protective clothing for abrasive blasting operations using granular abrasives |
BS EN ISO 12402-8 : 2006 | PERSONAL FLOTATION DEVICES - PART 8: ACCESSORIES - SAFETY REQUIREMENTS AND TEST METHODS |
BS EN ISO 20347:2012 | Personal protective equipment. Occupational footwear |
BS EN 352-7:2002 | Hearing protectors. Safety requirements and testing Level-dependent ear-plugs |
BS EN 365:2004 | Personal protective equipment against falls from a height. General requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging |
BS EN ISO 6530:2005 | Protective clothing. Protection agaist liquid chemicals. Test method for resistance of materials to penetration by liquids |
BS EN 381-4:1999 | Protective clothing for users of hand-held chain saws Test methods for chainsaw protective gloves |
BS EN 12942 : 1999 | RESPIRATORY PROTECTIVE DEVICES - POWER ASSISTED FILTERING DEVICES INCORPORATING FULL FACE MASKS, HALF MASKS OR QUARTER MASKS - REQUIREMENTS, TESTING, MARKING |
BS EN ISO 13995:2001 | Protective clothing. Mechanical properties. Test method for the determination of the resistance to puncture and dynamic tearing of materials |
BS EN 148-3:1999 | Respiratory protective devices: threads for facepieces Thread connection M 45 x 3 |
BS EN 1731:2006 | Personal eye protection. Mesh eye and face protectors |
BS EN 1827 : 1999 | RESPIRATORY PROTECTIVE DEVICES - HALF MASKS WITHOUT INHALATION VALVES AND WITH SEPARABLE FILTERS TO PROTECT AGAINST GASES OR GASES AND PARTICLES OR PARTICLES ONLY - REQUIREMENTS, TESTING, MARKING |
BS EN 13546 : 2002 | PROTECTIVE CLOTHING - HAND, ARM, CHEST, ABDOMEN, LEG, FOOT AND GENITAL PROTECTORS FOR FIELD HOCKEY GOAL KEEPERS AND SHIN PROTECTORS FOR FIELD PLAYERS - REQUIREMENTS AND TEST METHODS |
BS EN 1891:1998 | Personal protective equipment for the prevention of falls from a height. Low stretch kernmantel ropes |
BS EN ISO 15027-2:2012 | Immersion suits Abandonment suits, requirements including safety |
BS EN ISO 22612:2005 | Clothing for protection against infectious agents. Test method for resistance to dry microbial penetration |
BS EN 13795-3 : 2006 | SURGICAL DRAPES, GOWNS AND CLEAN AIR SUITS, USED AS MEDICAL DEVICES FOR PATIENTS, CLINICAL STAFF AND EQUIPMENT - PART 3: PERFORMANCE REQUIREMENTS AND PERFORMANCE LEVELS |
BS EN 1095:1998 | Deck safety harness and safety line for use on recreational craft. Safety requirements and test methods |
ISO 12402-10:2006 | Personal flotation devices Part 10: Selection and application of personal flotation devices and other relevant devices |
DIN EN 16716:2017-05 | MOUNTAINEERING EQUIPMENT - AVALANCHE AIRBAG SYSTEMS - SAFETY REQUIREMENTS AND TEST METHODS |
EN 13061:2009 | Protective clothing - Shin guards for association football players - Requirements and test methods |
EN 13484:2012 | Helmets for users of luges |
EN 12492:2012 | Mountaineering equipment - Helmets for mountaineers - Safety requirements and test methods |
EN 1127-2:2014 | Explosive atmospheres - Explosion prevention and protection - Part 2: Basic concepts and methodology for mining |
EN 13274-6:2001 | Respiratory protective devices - Methods of test - Part 6: Determination of carbon dioxide content of the inhalation air |
EN 13287:2004 | Personal protective equipment - Footwear - Test method for slip resistance |
DIN EN 15567-1:2015-08 | SPORTS AND RECREATIONAL FACILITIES - ROPES COURSES - PART 1: CONSTRUCTION AND SAFETY REQUIREMENTS |
EN 1149-2:1997 | Protective clothing - Electrostatic properties - Part 2: Test method for measurement of the electrical resistance through a material (vertical resistance) |
EN 529:2005 | Respiratory protective devices - Recommendations for selection, use, care and maintenance - Guidance document |
CEN/TR 16149:2011 | Guidance Document for drafting CEN/TC 158 Standards |
CEN/TR 15321:2006 | Guidelines on the selection, use, care and maintenance of protective clothing |
CEN/TR 16386:2013 | Dentistry - Guidelines for handling methacrylate-based materials in the dental laboratory |
EN 13087-4:2012 | Protective helmets - Test methods - Part 4: Retention system effectiveness |
EN 12568:2010 | Foot and leg protectors - Requirements and test methods for toecaps and penetration resistant inserts |
EN 1127-1:2011 | Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology |
EN 12276:2013 | Mountaineering equipment - Frictional anchors - Safety requirements and test methods |
EN 12270:2013 | Mountaineering equipment - Chocks - Safety requirements and test methods |
DIN EN 529:2006-01 | Respiratory protective devices - Recommendations for selection, use, care and maintenance - Guidance document |
DIN EN ISO 10256-1:2017-05 | PROTECTIVE EQUIPMENT FOR USE IN ICE HOCKEY - PART 1: GENERAL REQUIREMENTS (ISO 10256-1:2016) |
EN 1149-1:2006 | Protective clothing - Electrostatic properties - Part 1: Test method for measurement of surface resistivity |
EN 12841:2006 | Personal fall protection equipment - Rope access systems - Rope adjustment devices |
EN 1073-2:2002 | Protective clothing against radioactive contamination - Part 2: Requirements and test methods for non-ventilated protective clothing against particulate radioactive contamination |
EN 13277-3:2013 | Protective equipment for martial arts - Part 3: Additional requirements and test methods for trunk protectors |
EN 13274-8:2002 | Respiratory protective devices - Methods of test - Part 8: Determination of dolomite dust clogging |
EN ISO 13688:2013 | Protective clothing - General requirements (ISO 13688:2013) |
NF EN 381-11 : 2003 | PROTECTIVE CLOTHING FOR USERS OF HAND-HELD CHAINSAWS - PART 11: REQUIREMENTS FOR UPPER BODY PROTECTORS |
EN 13277-7:2009 | Protective equipment for martial arts - Part 7: Additional requirements and test methods for hand and foot protectors |
DIN EN 13921:2007-08 | Personal protective equipment - Ergonomic principles |
EN 60903 : 2003 COR 2005 | LIVE WORKING - GLOVES OF INSULATING MATERIAL |
EN 50496:2018 | Determination of workers' exposure to electromagnetic fields and assessment of risk at a broadcast site |
DIN EN 14360:2004-09 | Protective clothing against rain - Test method for ready made garments - Impact from above with high energy droplets |
NF EN 14404 : 2005 + A1 2010 | PERSONAL PROTECTIVE EQUIPMENT - KNEE PROTECTORS FOR WORK IN THE KNEELING POSITION |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.