17/30349925 DC : 0
NA
Status of Standard is Unknown
BS EN 14825 - AIR CONDITIONERS, LIQUID CHILLING PACKAGES AND HEAT PUMPS, WITH ELECTRICALLY DRIVEN COMPRESSORS, FOR SPACE HEATING AND COOLING - TESTING AND RATING AT PART LOAD CONDITIONS AND CALCULATION OF SEASONAL PERFORMANCE
Hardcopy , PDF
English
European foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions, symbols,
abbreviated terms and units
4 Part load conditions for space
cooling
5 Calculation methods for seasonal
space cooling efficiency eta[s,c,] SEER
and SEER[on]
6 Part load conditions for space heating
7 Test methods for hybrid heat pumps
8 Calculation methods for seasonal
space heating efficiency eta[s,h,] SCOP,
SCOP[on] and SCOP[net]
9 Part load conditions for process cooling
10 Calculation method for SEPR
11 Test methods for testing capacities,
EER[bin] and COP[bin] values during
active mode at part load conditions
12 Test methods for electric power input
during thermostat-off mode, standby
mode and crankcase heater mode and
off mode
13 Test report
14 Technical data sheet
Annex A (normative) - Applicable climate
bins and hours for air conditioners with
rated capacity of <= 12 kW for cooling, or
heating if the product has no cooling function
Annex B (normative) - Applicable climate bins
and hours for air/water(brine)/DX-to-water(brine)
heatpumps with a rated heat output <= 400kW
Annex C (normative) - Applicable climate bins
and hours for process chillers
Annex D (normative) - Applicable climate bins
and hours for airtoair units > 12 kW,
water(brine)-to-air units and comfort chillers
Annex E (normative) - Templates for technical
data sheets
Annex F (informative) - Determination of
water(brine) temperature for fixed capacity
units with variable outlet temperature
Annex G (informative) - Calculation example for
SEER[on] and SEER - Application to a reversible
air-to-air unit with variable capacity
Annex H (informative) - Calculation example for
SCOP[on] and SCOP[net] - Application to a fixed
capacity air-to-water(brine) heat pump used for
low temperature application
Annex I - void
Annex J (informative) - Calculation example for
SCOP[on] and SCOP[net] - Application to a fixed
capacity brine-to-water(brine) heat pump used
for medium temperature application
Annex K (informative) - Calculation example for
SCOP[on] for variable speed hybrid heat pump
based on heat pump and boiler separated tests
Annex L (informative) - Calculation example for
SEPR - Application to a process chiller with
variable capacity
Annex M (informative) - Compensation methods
for air-to-water(brine) and water(brine)-to-water
(brine) units
Annex N (normative) - Rating of outdoor units of
multi-split air conditioners and heat pumps
Annex ZA (informative) - Relationship between
this European Standard and the ecodesign
requirements of Commission Regulation
(EU) No 206/2012 aimed to be covered
Annex ZB (informative) - Relationship between
this European Standard and the ecodesign
requirements of Commission Regulation (EU)
No 813/2013 aimed to be covered
Annex ZC (informative) - Relationship between this
European Standard and the energy labelling
requirements of Commission Delegated Regulation
(EU) No 811/2013 aimed to be covered
Annex ZD (informative) - Relationship between this
European Standard and the ecodesign requirements
of Commission Regulation (EU) 2015/1095 aimed to
be covered
Annex ZE (informative) - Relationship between this European
Standard and the ecodesign requirements of COMMISSION
REGULATION (EU) 2016/2281, of 30 November 2016,
implementing Directive 2009/125/EC of the European
Parliament and of the Council establishing a framework for
the setting of ecodesign requirements for energy-related
products, with regard to ecodesign requirements for air
heating products, cooling products, high temperature
process chillers and fan coil units aimed to be covered
Bibliography
BS EN 14825.
Committee |
RHE/17
|
DocumentType |
Draft
|
Pages |
132
|
PublisherName |
British Standards Institution
|
Status |
NA
|
Standards | Relationship |
PREN 14825 : DRAFT 2017 | Identical |
EN 15502-1:2012+A1:2015 | Gas-fired heating boilers - Part 1: General requirements and tests |
EN 304:2017 | Heating boilers - Test code for heating boilers for atomizing oil burners |
EN 267:2009+A1:2011 | Automatic forced draught burners for liquid fuels |
EN 303-2:2017 | Heating boilers - Part 2: Heating boilers with forced draught burners - Special requirements for boilers with atomizing oil burners |
EN 15879-1:2011 | Testing and rating of direct exchange ground coupled heat pumps with electrically driven compressors for space heating and/or cooling - Part 1: Direct exchange-to-water heat pumps |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.